arXiv subjects

Murat Uysal

Publications and source records attributed to Murat Uysal.

At least 19 recordsLinked to original sources

arXiv2026

A Comparative study on THz Communication Systems: Photonics versus Electronics Approaches

Terahertz (THz) communication has emerged as a key enabler for sixth-generation (6G) networks, offering ultrawide bandwidths to support data-intensive applications such as holographic telepresence and immersive extended reality. Recent advances have enabled both electronics-based and photonics-based THz front-ends, each with distinct advantages and hardware limitations. While electronics-based solutions leverage mature semiconductor platforms, they suffer from amplified oscillator phase noise, frequency offsets, and nonlinearities introduced by multiplier and amplifier chains. Photonics-based systems, in turn, enable highly tunable and spectrally pure carriers but are subject to laser intensity noise, amplified spontaneous emission, shot noise in photomixers, and thermal noise in RF mixers. This article provides a comprehensive review of experimental demonstrations in electronics-, photonics-, and hybrid-based THz links, highlighting their hardware architectures, performance metrics, and implementation trade-offs. We then survey theoretical modeling efforts, emphasizing how hardware impairments affect system reliability and identifying limitations in existing studies. Building on this, we develop comprehensive signal models for both approaches, derive analytical expressions for signal-to-noise ratio (SNR), and evaluate bit error rate (BER) performance under realistic system parameters. Comparative results demonstrate how distinct impairment mechanisms shape the overall link performance of electronics- versus photonics-based THz systems. The insights offered aim to guide the design of robust transceiver architectures and accelerate the integration of THz technologies into future 6G deployments.

eess.SP↗

arXiv2026

A Novel Piecewise Atmospheric Attenuation Model for Free Space Optical Links in Vertical Heterogeneous Networks

Free-space optical (FSO) communication is emerging as a key backhaul technology for next-generation vertical heterogeneous networks (VHetNets), whose architecture spans satellites, high-altitude platform stations (HAPS), unmanned aerial vehicles (UAVs), and terrestrial nodes. Along these vertical and slant paths, optical beams traverse successive atmospheric layers that may contain clouds, fog, rain, and aerosols, conditions that conventional single-coefficient Beer-Lambert models typically handle only in isolation. Instead of such simplified formulas, we present a unified attenuation model that incorporates aerosols, fog, rain, cloud layers, and drizzle, accounts for the zenith angle, and provides a holistic estimate of the cumulative power loss across atmospheric layers. Numerical results show several-decibel attenuation variations across representative weather scenarios, while the difference between the proposed model predictions and the layer-resolved MODTRAN simulations remains within 1 dB, thereby validating the accuracy of the proposed model and its practical relevance for VHetNet link-budget studies.

eess.SP↗

arXiv2026

FR3 for 6G Networks: A Comparative Study against FR1 and FR2 Across Diverse Environments

Motivated by increasing wireless capacity demands and 6G advancements, the newly defined Frequency Range 3 (FR3, 7.125-24.25 GHz), also known as the upper mid-band, has emerged as a promising spectrum candidate. It offers a balance between the large bandwidth potential of millimeter-wave bands and the favorable propagation characteristics of sub-6 GHz bands. As a result, the upper mid-band presents a strong opportunity to enhance both coverage and capacity, particularly for 6G systems and Cellular Vehicle-to-Base Station (C-V2B) communications. Harnessing this potential, however, requires addressing key technical challenges through accurate and realistic channel modeling across diverse urban environments, including Suburban, Urban, and HighRise Urban scenarios. To this end, we employ a ray-tracing tool to characterize downlink propagation and enable detailed channel modeling for reliable C-V2B links. We evaluate data rate performance across FR1 (sub-6 GHz), FR3, and FR2 (mmWave) bands using antenna array configurations designed for different urban environments. The results show that, under equal aperture sizes, FR3 achieves higher data rates than FR2 for cell-edge User Equipment (UEs) in both interference-free and full-interference scenarios, indicating that the additional array gain at mmWave is insufficient to fully compensate for the severe experienced path loss. Integrating one-hand-grip pedestrian UEs model into ray tracer shows that transitioning from vehicular to pedestrian UEs results in negligible differences in coverage probability (about 1\%--3\%) across all frequencies, with the minimum differences observed in FR3, particularly at 8.2 GHz.

