arXiv subjects

N. Brouillet

Publications and source records attributed to N. Brouillet.

At least 37 records · Page 2Linked to original sources

arXiv2022

Gaia Data Release 3: Analysis of the Gaia BP/RP spectra using the General Stellar Parameterizer from Photometry

We present the General Stellar Parameterizer from Photometry (GSP-Phot), which is part of the astrophysical parameters inference system (Apsis). GSP-Phot is designed to produce a homogeneous catalogue of parameters for hundreds of millions of single non-variable stars based on their astrometry, photometry, and low-resolution BP/RP spectra. These parameters are effective temperature, surface gravity, metallicity, absolute $M_G$ magnitude, radius, distance, and extinction for each star. GSP-Phot uses a Bayesian forward-modelling approach to simultaneously fit the BP/RP spectrum, parallax, and apparent $G$ magnitude. A major design feature of GSP-Phot is the use of the apparent flux levels of BP/RP spectra to derive, in combination with isochrone models, tight observational constraints on radii and distances. We carefully validate the uncertainty estimates by exploiting repeat Gaia observations of the same source. The data release includes GSP-Phot results for 471 million sources with $G<19$. Typical differences to literature values are 110 K for $T_{\rm eff}$ and 0.2-0.25 for $\log g$, but these depend strongly on data quality. In particular, GSP-Phot results are significantly better for stars with good parallax measurements ($\varpi/σ_varpi>20$), mostly within 2kpc. Metallicity estimates exhibit substantial biases compared to literature values and are only useful at a qualitative level. However, we provide an empirical calibration of our metallicity estimates that largely removes these biases. Extinctions $A_0$ and $A_{\rm BP}$ show typical differences from reference values of 0.07-0.09 mag. MCMC samples of the parameters are also available for 95% of the sources. GSP-Phot provides a homogeneous catalogue of stellar parameters, distances, and extinctions that can be used for various purposes, such as sample selections (OB stars, red giants, solar analogues etc.).

astro-ph.SR↗

arXiv2022

Gaia Data Release 3: Astrophysical parameters inference system (Apsis) I -- methods and content overview

Gaia Data Release 3 contains a wealth of new data products for the community. Astrophysical parameters are a major component of this release. They were produced by the Astrophysical parameters inference system (Apsis) within the Gaia Data Processing and Analysis Consortium. The aim of this paper is to describe the overall content of the astrophysical parameters in Gaia Data Release 3 and how they were produced. In Apsis we use the mean BP/RP and mean RVS spectra along with astrometry and photometry, and we derive the following parameters: source classification and probabilities for 1.6 billion objects, interstellar medium characterisation and distances for up to 470 million sources, including a 2D total Galactic extinction map, 6 million redshifts of quasar candidates and 1.4 million redshifts of galaxy candidates, along with an analysis of 50 million outlier sources through an unsupervised classification. The astrophysical parameters also include many stellar spectroscopic and evolutionary parameters for up to 470 million sources. These comprise Teff, logg, and m_h (470 million using BP/RP, 6 million using RVS), radius (470 million), mass (140 million), age (120 million), chemical abundances (up to 5 million), diffuse interstellar band analysis (0.5 million), activity indices (2 million), H-alpha equivalent widths (200 million), and further classification of spectral types (220 million) and emission-line stars (50 thousand). This catalogue is the most extensive homogeneous database of astrophysical parameters to date, and it is based uniquely on Gaia data.

