arXiv subjects

Mohsen Fayyaz

Publications and source records attributed to Mohsen Fayyaz.

At least 19 recordsLinked to original sources

arXiv2026

STRIVE: Structured Spatiotemporal Exploration for Reinforcement Learning in Video Question Answering

We introduce STRIVE (SpatioTemporal Reinforcement with Importance-aware Variant Exploration), a structured reinforcement learning framework for video question answering. While group-based policy optimization methods have shown promise in large multimodal models, they often suffer from low reward variance when responses exhibit similar correctness, leading to weak or unstable advantage estimates. STRIVE addresses this limitation by constructing multiple spatiotemporal variants of each input video and performing joint normalization across both textual generations and visual variants. By expanding group comparisons beyond linguistic diversity to structured visual perturbations, STRIVE enriches reward signals and promotes more stable and informative policy updates. To ensure exploration remains semantically grounded, we introduce an importance-aware sampling mechanism that prioritizes frames most relevant to the input question while preserving temporal coverage. This design encourages robust reasoning across complementary visual perspectives rather than overfitting to a single spatiotemporal configuration. Experiments on six challenging video reasoning benchmarks including VideoMME, TempCompass, VideoMMMU, MMVU, VSI-Bench, and PerceptionTest demonstrate consistent improvements over strong reinforcement learning baselines across multiple large multimodal models. Our results highlight the role of structured spatiotemporal exploration as a principled mechanism for stabilizing multimodal reinforcement learning and improving video reasoning performance.

cs.CV↗

arXiv2026

Multilingual Routing in Mixture-of-Experts

Mixture-of-Experts (MoE) architectures have become the key to scaling modern LLMs, yet little is understood about how their sparse routing dynamics respond to multilingual data. In this work, we analyze expert routing patterns using parallel multilingual datasets and present highly interpretable layer-wise phenomena. We find that MoE models route tokens in language-specific ways in the early and late decoder layers but exhibit significant cross-lingual routing alignment in middle layers, mirroring parameter-sharing trends observed in dense LLMs. In particular, we reveal a clear, strong correlation between a model's performance in a given language and how similarly its tokens are routed to English in these layers. Extending beyond correlation, we explore inference-time interventions that induce higher cross-lingual routing alignment. We introduce a method that steers the router by promoting middle-layer task experts frequently activated in English, and it successfully increases multilingual performance. These 1-2% gains are remarkably consistent across two evaluation tasks, three models, and 15+ languages, especially given that these simple interventions override routers of extensively trained, state-of-the-art LLMs. In comparison, interventions outside of the middle layers or targeting multilingual-specialized experts only yield performance degradation. Altogether, we present numerous findings that explain how MoEs process non-English text and demonstrate that generalization is limited by the model's ability to leverage language-universal experts in all languages.

cs.CL↗

arXiv2026

Steering MoE LLMs via Expert (De)Activation

Mixture-of-Experts (MoE) in Large Language Models (LLMs) routes each token through a subset of specialized Feed-Forward Networks (FFN), known as experts. We present SteerMoE, a framework to steer MoE models by detecting and controlling behavior-associated experts. We detect key experts by comparing how often they activate between paired inputs that demonstrate opposite behaviors (e.g., safe vs. unsafe). By selectively activating or deactivating such experts during inference, we control behaviors like faithfulness and safety without fine-tuning. Across 11 benchmarks and 6 LLMs, our steering raises safety by up to +20% and faithfulness by +27%. Alternatively, unsafe steering drops safety by -41% alone, and -100% when combined with existing jailbreak methods, bypassing all safety guardrails. Overall, SteerMoE offers a lightweight, effective, and widely applicable test-time control, while revealing unique vulnerabilities in MoE LLMs. https://github.com/adobe-research/SteerMoE

cs.CL↗

arXiv2026

Polymorph: Energy-Efficient Multi-Label Classification for Video Streams on Embedded Devices

