arXiv subjects

N. Canale

Publications and source records attributed to N. Canale.

At least 19 recordsLinked to original sources

arXiv2026

First Experimental Limit on the Permanent Electric Dipole Moment of the Deuteron

Permanent electric dipole moments (EDMs) provide a sensitive probe of physics beyond the Standard Model and are directly linked to additional sources of CP violation that could explain the matter-antimatter asymmetry of the universe. EDM measurements of charged particles in storage rings rely on detecting a small tilt of the invariant spin axis with respect to the ring plane. In this work, we present the experimental determination of the invariant spin axis of an ensemble of deuterons in the COoler SYnchrotron (COSY), a conventional magnetic storage ring, using a combination of a radio-frequency Wien filter, a superconducting Siberian snake and an electron-cooler solenoid. The measurements reveal tilts of a few milliradians, which are dominated by systematic effects. From the observed tilts, we derive the first experimental limit on the deuteron EDM, $|d^d|< 2.5\cdot10^{-17}\,e\cdot\mathrm{cm} \; (95\%\,\text{ C.L.})$. This result demonstrates the feasibility of using storage rings to search for EDMs of charged stable hadrons and provides a foundation for future dedicated facilities.

nucl-ex↗

arXiv2025

Investigation of Radiation Emitted by Sub GeV Electrons in Oriented Scintillator Crystals

The research investigates coherent interactions between sub-GeV electrons and oriented scintillator crystals, leading to enhanced electromagnetic (EM) radiation. Experiments at Mainz Mikrotron (MAMI) involved PWO, BGO, and CsI crystals oriented along $\langle100\rangle$, $\langle111\rangle$, and $\langle100\rangle$ axes. Enhanced radiation emission was observed when the beam aligned with crystal axes, especially in BGO and CsI for the first time. These findings are crucial for innovative detectors using oriented crystal scintillators, amplifying EM processes along specific crystallographic directions. Potential applications include ultra-compact, highly sensitive electromagnetic calorimeters for high-energy physics and astroparticles, as well as high-performance gamma detectors for nuclear physics and medical imaging.

hep-ex↗

arXiv2025

Beam Steering and Radiation Generation of Electrons in Bent Crystals in the Sub-GeV Domain

We present an investigation into beam steering and radiation emission by sub-GeV electrons traversing bent silicon crystals. Using 855, 600, and 300~MeV electron beams at the Mainz Microtron (MAMI), we explored orientational coherent effects and particle dynamics in a 15~$\mu$m-thick crystal bent along the (111) planes. Combined experimental and simulation analyses enabled the classification and quantitative assessment of the contributions from channeling, dechanneling, rechanneling, and volume capture to both beam deflection and radiation emission. Crystal steering remained effective even at 300~MeV, with measured channeling efficiencies exceeding 50\%, a record at such low energy. Channeling and volume reflection enhanced radiation emission by up to a factor of six compared to the misaligned orientation, highlighting strong orientational coherence effects in the sub-GeV regime. These findings confirm the feasibility of using bent crystals for efficient beam manipulation and high-intensity photon generation at low energies, supporting the development of novel light sources and beam control strategies at accelerator facilities operating in this energy range.

physics.acc-ph↗

arXiv2025

R&D on a high-performance electromagnetic calorimeter based on oriented crystalline scintillators

Although inorganic scintillators are widely used in the design of electromagnetic calorimeters for high-energy physics and astrophysics, their crystalline nature and, hence, their lattice orientation are generally neglected in the detector design. However, in general, the features of the electromagnetic field experienced by the particles impinging on a crystal at a small angle with respect to a lattice axis affect their interaction mechanisms. In particular, in case of electrons/photons of $\mathcal{O} (10~\mathrm{GeV})$ or higher impinging on a high-$Z$ crystal at an angle of $\lesssim 1~\mathrm{mrad}$, the so-called strong field regime is attained: the bremsstrahlung and pair production cross sections are enhanced with respect to the case of amorphous or randomly oriented materials. Overall, the increase of these processes leads to an acceleration of the electromagnetic shower development. These effects are thoroughly investigated by the OREO (ORiEnted calOrimeter) team, and pave the way to the development of innovative calorimeters with a higher energy resolution, a higher efficiency in photon detection and an improved particle identification capabilities due to the relative boost of the electromagnetic interactions with respect to the hadronic ones. Moreover, a detector with the same resolution as the current state of the art and reduced thickness could be developed. An overview of the lattice effects at the foundation of the shower boost and of the current status of the development of an operational calorimeter prototype are presented. This concept could prove pivotal for both accelerator fixed-target experiments and satellite-borne $\gamma$-ray observatories.