astro-ph.GA↗

arXiv2022

Gaia Data Release 3: Apsis II -- Stellar Parameters

The third Gaia data release contains, beyond the astrometry and photometry, dispersed light for hundreds of millions of sources from the Gaia prism spectra (BP and RP) and the spectrograph (RVS). This data release opens a new window on the chemo-dynamical properties of stars in our Galaxy, essential knowledge for understanding the structure, formation, and evolution of the Milky Way. To provide insight into the physical properties of Milky Way stars, we used these data to produce a uniformly-derived, all-sky catalog of stellar astrophysical parameters (APs): Teff, logg, [M/H], [$α$/Fe], activity index, emission lines, rotation, 13 chemical abundance estimates, radius, age, mass, bolometric luminosity, distance, and dust extinction. We developed the Apsis pipeline to infer APs of Gaia objects by analyzing their astrometry, photometry, BP/RP, and RVS spectra. We validate our results against other literature works, including benchmark stars, interferometry, and asteroseismology. Here we assessed the stellar analysis performance from Apsis statistically. We describe the quantities we obtained, including our results' underlying assumptions and limitations. We provide guidance and identify regimes in which our parameters should and should not be used. Despite some limitations, this is the most extensive catalog of uniformly-inferred stellar parameters to date. These comprise Teff, logg, and [M/H] (470 million using BP/RP, 6 million using RVS), radius (470 million), mass (140 million), age (120 million), chemical abundances (5 million), diffuse interstellar band analysis (1/2 million), activity indices (2 million), H{$α$} equivalent widths (200 million), and further classification of spectral types (220 million) and emission-line stars (50 thousand). More precise and detailed astrophysical parameters based on epoch BP, RP, and RVS are planned for the next Gaia data release.

astro-ph.SR↗

arXiv2022

Gaia Data Release 3 Properties and validation of the radial velocities

Gaia Data Release 3 (Gaia DR3) contains the second release of the combined radial velocities. It is based on the spectra collected during the first 34 months of the nominal mission. The longer time baseline and the improvements of the pipeline made it possible to push the processing limit, from Grvs = 12 in Gaia DR2, to Grvs = 14 mag. In this article, we describe the new functionalities implemented for Gaia DR3, the quality filters applied during processing and post-processing and the properties and performance of the published velocities. For Gaia DR3, several functionalities were upgraded or added. (Abridged) Gaia DR3 contains the combined radial velocities of 33 812 183 stars. With respect to Gaia DR2, the interval of temperature has been expanded from Teff \in [3600, 6750] K to Teff \in [3100, 14500] K for the bright stars ( Grvs \leq 12 mag) and [3100, 6750] K for the fainter stars. The radial velocities sample a significant part of the Milky Way: they reach a few kilo-parsecs beyond the Galactic centre in the disc and up to about 10-15 kpc vertically into the inner halo. The median formal precision of the velocities is of 1.3 km/s at Grvs = 12 and 6.4 km/s at Grvs = 14 mag. The velocity zero point exhibits a small systematic trend with magnitude starting around Grvs = 11 mag and reaching about 400 m/s at Grvs = 14 mag. A correction formula is provided, which can be applied to the published data. The Gaia DR3 velocity scale is in satisfactory agreement with APOGEE, GALAH, GES and RAVE, with systematic differences that mostly do not exceed a few hundreds m/s. The properties of the radial velocities are also illustrated with specific objects: open clusters, globular clusters as well as the Large Magellanic Cloud (LMC). For example, the precision of the data allows to map the line-of-sight rotational velocities of the globular cluster 47 Tuc and of the LMC.

astro-ph.GA↗

arXiv2022

Gaia Data Release 3: G_RVS photometry from the RVS spectra

Gaia Data Release 3 (DR3) contains the first release of magnitudes estimated from the integration of Radial Velocity Spectrometer (RVS) spectra for a sample of about 32.2 million stars brighter than G_RVS~14 mag (or G~15 mag). In this paper, we describe the data used and the approach adopted to derive and validate the G_RVS magnitudes published in DR3. We also provide estimates of the G_RVS passband and associated G_RVS zero-point. We derived G_RVS photometry from the integration of RVS spectra over the wavelength range from 846 to 870 nm. We processed these spectra following a procedure similar to that used for DR2, but incorporating several improvements that allow a better estimation of G_RVS. These improvements pertain to the stray-light background estimation, the line spread function calibration, and the detection of spectra contaminated by nearby relatively bright sources. We calibrated the G_RVS zero-point every 30 hours based on the reference magnitudes of constant stars from the Hipparcos catalogue, and used them to transform the integrated flux of the cleaned and calibrated spectra into epoch magnitudes. The G_RVS magnitude of a star published in DR3 is the median of the epoch magnitudes for that star. We estimated the G_RVS passband by comparing the RVS spectra of 108 bright stars with their flux-calibrated spectra from external spectrophotometric libraries. The G_RVS magnitude provides information that is complementary to that obtained from the G, G_BP, and G_RP magnitudes, which is useful for constraining stellar metallicity and interstellar extinction. The median precision of G_RVS measurements ranges from about 0.006 mag for the brighter stars (i.e. with 3.5 < G_RVS < 6.5 mag) to 0.125 mag at the faint end. The derived G_RVS passband shows that the effective transmittance of the RVS is approximately 1.23 times better than the pre-launch estimate.