Real-time multi-label video classification on embedded devices is constrained by limited compute and energy budgets. Yet, video streams exhibit structural properties such as label sparsity, temporal continuity, and label co-occurrence that can be leveraged for more efficient inference. We introduce Polymorph, a context-aware framework that activates a minimal set of lightweight Low Rank Adapters (LoRA) per frame. Each adapter specializes in a subset of classes derived from co-occurrence patterns and is implemented as a LoRA weight over a shared backbone. At runtime, Polymorph dynamically selects and composes only the adapters needed to cover the active labels, avoiding full-model switching and weight merging. This modular strategy improves scalability while reducing latency and energy overhead. Polymorph achieves 40% lower energy consumption and improves mAP by 9 points over strong baselines on the TAO dataset. Polymorph is open source at https://github.com/inference-serving/polymorph/.

cs.CV↗

arXiv2025

DocSLM: A Small Vision-Language Model for Long Multimodal Document Understanding

Large Vision-Language Models (LVLMs) have demonstrated strong multimodal reasoning capabilities on long and complex documents. However, their high memory footprint makes them impractical for deployment on resource-constrained edge devices. We present DocSLM, an efficient Small Vision-Language Model designed for long-document understanding under constrained memory resources. DocSLM incorporates a Hierarchical Multimodal Compressor that jointly encodes visual, textual, and layout information from each page into a fixed-length sequence, greatly reducing memory consumption while preserving both local and global semantics. To enable scalable processing over arbitrarily long inputs, we introduce a Streaming Abstention mechanism that operates on document segments sequentially and filters low-confidence responses using an entropy-based uncertainty calibrator. Across multiple long multimodal document benchmarks, DocSLM matches or surpasses state-of-the-art methods while using 82\% fewer visual tokens, 75\% fewer parameters, and 71\% lower latency, delivering reliable multimodal document understanding on lightweight edge devices. Code and Model are available in https://github.com/Tanveer81/DocSLM.git.

cs.CV↗

arXiv2025

Enhancing Temporal Understanding in Video-LLMs through Stacked Temporal Attention in Vision Encoders

Despite significant advances in Multimodal Large Language Models (MLLMs), understanding complex temporal dynamics in videos remains a major challenge. Our experiments show that current Video Large Language Model (Video-LLM) architectures have critical limitations in temporal understanding, struggling with tasks that require detailed comprehension of action sequences and temporal progression. In this work, we propose a Video-LLM architecture that introduces stacked temporal attention modules directly within the vision encoder. This design incorporates a temporal attention in vision encoder, enabling the model to better capture the progression of actions and the relationships between frames before passing visual tokens to the LLM. Our results show that this approach significantly improves temporal reasoning and outperforms existing models in video question answering tasks, specifically in action recognition. We improve on benchmarks including VITATECS, MVBench, and Video-MME by up to +5.5%. By enhancing the vision encoder with temporal structure, we address a critical gap in video understanding for Video-LLMs. Project page and code are available at: https://alirasekh.github.io/STAVEQ2/.

cs.CV↗

arXiv2025

Collapse of Dense Retrievers: Short, Early, and Literal Biases Outranking Factual Evidence

Dense retrieval models are commonly used in Information Retrieval (IR) applications, such as Retrieval-Augmented Generation (RAG). Since they often serve as the first step in these systems, their robustness is critical to avoid downstream failures. In this work, we repurpose a relation extraction dataset (e.g., Re-DocRED) to design controlled experiments that quantify the impact of heuristic biases, such as a preference for shorter documents, on retrievers like Dragon+ and Contriever. We uncover major vulnerabilities, showing retrievers favor shorter documents, early positions, repeated entities, and literal matches, all while ignoring the answer's presence! Notably, when multiple biases combine, models exhibit catastrophic performance degradation, selecting the answer-containing document in less than 10% of cases over a synthetic biased document without the answer. Furthermore, we show that these biases have direct consequences for downstream applications like RAG, where retrieval-preferred documents can mislead LLMs, resulting in a 34% performance drop than providing no documents at all. https://huggingface.co/datasets/mohsenfayyaz/ColDeR

