arXiv subjects

N. P. Vizarim

Publications and source records attributed to N. P. Vizarim.

At least 19 recordsLinked to original sources

arXiv2025

Skyrmion behavior in attractive-repulsive square array of pinning centers

We investigate the driven dynamics of a single skyrmion in a square lattice of mixed pinning sites, where attractive and repulsive defects coexist using a particle-based model. The mixed landscape yields directional locking at $θ_{\rm sk}=-45^\circ$ and flow at locked angles near the intrinsic skyrmion Hall angle. By mapping defect strengths, we show that weaker attraction lowers the depinning threshold, whereas stronger repulsion stabilizes and broadens the $-45^\circ$ locking plateau. Moreover, combinations of attractive and repulsive defect strengths allows control of directional lockings and their force ranges. Defect size further tunes the response, selecting among $-45^\circ$, $-50^\circ$, $-55^\circ$, and $\approx-59^\circ$. These results establish mixed pinning as a practical knob to steer skyrmion trajectories and the effective Hall response, providing design guidelines for skyrmion-based memory and logic devices.

cond-mat.mes-hall↗

arXiv2025

Many-body skyrmion interactions in helimagnets

Many-body interactions strongly influence the structure, stability, and dynamics of condensed-matter systems, from atomic lattices to interacting quasi-particles such as superconducting vortices. Here, we investigate theoretically the pairwise and many-body interaction terms among skyrmions in helimagnets, considering both the ferromagnetic and conical spin backgrounds. Using micromagnetic simulations, we separate the exchange, Dzyaloshinskii-Moriya, and Zeeman contributions to the skyrmion-skyrmion pair potential, and show that the binding energy of skyrmions within the conical phase depends strongly on the film thickness. For small skyrmion clusters in the conical phase, three-body interactions make a substantial contribution to the cohesive energy, comparable to that of pairwise terms, while four-body terms become relevant only at small magnetic fields. As the system approaches the ferromagnetic phase, these higher-order contributions vanish, and the interactions become essentially pairwise. Our results indicate that realistic models of skyrmion interactions in helimagnets in the conical phase must incorporate many-body terms to accurately capture the behavior of skyrmion crystals and guide strategies for controlling skyrmion phases and dynamics.

cond-mat.mes-hall↗

arXiv2025

Diode Effect for Skyrmions Interacting with Linear Protrusion Defects

We simulate collectively interacting skyrmions in a channel with periodic asymmetry, and find a strong diode effect for the skyrmion flow. There is also an asymmetry in the skyrmion annihilation rate for currents applied along the hard or easy substrate asymmetry direction, with a higher annihilation rate for hard direction currents. We map out the diode efficiency as a function of magnetic field and substrate asymmetry angle. We also show that the Magnus force impacts the diode motion and annihilation rate asymmetry by forcing skyrmions into corners of the protrusion geometry.

cond-mat.mes-hall↗

arXiv2025

Ordered and Disordered Skyrmion States on a Square Substrate

We examine the ordering of skyrmions interacting with a square substrate created from a modulation of anisotropy using atomistic simulations. We consider fillings of {\it f} = 1.5, 2.0, 2.5, 3.0, and 3.5 skyrmions per potential minimum as a function of magnetic field and sample size. For a filling of {\it f} = 2.0, we find various dimer orderings, such as tilted dimer states, as well as antiferromagnetic ordering that is similar to the colloidal dimer ordering seen on square substrates. The ability of the skyrmions to change shape or annihilate produces additional states that do not occur in the colloidal systems. For certain parameters at {\it f} = 2.0, half of the skyrmions can annihilate to form a square lattice, or a superlattice of trimers and monomers containing skyrmions of different sizes can form. At lower fields, ordered stretched skyrmion states can appear, and for zero field, there can be ordered stripe states. For {\it f} = 3.0, we find ferromagnetic ordered trimers, tilted lattices, columnar lattices, and stretched phases. For fillings of {\it f} = 1.5 and 2.5, we find bipartite lattices, different ordered and disordered states, and several extended disordered regions produced by frustration effects.

