arXiv subjects

N. Katayama

Publications and source records attributed to N. Katayama.

At least 19 recordsLinked to original sources

arXiv2026

Coupled structural and electronic evolution under pressure in CuIr2Se4, CuRh2S4, and CuRh2Se4

Spinel chalcogenides provide a platform for investigating the interplay among metallic, superconducting, and pressure-induced insulating states. Here, we combine synchrotron powder X-ray diffraction and electrical-resistivity measurements to investigate the pressure evolution of CuIr2Se4, CuRh2S4, and CuRh2Se4 over pressure ranges extending beyond those previously explored. High-pressure diffraction reveals closely related monoclinic supercells in all three compounds. For CuIr2Se4 and CuRh2S4, constrained profile fits based on structural models relaxed using density functional theory are compatible with Phase-IV-type bond-disproportionated structures, whereas the data for CuRh2Se4 establish a compatible monoclinic unit cell without resolving its atomic-scale ordering pattern. Insulating-like transport develops abruptly over a narrow pressure range in CuIr2Se4 but more gradually over broader pressure ranges in the Rh-based compounds, in close correspondence with their respective structural transformations. We also establish previously unreported bulk superconductivity in CuIr2Se4 at ambient pressure: zero resistance is attained at 0.29 K, and the accompanying ac diamagnetic response is consistent with nearly complete superconducting shielding. These results establish a close relationship between the formation of the high-pressure monoclinic phases and the evolution toward insulating transport, and demonstrate that transition-metal and chalcogen substitutions tune the characteristic pressure scales and the competition with superconductivity within a closely related structural framework.

cond-mat.mtrl-sci↗

arXiv2025

Reexamination of the charge-ordered dimer pattern in the spinel compound CuIr2S4 using single-crystal synchrotron x-ray diffraction

We have re-investigated the crystal structure of a spinel type CuIr2S4 at low temperatures using a single-crystal in a synchrotron radiation x-ray diffraction experiment. The crystal structure of the low-temperature phase of CuIr2S4 has been already studied by diffraction experiments using a powder sample, and it has been reported that the formation of dimer molecules accompanied by charge ordering of Ir has been achieved. The crystal structure of the low-temperature phase obtained in our reanalysis was the same as the previously reported structure in that it showed the formation of Ir dimers accompanied by charge ordering, but the charge ordering pattern and arrangement of the dimers in the unit cell were different. We will discuss the validity of the structure obtained in this study and provide the structural parameters revealed in the reanalysis. The results of this study should provide a basis for further studies of the physical properties of CuIr2S4, which are still being actively investigated.

cond-mat.str-el↗

arXiv2024

Calibration of detector time constant with a thermal source for the POLARBEAR-2A CMB polarization experiment

The Simons Array (SA) project is a ground-based Cosmic Microwave Background (CMB) polarization experiment. The SA observes the sky using three telescopes, and POLARBEAR-2A (PB-2A) is the receiver system on the first telescope. For the ground-based experiment, atmospheric fluctuation is the primary noise source that could cause polarization leakage. In the PB-2A receiver system, a continuously rotating half-wave plate (HWP) is used to mitigate the polarization leakage. However, due to the rapid modulation of the polarization signal, the uncertainty in the time constant of the detector results in an uncertainty in the polarization angle. For PB-2A, the time constant of each bolometer needs to be calibrated at the sub-millisecond level to avoid introducing bias to the polarization signal. We have developed a new calibrator system that can be used to calibrate the time constants of the detectors. In this study, we present the design of the calibration system and the preliminary results of the time constant calibration for PB-2A.

astro-ph.IM↗

arXiv2024

Metastable ordered states induced by low temperature annealing of {\delta}-Ag2/3V2O5

In {\delta}-Ag2/3V2O5 with charge degrees of freedom in V, it is known that the charge ordering state and physical properties of V that appear at low temperatures depend strongly on the ordering state of Ag. In this study, we focused on the Ag ions in the interlayer and studied the structure using synchrotron radiation powder diffraction in dependence on temperature. We found that when the sample is slowly cooled from room temperature and ordering occurs at the Ag sites, V4+/V5+ charge ordering of V and subsequent V4+-V4+ structural dimers are produced. Although quenching the sample from room temperature suppresses the ordering of Ag, annealing at around 160 K promotes partial ordering of Ag and allows a metastable phase to be realized. This metastable phase is maintained even when the temperature is lowered again, producing a remarkable change in low-temperature properties. These results indicate that the ordered state of Ag, which is the key to control the charge-ordered state and physical properties, can be controlled by low-temperature annealing. The results of this study may provide a methodology for the realization of metastable states in a wide range of material groups of vanadium compounds, where competition among various charge ordered states underlies the physical properties.