cs.CL↗

arXiv2025

MemLLM: Finetuning LLMs to Use An Explicit Read-Write Memory

While current large language models (LLMs) perform well on many knowledge-related tasks, they are limited by relying on their parameters as an implicit storage mechanism. As a result, they struggle with memorizing rare events and with updating their memory as facts change over time. In addition, the uninterpretable nature of parametric memory makes it challenging to prevent hallucination. Model editing and augmenting LLMs with parameters specialized for memory are only partial solutions. In this paper, we introduce MemLLM, a novel method of enhancing LLMs by integrating a structured and explicit read-and-write memory module. MemLLM tackles the aforementioned challenges by enabling dynamic interaction with the memory and improving the LLM's capabilities in using stored knowledge. Our experiments indicate that MemLLM enhances the LLM's performance and interpretability, in language modeling in general and knowledge-intensive tasks in particular. We see MemLLM as an important step towards making LLMs more grounded and factual through memory augmentation. The project repository is publicly available at https://github.com/amodaresi/MemLLM

cs.CL↗

arXiv2025

MRAG-Bench: Vision-Centric Evaluation for Retrieval-Augmented Multimodal Models

Existing multimodal retrieval benchmarks primarily focus on evaluating whether models can retrieve and utilize external textual knowledge for question answering. However, there are scenarios where retrieving visual information is either more beneficial or easier to access than textual data. In this paper, we introduce a multimodal retrieval-augmented generation benchmark, MRAG-Bench, in which we systematically identify and categorize scenarios where visually augmented knowledge is better than textual knowledge, for instance, more images from varying viewpoints. MRAG-Bench consists of 16,130 images and 1,353 human-annotated multiple-choice questions across 9 distinct scenarios. With MRAG-Bench, we conduct an evaluation of 10 open-source and 4 proprietary large vision-language models (LVLMs). Our results show that all LVLMs exhibit greater improvements when augmented with images compared to textual knowledge, confirming that MRAG-Bench is vision-centric. Additionally, we conduct extensive analysis with MRAG-Bench, which offers valuable insights into retrieval-augmented LVLMs. Notably, the top-performing model, GPT-4o, faces challenges in effectively leveraging retrieved knowledge, achieving only a 5.82% improvement with ground-truth information, in contrast to a 33.16% improvement observed in human participants. These findings highlight the importance of MRAG-Bench in encouraging the community to enhance LVLMs' ability to utilize retrieved visual knowledge more effectively.

cs.CV↗

arXiv2025

DeltaLLM: Compress LLMs with Low-Rank Deltas between Shared Weights

We introduce DeltaLLM, a new post-training compression technique to reduce the memory footprint of LLMs. We propose an alternative way of structuring LLMs with weight sharing between layers in subsequent Transformer blocks, along with additional low-rank difference matrices between them. For training, we adopt the progressing module replacement method and show that the lightweight training of the low-rank modules with approximately 30M-40M tokens is sufficient to achieve performance on par with LLMs of comparable sizes trained from scratch. We release the resultant models, DeltaLLAMA and DeltaPHI, with a 12% parameter reduction, retaining 90% of the performance of the base Llama and Phi models on common knowledge and reasoning benchmarks. Our method also outperforms compression techniques JointDrop, LaCo, ShortGPT and SliceGPT with the same number of parameters removed. For example, DeltaPhi 2.9B with a 24% reduction achieves similar average zero-shot accuracies as recovery fine-tuned SlicedPhi 3.3B with a 12% reduction, despite being approximately 400M parameters smaller with no fine-tuning applied. This work provides new insights into LLM architecture design and compression methods when storage space is critical.

cs.LG↗

arXiv2024

RET-LLM: Towards a General Read-Write Memory for Large Language Models

Large language models (LLMs) have significantly advanced the field of natural language processing (NLP) through their extensive parameters and comprehensive data utilization. However, existing LLMs lack a dedicated memory unit, limiting their ability to explicitly store and retrieve knowledge for various tasks. In this paper, we propose RET-LLM a novel framework that equips LLMs with a general write-read memory unit, allowing them to extract, store, and recall knowledge from the text as needed for task performance. Inspired by Davidsonian semantics theory, we extract and save knowledge in the form of triplets. The memory unit is designed to be scalable, aggregatable, updatable, and interpretable. Through qualitative evaluations, we demonstrate the superiority of our proposed framework over baseline approaches in question answering tasks. Moreover, our framework exhibits robust performance in handling temporal-based question answering tasks, showcasing its ability to effectively manage time-dependent information.

