arXiv subjects

Mourad Oudich

Publications and source records attributed to Mourad Oudich.

16 recordsLinked to original sources

arXiv2026

Reflector-Free, Highly Confined Love-Like SAWs Enabled by a Phononic Metasurface for Real-Time Monitoring of Cell Dynamics

Surface acoustic wave (SAW) devices are widely used in sensing and biosensing but generally suffer from strong attenuation in liquid environments. Conventional approaches rely on reflectors to reduce these losses, yet these components remain difficult to optimize: limited device miniaturization, and increase fabrication complexity. Here, we introduce an innovative design strategy that integrates a phononic metasurface with tailored electromechanical properties of the substrate to generate a type of shear-horizontal (SH) surface resonance modes that exhibit strong lateral confinement and extremely low radiation into both the substrate bulk and the free surface, eliminating the need for reflectors. This approach enables highly tailorable surface acoustic resonances with distinctive enhanced dynamic strain-energy confinement leading to significantly higher quality factors than conventional SAW devices, particularly in water-loaded conditions. We show the fabrication and experimental validation of the proposed phononic metasurface-based SAW resonator and showcase its biosensing capabilities through real-time monitoring of cellular death.

physics.app-ph↗

arXiv2025

Acoustic scattering singularities via quasi-Bound states in the continuum

Non-Hermitian systems enable advanced control of wave propagation by exploiting engineered losses. This introduces an additional degree of freedom that permits the emergence of exceptional points (EPs). In this letter, we theoretically and experimentally demonstrate the control of scattering singularities in a non-Hermitian acoustic system using quasibound states in the continuum (qBICs). Through Friedrich Wintgen interference, the losses of a two port cavity are tuned until achieving critical coupling, yielding narrowband coherent perfect absorption (CPA) with a quality factor of 140. Additionally, by coupling two distinct resonators, we observe the emergence of an EP, where both eigenvalues simultaneously coalesce and vanish, resulting in narrowband unidirectional absorption. Our results establish a connection between qBICs and scattering singularities, and offer a route toward acoustic devices featuring narrowband resonances and tunable radiative losses.

physics.app-ph↗

arXiv2024

Higher-order Skin Effect through a Hermitian-non-Hermitian Correspondence and Its Observation in an Acoustic Kagome Lattice

The non-Hermitian skin effect (NHSE) is a distinctive topological phenomenon observed in nonHermitian systems. Recently, there has been considerable interest in exploring higher-order NHSE occurrences in two and three dimensions. In such systems, topological edge states collapse into a corner while bulk states remain delocalized. Through a Hermitian-non-Hermitian correspondence, this study predicts and experimentally observes the higher-order NHSE in an acoustic Kagome lattice possessing nonreciprocal hoppings. By rotating the frequency spectrum and employing complexfrequency excitation techniques, we observe the localization of acoustic energy towards a corner of the lattice in the topologically nontrivial phase, even when the source is located far from that corner. In contrast, the acoustic energy spreads out when excited at the frequencies hosting the bulk states. These observations are unequivocal evidence of the higher-order NHSE.

cond-mat.mes-hall↗

arXiv2024

Inverse designing metamaterials with programmable nonlinear functional responses in graph space

Material responses to static and dynamic stimuli, represented as nonlinear curves, are design targets for engineering functionalities like structural support, impact protection, and acoustic and photonic bandgaps. Three-dimensional metamaterials offer significant tunability due to their internal structure, yet existing methods struggle to capture their complex behavior-to-structure relationships. We present GraphMetaMat, a graph-based framework capable of designing three-dimensional metamaterials with programmable responses and arbitrary manufacturing constraints. Integrating graph networks, physics biases, reinforcement learning, and tree search, GraphMetaMat can target stress-strain curves spanning four orders of magnitude and complex behaviors, as well as viscoelastic transmission responses with varying attenuation gaps. GraphMetaMat can create cushioning materials for protective equipment and vibration-damping panels for electric vehicles, outperforming commercial materials, and enabling the automatic design of materials with on-demand functionalities.