astro-ph.GA↗

arXiv2022

Gaia Data Release 3. Stellar chromospheric activity and mass accretion from Ca II IRT observed by the Radial Velocity Spectrometer

The Gaia Radial Velocity Spectrometer provides the unique opportunity of a spectroscopic analysis of millions of stars at medium-resolution in the near-infrared. This wavelength range includes the Ca II infrared triplet (IRT), which is a good diagnostics of magnetic activity in the chromosphere of late-type stars. Here we present the method devised for inferring the Gaia stellar activity index together with its scientific validation. A sample of well studied PMS stars is considered to identify the regime in which the Gaia stellar activity index may be affected by mass accretion. The position of these stars in the colour-magnitude diagram and the correlation with the amplitude of the photometric rotational modulation is also scrutinised. Three regimes of the chromospheric stellar activity are identified, confirming suggestions made by previous authors on much smaller $R'_{\rm HK}$ datasets. The highest stellar activity regime is associated with PMS stars and RS CVn systems, in which activity is enhanced by tidal interaction. Some evidence of a bimodal distribution in MS stars with $T_{\rm eff}\ge$ 5000 K is also found, which defines the two other regimes, without a clear gap in between. Stars with 3500 K$\le T_{\rm eff} \le$ 5000 K are found to be either very active PMS stars or active MS stars with a unimodal distribution in chromospheric activity. A dramatic change in the activity distribution is found for $T_{\rm eff}\le$3500 K, with a dominance of low activity stars close to the transition between partially- and fully-convective stars and a rise in activity down into the fully-convective regime.

astro-ph.SR↗

arXiv2022

Gaia Data Release 3: Hot-star radial velocities

The second Gaia data release, DR2, contained radial velocities of stars with effective temperatures up to Teff = 6900 K. The third data release, Gaia DR3, extends this up to Teff = 14,500 K. We derive the radial velocities for hot stars (i.e. in the Teff = 6900 - 14,500 K range) from data obtained with the Radial Velocity Spectrometer (RVS) on board Gaia. The radial velocities were determined by the standard technique of measuring the Doppler shift of a template spectrum that was compared to the observed spectrum. The RVS wavelength range is very limited. The proximity to and systematic blueward offset of the calcium infrared triplet to the hydrogen Paschen lines in hot stars can result in a systematic offset in radial velocity. For the hot stars, we developed a specific code to improve the selection of the template spectrum, thereby avoiding this systematic offset. With the improved code, and with the correction we propose to the DR3 archive radial velocities, we obtain values that agree with reference values to within 3 km/s (in median). Because of the required S/N for applying the improved code, the hot star radial velocities in DR3 are mostly limited to stars with a magnitude in the RVS wavelength band <= 12 mag.

astro-ph.SR↗

arXiv2022

Gaia Data Release 3: Analysis of RVS spectra using the General Stellar Parametriser from spectroscopy