cs.CL↗

arXiv2024

Evaluating Human Alignment and Model Faithfulness of LLM Rationale

We study how well large language models (LLMs) explain their generations through rationales -- a set of tokens extracted from the input text that reflect the decision-making process of LLMs. Specifically, we systematically study rationales derived using two approaches: (1) popular prompting-based methods, where prompts are used to guide LLMs in generating rationales, and (2) technical attribution-based methods, which leverage attention or gradients to identify important tokens. Our analysis spans three classification datasets with annotated rationales, encompassing tasks with varying performance levels. While prompting-based self-explanations are widely used, our study reveals that these explanations are not always as "aligned" with the human rationale as attribution-based explanations. Even more so, fine-tuning LLMs to enhance classification task accuracy does not enhance the alignment of prompting-based rationales. Still, it does considerably improve the alignment of attribution-based methods (e.g., InputXGradient). More importantly, we show that prompting-based self-explanation is also less "faithful" than attribution-based explanations, failing to provide a reliable account of the model's decision-making process. To evaluate faithfulness, unlike prior studies that excluded misclassified examples, we evaluate all instances and also examine the impact of fine-tuning and accuracy on alignment and faithfulness. Our findings suggest that inconclusive faithfulness results reported in earlier studies may stem from low classification accuracy. These findings underscore the importance of more rigorous and comprehensive evaluations of LLM rationales.

cs.CL↗

arXiv2024

Occlusion Handling in 3D Human Pose Estimation with Perturbed Positional Encoding

Understanding human behavior fundamentally relies on accurate 3D human pose estimation. Graph Convolutional Networks (GCNs) have recently shown promising advancements, delivering state-of-the-art performance with rather lightweight architectures. In the context of graph-structured data, leveraging the eigenvectors of the graph Laplacian matrix for positional encoding is effective. Yet, the approach does not specify how to handle scenarios where edges in the input graph are missing. To this end, we propose a novel positional encoding technique, PerturbPE, that extracts consistent and regular components from the eigenbasis. Our method involves applying multiple perturbations and taking their average to extract the consistent and regular component from the eigenbasis. PerturbPE leverages the Rayleigh-Schrodinger Perturbation Theorem (RSPT) for calculating the perturbed eigenvectors. Employing this labeling technique enhances the robustness and generalizability of the model. Our results support our theoretical findings, e.g. our experimental analysis observed a performance enhancement of up to $12\%$ on the Human3.6M dataset in instances where occlusion resulted in the absence of one edge. Furthermore, our novel approach significantly enhances performance in scenarios where two edges are missing, setting a new benchmark for state-of-the-art.

cs.CV↗

arXiv2023

DecompX: Explaining Transformers Decisions by Propagating Token Decomposition

An emerging solution for explaining Transformer-based models is to use vector-based analysis on how the representations are formed. However, providing a faithful vector-based explanation for a multi-layer model could be challenging in three aspects: (1) Incorporating all components into the analysis, (2) Aggregating the layer dynamics to determine the information flow and mixture throughout the entire model, and (3) Identifying the connection between the vector-based analysis and the model's predictions. In this paper, we present DecompX to tackle these challenges. DecompX is based on the construction of decomposed token representations and their successive propagation throughout the model without mixing them in between layers. Additionally, our proposal provides multiple advantages over existing solutions for its inclusion of all encoder components (especially nonlinear feed-forward networks) and the classification head. The former allows acquiring precise vectors while the latter transforms the decomposition into meaningful prediction-based values, eliminating the need for norm- or summation-based vector aggregation. According to the standard faithfulness evaluations, DecompX consistently outperforms existing gradient-based and vector-based approaches on various datasets. Our code is available at https://github.com/mohsenfayyaz/DecompX.