cond-mat.mes-hall↗

arXiv2025

Sliding Dynamics of Skyrmion Molecular Crystals

Using both atomistic and particle-based simulations, we investigate the current-driven dynamics of skyrmions on two-dimensional periodic substrates when there are multiple skyrmions per substrate minimum. At zero drive, the system forms pinned skyrmion molecular crystal states consisting of dimers, trimers, or dimer-trimer mixtures that have both positional and orientational order. On a square substrate lattice, the motion above depinning occurs via a running soliton that travels completely transverse to the applied current. This motion is generated by a torque from the Magnus force, which rotates the $n$-mer states perpendicular to the applied current. At higher drives, the flow becomes disordered while the Hall angle diminishes and gradually approaches the intrinsic value. In some cases, we also find directional locking where the Hall angle becomes locked to certain symmetry directions of the substrate over a range of currents. The transitions into and out of directionally locked states are accompanied by negative differential mobility in which the net velocity decreases as the drive increases. On a triangular substrate, we find no transverse mobility effects, but still observe directionally locked motion.

cond-mat.mes-hall↗

arXiv2025

Skyrmion-Skyrmionium Phase Separation and Laning Transitions via Spin-Orbit Torque Currents

Many driven binary systems can exhibit laning transitions when the two species have different mobilities, such as colloidal particles with opposite charges in electric fields. Another example is pedestrian or active matter systems, where particles moving in opposite directions form a phase-separated state that enhances the overall mobility. In this work, we use atomistic simulations to demonstrate that mixtures of skyrmions and skyrmioniums also exhibit pattern formation and laning transitions. Skyrmions move more slowly and at a finite Hall angle compared to skyrmioniums, which move faster and without a Hall effect. At low drives, the system forms a partially jammed phase where the skyrmionium is dragged by the surrounding skyrmions, resulting in a finite angle of motion for the skyrmionium. At higher drives, the system transitions into a laned state, but unlike colloidal systems, the lanes in the skyrmion skyrmionium mixture are tilted relative to the driving direction due to the intrinsic skyrmion Hall angle. In the laned state, the skyrmionium angle of motion is reversed when it aligns with the tilted lane structure. At even higher drives, the skyrmioniums collapse into skyrmions. Below a critical skyrmion density, both textures can move independently with few collisions, but above this density, the laning state disappears entirely, and the system transitions to a skyrmion-only state. We map out the velocity and Hall responses of the different textures and identify three distinct phases: partially jammed, laned, and skyrmion-only moving crystal states. We compare our results to recent observations of tilted laning phases in pedestrian flows, where chiral symmetry breaking in the particle interactions leads to similar behavior.

cond-mat.mes-hall↗

arXiv2025

Topological Transitions, Pinning and Ratchets for Driven Magnetic Hopfions in Nanostructures

Using atomistic simulations, we examine the dynamics of three-dimensional magnetic hopfions interacting with an array of line defects or posts as a function of defect spacing, defect strength, and current. We find a pinned phase, a sliding phase where a hopfion can move through the posts or hurdles by distorting, and a regime where the hopfion becomes compressed and transforms into a toron that is half the size of the hopfion and moves at a lower velocity. The toron states occur when the defects are strong; however, in the toron regime, it is possible to stabilize sliding hopfions by increasing the applied current. Hopfions move without a Hall angle, while the toron moves with a finite Hall angle. We also show that when a hopfion interacts with an asymmetric array of planar defects, a ratchet effect consisting of a net dc motion can be realized under purely ac driving.

cond-mat.mes-hall↗

arXiv2025

Skyrmionium Dynamics and Stability on One Dimensional Anisotropy Patterns

We examine a skyrmionium driven over a periodic anisotropy pattern, which consists of disorder free regions and disordered regions. For small defect densities, the skyrmionium flows for an extended range of currents, and there is a critical current above which it transforms into a skyrmion. For increased amounts of quenched disorder, the current needed for the skyrmionium to transform into a skyrmion decreases, and there is a critical disorder density above which a moving skyrmionium is not stable. In the moving state, the skyrmionium to skyrmion transformation leads to a drop in the velocity and the onset of a finite skyrmion Hall angle. We also find a reentrance effect in which the pinned skyrmionium transforms into a skyrmion just above depinning, restabilizes into skyrmionium at larger drives, and becomes unstable again at large currents. We also show that adding a transverse shaking drive can increase the lifetime of a moving skyrmionium by reducing the effect of the pinning in the direction of the drive.

