arXiv subjects

Monica F. Craciun

Publications and source records attributed to Monica F. Craciun.

18 recordsLinked to original sources

arXiv2018

Strain-engineering of twist-angle in graphene/hBN superlattice devices

The observation of novel physical phenomena such as Hofstadter's butterfly, topological currents and unconventional superconductivity in graphene have been enabled by the replacement of SiO$_2$ with hexagonal Boron Nitride (hBN) as a substrate and by the ability to form superlattices in graphene/hBN heterostructures. These devices are commonly made by etching the graphene into a Hall-bar shape with metal contacts. The deposition of metal electrodes, the design and specific configuration of contacts can have profound effects on the electronic properties of the devices possibly even affecting the alignment of graphene/hBN superlattices. In this work we probe the strain configuration of graphene on hBN contacted with two types of metal contacts, two-dimensional (2D) top-contacts and one-dimensional (1D) edge-contacts. We show that top-contacts induce strain in the graphene layer along two opposing leads, leading to a complex strain pattern across the device channel. Edge-contacts, on the contrary, do not show such strain pattern. A finite-elements modelling simulation is used to confirm that the observed strain pattern is generated by the mechanical action of the metal contacts clamped to the graphene. Thermal annealing is shown to reduce the overall doping whilst increasing the overall strain, indicating and increased interaction between graphene and hBN. Surprisingly, we find that the two contacts configurations lead to different twist-angles in graphene/hBN superlattices, which converge to the same value after thermal annealing. This observation confirms the self-locking mechanism of graphene/hBN superlattices also in the presence of strain gradients. Our experiments may have profound implications in the development of future electronic devices based on heterostructures and provide a new mechanism to induce complex strain patterns in 2D materials.

cond-mat.mes-hall↗

arXiv2018

Graphene-based light sensing: fabrication, characterisation, physical properties and performance

Graphene and graphene-based materials exhibit exceptional optical and electrical properties with great promise for novel applications in light detection. However, several challenges prevent the full exploitation of these properties in commercial devices. Such challenges include the limited linear dynamic range (LDR) of graphene-based photodetectors, the lack of efficient generation and extraction of photoexcited charges, the smearing of photoactive junctions due to hot-carriers effects, large-scale fabrication and ultimately the environmental stability of the constituent materials. In order to overcome the aforementioned limits, different approaches to tune the properties of graphene have been explored. A new class of graphene-based devices has emerged where chemical functionalisation, hybridisation with light-sensitising materials and the formation of heterostructures with other 2D materials have led to improved performance, stability or versatility. For example, intercalation of graphene with FeCl$_3$ is highly stable in ambient conditions and can be used to define photo-active junctions characterized by an unprecedented LDR while graphene oxide (GO) is a very scalable and versatile material which supports the photodetection from UV to THz frequencies. Nanoparticles and quantum dots have been used to enhance the absorption of pristine graphene and to enable high gain thanks to the photogating effect. In the same way, hybrid detectors made from stacked sequences of graphene and layered transition-metal dichalcogenides enabled a class of detectors with high gain and responsivity. In this work we will review the performance and advances in functionalised graphene and hybrid photodetectors, with particular focus on the physical mechanisms governing the photoresponse in these materials, their performance and possible future paths of investigation.

cond-mat.mtrl-sci↗

arXiv2018

Magnetically Tunable Chirality in 2D Liquid Crystalline WS2 Nanocomposites

The first observation of tungsten disulfide liquid crystalline nanocomposites in dispersions of liquid phase-exfoliated flakes is demonstrated in a range of organic solvents. The nanocomposites demonstrate significant birefringence and reconfigurable optical chirality as observed in the linear and circular dichroism measurements respectively. Under an applied magnetic field of +/-1.5T the chirality can be switched ON/OFF, while the wavelength range for switching can be tuned from large to narrow range by the proper selection of the host solvent. In combination with photoluminescence capabilities of WS2, this opens a pathway to a wide variety of applications, such as deposition of highly uniform films over large areas for photovoltaic devices, as shown here.

cond-mat.mtrl-sci↗

arXiv2018

Sub 20 meV Schottky barriers in metal/MoTe2 junctions

The newly emerging class of atomically-thin materials has shown a high potential for the realisation of novel electronic and optoelectronic components. Amongst this family, semiconducting transition metal dichalcogenides (TMDCs) are of particular interest. While their band gaps are compatible with those of conventional solid state devices, they present a wide range of exciting new properties that is bound to become a crucial ingredient in the future of electronics. To utilise these properties for the prospect of electronics in general, and long-wavelength-based photodetectors in particular, the Schottky barriers formed upon contact with a metal and the contact resistance that arises at these interfaces have to be measured and controlled. We present experimental evidence for the formation of Schottky barriers as low as 10 meV between MoTe2 and metal electrodes. By varying the electrode work functions, we demonstrate that Fermi level pinning due to metal induced gap states at the interfaces occurs at 0.14 eV above the valence band maximum. In this configuration, thermionic emission is observed for the first time at temperatures between 40 K and 75 K. Finally, we discuss the ability to tune the barrier height using a gate electrode.

