arXiv subjects

Mohammadhosein Safari

Publications and source records attributed to Mohammadhosein Safari.

4 recordsLinked to original sources

arXiv2026

Residual Bias Compensation Dual Extended Kalman Filter for Physics-Based SOC Estimation in Lithium Iron Phosphate Batteries

This paper addresses state of charge (SOC) estimation for lithium iron phosphate (LFP) batteries, where the relatively flat open-circuit voltage (OCV-SOC) characteristic reduces observability. A residual bias compensation dual extended Kalman filter (RBC-DEKF) is developed. Unlike conventional bias compensation methods that treat the bias as an augmented state within a single filter, the proposed dual-filter structure decouples residual bias estimation from electrochemical state estimation. One EKF estimates the system states of a control-oriented parameter-grouped single particle model with thermal effects, while the other EKF estimates a residual bias that continuously corrects the voltage observation equation, thereby refining the model-predicted voltage in real time. Unlike bias-augmented single-filter schemes that enlarge the covariance coupling, the decoupled bias estimator refines the voltage observation without perturbing electrochemical state dynamics. Validation is conducted on an LFP cell from a public dataset under three representative operating conditions: US06 at 0 degC, DST at 25 degC, and FUDS at 50 degC. Compared with a conventional EKF using the same model and identical state filter settings, the proposed method reduces the average SOC RMSE from 3.75% to 0.20% and the voltage RMSE between the filtered model voltage and the measured voltage from 32.8 mV to 0.8 mV. The improvement is most evident in the mid-SOC range where the OCV-SOC curve is flat, confirming that residual bias compensation significantly enhances accuracy for model-based SOC estimation of LFP batteries across a wide temperature range.

eess.SY↗

arXiv2026

When voltage sensors fail: Electrochemically constrained fault-tolerant state estimation for flat-plateau LFP batteries

The flat voltage plateau of lithium iron phosphate (LFP)/graphite cells makes electrochemical-state errors and voltage-measurement abnormalities produce similar innovations, complicating state-of-charge (SOC) estimation. This work proposes an electrochemically constrained residual-bias compensation dual extended Kalman filter (RBC-DEKF) with uncertain-initialization commissioning. A thermal control-oriented parameter-grouped single-particle model (CPG-SPMT) provides paired-electrode dynamics and terminal-voltage prediction, while a separately configurable voltage-discrepancy state accommodates systematic residuals. When the initial SOC is uncertain, residual adaptation is suspended over a verified-healthy startup window. Buffered data support electrochemically constrained trajectory matching, followed by calibrated state replay and residual-channel reactivation. Frozen cross-cycle healthy-residual calibration supports commissioning and remains in the voltage prediction after handover. Evaluation covers 216 additive-bias and 168 multiplicative-gain profiles over 24 A123 temperature-drive-cycle trajectories. Relative to Single-EKF, the original RBC-DEKF reduces mean SOC RMSE from 7.646 to 0.170 percentage points for additive bias and from 22.646 to 0.356 percentage points for gain faults. Separately, 18 nonzero-initial-error profiles on three representative 50%-SOC-anchored segments give a full-record mean SOC RMSE of 1.747 percentage points, including startup, for the commissioned realization, versus 11.192 and 11.400 for the always-on RBC-DEKF and conventional joint EKF. Representative delayed bias, 10-s ramp, and gain tests show that the corrected SOC trajectory remains stable after fault introduction. The central contribution is electrochemically constrained temporal coordination of uncertain-state recovery and subsequent voltage-discrepancy accommodation.

eess.SY↗

arXiv2026

Physics-guided residual Kalman learning for state-of-charge estimation of lithium iron phosphate batteries

Accurate state of charge (SOC) estimation of lithium iron phosphate (LFP) batteries remains challenging because of their flat open-circuit-voltage (OCV)-SOC characteristics, temperature-dependent dynamics, and sensitivity to initialization errors. Here, we propose a physics-guided residual Kalman learning (PRKL) framework for electrochemical-model-based SOC estimation. PRKL combines a control-oriented single-particle-model-based extended Kalman filter (EKF), which provides recursive physical state propagation, with a gated recurrent unit (GRU) residual learner that compensates structured EKF errors using electrochemical states and measurement features. The framework is evaluated on a public graphite/LFP dataset covering three dynamic drive cycles, eight temperatures from -10 to 50 degrees C, and initialization offsets up to 20 percent. Using dynamic stress test (DST) and federal urban driving schedule (FUDS) cycles for training and the supplemental federal test procedure (US06) cycle for cross-profile testing within the same cell dataset, PRKL achieves a global average root mean square error (RMSE) of 1.19 percent, corresponding to a 77 percent reduction relative to the physics-only EKF. These results show that electrochemical state information can guide residual learning and improve recursive SOC estimation for LFP batteries. The present validation supports cross-profile robustness within the studied dataset and provides a basis for future cross-cell, ageing-aware, and embedded-platform validation.

eess.SY↗

arXiv2025

Stability-Guaranteed Dual Kalman Filtering for Electrochemical Battery State Estimation

Accurate and stable state estimation is critical for battery management. Although dual Kalman filtering can jointly estimate states and parameters, the strong coupling between filters may cause divergence under large initialization errors or model mismatch. This paper proposes a Stability Guaranteed Dual Kalman Filtering (SG-DKF) method. A Lyapunov-based analysis yields a sufficient stability condition, leading to an adaptive dead-zone rule that suspends parameter updates when the innovation exceeds a stability bound. Applied to an electrochemical battery model, SG-DKF achieves accuracy comparable to a dual EKF and reduces state of charge RMSE by over 45% under large initial state errors.

eess.SY↗