cond-mat.mes-hall↗

arXiv2024

Comparing Dynamics, Pinning and Ratchet Effects for Skyrmionium, Skyrmions, and Antiskyrmions

We compare the driven dynamics of skyrmions, antiskyrmions, and skyrmionium interacting with random disorder, circular defects, and asymmetric potentials. When interacting with a line defect at a constant drive, skyrmions and antiskyrmions show an acceleration effect for motion along the wall and a drop in velocity when they can cross the barrier. In contrast, skyrmionium travels at a reduced velocity when moving along a wall, and exhibits an increase in velocity once it can cross the barrier. For point defects, skyrmionium can be pinned for a finite fixed period of time, while for skyrmions and antiskyrmions, the Magnus force creates a deflection from the defect and an acceleration effect. For a given drive, skyrmionium moves twice as fast as skyrmions; however, skyrmionium is more susceptible to pinning effects than skyrmions and antiskyrmions. Additionally, there is a critical threshold where the skyrmionium transforms to a skyrmion that is associated with a drop in the velocity of the texture. We show that all three textures exhibit diode and ratchet effects when interacting with an asymmetric substrate, but skyrmions and antiskyrmions show a stronger ratcheting effect than skyrmionium due to the Magnus force.

cond-mat.mes-hall↗

arXiv2024

Skyrmion soliton motion on periodic substrates by atomistic and particle based simulations

We compare the dynamical behavior of magnetic skyrmions interacting with square and triangular defect arrays just above commensuration using both an atomistic model and a particle-based model. Under an applied drive, the initial motion is a kink traveling through the pinned skyrmion lattice. For the square defect array, both models agree well and show a regime in which the soliton motion is locked along 45$^\circ$. The atomistic model also produces locking of a soliton along 30$^\circ$, while the particle-based model does not. For the triangular defect array, the atomistic model exhibits soliton motion locked to 30$^\circ$ over a wide region of external driving force values. In contrast, the particle-based model gives soliton motion locked to 45$^\circ$ over only a small range of external driving force values. The difference arises because the nondeforming particle model facilitates meandering skyrmion orbits while the deformable atomistic model enables stronger skyrmion-skyrmion interactions that reduce the meandering. Our results indicate that soliton motion through pinned skyrmion lattices on a periodic substrate is a robust effect and could open the possibility of using solitons as information carriers. Our results also provide a better understanding of the regimes for which particle-based models of skyrmions are best suited.

cond-mat.mes-hall↗

arXiv2024

Reversible to Irreversible Transitions for ac Driven Skyrmions on Periodic Substrates

Using atomistic simulations, we investigate the dynamical behavior of magnetic skyrmions in dimer and trimer molecular crystal arrangements, as well as bipartite lattices at 3/2 and 5/2 fillings, under ac driving over a square array of anisotropy defects. For low ac amplitudes, at all fillings we find reversible motion where the skyrmions return to their original positions at the end of each ac drive cycle and the diffusion is zero. We also identify two distinct irreversible regimes. The first is a translating regime in which the skyrmions form channels of flow in opposing directions and translate by one substrate lattice constant per ac drive cycle. The translating state appears in the dimer and trimer states, and produces pronounced peaks in the diffusivity in the direction perpendicular to the external drive. For larger ac amplitudes, we find chaotic irreversible motion in which the skyrmions can randomly exchange places with each other over time, producing long-time diffusive behavior both parallel and perpendicular to the ac driving direction.

cond-mat.mes-hall↗

arXiv2024

Skyrmion Molecular Crystals and Superlattices on Triangular Substrates

Using atomistic simulations, we show that new types of skyrmion states called skyrmion molecular crystals and skyrmion superlattices can be realized on triangular substrates when there are two or three skyrmions per substrate minimum. We find that as a function of the magnetic field and substrate periodicity, a remarkably wide variety of ordered phases appear similar to those found in colloidal or Wigner molecular crystals, including ferromagnetic and herringbone states. The ability of the skyrmions to annihilate, deform, and change size gives rise to a variety of superlattice states in which a mixture of different skyrmion sizes and shapes produces bipartate or more complex lattice structures. Our results are relevant for skyrmions on structured triangular substrates, in magnetic arrays, or skyrmions in moire materials.