cond-mat.mes-hall↗

arXiv2018

Novel circuit design for high-impedance and non-local electrical measurements of two-dimensional materials

Two-dimensional materials offer a novel platform for the development of future quantum technologies. However, the electrical characterisation of topological insulating states, non-local resistance and bandgap tuning in atomically-thin materials, can be strongly affected by spurious signals arising from the measuring electronics. Common-mode voltages, dielectric leakage in the coaxial cables and the limited input impedance of alternate-current amplifiers can mask the true nature of such high-impedance states. Here, we present an optical isolator circuit which grants access to such states by electrically decoupling the current-injection from the voltage-sensing circuitry. We benchmark our apparatus against two state-of-the-art measurements: the non-local resistance of a graphene Hall bar and the transfer characteristic of a WS2 field-effect transistor. Our system allows the quick characterisation of novel insulating states in two-dimensional materials with potential applications in future quantum technologies.

physics.ins-det↗

arXiv2018

Strain-engineered inverse charge-funnelling in layered semiconductors

The control of charges in a circuit due to an external electric field is ubiquitous to the exchange, storage and manipulation of information in a wide range of applications, from electronic circuits to synapses in neural cells. Conversely, the ability to grow clean interfaces between materials has been a stepping stone for engineering built-in electric fields largely exploited in modern photovoltaics and opto-electronics. The emergence of atomically thin semiconductors is now enabling new ways to attain electric fields and unveil novel charge transport mechanisms. Here, we report the first direct electrical observation of the inverse charge-funnel effect enabled by deterministic and spatially resolved strain-induced electric fields in a thin sheet of HfS2. We demonstrate that charges driven by these spatially varying electric fields in the channel of a phototransistor lead to a 350% enhancement in the responsivity. These findings could enable the informed design of highly efficient photovoltaic cells.

physics.app-ph↗

arXiv2017

Highly efficient rubrene-graphene charge transfer interfaces as phototransistors in the visible regime

Atomically thin materials such as graphene are uniquely responsive to charge transfer from adjacent materials, making them ideal charge transport layers in phototransistor devices. Effective implementation of organic semiconductors as a photoactive layer would open up a multitude of applications in biomimetic circuitry and ultra-broadband imaging but polycrystalline and amorphous thin films have shown inferior performance compared to inorganic semiconductors. Here, we utilize the long-range order in rubrene single crystals to engineer organic semiconductor-graphene phototransistors surpassing previously reported photo-gating efficiencies by one order of magnitude. Phototransistors based upon these interfaces are spectrally selective to visible wavelengths and, through photoconductive gain mechanisms, achieve responsivity as large as 10^7 A/W and a detectivity of 1.5 10^9 Jones at room temperature. These findings point towards implementing low-cost, flexible materials for amplified imaging at ultra-low light levels.

physics.app-ph↗

arXiv2017

High-Mobility and High-Optical Quality Atomically Thin WS2

The rise of atomically thin materials has the potential to enable a paradigm shift in modern technologies by introducing multi-functional materials in the semiconductor industry. To date the growth of high quality atomically thin semiconductors (e.g. WS2) is one of the most pressing challenges to unleash the potential of these materials and the growth of mono- or bi-layers with high crystal quality is yet to see its full realization. Here, we show that the novel use of molecular precursors in the controlled synthesis of mono- and bi-layer WS2 leads to superior material quality compared to the widely used topotactic transformation of WO3-based precursors. Record high room temperature charge carrier mobility up to 52 cm2/Vs and ultra-sharp photoluminescence linewidth of just 36 meV over submillimeter areas demonstrate that the quality of this material supersedes also that of naturally occurring materials. By exploiting surface diffusion kinetics of W and S species adsorbed onto a substrate, a deterministic layer thickness control has also been achieved promoting the design of scalable synthesis routes.

cond-mat.mtrl-sci↗

arXiv2017

Extraordinary linear dynamic range in laser-defined functionalized graphene photodetectors