physics.ins-det↗

arXiv2025

A highly-compact and ultra-fast homogeneous electromagnetic calorimeter based on oriented lead tungstate crystals

Progress in high-energy physics has been closely tied to the development of highperformance electromagnetic calorimeters. Recent experiments have demonstrated the possibility to significantly accelerate the development of electromagnetic showers inside scintillating crystals typically used in homogeneous calorimeters based on scintillating crystals when the incident beam is aligned with a crystallographic axis to within a few mrad. In particular, a reduction of the radiation length has been measured when ultrarelativistic electron and photon beams were incident on a high-Z scintillator crystal along one of its main axes. Here, we propose the possibility to exploit this physical effect for the design of a new type of compact e.m. calorimeter, based on oriented ultrafast lead tungstate (PWO-UF) crystals, with a significant reduction in the depth needed to contain electromagnetic showers produced by high-energy particles with respect to the state-of-the-art. We report results from tests of the crystallographic quality of PWO-UF samples via high-resolution X-ray diffraction and photoelastic analysis. We then describe a proof-of-concept calorimeter geometry defined with a Geant4 model including the shower development in oriented crystals. Finally, we discuss the experimental techniques needed for the realization of a matrix of scintillator crystals oriented along a specific crystallographic direction. Since the angular acceptance for e.m. shower acceleration depends little on the particle energy, while the decrease of the shower length remains pronounced at very high energy, an oriented crystal calorimeter will open the way for applications at the maximum energies achievable in current and future experiments. Such applications span from forward calorimeters, to compact beam dumps for the search for light dark matter, to source-pointing space-borne {\gamma}-ray telescopes.

physics.ins-det↗

arXiv2025

Experimental Study of Rare Kaon Decays at J-PARC with KOTO and KOTO II

The rare kaon decay $K_L\to\pi^0\nu\bar{\nu}$ is extremely sensitive to new physics, because the contribution to this decay in the Standard Model (SM) is highly suppressed and known very accurately; the branching ratio is $3\times 10^{-11}$ in the SM with a theoretical uncertainty of just 2%. The measurement of this branching ratio could provide essential new information about the flavor structure of the quark sector from the $s\to d$ transition. The decay is being searched for in the KOTO experiment at J-PARC, which has obtained the current best upper limit on the branching ratio of $2.2\times 10^{-9}$; a sensitivity to branching ratios below $10^{-10}$ is achievable by the end of the decade. A next-generation experiment at J-PARC, KOTO II, was proposed in 2024 with 82 members worldwide, including significant contributions from European members. The goal of KOTO II is to measure the $K_L\to\pi^0\nu\bar{\nu}$ branching ratio with sensitivity below $10^{-12}$ in the 2030s. Discovery of the decay with $5\sigma$ significance is achievable at the SM value of the branching ratio. An indication of new physics with a significance of 90% is possible if the observed branching ratio differs by 40% from the SM value. Another important goal of KOTO II is to measure the branching ratio of the unobserved $K_L\to \pi^0e^+e^-$ decay, which can give an input to flavor structures of new physics. Other rare $K_L$ decays and hidden-sector particles are also in the scope of the study. After 2026, KOTO will be the only dedicated rare kaon decay experiment in the world, and KOTO II is the only future rare kaon decay project currently proposed. We would like to lead a global initiative for the experimental study of rare kaon decays, with significant contributions and support from the European community.

hep-ex↗

arXiv2025

A Novel Tool for Advanced Analysis of Geant4 Simulations of Charged Particles Interactions in Oriented Crystals

