Searcharxiv⌕ Search

arXiv subjects

Muhammad Usman

Publications and source records attributed to Muhammad Usman.

At least 235 records · Page 13Linked to original sources

Tuning of polarisation sensitivity in closely-stacked trilayer InAs/GaAs quantum dots induced by overgrowth dynamics

Tailoring electronic and optical properties of self-assembled InAs quantum dots (QDs) is a critical limit for the design of several QD-based optoelectronic devices operating in the telecom frequency range. We describe how a fine control of the strain-induced surface kinetics during the growth of vertically-stacked multiple layers of QDs allow to engineer their self organization process. Most noticeably, the present study shows that the underlying strain field induced along a QD stack can be modulated and controlled by time-dependent intermixing and segregation effects occurring after capping with GaAs spacer. This leads to a drastic increase of TM/TE polarization ratio of emitted light, not accessible from the conventional growth parameters. Our detailed experimental measurements supported by comprehensive multi-million atom simulations of strain, electronic, and optical properties, provide in-depth analysis of the grown QD samples leading us to depict a clear picture on atomic scale phenomena affecting the proposed growth dynamics and consequent QD polarization response.

cond-mat.mes-hall↗

Derivation of 12- and 14-band $\textbf{k}\cdot\textbf{p}$ Hamiltonians for dilute bismide and bismide-nitride semiconductors

Using an $sp^{3}s^{*}$ tight-binding model we demonstrate how the observed strong bowing of the band gap and spin-orbit-splitting with increasing Bi composition in the dilute bismide alloy GaBi$_{x}$As$_{1-x}$ can be described in terms of a band-anticrossing interaction between the extended states of the GaAs valence band edge and highly localised Bi-related resonant states lying below the GaAs valence band edge. We derive a 12-band $\textbf{k}\cdot\textbf{p}$ Hamiltonian to describe the band structure of GaBi$_{x}$As$_{1-x}$ and show that this model is in excellent agreement with full tight-binding calculations of the band structure in the vicinity of the band edges, as well as with experimental measurements of the band gap and spin-orbit-splitting across a large composition range. Based on a tight-binding model of GaBi$_{x}$N$_{y}$As$_{1-x-y}$ we show that to a good approximation N and Bi act independently of one another in disordered GaBi$_{x}$N$_{y}$As$_{1-x-y}$ alloys, indicating that a simple description of the band structure is possible. We present a 14-band $\textbf{k}\cdot\textbf{p}$ Hamiltonian for ordered GaBi$_{x}$N$_{y}$As$_{1-x-y}$ crystals which reproduces accurately the essential features of full tight-binding calculations of the band structure in the vicinity of the band edges. The $\textbf{k}\cdot\textbf{p}$ models we present here are therefore ideally suited to the simulation of the optoelectronic properties of these novel III-V semiconductor alloys.

cond-mat.mtrl-sci↗

12-band $\textbf{k}\cdot\textbf{p}$ model for dilute bismide alloys of (In)GaAs derived from supercell calculations

Incorporation of bismuth (Bi) in dilute quantities in (In)GaAs has been shown to lead to unique electronic properties that can in principle be exploited for the design of high efficiency telecomm lasers. This motivates the development of simple models of the electronic structure of these dilute bismide alloys, which can be used to evaluate their potential as a candidate material system for optical applications. Here, we begin by using detailed calculations based on an $sp^{3}s^{*}$ tight-binding model of (In)GaBi$_{x}$As$_{1-x}$ to verify the presence of a valence band-anticrossing interaction in these alloys. Based on the tight-binding model the derivation of a 12-band $\textbf{k}\cdot\textbf{p}$ Hamiltonian for dilute bismide alloys is outlined. We show that the band structure obtained from the 12-band model is in excellent agreement with full tight-binding supercell calculations. Finally, we apply the 12-band model to In$_{0.53}$Ga$_{0.47}$Bi$_{x}$As$_{1-x}$ and compare the calculated variation of the band gap and spin-orbit-splitting to a variety of spectroscopic measurements performed on a series of MBE-grown In$_{0.53}$Ga$_{0.47}$Bi$_{x}$As$_{1-x}$/InP layers.

cond-mat.mtrl-sci↗

Understanding Polarization Properties of InAs Quantum Dots by Atomistic Modeling of Growth Dynamics

A model for realistic InAs quantum dot composition profile is proposed and analyzed, consisting of a double region scheme with an In-rich internal core and an In-poor external shell, in order to mimic the atomic scale phenomena such as In-Ga intermixing and In segregation during the growth and overgrowth with GaAs. The parameters of the proposed model are derived by reproducing the experimentally measured polarization data. Further understanding is developed by analyzing the strain fields which suggests that the two-composition model indeed results in lower strain energies than the commonly applied uniform composition model.

