arXiv subjects

Morris Lindner

Publications and source records attributed to Morris Lindner.

11 recordsLinked to original sources

arXiv2026

Micron-sized magnonic 3-port rectilinear circulator

The development of miniaturized non-reciprocal microwave technologies compatible with integrated circuit architectures remains a critical challenge for modern information technology. Here, we present the first experimental characterization of a micron-sized prototypical magnon circulator. Taking advantage of the chiral excitation of spin-waves via nanowire gratings, we propose an original design of a circulator involving three channels of rectilinear and unidirectional spin-wave beams. We demonstrate via a full 3-port spin-wave spectroscopy a genuine spin-wave circulation between the three ports. The narrow frequency band of operation can be tuned over a broad range of frequencies ($2$-$8$ GHz) with both an external field of up to $100$ mT, and the dimensions of the grating specifying the wavevectors. This proposed scheme opens up possibilities for new architectures of integrated and miniaturized non-reciprocal microwave devices.

cond-mat.mes-hall↗

arXiv2026

Ultrafast formation of a large dynamic magnetic soliton

Nonlinear magnetization dynamics offers a rich variety of phenomena ranging from bistability to chaos. Here, we report the ultrafast formation of a dynamic magnetic soliton in thin ferrimagnetic garnet films with perpendicular magnetic anisotropy, driven by the microwave magnetic field of a microstrip antenna. Using time-resolved Brillouin light scattering microscopy and scanning transmission X-ray microscopy, we directly track the build-up of the large-angle precession state. The observed soliton is distinct from other nonlinear magnetic excitations in two key aspects: (i) it forms inside the linear spin-wave frequency band, and (ii) it is exceptionally large, reaching tens of microns beyond the antenna. We explain the soliton formation by the self-limiting mechanism upon a positive nonlinear frequency shift and the spatial extent of the near-field of the antenna. At large distances from the drive, the soliton collapses and emits short-wavelength spin waves via almost instantaneous spatial wavenumber conversion. Time-resolved measurements further reveal a small finite delay during soliton formation, while coherent long-range oscillations appear essentially simultaneously over distances up to 40 micrometers. These results establish microwave-driven solitons as a robust nonlinear phenomenon in thin-film garnets and suggest opportunities for fast, nonlocal manipulation of magnetic states and for applications in novel computational schemes.

cond-mat.mes-hall↗

arXiv2026

Nanoscale spin-wave frequency-selective limiter for 5G technology

Power limiters are essential devices in modern radio frequency (RF) communications systems to protect highly sensitive input channels from large incoming signals. Nowadays-used semiconductor limiters suffer from high electronic noise and switching delays when approaching the GHz range, which is crucial for the modern generation of 5G communication technologies aiming to operate at the EU 5G high band (24.25-27.5 GHz). The proposed solution is to use ferrite-based Frequency Selective Limiters (FSLs), which maintain their efficiency at high GHz frequencies, although they have only been studied at the macroscale so far. In this study, we demonstrate a proof of concept of nanoscale FSLs. The devices are based on spin-wave transmission affected by four-magnon scattering phenomena in a 97-nm-thin Yttrium Iron Garnet (YIG) film. Spin waves were excited and detected using coplanar waveguide (CPW) transducers of the smallest feature size of 250 nm. The FSLs are tested in the frequency range up to 25 GHz, and the key parameters are extracted (power threshold, power limiting level, insertion losses, bandwidth) for different spin-wave modes and transducer lengths. An analytical theory has been formulated to describe the fundamental physical processes, and a numerical model has been developed to quantitatively describe the insertion losses and power characteristics of the FSLs. Additionally, the perspective of the spin-wave devices is discussed, including the possibility of simultaneously integrating three devices into one: a frequency-selective limiter, an RF filter, and a delay line, allowing for more efficient use of space and energy.

cond-mat.other↗

arXiv2025

k-Selective Electrical-to-Magnon Transduction with Realistic Field-distributed Nanoantennas