The chemo-physical parametrisation of stellar spectra is essential for understanding the nature and evolution of stars and of Galactic stellar populations. Gaia DR3 contains the parametrisation of RVS data performed by the General Stellar Parametriser-spectroscopy, module. Here we describe the parametrisation of the first 34 months of RVS observations. GSP-spec estimates the chemo-physical parameters from combined RVS spectra of single stars. The main analysis workflow described here, MatisseGauguin, is based on projection and optimisation methods and provides the stellar atmospheric parameters; the individual chemical abundances of N, Mg, Si, S, Ca, Ti, Cr, FeI, FeII, Ni, Zr, Ce and Nd; the differential equivalent width of a cyanogen line; and the parameters of a DIB feature. Another workflow, based on an artificial neural network, provides a second set of atmospheric parameters that are useful for classification control. We implement a detailed quality flag chain considering different error sources. With about 5.6 million stars, the Gaia DR3 GSP-spec all-sky catalogue is the largest compilation of stellar chemo-physical parameters ever published and the first one from space data. Internal and external biases have been studied taking into account the implemented flags. In some cases, simple calibrations with low degree polynomials are suggested. The homogeneity and quality of the estimated parameters enables chemo-dynamical studies of Galactic stellar populations, interstellar extinction studies from individual spectra, and clear constraints on stellar evolution models. We highly recommend that users adopt the provided quality flags for scientific exploitation . The Gaia DR3 GSP-spec catalogue is a major step in the scientific exploration of Milky Way stellar populations, confirming the Gaia promise of a new Galactic vision (abridged).

astro-ph.GA↗

arXiv2022

ALMA-IMF III -- Investigating the origin of stellar masses: Top-heavy core mass function in the W43-MM2&MM3 mini-starburst

The ALMA-IMF Large Program observed the W43-MM2-MM3 ridge, whose 1.3mm and 3mm ALMA 12m array continuum images reach a 2500au spatial resolution. We used both the best-sensitivity and the line-free ALMA-IMF images, reduced the noise with the multi-resolution segmentation technique MnGSeg, and derived the most complete and most robust core catalog possible. Using two different extraction software packages, getsf and GExt2D, we identified 200 compact sources, whose 100 common sources have on average fluxes consistent to within 30%. We filtered sources with non-negligible free-free contamination and corrected fluxes from line contamination, resulting in a W43-MM2-MM3 catalog of 205 getsf cores. With a median deconvolved FWHM size of 3400au, core masses range from 0.1Msun to 70Msun and the getsf catalog is 90% complete down to 0.8Msun. The high-mass end of the core mass function (CMF) of W43-MM2-MM3 is top-heavy compared to the canonical IMF. Fitting the cumulative CMF with a single power law of the form N(>logM)\propto M^a, we measured a=-0.95\pm0.04, compared to the canonical a=-1.35 Salpeter IMF slope. The slope of the CMF is robust with respect to map processing, extraction software package, and reasonable variations in the assumptions taken to estimate core masses. We explore several assumptions on how cores transfer their mass to stars and sub-fragment to predict the IMF resulting from the W43-MM2-MM3 CMF. In stark contrast to the commonly accepted paradigm, our result argues against the universality of the CMF shape. More robust functions of the star-formation efficiency and core sub-fragmentation are required to better predict the resulting IMF, here suggested to remain top-heavy at the end of the star-formation phase. If confirmed, the IMFs emerging from starburst events could inherit their top-heavy shape from their parental CMFs, challenging the IMF universality.

astro-ph.GA↗

arXiv2021

ALMA-IMF I -- Investigating the origin of stellar masses: Introduction to the Large Program and first results

The ALMA-IMF Large Program imaged a total noncontiguous area of 53pc2, covering 15 extreme, nearby protoclusters of the Milky Way. They were selected to span relevant early protocluster evolutionary stages. Our 1.3mm and 3mm observations provide continuum images that are homogeneously sensitive to point-like cores with masses of 0.2 and 0.6Msun, respectively, with a matched spatial resolution of 2000au. We also detect lines that probe the protocluster structure, kinematics, chemistry, and feedback over scales from clouds to filaments to cores. We classify ALMA-IMF protoclusters as Young, Intermediate, or Evolved based on the amount of dense gas in the cloud that has potentially been impacted by HII regions. The ALMA-IMF catalog contains 700 cores that span a mass range of 0.15-250Msun at a typical size of 2100au. We show that this core sample has no significant distance bias and can be used to build core mass functions at similar physical scales. Significant gas motions, which we highlight here in the G353.41 region, are traced down to core scales and can be used to look for inflowing gas streamers and to quantify the impact of the possible associated core mass growth on the shape of the CMF with time. Our first analysis does not reveal any significant evolution of the matter concentration from clouds to cores or from the youngest to more evolved protoclusters, indicating that cloud dynamical evolution and stellar feedback have for the moment only had a slight effect on the structure of high-density gas in our sample. Furthermore, the first-look analysis of the line richness toward bright cores indicates that the survey encompasses several tens of hot cores, of which we highlight the most massive in the G351.77 cloud. Their homogeneous characterization can be used to constrain the emerging molecular complexity in protostars of high to intermediate masses.