cond-mat.mes-hall↗

Impact of alloy disorder on the band structure of compressively strained GaBiAs

The incorporation of bismuth (Bi) in GaAs results in a large reduction of the band gap energy (E$_g$) accompanied with a large increase in the spin-orbit splitting energy ($\bigtriangleup_{SO}$), leading to the condition that $\bigtriangleup_{SO} > E_g$ which is anticipated to reduce so-called CHSH Auger recombination losses whereby the energy and momentum of a recombining electron-hole pair is given to a second hole which is excited into the spin-orbit band. We theoretically investigate the electronic structure of experimentally grown GaBi$_x$As$_{1-x}$ samples on (100) GaAs substrates by directly comparing our data with room temperature photo-modulated reflectance (PR) measurements. Our atomistic theoretical calculations, in agreement with the PR measurements, confirm that E$_g$ is equal to $\bigtriangleup_{SO}$ for $\textit{x} \approx$ 9$%$. We then theoretically probe the inhomogeneous broadening of the interband transition energies as a function of the alloy disorder. The broadening associated with spin-split-off transitions arises from conventional alloy effects, while the behaviour of the heavy-hole transitions can be well described using a valence band-anticrossing model. We show that for the samples containing 8.5% and 10.4% Bi the difficulty in identifying a clear light-hole-related transition energy from the measured PR data is due to the significant broadening of the host matrix light-hole states as a result of the presence of a large number of Bi resonant states in the same energy range and disorder in the alloy. We further provide quantitative estimates of the impact of supercell size and the assumed random distribution of Bi atoms on the interband transition energies in GaBi$_{x}$As$_{1-x}$. Our calculations support a type-I band alignment at the GaBi$_x$As$_{1-x}$/GaAs interface, consistent with recent experimental findings.

cond-mat.mtrl-sci↗

On some sharp spectral inequalities for Schrödinger operators on semi-axis

In this paper we obtain sharp Lieb-Thirring inequalities for a Schrödinger operator on semi-axis with a matrix potential and show how they can be used to other related problems. Among them are spectral inequalities on star graphs and spectral inequalities for Schrödinger operators on half-spaces with Robin boundary conditions.

math-ph↗

Atomistic theoretical study of electronic and polarization properties of elliptical, single and vertically stacked InAs quantum dots

The demonstration of isotropic polarization response from semiconductor quantum dots (QDs) is a crucial step towards the design of several optoelectronic technologies. Among many parameters that impact the degree of polarization (DOP) of a QD system, the shape asymmetry is a critical factor. We perform multi-million-atom simulations to study the impact of the elliptical shapes on the electronic and polarization properties of single and vertically stacked InAs QDs. The comparison between a low aspect ratio (AR) and a high AR QD reveals that the electronic and the polarization properties strongly depend on the AR of the QD; the elongation of a tall QD allows tuning of the DOP over a much wider range. We then extend our analysis to an experimentally reported vertical stack of nine QDs (9-VSQDs) that has shown significant potential to achieve isotropic polarization properties. We analyse the contribution from the shape asymmetry in the large, experimentally measured, in-plane polarization anisotropy. Our analysis shows that the orientation of the base elongation controls the sign of the DOP; however the magnitude of the base elongation has only a very little impact on the magnitude of the DOP. We further predict that the elliptical shape of the 9-VSQDs can only tune either DOP[110] or DOP[-110] for an isotropic response. Our model results, in agreement with the TEM findings, suggest that the experimentally grown 9-VSQDs has either a circular-base or a slightly [-110] elongated base. Overall the detailed investigation of the DOP as a function of the QD shape asymmetry provides a theoretical guidance for the continuing experimental efforts to achieve tailored polarization properties from the QD nano-structures for the design of optical devices.

cond-mat.mes-hall↗

Band engineering in dilute nitride and bismide semiconductor lasers

Highly mismatched semiconductor alloys such as GaNAs and GaBiAs have several novel electronic properties, including a rapid reduction in energy gap with increasing x and also, for GaBiAs, a strong increase in spin orbit- splitting energy with increasing Bi composition. We review here the electronic structure of such alloys and their consequences for ideal lasers. We then describe the substantial progress made in the demonstration of actual GaInNAs telecomm lasers. These have characteristics comparable to conventional InP-based devices. This includes a strong Auger contribution to the threshold current. We show, however, that the large spin-orbit-splitting energy in GaBiAs and GaBiNAs could lead to the suppression of the dominant Auger recombination loss mechanism, finally opening the route to efficient temperature-stable telecomm and longer wavelength lasers with significantly reduced power consumption.

cond-mat.mtrl-sci↗

Theory of the electronic structure of dilute bismide and bismide-nitride alloys of GaAs: Tight-binding and k.p models