cond-mat.mtrl-sci↗

arXiv2024

Localized interfacial Phonon Modes at the Electronic Axion Domain Wall

The most salient feature of electronic topological states of matter is the existence of exotic electronic modes localized at the surface or interface of a sample. In this work, in an electronic topological system, we demonstrate the existence of localized phonon modes at the domain wall between topologically trivial and non-trivial regions, in addition to the localized interfacial electronic states. In particular, we consider a theoretical model for the Dirac semimetal with a gap opened by external strains and study the phonon dynamics, which couples to electronic degrees of freedom via strong electron-phonon interaction. By treating the phonon modes as a pseudo-gauge field, we find that the axion type of terms for phonon dynamics can emerge in gapped Dirac semimetal model and lead to interfacial phonon modes localized at the domain wall between trivial and non-trivial regimes that possess the axion parameters 0 and π, respectively. We also discuss the physical properties and possible experimental probe of such interfacial phonon modes.

cond-mat.mes-hall↗

arXiv2024

Hybrid ultrathin metasurface for broadband sound absorption

To this day, achieving broadband low-frequency sound absorption remains a challenge even with the possibilities promised by the advent of metamaterials and metasurfaces, especially when size and structural restrictions exist. Solving this engineering challenge relies on stringent impedance matching and coupling of the multiple independent local resonators in metasurface absorbers. In this letter, we present an innovative design approach to broaden the sound absorption bandwidth at low-frequency regime. A hybrid metasurface design is proposed where four coupled planar coiled resonators are also coupled to a well designed thin planar cavity. This hybrid metasurface creates a broad sound absorption band (130-200 Hz) that is twice as wide as that of the traditional single layer metasurface utilizing four coiled cavities at a deep sub-wavelength thickness (< λ/51). This design strategy open routes towards engineering a class of high performance thin metasurfaces for ultra-broadband sound absorption while keeping the planar size unchanged.

physics.app-ph↗

arXiv2023

Engineering Moiré Meta-crystals with Conventional Photonic and Phononic Structures

Recent discoveries on Mott insulating and unconventional superconducting states in twisted bilayer graphene with Moiré superlattices have reshaped the landscape of ''twistronics'' and paved the way for developing high-temperature superconductors and new devices for quantum computing and sensing. Meanwhile, artificially structured photonic and phononic metamaterials/crystals (or meta-crystals) have become a fertile playground for emulating quantum-mechanical features of condensed matter systems, revealing new routes for robust control of classical waves. Drawing inspiration from the success of twisted bilayer graphene, this perspective casts an overarching framework of the emerging Moiré photonic and phononic meta-crystals that promise novel classical-wave devices. We begin with the fundamentals of Moiré superlattices, before highlighting recent works that exploit twist angle and interlayer coupling as new ingredients to engineer and tailor the band structures and effective material properties of photonic and phononic meta-crystals. We finally discuss future directions and promises of this emerging area in materials science and wave physics.

physics.app-ph↗

arXiv2023

Realization of a Z classified chiral-symmetric higher-order topological insulator in a coupling-inversion acoustic crystal

Higher-order topological band theory has transformed the landscape of topological phases in quantum and classical systems. Here, we experimentally demonstrate a two-dimensional (2D) higher-order topological phase (HOTP), referred to as the multiple chiral topological phase (MCTP), which is protected by a multipole chiral number (MCN). Our realization differs from previous HOTPs in that it possesses a larger-than-unity MCN, which arises when the nearest-neighbor couplings (NNCs) are weaker than long-range couplings (LRCs). Our phase has an MCN of 4, protecting the existence of 4 mid-gap topological corner modes (TCMs) at each corner. The multiple TCMs demonstrated here could lead to enhanced quantum-inspired devices for sensing and computing. Our study also highlights the rich and untapped potential of LRC manipulation for future research in topological phases.