astro-ph.GA↗

arXiv2021

Gaia Early Data Release 3: Updated radial velocities from Gaia DR2

Gaia's Early Third Data Release (EDR3) does not contain new radial velocities because these will be published in Gaia's full third data release (DR3), expected in the first half of 2022. To maximise the usefulness of EDR3, Gaia's second data release (DR2) sources (with radial velocities) are matched to EDR3 sources to allow their DR2 radial velocities to also be included in EDR3. This presents two considerations: (i) arXiv:1901.10460 (hereafter B19) published a list of 70,365 sources with potentially contaminated DR2 radial velocities; and (ii) EDR3 is based on a new astrometric solution and a new source list, which means sources in DR2 may not be in EDR3. EDR3 contains 7,209,831 sources with a DR2 radial velocity, which is 99.8% of sources with a radial velocity in DR2. 14,800 radial velocities from DR2 are not propagated to any EDR3 sources because (i) 3871 from the B19 list are found to either not have an unpublished, preliminary DR3 radial velocity or it differs significantly from its DR2 value, and 5 high-velocity stars not in the B19 list are confirmed to have contaminated radial velocities; and (ii) 10,924 DR2 sources could not be satisfactorily matched to any EDR3 sources, so their DR2 radial velocities are also missing from EDR3. The reliability of radial velocities in EDR3 has improved compared to DR2 because the update removes a small fraction of erroneous radial velocities (0.05% of DR2 radial velocities and 5.5% of the B19 list). Lessons learnt from EDR3 (e.g. bright star contamination) will improve the radial velocities in future Gaia data releases. The main reason for radial velocities from DR2 not propagating to EDR3 is not related to DR2 radial velocity quality. It is because the DR2 astrometry is based on one component of close binary pairs, while EDR3 astrometry is based on the other component, which prevents these sources from being unambiguously matched. (Abridged)

astro-ph.GA↗

arXiv2019

Molecular analysis of a high-mass prestellar core candidate in W43-MM1

High-mass analogues of low-mass prestellar cores are searched for to constrain the models of high-mass star formation. Several high-mass cores, at various evolutionary stages, have been recently identified towards the massive star-forming region W43-MM1 and amongst them a high-mass prestellar core candidate. We aim to characterise the chemistry in this high-mass prestellar core candidate, referred to as W43-MM1 core #6, and its environment. Using ALMA high-spatial resolution data of W43-MM1, we have studied the molecular content of core #6 and a neighbouring high-mass protostellar core, referred to as #3, which is similar in size and mass to core #6. We first subtracted the continuum emission using a method based on the density distribution of the intensities on each pixel. Then, from the distribution of detected molecules, we identified the molecules centred on the prestellar core candidate (core #6) and those associated to shocks related to outflows and filament formation. Then we constrained the column densities and temperatures of the molecules detected towards the two cores. While core #3 appears to contain a hot core with a temperature of about 190 K, core #6 seems to have a lower temperature in the range from 20 K to 90 K from a rotational diagram analysis. We have considered different source sizes for core #6 and the comparison of the abundances of the detected molecules towards the core with various interstellar sources shows that it is compatible with a core of size 1000 au with $T = 20-90$ K or a core of size 500 au with $T \sim 80$ K. Core #6 of W43-MM1 remains one of the best high-mass prestellar core candidates even if we cannot exclude that it is at the very beginning of the protostellar phase of high-mass star formation.