Graphene-based photodetectors have demonstrated mechanical flexibility, large operating bandwidth, and broadband spectral response. However, their linear dynamic range (LDR) is limited by graphene's intrinsichot-carrier dynamics, which causes deviation from a linear photoresponse at low incident powers. At the same time, multiplication of hot carriers causes the photoactive region to be smeared over distances of a few micro-meters, limiting the use of graphene in high-resolution applications. We present a novel method for engineer-ing photoactive junctions in FeCl3-intercalated graphene using laser irradiation. Photocurrent measured at these planar junctions shows an extraordinary linear response with an LDR value at least 4500 times larger than that of other graphene devices (44 dB) while maintaining high stability against environmental contamination without the need for encapsulation. The observed photoresponse is purely photovoltaic, demonstrating complete quenching of hot-carrier effects. These results pave the way toward the design of ultrathin photode-tectors with unprecedented LDR for high-definition imaging and sensing.

cond-mat.mes-hall↗

arXiv2017

Fast and Highly Sensitive Ionic Polymer Gated WS$_2$-Graphene Photodetectors

The combination of graphene with semiconductor materials in heterostructure photodetectors, has enabled amplified detection of femtowatt light signals using micron-scale electronic devices. Presently, the speed of such detectors is limited by long-lived charge traps and impractical strategies, e.g. the use of large gate voltage pulses, have been employed to achieve bandwidths suitable for applications, such as video-frame-rate imaging. Here, we report atomically thin graphene-WS$_2$ heterostructure photodetectors encapsulated in an ionic polymer, which are uniquely able to operate at bandwidths up to 1.5 kHz, whilst maintaining internal gain as large as $10^6$. Highly mobile ions and a nanometre scale Debye length of the ionic polymer are used to screen charge traps and tune the Fermi level of graphene over an unprecedented range at the interface with WS$_2$. We observe a responsivity $R=10^6$ A W$^{-1}$ and detectivity $D^*=3.8\times10^{11}$ Jones, approaching that of single photon counters. The combination of both high responsivity and fast response times makes these photodetectors suitable for video-frame-rate imaging applications.

cond-mat.mes-hall↗

arXiv2017

An integrated and multi-purpose microscope for the characterization of atomically thin optoelectronic devices

Optoelectronic devices based on graphene and other two-dimensional (2D) materials, such as transition metal dichalcogenides (TMDs) are the focus of wide research interest. The characterization these emerging atomically thin materials and devices strongly relies on a set of measurements involving both optical and electronic instrumentation ranging from scanning photocurrent mapping to Raman and photoluminescence (PL) spectroscopy. Furthermore, proof-of-concept devices are usually fabricated from micro-meter size flakes, requiring microscopy techniques to characterize them. Current state-of-the-art commercial instruments offer the ability to characterize individual properties of these materials with no option for the in situ characterization of a wide enough range of complementary optical and electrical properties. Presently, the requirement to switch atomically-thin materials from one system to another often radically affects the properties of these uniquely sensitive materials through atmospheric contamination. Here, we present an integrated, multi-purpose instrument dedicated to the optical and electrical characterization of devices based on 2D materials which is able to perform low frequency electrical measurements, scanning photocurrent mapping, Raman, absorption and PL spectroscopy in one single set-up. We characterize this apparatus by performing multiple measurements on graphene, transition metal dichalcogenides (TMDs) and Si. The performance and resolution of each individual measurement technique is found to be equivalent to that of commercially available instruments. Contrary to nowadays commercial systems, a significant advantage of the developed instrument is that for the first time the integration of a wide range of complementary opto-electronic and spectroscopy characterization techniques is demonstrated in a single compact unit.

physics.ins-det↗

arXiv2017

Role of Charge Traps in the Performance of Atomically-Thin Transistors

Transient currents in atomically thin MoTe$_2$ field-effect transistor are measured during cycles of pulses through the gate electrode. The transients are analyzed in light of a newly proposed model for charge trapping dynamics that renders a time-dependent change in threshold voltage the dominant effect on the channel hysteretic behavior over emission currents from the charge traps. The proposed model is expected to be instrumental in understanding the fundamental physics that governs the performance of atomically thin FETs and is applicable to the entire class of atomically thin-based devices. Hence, the model is vital to the intelligent design of fast and highly efficient opto-electronic devices.

cond-mat.mes-hall↗

arXiv2016

Ultra-sensitive label-free in-situ detection of dynamically driven self-assembly of 2D nanoplatelets on SOI chip

Fluid dispersed two-dimensional (2D) composite materials with dynamically tunable functional properties have recently emerged as a novel highly promising class of optoelectronic materials, opening up new routes not only for the emerging field of metamaterials but also to chip-scale multifunctional metadevices. However, in-situ monitoring and detection of the dynamic ordering of 2D nanoparticles on chip and during the device operation is still a huge challenge. Here we introduce a novel approach for on-chip, in-situ Raman characterisation of 2D-fluid composite materials incorporated into Si photonics chip. In this work the Raman signal for 2D nanoplatelets is selectively enhanced by Fabry-Perot resonator design of CMOS photonic-compatible microfluidic channels. This has then been extended to demonstrate the first in-situ Raman detection of the dynamics of individual 2D nanoplatelets, within a microfluidic channel. Our work paves the way for the first practicable realisation of 3D photonic microstructure shaping based on 2D-fluid composites and CMOS photonics platform.