cond-mat.mes-hall↗

arXiv2024

Shapiro Steps and Stability of Skyrmions Interacting with Alternating Anisotropy Under the Influence of ac and dc Drives

We use atomistic simulations to examine the sliding dynamics of a skyrmion in a two-dimensional system containing a periodic one-dimensional stripe pattern of variations between low and high values of the perpendicular magnetic anisotropy. The skyrmion changes in size as it crosses the interface between two anisotropy regions. Upon applying combined dc and ac driving in either parallel or perpendicular directions, we observe a wide variety of Shapiro steps, Shapiro spikes, and phase-locking phenomena. The phase-locked orbits have two-dimensional dynamics due to the gyrotropic or Magnus dynamics of the skyrmions, and are distinct from the phase-locked orbits found for strictly overdamped systems. Along a given Shapiro step when the ac drive is perpendicular to the dc drive, the velocity parallel to the ac drive is locked while the velocity in the perpendicular direction increases with increasing drive to form Shapiro spikes. At the transition between adjacent Shapiro steps, the parallel velocity jumps up to the next step value, and the perpendicular velocity drops. The skyrmion Hall angle shows a series of spikes as a function of increasing dc drive, where the jumps correspond to the transition between different phase-locked steps. At high drives, the Shapiro steps and Shapiro spikes are lost. When both the ac and dc drives are parallel to the stripe periodicity direction, Shapiro steps appear, while if the dc drive is parallel to the stripe periodicity direction and the ac drive is perpendicular to the stripe periodicity, there are only two locked phases, and the skyrmion motion consists of a combination of sliding along the interfaces between the two anisotropy values and jumping across the interfaces.

cond-mat.mes-hall↗

arXiv2023

Controlled Skyrmion Ratchet in Linear Protrusion Defects

Using atomistic simulations, we investigate the dynamical behavior of a single skyrmion interacting with an asymmetric linear protrusion array under external ac driving. When the ac drive is applied along the $x$ direction, the skyrmion moves along the hard direction of the substrate asymmetry in three phases: a pinned phase with localized skyrmion orbits, a constant velocity phase where the orbits become delocalized, and a reentrant pinned phase with larger localized orbits. We measure the dependence of the skyrmion velocity on the frequency and amplitude of the ac drive. All three phases appear for all frequency values, and in the constant velocity phase the skyrmion velocity depends only on the frequency and not on the amplitude of the ac drive. When ac driving is applied in the $y$ direction, the skyrmion moves along the easy direction of the substrate asymmetry and exhibits the same three phases as for $x$ direction driving along with a fourth phase which, at high driving frequencies, consists of a series of constant velocity phases, each with different average skyrmion velocities. For low frequencies, the constant velocity phase is lost and the skyrmion speed increases linearly with increasing ac drive amplitude due to a Magnus boost effect. Our findings suggest new ways to create reliable data transport for spintronic devices using skyrmions as information carriers, where the skyrmion direction and speed can be controlled by varying only the ac drive amplitude and frequency.

cond-mat.mes-hall↗

arXiv2023

Skyrmion Transport and Annihilation in Funnel Geometries

Using atomistic simulations, we have investigated the transport and annihilation of skyrmions interacting with a funnel array under a current applied perpendicular to the funnel axis. We find that transport without annihilation is possible at low currents, when the motion is dominated by skyrmion-skyrmion interactions and skyrmions push each other through the funnel opening. Skyrmion annihilation occurs for higher currents when skyrmions in the upper half of the sample exert pressure on skyrmions in the bottom half of the sample due to the external current. Upon interacting with the funnel wall, the skyrmions undergo a size reduction that makes it easier for them to pass through the funnel opening. We find five phases as a function of the applied current and the size of the funnel opening: (i) pinned, (ii) transport without annihilation, (iii) transport with annihilation, (iv) complete annihilation, and (v) a reentrant pinning phase that only occurs for very narrow openings. Our findings provide insight into how to control skyrmion transport using funnel arrays by delineating regimes in which transport of skyrmions is possible as well as the conditions under which annihilation occurs.