cs.ET↗

arXiv2026

Characterization of FR3 Cellular Vehicle-to-Base Station Links in HighRise Urban Scenarios

Driven by the escalating demand for wireless capacity and advancements in 6G research, the new Frequency Range 3 (FR3) referred to upper mid-band (7.125-24.25 GHz) has emerged as a highly compelling spectrum candidate. This range offers a trade-off exploiting the high bandwidth capabilities of millimeter wave frequencies and the superior propagation characteristics of sub-6 GHz bands. As such, the upper mid-band presents an opportunity to enhance both coverage and capacity particularly in the context of 6G and Cellular Vehicle-to-Base Station (C-V2B). Crucially, realizing this potential requires overcoming technical challenges through accurate and realistic channel modeling, especially in dense, high-rise urban environments. To address this, we employ a ray-tracing tool to analyze downlink propagation characteristics, enabling detailed channel modeling for reliable C-V2B communication. Our analysis evaluates the signal-to-noise ratio (SNR) and signal-to-interference-plus-noise ratio (SINR) across sub-6 GHz, FR3, and mmWave bands using antenna array configurations designed for high-rise urban areas. Results show that, under equal aperture sizes across frequencies, FR3 achieves superior SNR compared to mmWave in interference-free conditions. Moreover, under the full-interference case, FR3 yields higher SINR for cell-edge User Equipment (UEs). This indicates that the increased array gain at mmWave cannot fully compensate for the severe path loss experienced by cell-edge UEs.

cs.IT↗

arXiv2025

A Refined Alternating Optimization for Sum Rate Maximization in SIM-Aided Multiuser MISO Systems

Stacked intelligent metasurfaces (SIMs) have emerged as a disruptive technology for future wireless networks. To investigate their capabilities, we study the sum rate maximization problem in an SIM-based multiuser (MU) multiple-input single-output (MISO) downlink system. A vast majority of pioneer studies, if not all, address this fundamental problem using the prevailing alternating optimization (AO) framework, where the digital beamforming (DB) and SIM phase shifts are optimized alternately. However, many of these approaches suffer from suboptimal performance, quickly leading to performance saturation, when the number of SIM layers increases assuming the \emph{fixed SIM thickness}. In this letter, we demonstrate that significant performance gains can still be achieved, and such saturation does not occur with the proposed method in the considered setting. To this end, we provide practical design guidelines to improve AO-based optimization of digital precoders and SIM phase shifts. Specifically, we show that (i) optimizing the SIM phase shifts first yields significant performance improvements, compared to optimizing the DB first; and (ii) when applying projected gradient (PG) methods, which are gradually becoming more popular to optimize the phase shifts thanks to their scalability, we find that using an iterative PG method achieves better performance than the single PG step, which is commonly used in existing solutions. Based on these customizations, the proposed method achieves a higher achievable sum rate (ASR) of up to $\ensuremath{115.53\%}$, compared to benchmark schemes for the scenarios under consideration.

eess.SP↗

arXiv2025

Capacity-Optimized Pre-Equalizer Design for Visible Light Communication Systems

Since commercial LEDs are primarily designed for illumination rather than data transmission, their modulation bandwidth is inherently limited to a few MHz. This becomes a major bottleneck in the implementation of visible light communication (VLC) systems necessiating the design of pre-equalizers. While state-of-the-art equalizer designs primarily focus on the data rate increasing through bandwidth expansion, they often overlook the accompanying degradation in signal-to-noise ratio (SNR). Achieving effective bandwidth extension without introducing excessive SNR penalties remains a significant challenge, since the channel capacity is a non-linear function of both parameters. In this paper, we present a fundamental analysis of how the parameters of the LED and pre-equalization circuits influence the channel capacity in intensity modulation and direct detection (IMDD)-based VLC systems. We derive a closed-form expression for channel capacity model that is an explicitly function of analog pre-equalizer circuit parameters. Building upon the derived capacity expression, we propose a systematic design methodology for analog pre-equalizers that effectively balances bandwidth and SNR, thereby maximizing the overall channel capacity across a wide range of channel attenuations. We present extensive numerical results to validate the effectiveness of the proposed design and demonstrate the improvements over conventional bandwidth-optimized pre-equalizer designs.

cs.IT↗

arXiv2025

Placement, Orientation, and Resource Allocation Optimization for Cell-Free OIRS-aided OWC Network

