arXiv subjects

Mohsen Asle Zaeem

Publications and source records attributed to Mohsen Asle Zaeem.

8 recordsLinked to original sources

arXiv2021

Effects of Applied Load on Formation and Reorientation of Zirconium Hydrides: A Multiphase Field Modeling Study

The effects of applied load on the formation and reorientation of delta hydrides in alpha-zirconium matrix are studied by a multiphase field model. Simulations with only one hydride seed indicate that the hydride reorientation occurs only when a tensile or compressive strain of ~0.02 is applied along [112-0] (hoop or circumferential direction) or [0001] (radial direction aligned with the basal pole direction), respectively. However, two-seed and multi-seed hydride simulations show the significant influence of neighboring hydrides on the required load for reorientation, reducing it by more than one order of magnitude and making it comparable to the experimental results. Through phase-field simulations, this work suggests that the hydride reorientation happens more easily when clusters of hydrides are present, and the required external load for reorientation is within the elastic limit of the cladding material.

cond-mat.mtrl-sci↗

arXiv2019

Fatigue-resistant high-performance elastocaloric materials via additive manufacturing

Elastocaloric cooling, which exploits the latent heat released and absorbed as stress-induced phase transformations are reversibly cycled in shape memory alloys, has recently emerged as a frontrunner in non-vapor-compression cooling technologies. The intrinsically high thermodynamic efficiency of elastocaloric materials is limited only by work hysteresis. Here, we report on creating high-performance low-hysteresis elastocaloric cooling materials via additive manufacturing of Titanium-Nickel (Ti-Ni) alloys. Contrary to established knowledge of the physical metallurgy of Ti-Ni alloys, intermetallic phases are found to be beneficial to elastocaloric performances when they are combined with the binary Ti-Ni compound in nanocomposite configurations. The resulting microstructure gives rise to quasi-linear stress-strain behaviors with extremely small hysteresis, leading to enhancement in the materials efficiency by a factor of five. Furthermore, despite being composed of more than 50% intermetallic phases, the reversible, repeatable elastocaloric performance of this material is shown to be stable over one million cycles. This result opens the door for direct implementation of additive manufacturing to elastocaloric cooling systems where versatile design strategy enables both topology optimization of heat exchangers as well as unique microstructural control of metallic refrigerants.

cond-mat.mtrl-sci↗

arXiv2018

Nanoscale Self-Healing Mechanisms in Shape Memory Ceramics

Shape memory (SM) ceramics, such as yttria-stabilized tetragonal zirconia (YSTZ), are a unique family of SM materials that offer unique properties including ultra-high operating temperature, and high resistance to chemical corrosion and oxidation. However, formation of defects is usually observed in SM ceramics during manufacturing and/or by mechanical deformation. To fully take advantage of the SM properties of these ceramics, it is necessary to fully understand the nano-structural evolution of defects under external stimuli. In this study, defect closure behaviors in YSTZ nanopillars are investigated by atomistic simulations. Two characteristic orientations of [011-] and [001] are selected to represent the dominant deformation mechanisms of phase transformation and dislocation migration, respectively. With the presence of crack and void, the strength and yield strain of nanopillars are noted to decrease significantly, especially for [011-]-oriented YSTZ nanopillars. Volume expansion associated with the tetragonal to monoclinic phase transformation is observed to promote healing of crack and void. Atom stress analyses reveal stress concentrations along the newly formed monoclinic phase bands. A critical crack width is identified, less than which the crack can be fully closed in compression. Size effect study reveals that an increase in nanopillar size has a positive effect on crack self-healing behavior. For [001]-oriented YSTZ nanopillars, dislocation migration leads to formations of an amorphous phase, which also assist the crack and void closure process. The revealed crack/void healing mechanisms may provide a path for mitigating internal defects that influences the mechanical properties and deformation mechanisms of SM ceramics.

cond-mat.mtrl-sci↗

arXiv2018

Understanding Specimen- and Grain-Size Effects on Nanoscale Plastic Deformation Mechanisms and Mechanical Properties of Polycrystalline Yttria-Stabilized Tetragonal Zirconia Nanopillars

Specimen- and grain-size effects on nanoscale plastic deformation mechanisms and mechanical properties of polycrystalline yttria-stabilized tetragonal zirconia (YSTZ) nanopillars are studied by molecular dynamics simulations. Through uniaxial compression of YSTZ columnar nanopillars, intergranular and transgranular deformation mechanisms are investigated. Cooperative intergranular deformations including grain boundary sliding and migration, grain rotation, and amorphous phase formation at grain boundaries are revealed. Results also reveal formation of partial dislocations, which act as splitters of large grains and play a significant role in facilitating the rotation of grains, and consequently promote amorphous-to-crystalline phase transition in-between neighboring grains. An increase in free surface-to-volume ratio is found to be responsible for specimen size-induced softening phenomenon, where a decrease in Young modulus and strength is observed when the specimen width decreases from 30 nm to 10 nm. Also, a decrease in Young modulus and strength is revealed with the decrease of average grain size from 15 nm to 5 nm. Grain boundary density is identified to be responsible for the observed grain size-induced softening behavior in polycrystalline YSTZ nanopillars. A transition in dominant deformation mechanism is observed from amorphous phase formation at grain boundaries to a competition between intergranular grain boundary sliding and transgranular phase transformation. Furthermore, an inverse Hall-Petch relationship is revealed describing the correlation between grain size and strength for polycrystalline YSTZ nanopillars with grain sizes below 15 nm.

