arXiv subjects

N. Turner

Publications and source records attributed to N. Turner.

At least 19 recordsLinked to original sources

arXiv2026

CHARA/SPICA: The six-telescope visible combiner and near-infrared fringe tracker for the CHARA Array

The suite called Stellar Parameters and Images with a Cophased Array (SPICA) has two interferometric instruments installed at the focus of the CHARA Array located at Mount Wilson, CA. SPICA is made of SPICA-VIS, a fiber-fed six-beam visible spectrograph with three spectral resolutions, and SPICA-FT, a six-beam near-infrared fringe tracker for the fast stabilization of the fringes. SPICA is opening access to imaging in the visible domain with an unprecedented angular resolution down to 0.2 milliarcseconds. It has been designed around a large survey of fundamental parameters of stars over the Hertzsprung- Russell diagram, aiming at understanding the deviations from the standard empirical relations of stellar physics as a function of activity: limb darkening, multiplicity, rotation, winds, and environments. SPICA makes use of the advanced technologies in electron multiplying detectors in the visible and electron- avalanche photodiode arrays in the near-infrared. It benefits from the newly commissioned adaptive optics on the one-meter telescopes of the array. The modules of the visible instrument, SPICA-VIS, optimize the injection of light into single-mode fibers for spatial filtering before spectral dispersion in the image plane. The fringe tracker, SPICA-FT, performs group-delay and phase-delay tracking for six beams in the H band. SPICA-FT can use an all-in-one or ABCD encoding of the fringe signals. SPICA is operational on sky and is close to reaching the expected performance in low spectral resolution, in particular, for the Interferometric Survey of Stellar Parameters (ISSP). More work is still needed to achieve the ultimate performance in terms of sensitivity and to allow operations with higher spectral resolutions.

astro-ph.IM↗

arXiv2026

High Multiplicity Trigger for Long-Lived Particles in CMS detector

Searches for long-lived particles (LLPs) at the CMS experiment often involve unconventional event topologies that are difficult to efficiently select using standard trigger strategies. To improve sensitivity to such signatures during LHC Run~3 operation, a dedicated High Multiplicity Trigger (HMT) has been developed and deployed in the CMS trigger system. The trigger targets events containing unusually large numbers of hits in the CMS cathode strip chamber (CSC) muon detectors, a characteristic signature of several LLP scenarios involving displaced decays in the muon system. The HMT implementation, trigger logic, rate dependence with pileup, and operational stability are described. Optimized hit multiplicity thresholds are used to maintain acceptable trigger rates under high-luminosity and high-pileup conditions while preserving high efficiency across a broad range of LLP lifetimes and kinematic regimes. The trigger performance is evaluated using both simulated event samples and proton-proton collision data collected during Run~3 of the LHC. The HMT substantially extends the CMS sensitivity to non-standard signatures associated with LLP decays and provides a flexible platform for future searches for physics beyond the Standard Model.

hep-ex↗

arXiv2024

The Next Generation of MeV Energy X-ray Sources for use in the Inspection of Additively Manufactured Parts for Industry

For the first time, we demonstrate the application of an inverse Compton scattering X-ray Source, driven by a laser-plasma accelerator, to image an additively manufactured component. X-rays with a mean energy of 380 keV were produced and used to image an additively manufactured part made of an Inconel (Nickel 718) alloy. Because inverse Compton scattering driven by laser-plasma acceleration produces high-energy X-rays while maintaining a focal spot size on the order of a micron, the source can provide several benefits over conventional X-ray production methods, particularly when imaging superalloy parts, with the potential to revolutionise what can be inspected.

physics.acc-ph↗

arXiv2022

Hydro-, Magnetohydro-, and Dust-Gas Dynamics of Protoplanetary Disks

The building of planetary systems is controlled by the gas and dust dynamics of protoplanetary disks. While the gas is simultaneously accreted onto the central star and dissipated away by winds, dust grains aggregate and collapse to form planetesimals and eventually planets. This dust and gas dynamics involves instabilities, turbulence and complex non-linear interactions which ultimately control the observational appearance and the secular evolution of these disks. This chapter is dedicated to the most recent developments in our understanding of the dynamics of gaseous and dusty disks, covering hydrodynamic and magnetohydrodynamic turbulence, gas-dust instabilities, dust clumping and disk winds. We show how these physical processes have been tested from observations and highlight standing questions that should be addressed in the future.

astro-ph.EP↗

arXiv2020

Visible and near-infrared spectro-interferometric analysis of the edge-on Be star $ο$ Aquarii

