SearcharxivSearch

arXiv subjects

N. Moffat

Publications and source records attributed to N. Moffat.

2 recordsLinked to original sources

26.5 ps Time Resolution Using 50 {\mu}m Low Gain Avalanche Detectors Fabricated by Micron Semiconductor Ltd

Low Gain Avalanche Detectors (LGADs) are silicon semiconductor sensors with an implanted thin p-doped multiplication layer that is designed to provide low gain. Most importantly, LGADs are specifically engineered to provide excellent spatial and temporal resolution simultaneously. The technology shows promising prospects of fulfilling the 4D tracking requirements of future high energy physics experiments. Micron Semiconductor Ltd. has fabricated LGADs with an active thickness of 50 $\mu$m. The electrical and timing performance has been measured and compared with devices fabricated at IMB-CNM for reference. 50 $\mu$m thin LGADs by Micron Semiconductor Ltd. were measured to have a timing resolution in the region of 30 ps using a dedicated setup involving minimum ionising particles produced by Sr-90. Specifically, the best timing resolution of 26.5 ps was measured at a bias voltage of 200 V at -30{\deg}C.

physics.ins-det

Inverse Low Gain Avalanche Detector (iLGAD) Periphery Design for X-Ray Applications

LGAD technology is established within the field of particle physics, as the baseline technology for the timing detectors of both the ATLAS and CMS upgrades at the HL-LHC. Pixelated LGADs have been proposed for the High Granularity Timing Detector (HGTD) and for the Endcap Timing Layer (ETL) of the ATLAS and CMS experiments, respectively. The drawback of segmenting an LGAD is the non-gain area between pixels and the consequent reduction in the fill factor. In this sense, inverse LGAD (iLGAD) technology has been proposed by IMB-CNM to enhance the fill factor and to reach excellent tracking capabilities. In this work, we explore the use of iLGAD sensors for X-Ray applications by developing a new generation of iLGADs. The periphery of the first iLGAD generation is optimized by means of TCAD tools, making them suitable for X-Ray irradiations thanks to the double side optimization. The fabricated iLGAD sensors exhibit good electrical performances before and after an X-Ray irradiation. The second iLGAD generation is able to withstand the same voltage, as contrary to the first iLGAD generation after irradiation.

physics.ins-det