cond-mat.mes-hall↗

arXiv2023

Soliton motion induced along ferromagnetic skyrmion chains in chiral thin nanotracks

Using atomistic magnetic simulations we investigate the soliton motion along a pinned skyrmion chain containing an interstitial skyrmion. We find that the soliton can exhibit stable motion along the chain without a skyrmion Hall effect for an extended range of drives. Under a constant drive the solitons have a constant velocity. We also measure the skyrmion velocity-current curves and identify the signatures of different phases including a pinned phase, stable soliton motion, and quasi-free motion at higher drives where all of the skyrmions depin from the pinning centers and move along the rigid wall. In the quasi-free motion regime, the velocity is oscillatory due to the motion of the skyrmions over the pinning sites. For increasing pinning strength, the onset of soliton motion shifts to higher values of current density. We also find that for stronger pinning, the characteristic velocity-current shape is affected by the annihilation of single or multiple skyrmions in the drive interval over which the soliton motion occurs. Our results indicate that stable skyrmion soliton motion is possible and could be useful for technological applications.

cond-mat.mes-hall↗

arXiv2023

Spontaneous Skyrmion Conformal Lattice and Transverse Motion During dc and ac Compression

We use atomistic-based simulations to investigate the behavior of ferromagnetic skyrmions being continuously compressed against a rigid wall under dc and ac drives. The compressed skyrmions can be annihilated close to the wall and form a conformal crystal with both a size and a density gradient, making it distinct from conformal crystals observed previously for superconducting vortices and colloidal particles. For both dc and ac driving, the skyrmions can move transverse to the compression direction due to a combination of density and size gradients. Forces in the compression direction are converted by the Magnus force into transverse motion. Under ac driving, the amount of skyrmion annihilation is reduced and we find a skyrmion Magnus ratchet pump. We also observe shear banding in which skyrmions near the wall move up to twice as fast as skyrmions further from the wall. When we vary the magnitude of the applied drive, we find a critical current above which the skyrmions are completely annihilated during a time scale that depends on the magnitude of the drive. By varying the magnetic parameters, we find that the transverse motion is strongly dependent on the skyrmion size. Smaller skyrmions are more rigid, which interferes with the size gradient and destroys the transverse motion. We also confirm the role of the size gradient by comparing our atomistic simulations with a particle-based model, where we find that the transverse motion is only transient. Our results are relevant for applications where skyrmions encounter repulsive magnetic walls, domain walls, or interfaces.

cond-mat.mes-hall↗

arXiv2022

Magnus Induced Diode Effect for Skyrmions in Channels with Periodic Potentials

Using a particle based model, we investigate the skyrmion dynamical behavior in a channel where the upper wall contains divots of one depth and the lower wall contains divots of a different depth. Under an applied driving force, skyrmions in the channels move with a finite skyrmion Hall angle that deflects them toward the upper wall for $-x$ direction driving and the lower wall for $+x$ direction driving. When the upper divots have zero height, the skyrmions are deflected against the flat upper wall for $-x$ direction driving and the skyrmion velocity depends linearly on the drive. For $+x$ direction driving, the skyrmions are pushed against the lower divots and become trapped, giving reduced velocities and a nonlinear velocity-force response. When there are shallow divots on the upper wall and deep divots on the lower wall, skyrmions get trapped for both driving directions; however, due to the divot depth difference, skyrmions move more easily under $-x$ direction driving, and become strongly trapped for $+x$ direction driving. The preferred $-x$ direction motion produces what we call a Magnus diode effect since it vanishes in the limit of zero Magnus force, unlike the diode effects observed for asymmetric sawtooth potentials. We show that the transport curves can exhibit a series of jumps or dips, negative differential conductivity, and reentrant pinning due to collective trapping events. We also discuss how our results relate to recent continuum modeling on a similar skyrmion diode system.

cond-mat.mes-hall↗