We present a detailed visible and near-IR spectro-interferometric analysis of the Be-shell star $ο$ Aquarii from quasi-contemporaneous CHARA/VEGA and VLTI/AMBER observations. We measured the stellar radius of $ο$ Aquarii as 4.0 $\pm$ 0.3 $\mathrm{R_{\odot}}$. We constrained the disk geometry and kinematics using a kinematic model and a MCMC fitting procedure. The disk sizes in H$α$ and Br$γ$ were found to be similar, at $\sim$10-12 $\mathrm{D_{\star}}$, which is uncommon since most results for Be stars show a larger extension in H$α$ than in Br$γ$. We found that the inclination angle $i$ derived from H$α$ is significantly lower ($\sim$15 deg) than the one derived from Br$γ$. The disk kinematics were found to be near to the Keplerian rotation in Br$γ$, but not in H$α$. After analyzing all our data using a grid of HDUST models (BeAtlas), we found a common physical description for the disk in both lines: $Σ_{0}$ = 0.12 g cm\textsuperscript{-2} and $m$ = 3.0. The stellar rotational rate was found to be very close ($\sim$96\%) to the critical value. Our analysis of multi-epoch H$α$ profiles and imaging polarimetry indicates that the disk has been stable for at least 20 years. Compared to Br$γ$, the data in H$α$ shows a substantially different picture that cannot fully be understood using the current physical models of Be star disks. $ο$ Aquarii presents a stable disk, but the measured $m$ is lower than the standard value in the VDD model for steady-state. Such long-term stability can be understood in terms of the high rotational rate for this star, the rate being a main source for the mass injection in the disk. Our results on the stellar rotation and disk stability are consistent with results in the literature showing that late-type Be stars are more likely to be fast rotators and have stable disks.

astro-ph.SR↗

arXiv2017

The peculiar fast-rotating star 51 Oph probed by VEGA/CHARA

Stellar rotation is a key in our understanding of both mass-loss and evolution of intermediate and massive stars. It can lead to anisotropic mass-loss in the form of radiative wind or an excretion disk. We wished to spatially resolve the photosphere and gaseous environment of 51 Oph, a peculiar star with a very high vsin(i) of 267km s$^{-1}$ and an evolutionary status that remains unsettled. It has been classified by different authors as a Herbig, a $β$ Pic, or a classical Be star. We used the VEGA visible beam combiner installed on the CHARA array that reaches a submilliarcsecond resolution. Observation were centered on the H$α$ emission line. We derived, for the first time, the extension and flattening of 51 Oph photosphere. We found a major axis of $θ_{\mathrm{eq}}$=8.08$\pm$0.70$R_\odot$ and a minor axis of $θ_{\mathrm{pol}}$=5.66$\pm$0.23$R_\odot$ . This high photosphere distortion shows that the star is rotating close to its critical velocity. Finally, using spectro-interferometric measurements in the H$ α$ line, we constrained the circumstellar environment geometry and kinematics and showed that the emission is produced in a 5.2$\pm$2R$_{*}$ disk in Keplerian rotation. From the visible point of view, 51 Oph presents all the features of a classical Be star: near critical-rotation and double-peaked H$α$ line in emission produced in a gaseous disk in Keplerian rotation. However, this does not explain the presence of dust as seen in the mid-infrared and millimeter spectra, and the evolutionary status of 51 Oph remains unsettled.

astro-ph.EP↗

arXiv2016

Multiplicity of Galactic Cepheids from long-baseline interferometry~III. Sub-percent limits on the relative brightness of a close companion of $δ$~Cephei

We report new CHARA/MIRC interferometric observations of the Cepheid archetype $δ$ Cep, which aimed at detecting the newly discovered spectroscopic companion. We reached a maximum dynamic range $ΔH $ = 6.4, 5.8, and 5.2 mag, respectively within the relative distance to the Cepheid $r < 25$ mas, $25 < r < 50$ mas and $50 < r < 100$ mas. Our observations did not show strong evidence of a companion. We have a marginal detection at $3σ$ with a flux ratio of 0.21\%, but nothing convincing as we found other possible probable locations. We ruled out the presence of companion with a spectral type earlier than F0V, A1V and B9V, respectively for the previously cited ranges $r$. From our estimated sensitivity limits and the Cepheid light curve, we derived lower-limit magnitudes in the $H$ band for this possible companion to be $H_\mathrm{comp} > 9.15, 8.31$ and 7.77 mag, respectively for $r < 25$ mas, $25 < r < 50$ mas and $50 < r < 100$ mas. We also found that to be consistent with the predicted orbital period, the companion has to be located at a projected separation $< 24$ mas with a spectral type later than a F0V star.

astro-ph.SR↗

arXiv2015

The Ages of A-Stars I: Interferometric Observations and Age Estimates for Stars in the Ursa Major Moving Group