cs.CL↗

arXiv2023

Diffusion Models for Medical Image Analysis: A Comprehensive Survey

Denoising diffusion models, a class of generative models, have garnered immense interest lately in various deep-learning problems. A diffusion probabilistic model defines a forward diffusion stage where the input data is gradually perturbed over several steps by adding Gaussian noise and then learns to reverse the diffusion process to retrieve the desired noise-free data from noisy data samples. Diffusion models are widely appreciated for their strong mode coverage and quality of the generated samples despite their known computational burdens. Capitalizing on the advances in computer vision, the field of medical imaging has also observed a growing interest in diffusion models. To help the researcher navigate this profusion, this survey intends to provide a comprehensive overview of diffusion models in the discipline of medical image analysis. Specifically, we introduce the solid theoretical foundation and fundamental concepts behind diffusion models and the three generic diffusion modelling frameworks: diffusion probabilistic models, noise-conditioned score networks, and stochastic differential equations. Then, we provide a systematic taxonomy of diffusion models in the medical domain and propose a multi-perspective categorization based on their application, imaging modality, organ of interest, and algorithms. To this end, we cover extensive applications of diffusion models in the medical domain. Furthermore, we emphasize the practical use case of some selected approaches, and then we discuss the limitations of the diffusion models in the medical domain and propose several directions to fulfill the demands of this field. Finally, we gather the overviewed studies with their available open-source implementations at https://github.com/amirhossein-kz/Awesome-Diffusion-Models-in-Medical-Imaging.

eess.IV↗

arXiv2023

Lets keep it simple, Using simple architectures to outperform deeper and more complex architectures

Major winning Convolutional Neural Networks (CNNs), such as AlexNet, VGGNet, ResNet, GoogleNet, include tens to hundreds of millions of parameters, which impose considerable computation and memory overhead. This limits their practical use for training, optimization and memory efficiency. On the contrary, light-weight architectures, being proposed to address this issue, mainly suffer from low accuracy. These inefficiencies mostly stem from following an ad hoc procedure. We propose a simple architecture, called SimpleNet, based on a set of designing principles, with which we empirically show, a well-crafted yet simple and reasonably deep architecture can perform on par with deeper and more complex architectures. SimpleNet provides a good tradeoff between the computation/memory efficiency and the accuracy. Our simple 13-layer architecture outperforms most of the deeper and complex architectures to date such as VGGNet, ResNet, and GoogleNet on several well-known benchmarks while having 2 to 25 times fewer number of parameters and operations. This makes it very handy for embedded systems or systems with computational and memory limitations. We achieved state-of-the-art result on CIFAR10 outperforming several heavier architectures, near state of the art on MNIST and competitive results on CIFAR100 and SVHN. We also outperformed the much larger and deeper architectures such as VGGNet and popular variants of ResNets among others on the ImageNet dataset. Models are made available at: https://github.com/Coderx7/SimpleNet

cs.CV↗

arXiv2022

BERT on a Data Diet: Finding Important Examples by Gradient-Based Pruning

Current pre-trained language models rely on large datasets for achieving state-of-the-art performance. However, past research has shown that not all examples in a dataset are equally important during training. In fact, it is sometimes possible to prune a considerable fraction of the training set while maintaining the test performance. Established on standard vision benchmarks, two gradient-based scoring metrics for finding important examples are GraNd and its estimated version, EL2N. In this work, we employ these two metrics for the first time in NLP. We demonstrate that these metrics need to be computed after at least one epoch of fine-tuning and they are not reliable in early steps. Furthermore, we show that by pruning a small portion of the examples with the highest GraNd/EL2N scores, we can not only preserve the test accuracy, but also surpass it. This paper details adjustments and implementation choices which enable GraNd and EL2N to be applied to NLP.

cs.CL↗

arXiv2022

TaylorSwiftNet: Taylor Driven Temporal Modeling for Swift Future Frame Prediction

While recurrent neural networks (RNNs) demonstrate outstanding capabilities for future video frame prediction, they model dynamics in a discrete time space, i.e., they predict the frames sequentially with a fixed temporal step. RNNs are therefore prone to accumulate the error as the number of future frames increases. In contrast, partial differential equations (PDEs) model physical phenomena like dynamics in a continuous time space. However, the estimated PDE for frame forecasting needs to be numerically solved, which is done by discretization of the PDE and diminishes most of the advantages compared to discrete models. In this work, we, therefore, propose to approximate the motion in a video by a continuous function using the Taylor series. To this end, we introduce TaylorSwiftNet, a novel convolutional neural network that learns to estimate the higher order terms of the Taylor series for a given input video. TaylorSwiftNet can swiftly predict future frames in parallel and it allows to change the temporal resolution of the forecast frames on-the-fly. The experimental results on various datasets demonstrate the superiority of our model.

cs.CV↗