cond-mat.str-el↗

arXiv2023

Zigzag chain order of LiVSe$_2$ developing away from the vanadium trimer phase transition boundary

The phenomenon of self-assembly of constituent elements to form molecules at low temperatures appears ubiquitously in transition metal compounds with orbital degrees of freedom. Recent progress in local structure studies using synchrotron radiation x-rays is shifting the interest in structural studies in such molecule-forming systems from the low-temperature ordered phase to the short-range order that appears like a precursor at high temperatures. In this study, we discuss both experimentally and theoretically the relationship between the trimer structure that appears in the layered LiV$X_2$ ($X$ = O, S, Se) system with a two-dimensional triangular lattice of vanadium and the zigzag chain-like local structure that appears near the phase transition boundary where molecular formation occurs. The vanadium trimerization that persistently appears in both low-temperature phases of LiVO$_2$ and LiVS$_2$ disappears in LiVSe$_2$, and a regular triangular lattice is thought to be realized in LiVSe$_2$, but this study reveals that the zigzag chain local distortion appears with a finite correlation length. This zigzag chain state local distortions are similar to the motif of local distortions in the high-temperature phase of LiVS$_2$, indicating that the local distortions are persistent away from the trimer phase transition boundary. On the other hand, it is concluded that the zigzag chain order appearing in LiVSe$_2$ is more stable than that in LiVS$_2$ in terms of the temperature variation of atomic displacement and correlation length. The zigzag chain order is considered to be competitive with the trimer order appearing in the LiV$X_2$ system. In this paper, we discuss the similarities and differences between the parameters that stabilize these electronic phases and the local distortions that appear in other molecular formation systems.

cond-mat.str-el↗

arXiv2023

Characterization of a half-wave plate for cosmic microwave background circular polarization measurement with POLARBEAR

A half-wave plate (HWP) is often used as a modulator to suppress systematic error in the measurements of cosmic microwave background (CMB) polarization. A HWP can also be used to measure circular polarization (CP) through its optical leakage from CP to linear polarization. The CP of the CMB is predicted from various sources, such as interactions in the Universe and extension of the standard model. Interaction with supernova remnants of population III stars is one of the brightest CP sources. Thus, the observation of the CP of CMB is a new tool for searching for population III stars. In this paper, we demonstrate the improved measurement of the leakage coefficient using the transmission measurement of an actual HWP in the laboratory. We measured the transmittance of linearly polarized light through the HWP used in \textsc{Polarbear} in the frequency range of \SIrange{120}{160}{GHz}. We evaluate properties of the HWP by fitting the data with a physical model using the Markov Chain Monte Carlo method. We then estimate the band-averaged CP leakage coefficient using the physical model. We find that the leakage coefficient strongly depends on the spectra of CP sources. We thus calculate the maximum fractional leakage coefficient from CP to linear polarization as $0.133 \pm 0.009$ in the Rayleigh--Jeans spectrum. The nonzero value shows that \textsc{Polarbear} has sensitivity to CP. Additionally, because we use the bandpass of detectors installed in the telescope to calculate the band-averaged values, we also consider systematic effects in the experiment.

astro-ph.CO↗

arXiv2023

Observation of local atomic displacements intrinsic to the double zigzag chain structure of 1T-MTe2 (M = V, Nb, Ta)

We describe the existence of local distortion discovered in the synchrotron x-ray single-crystal structure analysis of layered ditelluride 1T-MTe2 (M = V, Nb, Ta). In 1T-TaTe2, the double zigzag chain structure of Ta is deformed at about 170 K, and heptamer molecules are formed periodically at low temperatures. We found that some of the Ta atoms that compose the double zigzag chain structure appearing at high temperatures are locally displaced, resulting in local dimerization. This tendency weakens when Ta is replaced by V or Nb. Our results indicate that the local distortion persistently survives in these ditellurides, where the electronic degrees of freedom, including orbitals, are weakened. We further discuss the origin of local distortion in these ditellurides, which is different from many usual material systems where molecular formation occurs at low temperatures.

cond-mat.str-el↗

arXiv2023

Probing Cosmic Inflation with the LiteBIRD Cosmic Microwave Background Polarization Survey

LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$μ$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects.

astro-ph.IM↗

arXiv2023

Short-range order and increased transition temperature in LiVO2 with weakened trimer frustration

Vanadium atoms in layered LiVO2 form in-plane periodic vanadium trimers at low temperatures, but the trimers appear randomly in the stacking direction because there are many trimer configurations with comparable lattice energy. We detailed an original modeling scheme to represent glassy states with a completely disordered trimer configuration in the stacking structure. Through PDF analysis using this model, we show that the synthesis method can yield two types of low-temperature stacking structures: a completely disordered stacking structure and a short-range order in the stacking structure. The phase transition temperature of the former sample is about 15 K lower than that of the latter. We discuss that this is due to the strong trimer frustration that appears in the sample without short-range order, which suppresses the phase transition temperature, similar to the frustration effect in conventional spin systems.