We have observed and spatially resolved a set of seven A-type stars in the nearby Ursa Major moving group with the Classic, CLIMB, and PAVO beam combiners on the CHARA Array. At least four of these stars have large rotational velocities ($v \sin i$ $\gtrsim$ 170 $\mathrm{km~s^{-1}}$) and are expected to be oblate. These interferometric measurements, the stars' observed photometric energy distributions, and $v \sin i$ values are used to computationally construct model oblate stars from which stellar properties (inclination, rotational velocity, and the radius and effective temperature as a function of latitude, etc.) are determined. The results are compared with MESA stellar evolution models (Paxton et al. 2011, 2013) to determine masses and ages. The value of this new technique is that it enables the estimation of the fundamental properties of rapidly rotating stars without the need to fully image the star. It can thus be applied to stars with sizes comparable to the interferometric resolution limit as opposed to those that are several times larger than the limit. Under the assumption of coevality, the spread in ages can be used as a test of both the prescription presented here and the MESA evolutionary code for rapidly rotating stars. With our validated technique, we combine these age estimates and determine the age of the moving group to be 414 $\pm$ 23 Myr, which is consistent with, but much more precise than previous estimates.

astro-ph.SR↗

arXiv2015

First Images of Cool Starspots on a Star Other than the Sun: Interferometric Imaging of $λ$ Andromedae

Presented are the first interferometric images of cool starspots on the chromospherically active giant $λ$ Andromedae. These images represent the first model-independent images of cool starspots on a star other than the Sun to date. The interferometric observations, taken with the Michigan Infra-Red Combiner coupled to the Center for High Angular Resolution Astronomy Array, span 26 days from Aug 17$^{th}$, 2008 to Sep 24$^{th}$, 2011. The photometric time series acquired at Fairborn Observatory spanning Sep 20$^{th}$, 2008 to Jan 20$^{th}$, 2011 is also presented. The angular diameter and power law limb-darkening coefficient of this star are 2.759 $\pm$ 0.050 mas and 0.229 $\pm$ 0.111, respectively. Starspot properties are obtained from both modeled and SQUEEZE reconstructed images. The images from 2010 through 2011 show anywhere from one to four starspots. The measured properties of identical starspots identified in both the model and reconstructed images are within two $σ$ error bars in 51$\%$ of cases. The cadence in the data for the 2010 and 2011 data sets are sufficient to measure a stellar rotation period based on apparent starspot motion. This leads to estimates of the rotation period (P$_{2010}$ = 60 $\pm$ 13 days, P$_{2011}$ = 54.0 $\pm$ 7.6 days) that are consistent with the photometrically determined period of 54.8 days. In addition, the inclination and position angle of the rotation axis is computed for both the 2010 and 2011 data sets; values ($\barΨ$ = 21.5$\degree$, $\bar{\emph{i}}$ = 78.0$\degree$) for each are nearly identical between the two years. \end{abstract}

astro-ph.SR↗

arXiv2015

Robust high-contrast companion detection from interferometric observations. The CANDID algorithm and an application to six binary Cepheids

Long-baseline interferometry is an important technique to spatially resolve binary or multiple systems in close orbits. By combining several telescopes together and spectrally dispersing the light, it is possible to detect faint components around bright stars. Aims. We provide a rigorous and detailed method to search for high-contrast companions around stars, determine the detection level, and estimate the dynamic range from interferometric observations. We developed the code CANDID (Companion Analysis and Non-Detection in Interferometric Data), a set of Python tools that allows us to search systematically for point-source, high-contrast companions and estimate the detection limit. The search pro- cedure is made on a N x N grid of fit, whose minimum needed resolution is estimated a posteriori. It includes a tool to estimate the detection level of the companion in the number of sigmas. The code CANDID also incorporates a robust method to set a 3σ detection limit on the flux ratio, which is based on an analytical injection of a fake companion at each point in the grid. We used CANDID to search for the companions around the binary Cepheids V1334 Cyg, AX Cir, RT Aur, AW Per, SU Cas, and T Vul. First, we showed that our previous discoveries of the components orbiting V1334 Cyg and AX Cir were detected at > 13 sigmas. The companion around AW Per is detected at more than 15 sigmas with a flux ratio of f = 1.22 +/- 0.30 %. We made a possible detection of the companion orbiting RT Aur with f = 0.22 +/- 0.11 %. It was detected at 3.8σ using the closure phases only, and so more observations are needed to confirm the detection. We also set the detection limit for possible undetected companions. We found that there is no companion with a spectral type earlier than B7V, A5V, F0V, B9V, A0V, and B9V orbiting V1334 Cyg, AX Cir, RT Aur, AW Per, SU Cas, and T Vul, respectively.