astro-ph.GA↗

arXiv2018

Detection of a high-mass prestellar core candidate in W43-MM1

Aims. To constrain the physical processes that lead to the birth of high-mass stars it is mandatory to study the very first stages of their formation. We search for high-mass analogs of low-mass prestellar cores in W43-MM1. Methods. We conducted a 1.3 mm ALMA mosaic of the complete W43-MM1 cloud, which has revealed numerous cores with ~ 2000 au FWHM sizes. We investigated the nature of cores located at the tip of the main filament, where the clustering is minimum. We used the continuum emission to measure the core masses and the $^{13}$CS(5-4) line emission to estimate their turbulence level. We also investigated the prestellar or protostellar nature of these cores by searching for outflow signatures traced by CO(2-1) and SiO(5-4) line emission, and for molecular complexity typical of embedded hot cores. Results. Two high-mass cores of ~ 1300 au diameter and ~ $60~M_\odot$ mass are observed to be turbulent but gravitationally bound. One drives outflows and is associated with a hot core. The other core, W43-MM1\#6, does not yet reveal any star formation activity and thus is an excellent high-mass prestellar core candidate.

astro-ph.GA↗

arXiv2018

Gaia Data Release 2: The catalogue of radial velocity standard stars

Aims. The Radial Velocity Spectrometer (RVS) on board the ESA satellite mission Gaia has no calibration device. Therefore, the radial velocity zero point needs to be calibrated with stars that are proved to be stable at a level of 300 m/s during the Gaia observations. Methods. We compiled a dataset of ~71000 radial velocity measurements from five high-resolution spectrographs. A catalogue of 4813 stars was built by combining these individual measurements. The zero point was established using asteroids. Results. The resulting catalogue has seven observations per star on average on a typical time baseline of six years, with a median standard deviation of 15 m/s. A subset of the most stable stars fulfilling the RVS requirements was used to establish the radial velocity zero point provided in Gaia Data Release 2. The stars that were not used for calibration are used to validate the RVS data.

astro-ph.GA↗

arXiv2018

Characterising Open Clusters in the solar neighbourhood with the Tycho-Gaia Astrometric Solution

The Tycho-Gaia Astrometric Solution (TGAS) subset of the first Gaia catalogue contains an unprecedented sample of proper motions and parallaxes for two million stars brighter than G~12 mag. We take advantage of the full astrometric solution available for those stars to identify the members of known open clusters and compute mean cluster parameters using either TGAS or UCAC4 proper motions, and TGAS parallaxes. We apply an unsupervised membership assignment procedure to select high probability cluster members, we use a Bayesian/MCMC technique to fit stellar isochrones to the observed 2MASS JHK$_s$ magnitudes of the member stars and derive cluster parameters (age, metallicity, extinction, distance modulus), and we combine TGAS data with spectroscopic radial velocities to compute full Galactic orbits. We obtain mean astrometric parameters (proper motions and parallaxes) for 128 clusters closer than about 2 kpc, and cluster parameters from isochrone fitting for 26 of them located inside 1 kpc from the Sun. We show the orbital parameters obtained from integrating 36 orbits in a Galactic potential.

astro-ph.GA↗

arXiv2015

Searching for Trans Ethyl Methyl Ether in Orion KL

We report on the tentative detection of $trans$ Ethyl Methyl Ether (tEME), $t-CH_3CH_2OCH_3$, through the identification of a large number of rotational lines from each one of the spin states of the molecule towards Orion KL. We also search for $gauche$-$trans$-n-propanol, $Gt-n-CH_3CH_2CH_2OH$, an isomer of tEME in the same source. We have identified lines of both species in the IRAM 30m line survey and in the ALMA Science Verification data. We have obtained ALMA maps to establish the spatial distribution of these species. Whereas tEME mainly arises from the compact ridge component of Orion, Gt-n-propanol appears at the emission peak of ethanol (south hot core). The derived column densities of these species at the location of their emission peaks are $\leq(4.0\pm0.8)\times10^{15} cm^{-2}$ and $\leq(1.0\pm0.2)\times10^{15} cm^{-2}$ for tEME and Gt-n-propanol, respectively. The rotational temperature is $\sim100 K$ for both molecules. We also provide maps of $CH_3OCOH$, $CH_3CH_2OCOH$, $CH_3OCH_3$, $CH_3OH$, and $CH_3CH_2OH$ to compare the distribution of these organic saturated O-bearing species containing methyl and ethyl groups in this region. Abundance ratios of related species and upper limits to the abundances of non-detected ethers are provided. We derive an abundance ratio $N(CH_3OCH_3)/N(tEME)\geq150$ in the compact ridge of Orion.