The addition of dilute concentrations of bismuth (Bi) into GaAs to form GaBiAs alloys results in a large reduction of the band gap energy Eg accompanied by a significant increase of the spin-orbit-splitting energy (delta_SO), leading to an Eg < delta_SO regime for ~10% Bi composition which is technologically relevant for the design of highly efficient photonic devices. The quaternary alloy GaBiNAs offers further flexibility for band gap tuning, because both nitrogen and bismuth can independently induce band gap reduction. This work reports sp3s* tight binding and 14-band k.p models for the study of the electronic structure of GaBiAs and GaBiNAs alloys. Our results are in good agreement with the available experimental data.

cond-mat.mtrl-sci↗

Polarization Response in InAs Quantum Dots: Theoretical Correlation between Composition and Electronic Properties

III-V growth and surface conditions strongly influence the physical structure and resulting optical properties of self-assembled quantum dots (QDs). Beyond the design of a desired active optical wavelength, the polarization response of QDs is of particular interest for optical communications and quantum information science. Previous theoretical studies based on a pure InAs QD model failed to reproduce experimentally observed polarization properties. In this work, multi-million atom simulations are performed to understand the correlation between chemical composition and polarization properties of QDs. A systematic analysis of QD structural parameters leads us to propose a two layer composition model, mimicking In segregation and In-Ga intermixing effects. This model, consistent with mostly accepted compositional findings, allows to accurately fit the experimental PL spectra. The detailed study of QD morphology parameters presented here serves as a tool for using growth dynamics to engineer the strain field inside and around the QD structures, allowing tuning of the polarization response.

physics.comp-ph↗

Tight-binding analysis of the electronic structure of dilute bismide alloys of GaP and GaAs

We develop an atomistic, nearest-neighbor sp3s* tight-binding Hamiltonian to investigate the electronic structure of dilute bismide alloys of GaP and GaAs. Using this model we calculate that the incorporation of dilute concentrations of Bi in GaP introduces Bi-related defect states in the band gap, which interact with the host matrix valence band edge via a Bi composition dependent band anti-crossing (BAC) interaction. By extending this analysis to GaBiAs we demonstrate that the observed strong variation of the band gap Eg and spin-orbit-splitting (SO) energy with Bi composition can be well explained in terms of a BAC interaction between the extended states of the GaAs valence band edge and highly localized Bi-related defect states lying in the valence band, with the change in Eg also having a significant contribution from a conventional alloy reduction in the conduction band edge energy. Our calculated values of Eg and SO are in good agreement with experiment throughout the investigated composition range x less than 13%. In particular, our calculations reproduce the experimentally observed crossover to an Eg < SO regime at approximately 10.5% Bi composition in bulk GaBiAs. Recent x-ray spectroscopy measurements have indicated the presence of Bi pairs and clusters even for Bi compositions as low as 2%. We include a systematic study of different Bi nearest-neighbor environments in the alloy to achieve a quantitative understanding of the effect of Bi pairing and clustering on the GaBiAs electronic structure.

cond-mat.mtrl-sci↗

Trace formulas for Schrödinger operators on the half-line

We study the scattering problem for the Schrödinger equation on the half-line with Robin boundary condition at the origin. We derive an expression for the trace of the difference of the perturbed and unperturbed resolvent in terms of a Wronskian. This leads to a representation for the perturbation determinant and to trace identities of Buslaev-Faddeev type.

math.SP↗

Quantitative Excited State Spectroscopy of a Single InGaAs Quantum Dot Molecule through Multi-million Atom Electronic Structure Calculations

Atomistic electronic structure calculations are performed to study the coherent inter-dot couplings of the electronic states in a single InGaAs quantum dot molecule. The experimentally observed excitonic spectrum [12] is quantitatively reproduced, and the correct energy states are identified based on a previously validated atomistic tight binding model. The extended devices are represented explicitly in space with 15 million atom structures. An excited state spectroscopy technique is presented in which the externally applied electric field is swept to probe the ladder of the electronic energy levels (electron or hole) of one quantum dot through anti-crossings with the energy levels of the other quantum dot in a two quantum dot molecule. This technique can be applied to estimate the spatial electron-hole spacing inside the quantum dot molecule as well as to reverse engineer quantum dot geometry parameters such as the quantum dot separation. Crystal deformation induced piezoelectric effects have been discussed in the literature as minor perturbations lifting degeneracies of the electron excited (P and D) states, thus affecting polarization alignment of wave function lobes for III-V Heterostructures such as single InAs/GaAs quantum dots. In contrast this work demonstrates the crucial importance of piezoelectricity to resolve the symmetries and energies of the excited states through matching the experimentally measured spectrum in an InGaAs quantum dot molecule under the influence of an electric field. Both linear and quadratic piezoelectric effects are studied for the first time for a quantum dot molecule and demonstrated to be indeed important. The net piezoelectric contribution is found to be critical in determining the correct energy spectrum, which is in contrast to recent studies reporting vanishing net piezoelectric contributions.