The excitation and detection of propagating spin waves with lithographed nanoantennas underpin both classical magnonic circuits and emerging quantum technologies. Here, we establish a framework for all-electrical propagating spin-wave spectroscopy (AEPSWS) that links realistic electromagnetic drive fields to micromagnetic dynamics. Using finite-element (FE) simulations, we compute the full vector near-field of electrical impedance-matched, tapered coplanar and stripline antennas and import this distribution into finite-difference (FD) micromagnetic solvers. This approach captures the antenna-limited wave-vector spectrum and the component-selective driving fields (perpendicular to the static magnetisation) that simplified uniform-field models cannot. From this coupling, we derive how realistic current return paths and tapering shapes, k-weighting functions, for Damon-Eshbach surface spin waves in yttrium-iron-garnet (YIG) films are, for millimetre-scale matched CPWs and linear tapers down to nanometre-scale antennas. Validation against experimental AEPSWS on a $48\,nm$ YIG film shows quantitative agreement in dispersion ridges, group velocities, and spectral peak positions, establishing that the antenna acts as a tunable k-space filter. These results provide actionable design rules for on-chip magnonic transducers, with immediate relevance for low-power operation regimes and prospective applications in quantum magnonics.

cond-mat.mes-hall↗

arXiv2024

YIG/CoFeB bilayer magnonic diode

We demonstrate a magnonic diode based on a bilayer structure of Yttrium Iron Garnet (YIG) and Cobalt Iron Boron (CoFeB). The bilayer exhibits pronounced non-reciprocal spin-wave propagation, enabled by dipolar coupling and the magnetic properties of the two layers. The YIG layer provides low damping and efficient spin-wave propagation, while the CoFeB layer introduces strong magnetic anisotropy, critical for achieving diode functionality. Experimental results, supported by numerical simulations, show unidirectional propagation of Magnetostatic Surface Spin Waves (MSSW), significantly suppressing backscattered waves. This behavior was confirmed through wavevector-resolved and micro-focused Brillouin Light Scattering measurements and is supported by numerical simulations. The proposed YIG/SiO$_2$/CoFeB bilayer magnonic diode demonstrates the feasibility of leveraging non-reciprocal spin-wave dynamics for functional magnonic devices, paving the way for energy-efficient, wave-based signal processing technologies.

physics.app-ph↗

arXiv2024

Damping Enhancement in YIG at Millikelvin Temperatures due to GGG Substrate

Quantum magnonics aims to exploit the quantum mechanical properties of magnons for nanoscale quantum information technologies. Ferrimagnetic yttrium iron garnet (YIG), which offers the longest magnon lifetimes, is a key material typically grown on gadolinium gallium garnet (GGG) substrates for structural compatibility. However, the increased magnetic damping in YIG/GGG systems below 50$\,$K poses a challenge for quantum applications. Here, we study the damping in a 97$\,$nm-thick YIG film on a 500$\,\mu$m-thick GGG substrate at temperatures down to 30$\,$mK using ferromagnetic resonance (FMR) spectroscopy. We show that the dominant physical mechanism for the observed tenfold increase in FMR linewidth at millikelvin temperatures is the non-uniform bias magnetic field generated by the partially magnetized paramagnetic GGG substrate. Numerical simulations and analytical theory show that the GGG-driven linewidth enhancement can reach up to 6.7 times. In addition, at low temperatures and frequencies above 18$\,$GHz, the FMR linewidth deviates from the viscous Gilbert-damping model. These results allow the partial elimination of the damping mechanisms attributed to GGG, which is necessary for the advancement of solid-state quantum technologies.

cond-mat.mes-hall↗

arXiv2024

Generation of gigahertz frequency surface acoustic waves in YIG/ZnO heterostructures

We study surface acoustic waves (SAWs) in yttrium iron garnet (YIG)/zinc oxide (ZnO) heterostructures, comparing the results of a computationally lightweight analytical model with time-resolved micro-focused Brillouin light scattering data. Interdigital transducers (IDTs), with operational frequencies in the gigahertz regime, were fabricated on 50 and 100nm thin films of YIG prior to sputter deposition of 830nm and 890nm films of piezoelectric ZnO. We find good agreement between our analytical model and micro-focused Brillouin light scattering data of the IDT frequency response and SAW group velocity, with clear differentiation between the Rayleigh and Sezawa-like modes. This work paves the way for the study of SAW-spin wave (SW) interactions in low SW damping YIG, with the possibility of a method for future energy-efficient SW excitation.

cond-mat.mes-hall↗

arXiv2024

Magnetic anisotropy and GGG substrate stray field in YIG films down to millikelvin temperatures