We present a novel Python tool for the analysis of Geant4 simulations that enhances our understanding of coherent phenomena occurring during the interaction of charged particles with crystal planes. This tool compares the total energy of particles with the potential energy inside crystal channels, enabling a complete examination of coherent effects. By tracking the particle trajectory and classifying the dynamics at each simulation step, it provides deeper insights into how different phenomena contribute to both radiation and particle deflection. This tool can be used to improve crystal-based extraction methods and the development of gamma-ray sources using crystals.

cond-mat.mtrl-sci↗

arXiv2025

Coherent radiation in axially oriented industrial-grade tungsten crystals: A viable path for an innovative {\gamma}-rays and positron sources

It is known that the alignment of an high-energy e- beam with specific crystal directions leads to a significant increase of the coherent radiation emission. This enhancement can be exploited to create an intense photon source. An elective application is an innovative positron source design for future lepton colliders. Such scheme takes advantage of lattice coherent effects by employing a high-Z crystalline radiator, followed by an amorphous metallic converter, to generate positrons via a two-step electromagnetic process. Additional applications can be in neutron production through photo-transmutation and radionuclide generation via photo-nuclear reactions. In this work, we present experimental results obtained from beam tests at CERN's PS facility using commercial industrial-grade tungsten crystals. The obtained results demonstrate the robust performance of industrial-grade radiators, even with their inherent imperfections, suggesting that it is possible to simplify the supply process and it is not strictly necessary to rely on highly specialized research infrastructures.

physics.acc-ph↗

arXiv2025

Maintaining a Resonance Condition of an RF Spin Rotator Through a Feedback Loop in a Storage Ring

This paper presents the successful application of a phase-lock feedback system to maintain the resonance condition of a radio frequency (rf) spin rotator (specifically, an rf Wien filter) with respect to a 120 kHz spin precession in the Cooler Synchrotron (COSY) storage ring. Real-time monitoring of the spin precession and the rf Wien filter signal allows the relative phase between the two to be stabilized at an arbitrary setpoint. The feedback system compensates for deviations in the relative phase by adjusting the frequency and/or phase as needed. With this method, a variation in phase relative to the demand phase with a standard deviation of $\sigma_{\Delta\varphi}\approx 0.2\mathrm{rad}$ could be achieved. The system was implemented in two runs aiming at a first direct measurement of the deuteron electric dipole moment in 2018 and 2021. In addition, the difference between a single-bunch beam affected by the spin rotator and a two-bunch system in which only one bunch is exposed to the spin rotator fields is discussed. Both methods have been used during these beam times. The ability to keep the spin precession and the rf fields synchronized is also crucial for future investigations of electric dipole moments of charged particles using storage rings.

physics.acc-ph↗

arXiv2024

Observation of Fine Structure in Channeling of Particles in Bent Crystals

We observed highly efficient manipulation of the 530 MeV positron beam at Mainz Microtron via bent crystals. The low beam divergence revealed a fine structure in the angular distribution of channeled particles. A compact analytical model, supported by Monte Carlo including multiple scattering, accounts for the measurements. We established a criterion for designing a crystal with reduced angular spread of channeled particles for beam manipulation at any energy. This finding is particularly useful in view of applications of channeling to the highest energies.

physics.acc-ph↗

arXiv2023

Spin decoherence and off-resonance behavior of radiofrequency-driven spin rotations in storage rings

Radiofrequency-driven resonant spin rotators are routinely used as standard instruments in polarization experiments in particle and nuclear physics. Maintaining the continuous exact parametric spin-resonance condition of the equality of the spin rotator and the spin precession frequency during operation constitutes one of the challenges. We present a detailed analytic description of the impact of detuning the exact spin resonance on the vertical and the in-plane precessing components of the polarization. An important part of the formalism presented here is the consideration of experimentally relevant spin-decoherence effects. We discuss applications of the developed formalism to the interpretation of the experimental data on the novel pilot bunch approach to control the spin-resonance condition during the operation of the radiofrequency-driven Wien filter that is used as a spin rotator in the first direct deuteron electric dipole moment measurement at COSY. We emphasize the potential importance of the hitherto unexplored phase of the envelope of the horizontal polarization as an indicator of the stability of the radiofrequency-driven spin rotations in storage rings. The work presented here serves as a satellite publication to the work published concurrently on the proof of principle experiment about the so-called pilot bunch approach that was developed to provide co-magnetometry for the deuteron electric dipole moment experiment at COSY.