cond-mat.mtrl-sci↗

arXiv2015

Contact doping, Klein tunneling, and asymmetry of shot noise in suspended graphene

The inherent asymmetry of the electric transport in graphene is attributed to Klein tunneling across barriers defined by $\textit{pn}$-interfaces between positively and negatively charged regions. By combining conductance and shot noise experiments we determine the main characteristics of the tunneling barrier (height and slope) in a high-quality suspended sample with Au/Cr/Au contacts. We observe an asymmetric resistance $R_{\textrm{odd}}=100-70$ $Ω$ across the Dirac point of the suspended graphene at carrier density $|n_{\rm G}|=0.3-4 \cdot 10^{11}$ cm$^{-2}$, while the Fano factor displays a non-monotonic asymmetry in the range $F_{\textrm{odd}} \sim 0.03 - 0.1$. Our findings agree with analytical calculations based on the Dirac equation with a trapezoidal barrier. Comparison between the model and the data yields the barrier height for tunneling, an estimate of the thickness of the $\textit{pn}$-interface $d < 20$ nm, and the contact region doping corresponding to a Fermi level offset of $\sim - 18$ meV. The strength of pinning of the Fermi level under the metallic contact is characterized in terms of the contact capacitance $C_c=19 \times 10^{-6}$ F/cm$^2$. Additionally, we show that the gate voltage corresponding to the Dirac point is given by the work function difference between the backgate material and graphene.

cond-mat.mes-hall↗

arXiv2015

High quality monolayer graphene synthesized by resistive heating cold wall chemical vapour deposition

Emerging flexible and wearable technologies such as healthcare electronics and energy-harvest devices could be transformed by the unique properties of graphene. The vision for a graphene-driven industrial revolution is motivating intensive research on the synthesis of (1) high quality and (2) low cost graphene. Hot-wall chemical vapour deposition (CVD) is one of the most competitive growth methods, but its long processing times are incompatible with production lines. Here we demonstrate the growth of high quality monolayer graphene using a technique that is 100 times faster than standard hot-wall CVD, resulting in 99% reduction in production costs. A thorough complementary study of Raman spectroscopy, atomic force microscopy, scanning electron microscopy and electrical magneto-transport measurements shows that our cold wall CVD-grown graphene is of comparable quality to that of natural graphene. Finally, we demonstrate the first transparent and flexible graphene capacitive touch-sensor that could enable the development of artificial skin for robots.

cond-mat.mtrl-sci↗

arXiv2012

Novel highly conductive and transparent graphene based conductors

Future wearable electronics, displays and photovoltaic devices rely on highly conductive, transparent and yet mechanically flexible materials. Nowadays indium tin oxide (ITO) is the most wide spread transparent conductor in optoelectronic applications, however the mechanical rigidity of this material limits its use for future flexible devices. Here we report novel transparent conductors based on few layer graphene (FLG) intercalated with ferric chloride (FeCl3) with an outstandingly high electrical conductivity and optical transparency. We show that upon intercalation a record low sheet resistance of 8.8 Ohm/square is attained together with an optical transmittance higher than 84% in the visible range. These parameters outperform the best values of ITO and of other carbon-based materials, making these novel transparent conductors the best candidates for future flexible optoelectronics.

cond-mat.mtrl-sci↗

arXiv2012

Gate tunable non-linear currents in bilayer graphene diodes

Electric transport of double gated bilayer graphene devices is studied as a function of charge density and bandgap. A top gate electrode can be used to control locally the Fermi level to create a pn junction between the double-gated and single-gated region. These bilayer graphene pn diodes are characterized by non-linear currents and directional current rectification, and we show the rectified direction of the source-drain voltage can be controlled by using gate voltages. A systematic study of the pn junction characteristics allows to extract a gate-dependent bandgap value which ranges from 0 meV to 130 meV.

cond-mat.mes-hall↗

arXiv2010

Magneto-transport through graphene nano-ribbons

We investigate magneto-transport through graphene nano-ribbons as a function of gate and bias voltage, and temperature. We find that a magnetic field systematically leads to an increase of the conductance on a scale of a few tesla. This phenomenon is accompanied by a decrease in the energy scales associated to charging effects, and to hopping processes probed by temperature-dependent measurements. All the observations can be interpreted consistently in terms of strong-localization effects caused by the large disorder present, and exclude that the insulating state observed in nano-ribbons can be explained solely in terms of a true gap between valence and conduction band.

cond-mat.mes-hall↗