cond-mat.str-el↗

arXiv2022

The POLARBEAR-2 and Simons Array Focal Plane Fabrication Status

We present on the status of POLARBEAR-2 A (PB2-A) focal plane fabrication. The PB2-A is the first of three telescopes in the Simon Array (SA), which is an array of three cosmic microwave background (CMB) polarization sensitive telescopes located at the POLARBEAR (PB) site in Northern Chile. As the successor to the PB experiment, each telescope and receiver combination is named as PB2-A, PB2-B, and PB2-C. PB2-A and -B will have nearly identical receivers operating at 90 and 150 GHz while PB2-C will house a receiver operating at 220 and 270 GHz. Each receiver contains a focal plane consisting of seven close-hex packed lenslet coupled sinuous antenna transition edge sensor bolometer arrays. Each array contains 271 di-chroic optical pixels each of which have four TES bolometers for a total of 7588 detectors per receiver. We have produced a set of two types of candidate arrays for PB2-A. The first we call Version 11 (V11) and uses a silicon oxide (SiOx) for the transmission lines and cross-over process for orthogonal polarizations. The second we call Version 13 (V13) and uses silicon nitride (SiNx) for the transmission lines and cross-under process for orthogonal polarizations. We have produced enough of each type of array to fully populate the focal plane of the PB2-A receiver. The average wirebond yield for V11 and V13 arrays is 93.2% and 95.6% respectively. The V11 arrays had a superconducting transition temperature (Tc) of 452 +/- 15 mK, a normal resistance (Rn) of 1.25 +/- 0.20 Ohms, and saturations powers of 5.2 +/- 1.0 pW and 13 +/- 1.2 pW for the 90 and 150 GHz bands respectively. The V13 arrays had a superconducting transition temperature (Tc) of 456 +/-6 mK, a normal resistance (Rn) of 1.1 +/- 0.2 Ohms, and saturations powers of 10.8 +/- 1.8 pW and 22.9 +/- 2.6 pW for the 90 and 150 GHz bands respectively.

astro-ph.IM↗

arXiv2022

Pressure suppression of the excitonic insulator state in Ta2NiSe5 observed by optical conductivity

The layered chalcogenide Ta2NiSe5 has recently attracted much interest as a strong candidate for the long sought excitonic insulator (EI). Since the physical properties of an EI are expected to depend sensitively on the external pressure, it is important to clarify the pressure evolution of microscopic electronic state in Ta2NiSe5. Here we report the optical conductivity [s(w)] of Ta2NiSe5 measured at high pressures to 10 GPa and at low temperatures to 8 K. With cooling at ambient pressure, s(w) develops an energy gap of about 0.17 eV and a pronounced excitonic peak at 0.38 eV, as already reported in the literature. Upon increasing pressure, the energy gap becomes narrower and the excitonic peak is broadened. Above a structural transition at Ps~3 GPa, the energy gap becomes partially filled, indicating that Ta2NiSe5 is a semimetal after the EI state is suppressed by pressure. At higher pressures, s(w) exhibits metallic characteristics with no energy gap. The detailed pressure evolution of s(w) is presented, and discussed mainly in terms of a weakening of excitonic correlation with pressure.

cond-mat.str-el↗

arXiv2022

Improved upper limit on degree-scale CMB B-mode polarization power from the 670 square-degree POLARBEAR survey

We report an improved measurement of the degree-scale cosmic microwave background $B$-mode angular-power spectrum over 670 square-degree sky area at 150 GHz with POLARBEAR. In the original analysis of the data, errors in the angle measurement of the continuously rotating half-wave plate, a polarization modulator, caused significant data loss. By introducing an angle-correction algorithm, the data volume is increased by a factor of 1.8. We report a new analysis using the larger data set. We find the measured $B$-mode spectrum is consistent with the $Λ$CDM model with Galactic dust foregrounds. We estimate the contamination of the foreground by cross-correlating our data and Planck 143, 217, and 353 GHz measurements, where its spectrum is modeled as a power law in angular scale and a modified blackbody in frequency. We place an upper limit on the tensor-to-scalar ratio $r$ < 0.33 at 95% confidence level after marginalizing over the foreground parameters.

astro-ph.CO↗

arXiv2022

Observation of the bands with $d_{xy}$ orbital character near the Fermi level in NdFeAs$_{1-x}$P$_{x}$O$_{0.9}$F$_{0.1}$ using angle-resolved photoemission spectroscopy