cond-mat.mtrl-sci↗

arXiv2018

Superior Structural, Elastic and Electronic Properties of 2D Titanium Nitride MXenes Over Carbide MXenes: A Comprehensive First Principles Study

The structural, elastic and electronic properties of two-dimensional (2D) titanium carbide/nitride based pristine (Tin+1Cn/Tin+1Nn) and functionalized MXenes (Tin+1CnT2/Tin+1NnT2, T stands for the terminal groups: -F, -O and -OH, n = 1, 2, 3) are investigated by density functional theory calculations. Carbide-based MXenes possess larger lattice constants and monolayer thicknesses than nitride-based MXenes. The in-plane Young's moduli of Tin+1Nn are larger than those of Tin+1Cn, whereas in both systems they decrease with the increase of the monolayer thickness. Cohesive energy calculations indicate that MXenes with a larger monolayer thickness have a better structural stability. Adsorption energy calculations imply that Tin+1Nn have stronger preference to adhere to the terminal groups, which suggests more active surfaces for nitride-based MXenes. More importantly, nearly free electron states are observed to exist outside the surfaces of -OH functionalized carbide/nitride based MXenes, especially in Tin+1Nn(OH)2, which provide almost perfect transmission channels without nuclear scattering for electron transport. The overall electrical conductivity of nitride-based MXenes is determined to be higher than that of carbide-based MXenes. The exceptional properties of titanium nitride-based MXenes, including strong surface adsorption, high elastic constant and Young's modulus, and good metallic conductivity, make them promising materials for catalysis and energy storage applications.

cond-mat.mtrl-sci↗

arXiv2017

Understanding Homogeneous Nucleation in Solidification of Aluminum by Molecular Dynamics Simulations

Homogeneous nucleation from aluminum (Al) melt was investigated by million-atom molecular dynamics (MD) simulations utilizing the second nearest neighbor modified embedded atom method (MEAM) potentials. The natural spontaneous homogenous nucleation from the Al melt was produced without any influence of pressure, free surface effects and impurities. Initially isothermal crystal nucleation from undercooled melt was studied at different constant temperatures, and later superheated Al melt was quenched with different cooling rates. The crystal structure of nuclei, critical nucleus size, critical temperature for homogenous nucleation, induction time, and nucleation rate were determined. The quenching simulations clearly revealed three temperature regimes: sub-critical nucleation, super-critical nucleation, and solid-state grain growth regimes. The main crystalline phase was identified as face-centered cubic (fcc), but a hexagonal close-packed (hcp) and an amorphous solid phase were also detected. The hcp phase was created due to the formation of stacking faults during solidification of Al melt. By slowing down the cooling rate, the volume fraction of hcp and amorphous phases decreased. After the box was completely solid, grain growth was simulated and the grain growth exponent was determined for different annealing temperatures.

cond-mat.mtrl-sci↗

arXiv2016

Competing Mechanisms between Dislocation and Phase Transformation in Plastic Deformation of Single Crystalline Yttria-Stabilized Tetragonal Zirconia Nanopillars

Molecular dynamics (MD) is employed to investigate the plastic deformation mechanisms of single crystalline yttria-stabilized tetragonal zirconia (YSTZ) nanopillars under uniaxial compression. Simulation results show that the nanoscale plastic deformation of YSTZ is strongly dependent on the crystallographic orientation of zirconia nanopillars. For the first time, the experimental explored tetragonal to monoclinic phase transformation is reproduced by MD simulations in some particular loading directions. Three distinct mechanisms of dislocation, phase transformation, and a combination of dislocation and phase transformation are identified when applying compressive loading along different directions. The strength of zirconia nanopillars exhibits a sensitive behavior depending on the failure mechanisms, such that the dislocation-mediated deformation leads to the lowest strength, while the phase transformation-dominated deformation results in the highest strength.

cond-mat.mtrl-sci↗

arXiv2016

Revisiting Phase Diagrams of Two-Mode Phase-Field Crystal Models

In this work, phase diagrams of a modified two-mode phase-field crystal (PFC) that show two-dimensional (2D) and three-dimensional (3D) crystallographic structures were determined by utilizing a free energy minimization method. In this study the modified two-mode PFC model (presented by E. Asadi and M. Asle Zaeem, Comput. Mater. Sci. 2015) was used, in which the free energy can be exactly minimized in each stable crystal structure allowing calculation of accurate phase diagrams for two-mode PFC models. Different crystal structures, such as square, triangle, body-centered cubic (bcc), face-centered cubic (fcc), and stripe lattice structures as well as their coexistence regions were considered in the calculations. The model parameters were discussed to calculate phase diagrams that can be used as a guideline by other researchers for studying solidification and solid state phase transformation using two-mode PFC model.

cond-mat.mtrl-sci↗