cond-mat.mes-hall↗

arXiv2023

Tailoring Structure-borne Sound Through Bandgap Engineering in Phononic Crystals and Metamaterials: A Comprehensive Review

In solid state physics, a bandgap (BG) refers to a range of energies where no electronic states can exist. This concept was extended to classical waves, spawning the entire fields of photonic and phononic crystals where BGs are frequency (or wavelength) intervals where wave propagation is prohibited. For elastic waves, BGs are found in periodically alternating mechanical properties (i.e., stiffness and density). This gives birth to phononic crystals and later elastic metamaterials that have enabled unprecedented functionalities for a wide range of applications. Planar metamaterials are built for vibration shielding, while a myriad of works focus on integrating phononic crystals in microsystems for filtering, waveguiding, and dynamical strain energy confinement in optomechanical systems. Furthermore, the past decade has witnessed the rise of topological insulators, which leads to the creation of elastodynamic analogs of topological insulators for robust manipulation of mechanical waves. Meanwhile, additive manufacturing has enabled the realization of 3D architected elastic metamaterials, which extends their functionalities. This review aims to comprehensively delineate the rich physical background and the state-of-the art in elastic metamaterials and phononic crystals that possess engineered BGs for different functionalities and applications, and to provide a roadmap for future directions of these manmade materials.

physics.app-ph↗

arXiv2021

Observation of degenerate zero-energy topological states at disclinations in an acoustic lattice

Building upon the bulk-boundary correspondence in topological phases of matter, disclinations have recently been harnessed to trap fractionally quantized density of states (DoS) in classical wave systems. While these fractional DoS have associated states localized to the disclination's core, such states are not protected from deconfinement due to the breaking of chiral symmetry, generally leading to resonances which, even in principle, have finite lifetimes and suboptimal confinement. Here, we devise and experimentally validate in acoustic lattices a paradigm by which topological states bind to disclinations without a fractional DoS but which preserve chiral symmetry. The preservation of chiral symmetry pins the states at the mid-gap, resulting in their protected maximal confinement. The integer DoS at the defect results in two-fold degenerate states that, due to symmetry constraints, do not gap out. Our study provides a fresh perspective on the interplay between symmetry-protection in topological phases and topological defects, with possible applications in classical and quantum systems alike.

cond-mat.mes-hall↗

arXiv2021

Bilayer Photonic Graphene

Drawing inspiration from bilayer graphene, this paper introduces its photonic analog comprising two stacked graphene-like photonic crystals, that are coupled in the near-field through spoof surface plasmons. Beyond the twist degree of freedom that can radically alter the band structure of the bilayer photonic graphene, the photonic dispersion can be also tailored via the interlayer coupling which exhibits an exponential dependence on the distance between the two photonic crystals. We theoretically, numerically, and experimentally characterize the band structures of AA- and AB-stacked bilayer photonic graphene, as well as for twisted bilayer photonic graphene with even and odd sublattice exchange symmetries. Furthermore, we numerically predict the existence of magic angles in bilayer photonic graphene, which are associated with ultra-flat bands resulted from interlayer hybridization. Finally, we demonstrate that the bilayer photonic graphene at a particular twist angle satisfying even sublattice exchange symmetry is a high-order photonic topological insulator. The proposed bilayer photonic graphene could constitute a useful platform for identifying new quantum materials and inspiring next-generation photonic devices with new degrees of freedom and emerging functionality.

physics.app-ph↗

arXiv2020

Magic-angle Bilayer Phononic Graphene

Thanks to the recent discovery on the magic-angle bilayer graphene, twistronics is quickly becom11 ing a burgeoning field in condensed matter physics. This letter expands the realm of twistronics to acoustics by introducing twisted bilayer phononic graphene, which remarkably also harbors the magic angle, evidenced by the associated ultra-flat bands. Beyond mimicking quantum mechanical behaviors of twisted bilayer graphene, we show that their acoustic counterpart offers a considerably more straightforward and robust way to alter the interlayer hopping strength, enabling us to unlock magic angles (> 3 degrees) inaccessible in classical twisted bilayer graphene. This study, not only establishes the acoustical analog of twisted (magic-angle) bilayer graphene, providing a testbed more easily accessible to probe the interaction and misalignment between stacked 2D materials, but also points out the direction to a new phononic crystal design paradigm that could benefit applications such as enhanced acoustic emission and sensing.