We studied the band structure of NdFeAs$_{1-x}$P$_{x}$O$_{0.9}$F$_{0.1}$ ($x$ = 0, 0.2, 0.4 and 0.6) using angle-resolved photoemission spectroscopy (ARPES) measurements. Two of the hole bands, $α_1$ $(d_{xz})$ and $α_3$ $(d_{z^2})$, were observed at the Brillouin zone center in the $P$-polarized light configuration, while the other two hole bands, $α_2$ $(d_{yz})$ and $γ$ $(d_{xy})$, were observed in the $S$-polarized alternative. The observed $γ$ band shifts downwards as $x$ increases, which is consistent with the theoretical prediction for the change in bond angle of As/P-Fe-As/P. Furthermore, a small amount of the $d_{xy}$ orbital component was observed at the same binding energy as that of the top of the $α_1$ band, thus indicating the band reconstruction of the originally degenerate $α_1$ and $α_2$ $(d_{xz}/d_{yz})$ bands by the unoccupied $d_{xy}$ band. The change in the energy level of the $α_1$ band top with $d_{xy}$ orbital character is accompanied by a $T_{c}$ upturn at $0.2 < x < 0.4$. The $T_{c}$ continues to increase as the $α_1$ band shifts downward, crossing the Fermi level. The incipient band with the $d_{xy}$ orbital character on its top could be an important ingredient for high $T_{c}$ 1111-type iron-based superconductors.

cond-mat.str-el↗

arXiv2021

LiteBIRD: JAXA's new strategic L-class mission for all-sky surveys of cosmic microwave background polarization

LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes.

astro-ph.IM↗

arXiv2021

Concept Design of Low Frequency Telescope for CMB B-mode Polarization satellite LiteBIRD

LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented.

astro-ph.IM↗

arXiv2020

Broadband, millimeter-wave anti-reflective structures on sapphire ablated with femto-second laser

We designed, fabricated, and measured anti-reflection coating (ARC) on sapphire that has 116% fractional bandwidth and transmission of at least 97% in the millimeter wave band. The ARC was based on patterning pyramid-like sub-wavelength structures (SWS) using ablation with a 15 W femto-second laser operating at 1030 nm. One side of each of two discs was fabricated with SWS that had a pitch of 0.54 mm and height of 2 mm. The average ablation volume removal rate was 1.6 mm$^{3}$/min. Measurements of the two-disc sandwich show transmission higher than 97% between 43 and 161 GHz. We characterize instrumental polarization (IP) arising from differential transmission due to asymmetric SWS. We find that with proper alignment of the two disc sandwich RMS IP across the band is predicted to be 0.07% at normal incidence, and less than 0.6% at incidence angles up to 20 degrees. These results indicate that laser ablation of SWS on sapphire and on other hard materials such as alumina is an effective way to fabricate broad-band ARC.

astro-ph.IM↗

arXiv2020

A minimal power-spectrum-based moment expansion for CMB B-mode searches

The characterization and modeling of polarized foregrounds has become a critical issue in the quest for primordial $B$-modes. A typical method to proceed is to factorize and parametrize the spectral properties of foregrounds and their scale dependence (i.e. assuming that foreground spectra are well described everywhere by their sky average). Since in reality foreground properties vary across the Galaxy, this assumption leads to inaccuracies in the model that manifest themselves as biases in the final cosmological parameters (in this case the tensor-to-scalar ratio $r$). This is particularly relevant for surveys over large fractions of the sky, such as the Simons Observatory (SO), where the spectra should be modeled over a distribution of parameter values. Here we propose a method based on the existing ``moment expansion'' approach to address this issue in a power-spectrum-based analysis that is directly applicable in ground-based multi-frequency data. Additionally, the method uses only a small set of parameters with simple physical interpretation, minimizing the impact of foreground uncertainties on the final $B$-mode constraints. We validate the method using SO-like simulated observations, recovering an unbiased estimate of the tensor-to-scalar ratio $r$ with standard deviation $σ(r)\simeq0.003$, compatible with official forecasts. When applying the method to the public BICEP2/Keck data, we find an upper bound $r<0.06$ ($95\%\,{\rm C.L.}$), compatible with the result found by BICEP2/Keck when parametrizing spectral index variations through a scale-independent frequency decorrelation parameter. We also discuss the formal similarities between the power spectrum-based moment expansion and methods used in the analysis of CMB lensing.

astro-ph.CO↗

arXiv2020

Robust atomic orbital in the cluster magnet LiMoO2

In this study, we present a rutile-related material, LiMoO2, that becomes a cluster magnet and exhibits a spin singlet formation on a preformed molybdenum dimer upon cooling. Unlike ordinary cluster magnets, the atomic dyz orbital robustly survives despite the formation of molecular orbitals, thereby affecting the magnetic properties of the selected material. Such hybrid cluster magnets with the characters of molecular and atomic orbitals realize multiple independent spins on an isolated cluster, leading to an ideal platform to study the isolated spin dimers physics.

cond-mat.str-el↗