cond-mat.mes-hall↗

Experimental and Atomistic Theoretical Study of Degree of Polarization from Multi-layer InAs/GaAs Quantum Dots

Recent experimental measurements, without any theoretical guidance, showed that isotropic polarization response can be achieved by increasing the number of QD layers in a QD stack. Here we analyse the polarization response of multi-layer quantum dot stacks containing up to nine quantum dot layers by linearly polarized PL measurements and by carrying out a systematic set of multi-million atom simulations. The atomistic modeling and simulations allow us to include correct symmetry properties in the calculations of the optical spectra: a factor critical to explain the experimental evidence. The values of the degree of polarization (DOP) calculated from our model follows the trends of the experimental data. We also present detailed physical insight by examining strain profiles, band edges diagrams and wave function plots. Multi-directional PL measurements and calculations of the DOP reveal a unique property of InAs quantum dot stacks that the TE response is anisotropic in the plane of the stacks. Therefore a single value of the DOP is not sufficient to fully characterize the polarization response. We explain this anisotropy of the TE-modes by orientation of hole wave functions along the [-110] direction. Our results provide a new insight that isotropic polarization response measured in the experimental PL spectra is due to two factors: (i) TM[001]-mode contributions increase due to enhanced intermixing of HH and LH bands, and (ii) TE[110]-mode contributions reduce significantly due to hole wave function alignment along the [-110] direction. We also present optical spectra for various geometry configurations of quantum dot stacks to provide a guide to experimentalists for the design of multi-layer QD stacks for optical devices. Our results predict that the QD stacks with identical layers will exhibit lower values of the DOP than the stacks with non-identical layers.

cond-mat.mtrl-sci↗

Comparative Study on DFD to UML Diagrams Transformations

Most of legacy systems use nowadays were modeled and documented using structured approach. Expansion of these systems in terms of functionality and maintainability requires shift towards object-oriented documentation and design, which has been widely accepted by the industry. In this paper, we present a survey of the existing Data Flow Diagram (DFD) to Unified Modeling language (UML) transformation techniques. We analyze transformation techniques using a set of parameters, identified in the survey. Based on identified parameters, we present an analysis matrix, which describes the strengths and weaknesses of transformation techniques. It is observed that most of the transformation approaches are rule based, which are incomplete and defined at abstract level that does not cover in depth transformation and automation issues. Transformation approaches are data centric, which focuses on data-store for class diagram generation. Very few of the transformation techniques have been applied on case study as a proof of concept, which are not comprehensive and majority of them are partially automated.

cs.SE↗

Experimental and Theoretical Study of Polarization-dependent Optical Transitions from InAs Quantum Dots at Telecommunication-Wavelengths (1.3-1.5μm)

The design of some optical devices such as semiconductor optical amplifiers for telecommunication applications requires polarization-insensitive optical emission at the long wavelengths (1300-1550 nm). Self-assembled InAs/GaAs quantum dots (QDs) typically exhibit ground state optical emission at wavelengths shorter than 1300 nm with highly polarization-sensitive characteristics, although this can be modified by using low growth rates, the incorporation of strain-reducing capping layers or growth of closely-stacked QD layers. Exploiting the strain interactions between closely stacked QD layers also allows greater freedom in the choice of growth conditions for the upper layers, so that both a significant extension in their emission wavelength and an improved polarization response can be achieved due to modification of the QD size, strain and composition. In this paper we investigate the polarization behavior of single and stacked QD layers using room temperature sub-lasing-threshold electroluminescence and photovoltage measurements as well as atomistic modeling with the NEMO 3-D simulator. A reduction is observed in the ratio of the transverse electric (TE) to transverse magnetic (TM) optical mode response for a GaAs-capped QD stack compared to a single QD layer, but when the second layer of the two-layer stack is InGaAs-capped an increase in the TE/TM ratio is observed, in contrast to recent reports for single QD layers.

cond-mat.mtrl-sci↗

Global Well-posedness and Asymptotic Behavior of a Class of Initial-Boundary-Value Problem of the Korteweg-de Vries Equation on a Finite Domain

In this paper, we study a class of initial boundary value problem (IBVP) of the Korteweg- de Vries equation posed on a finite interval with nonhomogeneous boundary conditions. The IBVP is known to be locally well-posed, but its global $L^2 $ a priori estimate is not available and therefore it is not clear whether its solutions exist globally or blow up in finite time. It is shown in this paper that the solutions exist globally as long as their initial value and the associated boundary data are small, and moreover, those solutions decay exponentially if their boundary data decay exponentially

math.AP↗