The emergence of optical intelligent reflecting surface (OIRS) technologies marks a milestone in optical wireless communication (OWC) systems, enabling enhanced control over light propagation in indoor environments. This capability allows for the customization of channel conditions to achieve specific performance goals. This paper presents an enhancement in downlink cell-free OWC networks through the integration of OIRS. The key focus is on fine-tuning crucial parameters, including transmit power, receiver orientations, OIRS elements allocation, and strategic placement. In particular, a multi-objective optimization problem (MOOP) aimed at simultaneously improving the network's spectral efficiency (SE) and energy efficiency (EE) while adhering to the network's quality of service (QoS) constraints is formulated. The problem is solved by employing the $ε$-constraint method to convert the MOOP into a single-objective optimization problem and solving it through successive convex approximation. Simulation results show the significant impact of OIRS on SE and EE, confirming its effectiveness in improving OWC network performance.

eess.SP↗

arXiv2022

Multi-Hop Quantum Key Distribution with Passive Relays over Underwater Turbulence Channels

Absorption, scattering, and turbulence experienced in underwater channels severely limit the range of quantum communications. In this paper, to overcome range limitations, we investigate a multi-hop underwater quantum key distribution (QKD) where intermediate nodes help the key distribution between the source and destination nodes. We consider deployment of passive-relays which simply redirect the qubits to the next relay node or receiver without any measurement. Based on near-field analysis, we present the performance of relay-assisted QKD scheme in clear ocean under different atmospheric conditions. We further investigate the effect of system parameters (aperture size and detector field-of-view) on the achievable distance.

quant-ph↗

arXiv2022

On the Optimization of Underwater Quantum Key Distribution Systems with Time-Gated SPADs

In this paper, we study the effect of various transmitter and receiver parameters on the quantum bit error rate (QBER) performance of underwater quantum key distribution. We utilize a Monte Carlo approach to simulate the trajectories of emitted photons transmitting in the water from the transmitter towards receiver. Based on propagation delay results, we first determine a proper value for bit period to avoid the intersymbol interference as a result of possible multiple scattering events. Then, based on the angle of arrival of the received photons, we determine a proper field-of-view to limit the average number of received background noise. Finally, we determine the optimal value for the single photon avalanche diode (SPAD) gate time in the sense of minimizing the QBER for the selected system parameters and given propagation environment.

quant-ph↗

arXiv2022

Modulating Retroreflector Based Free Space Optical Link for UAV-to-Ground Communications

Weight reduction and low power consumption are key requirements in the next generation of unmanned aerial vehicle (UAV) networks. Employing modulating retro-reflector (MRR)-based free space optical (FSO) technology is an innovative technique for UAV-to-ground communication in order to reduce the payload weight and power consumption of UAVs which leads to increased maneuverability and flight time of UAV. In this paper, we consider an MRR-based FSO system for UAV-to-ground communication. We will show that the performance of the considered system is very sensitive to tracking errors. Therefore, to assess the benefits of MRR-based UAV deployment for FSO communications, the MRR-based UAV FSO channel is characterized by taking into account tracking system errors along with UAV's orientation fluctuations, link length, UAV's height, optical beam divergence angle, effective area of MRR, atmospheric turbulence and optical channel loss in the double-pass channels. To enable effective performance analysis, tractable and closed-form expressions are derived for probability density function of end-to-end signal to noise ratio, outage probability and bit error rate of the considered system under both weak-to-moderate and moderate-to-strong atmospheric turbulence conditions. The accuracy of the analytical expressions is verified by extensive simulations. Analytical results are then used to study the relationship between the optimal system design and tracking system errors.

eess.SP↗

arXiv2021

Hybrid RF/VLC Systems: A Comprehensive Survey on Network Topologies, Performance Analyses, Applications, and Future Directions