physics.acc-ph↗

arXiv2023

Pilot bunch and co-magnetometry of polarized particles stored in a ring

In polarization experiments at storage rings, one of the challenges is to maintain the spin-resonance condition of a radio-frequency spin rotator with the spin-precessions of the orbiting particles. Time-dependent variations of the magnetic fields of ring elements lead to unwanted variations of the spin precession frequency. We report here on a solution to this problem by shielding (or masking) one of the bunches stored in the ring from the high-frequency fields of the spin rotator, so that the masked pilot bunch acts as a co-magnetometer for the other signal bunch, tracking fluctuations in the ring on a time scale of about one second. While the new method was developed primarily for searches of electric dipole moments of charged particles, it may have far-reaching implications for future spin physics facilities, such as the EIC and NICA.

physics.ins-det↗

arXiv2021

Storage Ring to Search for Electric Dipole Moments of Charged Particles -- Feasibility Study

The proposed method exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM) aligned along the particle spin axis. Statistical sensitivities could approach 10$^{-29}$ e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarisation, initially parallel to the particle velocity, for times in excess of 15 minutes. Large radial electric fields, acting through the EDM, will rotate the polarisation from the longitudinal to the vertical direction. The slow rise in the vertical polarisation component, detected through scattering from a target, signals the EDM. The project strategy is outlined. A stepwise plan is foreseen, starting with ongoing COSY activities that demonstrate technical feasibility. Achievements to date include reduced polarization measurement errors, long horizontal plane polarization lifetimes, and control of the polarization direction through feedback from scattering measurements. The project continues with a proof-of-capability measurement (precursor experiment; first direct deuteron EDM measurement), an intermediate prototype ring (proof-of-principle; demonstrator for key technologies), and finally a high-precision electric-field storage ring.

hep-ex↗

arXiv2020

Beam-based alignment at the Cooler Synchrotron COSY as a prerequisite for an electric dipole moment measurement

The Jülich Electric Dipole moment Investigation (JEDI) collaboration aims at a direct measurement of the Electric Dipole Moment (EDM) of protons and deuterons using a storage ring. The measurement is based on a polarization measurement. In order to reach highest accuracy, one has to know the exact trajectory through the magnets, especially the quadrupoles, to avoid the influence of magnetic fields on the polarization vector. In this paper, the development of a beam-based alignment technique is described that was developed and implemented at the COoler SYnchrotron (COSY) at Forschungszentrum Jülich. Well aligned quadrupoles permit one to absolutely calibrate the Beam Position Monitors (BPMs). The method is based on the fact that a particle beam, which does not pass through the center of a quadrupole, experiences a deflection. The precision reached by the method is approximately 40 micro meter. Some consequences for the design of a new high precision storage ring for EDM mesasurements are discussed.

physics.acc-ph↗

arXiv2020

A New Beam Polarimeter at COSY to Search for Electric Dipole Moments of Charged Particles

A calorimetric polarimeter based on inorganic LYSO scintillators is described. It has been designed for use in a storage ring to search for electric dipole moments (EDM) of charged particles such as the proton and deuteron. Its development and first use was on the Cooler Synchrotron (COSY) at the Forschungszentrum Jülich with 0.97 GeV/c polarized deuterons, a particle and energy suitable for an EDM search. The search requires a polarimeter with high efficiency, large analyzing power, and stable operating characteristics. With typical beam momenta of about 1 GeV/c, the scattering of protons or deuterons from a carbon target into forward angles becomes a nearly optimal choice of an analyzing reaction. The polarimeter described here consists of 52 LYSO detector modules, arranged in 4 symmetric blocks (up, down, left, right) for energy determination behind plastic scintillators for particle identification via energy loss. The commissioning results of the current setup demonstrate that the polarimeter is ready to be employed in a first direct search for an EDM on the deuteron, which is planned at COSY in the next two years.