astro-ph.GA↗

arXiv2015

Antifreeze in the hot core of Orion - First detection of ethylene glycol in Orion-KL

Comparison of their chemical compositions shows, to first order, a good agreement between the cometary and interstellar abundances. However, a complex O-bearing organic molecule, ethylene glycol (CH$_{2}$OH)$_{2}$, seems to depart from this correlation because it was not easily detected in the interstellar medium although it proved to be rather abundant with respect to other O-bearing species in comet Hale-Bopp. Ethylene glycol thus appears, together with the related molecules glycolaldehyde CH$_{2}$OHCHO and ethanol CH$_{3}$CH$_{2}$OH, as a key species in the comparison of interstellar and cometary ices as well as in any discussion on the formation of cometary matter. We focus here on the analysis of ethylene glycol in the nearest and best studied hot core-like region, Orion-KL. We use ALMA interferometric data because high spatial resolution observations allow us to reduce the line confusion problem with respect to single-dish observations since different molecules are expected to exhibit different spatial distributions. Furthermore, a large spectral bandwidth is needed because many individual transitions are required to securely detect large organic molecules. Confusion and continuum subtraction are major issues and have been handled with care. We have detected the aGg' conformer of ethylene glycol in Orion-KL. The emission is compact and peaks towards the Hot Core close to the main continuum peak, about 2" to the south-west; this distribution is notably different from other O-bearing species. Assuming optically thin lines and local thermodynamic equilibrium, we derive a rotational temperature of 145 K and a column density of 4.6 10$^{15}$ cm$^{-2}$. The limit on the column density of the gGg' conformer is five times lower.

astro-ph.GA↗

arXiv2013

Acetone in Orion BN/KL - High-resolution maps of a special oxygen-bearing molecule

As one of the prime targets of interstellar chemistry study, Orion BN/KL clearly shows different molecular distributions between large nitrogen- (e.g., C2H5CN) and oxygen-bearing (e.g., HCOOCH3) molecules. However, acetone (CH3)2CO, a special complex O-bearing molecule, has been shown to have a very different distribution from other typical O-bearing molecules in the BN/KL region. We searched for acetone within our IRAM Plateau de Bure Interferometer 3 mm and 1.3 mm data sets. Twenty-two acetone lines were searched within these data sets. The angular resolution ranged from 1.8 X 0.8 to 6.0 X 2.3 arcsec^2, and the spectral resolution ranged from 0.4 to 1.9 km s-1. Nine of the acetone lines appear free of contamination. Three main acetone peaks (Ace-1, 2, and 3) are identified in Orion BN/KL. The new acetone source Ace-3 and the extended emission in the north of the hot core region have been found for the first time. An excitation temperature of about 150 K is determined toward Ace-1 and Ace-2, and the acetone column density is estimated to be 2-4 X 10^16 cm-2 with a relative abundance of 1-6 X 10^-8 toward these two peaks. Acetone is a few times less abundant toward the hot core and Ace-3 compared with Ace-1 and Ace-2. We find that the overall distribution of acetone in BN/KL is similar to that of N-bearing molecules, e.g., NH3 and C2H5CN, and very different from those of large O-bearing molecules, e.g., HCOOCH3 and (CH3)2O. Our findings show the acetone distribution is more extended than in previous studies and does not originate only in those areas where both N-bearing and O-bearing species are present. Moreover, because the N-bearing molecules may be associated with shocked gas in Orion BN/KL, this suggests that the formation and/or destruction of acetone may involve ammonia or large N-bearing molecules in a shocked-gas environment.

astro-ph.GA↗