Wireless communications refer to data transmissions in unguided propagation media through the use of wireless carriers such as radio frequency (RF) and visible light (VL) waves. The rising demand for high data rates, especially, in indoor scenarios, overloads conventional RF technologies. Therefore, technologies such as millimeter waves (mmWave) and cognitive radios have been adopted as possible solutions to overcome the spectrum scarcity and capacity limitations of the conventional RF systems. In parallel, visible light communication (VLC) has been proposed as an alternative solution, where a light source is used for both illumination and data transmission. In comparison to RF links, VLC links present a very high bandwidth that allows much higher data rates. VLC exhibits also immunity to interference from electromagnetic sources, has unlicensed channels, is a very low power consumption system, and has no health hazard. VLC is appealing for a wide range of applications including reliable communications with low latency such as vehicle safety communication. Despite the major advantages of VLC technology and a variety of its applications, its use has been hampered by its cons such as its dependence on a line of sight connectivity. Recently, hybrid RF/VLC systems were proposed to take advantage of the high capacity of VLC links and better connectivity of RF links. Thus, hybrid RF/VLC systems are envisioned as a key enabler to improve the user rates and mobility on one hand and to optimize the capacity, interference and power consumption of the overall network on the other hand. This paper seeks to provide a detailed survey of hybrid RF/VLC systems. This paper represents an overview of the current developments in the hybrid RF/VLC systems, their benefits and limitations for both newcomers and expert researchers.

eess.SP↗

arXiv2021

Measurement Based Non-Line-Of-Sight Vehicular Visible Light Communication Channel Characterization

Vehicular visible light communication (V-VLC) aims to provide secure complementary vehicle to everything communications (V2X) to increase road safety and traffic efficiency. V-VLC provides directional transmissions, mainly enabling line-of-sight (LoS) communications. However, reflections due to nearby objects enable non-line-of-sight (NLoS) transmissions, extending the usage scenarios beyond LoS. In this paper, we propose a wide-band measurement-based NLoS channel characterization and evaluate the performance of direct current biased optical orthogonal frequency division multiplexing (DCO-OFDM) V-VLC scheme for NLoS channel. We propose a distance-based NLoS V-VLC channel path loss model considering reflection surface characteristics and NLoS V-VLC channel impulse response (CIR) incorporating the temporal broadening effect due to vehicle reflections through weighted double gamma function. The proposed path loss model yields higher accuracy up to 14 dB when compared to the single order reflection model whereas the CIR model estimates the full width at half maximum up to 2 ns accuracy. We further demonstrate that the target bit-error-rate of 10^-3 can be achieved up to 7.86 m, 9.79 m, and 17.62 m distances for black, orange, and white vehicle reflection induced measured NLoS V-VLC channels for DCO-OFDM transmissions.

eess.SP↗

arXiv2021

Space-Time Block Coded Spatial Modulation for Indoor Visible Light Communications

Visible light communication (VLC) has been recognized as a promising technology for handling the continuously increasing quality of service and connectivity requirements in modern wireless communications, particularly in indoor scenarios. In this context, the present work considers the integration of two distinct modulation schemes, namely spatial modulation (SM) with space time block codes (STBCs), aiming at improving the overall VLC system reliability. Based on this and in order to further enhance the achievable transmission data rate, we integrate quasi-orthogonal STBC (QOSTBC) with SM, since relaxing the orthogonality condition of OSTBC ultimately provides a higher coding rate. Then, we generalize the developed results to any number of active light-emitting diodes (LEDs) and any M-ary pulse amplitude modulation size. Furthermore, we derive a tight and tractable upper bound for the corresponding bit error rate (BER) by considering a simple two-step decoding procedure to detect the indices of the transmitting LEDs and then decode the signal domain symbols. Notably, the obtained results demonstrate that QOSTBC with SM enhances the achievable BER compared to SM with repetition coding (RC-SM). Finally, we compare STBC-SM with both multiple active SM (MASM) and RC-SM in terms of the achievable BER and overall data rate, which further justifies the usefulness of the proposed scheme.

cs.IT↗

arXiv2018

Multi-User Visible Light Communications: State-of-the-Art and Future Directions

Visible light communication (VLC) builds upon the dual use of existing lighting infrastructure for wireless data transmission. VLC has recently gained interest as cost-effective, secure, and energy-efficient wireless access technology particularly for indoor user-dense environments. While initial studies in this area are mainly limited to single-user point-to-point links, more recent efforts have focused on multi-user VLC systems in an effort to transform VLC into a scalable and fully networked wireless technology. In this paper, we provide a comprehensive overview of multi-user VLC systems discussing the recent advances on multi-user precoding, multiple access, resource allocation, and mobility management. We further provide possible directions of future research in this emerging topic.