physics.ins-det↗

arXiv2018

A Cylindrical GEM Inner Tracker for the BESIII experiment at IHEP

The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector that collects data provided by the collision in the Beijing Electron Positron Collider II (BEPCII), hosted at the Institute of High Energy Physics of Beijing. Since the beginning of its operation, BESIII has collected the world largest sample of J/ψ and ψ(2s). Due to the increase of the luminosity up to its nominal value of 10^33 cm-2 s-1 and aging effect, the MDC decreases its efficiency in the first layers up to 35% with respect to the value in 2014. Since BESIII has to take data up to 2022 with the chance to continue up to 2027, the Italian collaboration proposed to replace the inner part of the MDC with three independent layers of Cylindrical triple-GEM (CGEM). The CGEM-IT project will deploy several new features and innovation with respect the other current GEM based detector: the μTPC and analog readout, with time and charge measurements will allow to reach the 130 μm spatial resolution in 1 T magnetic field requested by the BESIII collaboration. In this proceeding, an update of the status of the project will be presented, with a particular focus on the results with planar and cylindrical prototypes with test beams data. These results are beyond the state of the art for GEM technology in magnetic field.

physics.ins-det↗

arXiv2018

Innovative design and construction technique for the Cylindrical GEM detector for the BESIII experiment

Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the particles and to exploit the its properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allow to create very large area GEM foils (up to 50x100 cm2) and thanks to the small thickness of these foil is it possible to shape it to the desired form: a Cylindrical Gas Electron Multiplier (CGEM) is then proposed. The innovative construction technique based on Rohacell, a PMI foam, will give solidity to cathode and anode with a very low impact on material budget. The entire detector is sustained by permaglass rings glued at the edges. These rings are use to assembly the CGEM together with a dedicated Vertical Insertion System and moreover there is placed the On-Detector electronic. The anode has been improved w.r.t. the state of the art through a jagged readout that minimize the inter-strip capacitance. The mechanical challenge of this detector requires a precision of the entire geometry within few hundreds of microns in the whole area. In this presentation will be presented an overview of the construction technique and the validation of this technique through the realization of a CGEM and its first tests. These activities are performed within the framework of the BESIIICGEM Project (645664), funded by the European Commission in the action H2020-RISE-MSCA-2014.

physics.ins-det↗

arXiv2018

Performance of the micro-TPC Reconstruction for GEM Detectors at High Rate

Gas detectors are one of the pillars of the research in fundamental physics. Since many years, a new concept of detectors, the Micro Pattern Gas Detectors, allows to overcome many of the problems of other types of commonly used detectors, as drift chambers and microstrips, reducing the discharge rate and increasing the radiation tolerance. Among these, one of the most commonly used is the Gas Electron Multiplier. Commonly deployed as fast timing detectors and triggers, due to their fast response, high rate capability and high radiation hardness, they can also be used as trackers. The center of gravity readout technique allows to overcome the limit of the digital pads, whose spatial resolution is constrained by the pitch size. The presence of a high external magnetic field can distort the electronic cloud and affect the spatial resolution. The micro-TPC reconstruction method allows to reconstruct the three dimensional particle position as in a traditional Time Projection Chamber, but within a drift gap of a few millimeters. This method brings these detectors into a new perspective for what concerns the spatial resolution in strong magnetic field. In this report, the basis of this new technique will be shown and it will be compared to the traditional center of gravity. The results of a series of test beam performed with 10 x 10 cm2 planar prototypes in magnetic field will also be presented. This is one of the first implementations of this technique for GEM detectors in magnetic field and allows to reach unprecedented performance for gas detectors, up to a limit of 120 micron at 1T, one of the world's best results for MPGDs in strong magnetic field. The micro-TPC reconstruction has been recently tested at very high rates in a test beam at the MAMI facility; preliminary results of the test will be presented.

physics.ins-det↗