Quantum magnonics investigates the quantum-mechanical properties of magnons such as quantum coherence or entanglement for solid-state quantum information technologies at the nanoscale. The most promising material for quantum magnonics is the ferrimagnetic yttrium iron garnet (YIG), which hosts magnons with the longest lifetimes. YIG films of the highest quality are grown on a paramagnetic gadolinium gallium garnet (GGG) substrate. The literature has reported that ferromagnetic resonance (FMR) frequencies of YIG/GGG decrease at temperatures below 50 K despite the increase in YIG magnetization. We investigated a 97 nm-thick YIG film grown on 500 $\mathrm{\mu}$m-thick GGG substrate through a series of experiments conducted at temperatures as low as 30 mK, and using both analytical and numerical methods. Our findings suggest that the primary factor contributing to the FMR frequency shift is the stray magnetic field created by the partially magnetized GGG substrate. This stray field is antiparallel to the applied external field and is highly inhomogeneous, reaching up to 40 mT in the center of the sample. At temperatures below 500 mK, the GGG field exhibits a saturation that cannot be described by the standard Brillouin function for a paramagnet. Including the calculated GGG field in the analysis of the FMR frequency versus temperature dependence allowed the determination of the cubic and uniaxial anisotropies. We find that the total anisotropy increases more than three times with the decrease in temperature down to 2 K. Our findings enable accurate predictions of the YIG/GGG magnetic systems behavior at low and ultra-low millikelvin temperatures, crucial for developing quantum magnonic devices.

cond-mat.mes-hall↗

arXiv2023

Experimental setup for synchronized surface and magnetic loss studies of grain oriented FeSi steel sheets

We present technical details on an experimental setup that allows to measure magnetic losses in electrical steel sheets and the movement of magnetic domains on the sample surface simultaneously. The setup is suitable to investigate grain oriented electrical sheets in the polarization range 0.05 T to 2.3 T and at excitation frequencies between 50 Hz and 4 kHz. The screened surface area is 13 mm x 18 mm.

cond-mat.mtrl-sci↗

arXiv2022

Propagating spin-wave spectroscopy in nanometer-thick YIG films at millikelvin temperatures

Performing propagating spin-wave spectroscopy of thin films at millikelvin temperatures is the next step towards the realisation of large-scale integrated magnonic circuits for quantum applications. Here we demonstrate spin-wave propagation in a $100\,\mathrm{nm}$-thick yttrium-iron-garnet film at the temperatures down to $45 \,\mathrm{mK}$, using stripline nanoantennas deposited on YIG surface for the electrical excitation and detection. The clear transmission characteristics over the distance of $10\,\mu \mathrm{m}$ are measured and the subtracted spin-wave group velocity and the YIG saturation magnetisation agree well with the theoretical values. We show that the gadolinium-gallium-garnet substrate influences the spin-wave propagation characteristics only for the applied magnetic fields beyond $75\,\mathrm{mT}$, originating from a GGG magnetisation up to $47 \,\mathrm{kA/m}$ at $45 \,\mathrm{mK}$. Our results show that the developed fabrication and measurement methodologies enable the realisation of integrated magnonic quantum nanotechnologies at millikelvin temperatures.

physics.app-ph↗

arXiv2022

Thermal spin current generation in the multifunctional ferrimagnet Ga$_{0.6}$Fe$_{1.4}$O$_{3}$

In recent years, multifunctional materials have attracted increasing interest for magnetic memories and energy harvesting applications. Magnetic insulating materials are of special interest for this purpose, since they allow the design of more efficient devices due to the lower Joule heat losses. In this context, Ga$_{0.6}$Fe$_{1.4}$O$_3$ (GFO) is a good candidate for spintronics applications, since it can exhibit multiferroicity and presents a spin Hall magnetoresistance similar to the one observed in a yttrium iron garnet (YIG)/Pt bilayer. Here, we explore GFO utilizing thermo-spin measurements in an on-chip approach. By carefully considering the geometry of our thermo-spin devices we are able to quantify the spin Seebeck effect and the spin current generation in a GFO/Pt bilayer, obtaining a value comparable to that of YIG/Pt. This further confirms the promises of an efficient spin current generation with the possibility of an electric-field manipulation of the magnetic properties of the system in an insulating ferrimagnetic material.

cond-mat.mtrl-sci↗