eess.SP↗

arXiv2018

ViLDAR - Visible Light Sensing Based Speed Estimation using Vehicle's Headlamps

The introduction of light emitting diodes (LED) in automotive exterior lighting systems provides opportunities to develop viable alternatives to conventional communication and sensing technologies. Most of the advanced driver-assist and autonomous vehicle technologies are based on Radio Detection and Ranging (RADAR) or Light Detection and Ranging (LiDAR) systems that use radio frequency or laser signals, respectively. While reliable and real-time information on vehicle speeds is critical for traffic operations management and autonomous vehicles safety, RADAR or LiDAR systems have some deficiencies especially in curved road scenarios where the incidence angle is rapidly varying. In this paper, we propose a novel speed estimation system so-called the Visible Light Detection and Ranging (ViLDAR) that builds upon sensing visible light variation of the vehicle's headlamp. We determine the accuracy of the proposed speed estimator in straight and curved road scenarios. We further present how the algorithm design parameters and the channel noise level affect the speed estimation accuracy. For wide incidence angles, the simulation results show that the ViLDAR outperforms RADAR/LiDAR systems in both straight and curved road scenarios. A provisional patent (US#62/541,913) has been obtained for this work.

eess.SP↗

arXiv2017

Statistical Modeling of Propagation Channels for Terahertz Band

Digital revolution and recent advances in telecommunications technology enable to design communication systems which operate within the regions close to the theoretical capacity limits. Ever-increasing demand for wireless communications and emerging numerous high-capacity services, data rates and applications mandate providers to employ more bandwidth-oriented solutions to meet the requirements. It is clear that such rates could only be achieved by employing more bandwidth with the state-of-the- art technology. Considering the fact that bands in the range of 275GHz-3000GHz, which are known as Terahertz (THz) bands, are not allocated yet for specific active services around the globe, there is an enormous potential to achieve the desired data rates. Although THz bands look promising to achieve data rates on the order of several tens of Gbps, realization of fully operational THz communications systems obliges to carry out a multi- disciplinary effort including statistical propagation and channel characterizations, adaptive transceiver designs, reconfigurable platforms, advanced signal processing algorithms and techniques along with upper layer protocols equipped with various security and privacy levels. Therefore, in this study, several important statistical parameters for line-of-sight (LOS) channels are measured. High resolution frequency domain measurements are carried out at single-sweep within a span of 60GHz. Impact of antenna misalignment under LOS conditions is also investigated. By validating exponential decay of the received power in both time and frequency domain, path loss exponent is examined for different frequencies along with the frequency-dependent path loss phenomenon. Furthermore, impact of humidity is also tested under LOS scenario. Measurement results are presented along with relevant discussions and future directions are provided as well.

cs.IT↗

arXiv2015

Next Generation M2M Cellular Networks: Challenges and Practical Considerations

In this article, we present the major challenges of future machine-to-machine (M2M) cellular networks such as spectrum scarcity problem, support for low-power, low-cost, and numerous number of devices. As being an integral part of the future Internet-of-Things (IoT), the true vision of M2M communications cannot be reached with conventional solutions that are typically cost inefficient. Cognitive radio concept has emerged to significantly tackle the spectrum under-utilization or scarcity problem. Heterogeneous network model is another alternative to relax the number of covered users. To this extent, we present a complete fundamental understanding and engineering knowledge of cognitive radios, heterogeneous network model, and power and cost challenges in the context of future M2M cellular networks.

cs.NI↗

arXiv2015

Resource Allocation for Mixed RF and Hybrid RF/FSO Relaying

In this paper, we consider a mixed RF and hybrid RF/FSO system where several mobile users transmit their data over an RF link to a relay node (e.g. a small cell base station) and the relay forwards the information to a destination (e.g. a macro cell base station) over a hybrid RF/FSO backhaul link. The relay and the destination employ multiple antennas for transmission and reception over the RF links while each mobile user has a single antenna. The RF links are full-duplex with respect to the FSO link and half-duplex with respect to each other, i.e., either the user-relay RF link or the relay-destination RF link is active. For this communication setup, we derive the optimal resource allocation policy for sharing the RF bandwidth resource between the RF links. Our numerical results show the effectiveness of the proposed communication architecture and resource allocation policy, and their superiority compared to existing schemes which employ only one type of backhaul link.

cs.IT↗