cond-mat.mes-hall↗

arXiv2019

Omnidirectional elastic wave attenuation via an isotoxal-star-based auxetic micro-lattice

This paper introduces a micro-lattice based metamaterial for low frequency wide-band vibration attenuation, that is enabled by engineering the metamaterial's building blocks to induce local resonance bandgaps for elastic waves in all directions of propagation. The transmission rate through the proposed structure is examined and strong wave attenuation is demonstrated for a remarkably small number of unit cells. Additionally, it is shown that the bandgaps are tailorable via the geometrical parameters and can be leveraged to design a hybrid metamaterial with an extremely wide bandgap. Alongside being thin, lightweight, and capable of attenuating elastic waves in all directions, the proposed material also possesses the second order functionality of exhibiting a negative Poisson's ratio and can pave the way for identifying exotic functional materials.

physics.app-ph↗

arXiv2019

Space-Time Phononic Crystals with Anomalous Topological Edge States

It is well known that an interface created by two topologically distinct structures could host nontrivial edge states that are immune to defects. In this letter, we introduce a one-dimensional space-time phononic crystal and study the associated anomalous topological edge states. A space-decoupled time modulation is assumed. While preserving the key topological feature of the system, such a modulation also duplicates the edge state mode across the spectrum, both inside and outside the band gap. It is shown that, in contrast to conventional topological edge states which are excited by frequencies in the Bragg regime, the time-modulation-induced frequency conversion can be leveraged to access topological edge states at a deep subwavelength scale where the entire phononic crystal size is merely 1/5.1 of the wavelength. This remarkable feature could open a new route for designing miniature devices that are based on topological physics.

physics.class-ph↗

arXiv2019

Study of tantalum and iridium as adhesion layers for Pt/LGS high temperature SAW devices

In this paper, we report on the use of tantalum and iridium as adhesion layers for platinum electrodes used in high temperature SAW devices based on langasite substrates (LGS). Unlike iridium, tantalum exhibits a great adhesive strength, and a very low mobility through the Pt film, ensuring a device lifetime of at least half an hour at 1000{\textdegree}C. The latter is limited by morphological modifications of platinum, starting by the apparition of crystallites on the surface, and followed by important terracing and breaking of the film continuity. SNMS and XRD measurements allowed us to show that these phenomena are likely intrinsic to platinum film, whatever be the nature of the adhesion layer. Finally, after having outlined a possible scenario leading to this deterioration, we consider some solutions that could replace platinum in order to increase the lifetime of LGS-based SAW devices in high temperatures conditions.

physics.app-ph↗

arXiv2019

Bending sound around sharp corners without using topological edge states

Routing and guiding acoustic waves around sharp corners without backscattering losses is of great interest in the acoustics community. Sonic crystals have been primarily utilized to design backscattering-immune waveguides. While conventional approaches use defects to guide waves, a considerably more sophisticated and robust approach was recently developed based on topological edge states. In this paper, we propose a radically different theoretical framework based on extremely anisotropic metamaterials for engineering backscattering-immune waveguides. We theoretically derived the exact condition for one-way wave propagation in zigzag paths, and identified a number of key advantages of the current design over topologically protected waveguides. While the theoretical underpinning is universal and is applicable to acoustic and electromagnetic waves, the experimental validation was conducted using spoof surface acoustic waves. The proposed metamaterial could open up new possibilities for wave manipulation and lead to applications in on-chip devices and noise control.

physics.app-ph↗