astro-ph.SR↗

arXiv2015

Spectral and spatial imaging of the Be+sdO binary phi Persei

The rapidly rotating Be star phi Persei was spun up by mass and angular momentum transfer from a now stripped-down, hot subdwarf companion. Here we present the first high angular resolution images of phi Persei made possible by new capabilities in longbaseline interferometry at near-IR and visible wavelengths. We observed phi Persei with the MIRC and VEGA instruments of the CHARA Array. Additional MIRC-only observations were performed to track the orbital motion of the companion, and these were fit together with new and existing radial velocity measurements of both stars to derive the complete orbital elements and distance. The hot subdwarf companion is clearly detected in the near-IR data at each epoch of observation with a flux contribution of 1.5% in the H band, and restricted fits indicate that its flux contribution rises to 3.3% in the visible. A new binary orbital solution is determined by combining the astrometric and radial velocity measurements. The derived stellar masses are 9.6+-0.3Msol and 1.2+-0.2Msol for the Be primary and subdwarf secondary, respectively. The inferred distance (186 +- 3 pc), kinematical properties, and evolutionary state are consistent with membership of phi Persei in the alpha Per cluster. From the cluster age we deduce significant constraints on the initial masses and evolutionary mass transfer processes that transformed the phi Persei binary system. The interferometric data place strong constraints on the Be disk elongation, orientation, and kinematics, and the disk angular momentum vector is coaligned with and has the same sense of rotation as the orbital angular momentum vector. The VEGA visible continuum data indicate an elongated shape for the Be star itself, due to the combined effects of rapid rotation, partial obscuration of the photosphere by the circumstellar disk, and flux from the bright inner disk.

astro-ph.SR↗

arXiv2014

Benchmark stars for Gaia: fundamental properties of the Population II star HD140283 from interferometric, spectroscopic and photometric data

We determined the fundamental properties of HD 140283 by obtaining new interferometric and spectroscopic measurements and combining them with photometry from the literature. The interferometric measurements were obtained using the visible interferometer VEGA on the CHARA array and we determined a 1D limb-darkened angular diameter of 0.353 +/- 0.013 milliarcseconds. Using photometry from the literature we derived the bolometric flux with two solutions: a zero-reddening one of Fbol = 3.890 +/- 0.066 1E-8 erg/s/cm2 and a solution with a maximum of Av = 0.1 mag, Fbol= 4.220 +/- 0.067 1E-8 erg/s/cm2. The interferometric Teff is thus 5534 +/- 103 K or 5647 +/- 105 K and its radius is R = 2.21 +/- 0.08 Rsol. Spectroscopic measurements of HD140283 were obtained using HARPS, NARVAL, and UVES and a 1D LTE analysis of H-alpha line wings yields Teff(Halpha) = 5626 +/- 75 K. Using fine-tuned stellar models including diffusion of elements we then determined the mass M and age t of HD140283. Once the metallicity has been fixed, the age of the star depends on M, initial helium abundance Yi and mixing-length parameter alpha, only two of which are independent. We need to adjust alpha to much lower values than the solar one (~2) in order to fit the observations, and if Av = 0.0 mag then 0.5 < alpha < 1. We give an equation to estimate t from M, Yi (alpha) and Av. Establishing a reference alpha = 1.00 and adopting Yi = 0.245 we derive a mass and age of HD140283: M = 0.780 +/- 0.010 Msol and t = 13.7 +/- 0.7 Gyr (Av = 0.0) or M = 0.805 +/- 0.010 Msol and t = 12.2 +/- 0.6 Gyr (Av=0.1 mag). Our stellar models yield an initial metallicity of [Z/X]i = -1.70 and logg = 3.65 +/- 0.03. Asteroseismic observations are critical for overcoming limitations in our results.

astro-ph.SR↗

arXiv2014

Rossby wave instability does not require sharp resistivity gradients

Rossby wave instability (RWI) at dead zone boundaries may play an important role in planet formation. Viscous hydrodynamics results suggest RWI is excited only when the viscosity changes over a radial distance less than two density scale heights. However in the disks around Solar-mass T Tauri stars, it is not viscosity but magnetic forces that provide the accretion stress beyond about 10 AU, where surface densities are low enough so stellar X-rays and interstellar cosmic rays can penetrate. Here we aim to explore the conditions for RWI in the smooth transition with increasing distance, from resistive and magnetically-dead to conducting and magnetically-active. We perform 3D unstratified MHD simulations with the Pencil Code, using static resistivity profiles. As a result, we find that in MHD, contrary to viscous models, the RWI is triggered even with a gradual change in resistivity extending from 10 to 40 AU (i.e., spanning 15 scale heights for aspect ratio 0.1). This is because magneto-rotational turbulence sets in abruptly when the resistivity reaches a threshold level. At higher resistivities the longest unstable wavelength is quenched, resulting in a sharp decline of the Maxwell stress towards the star. The sharp gradient in the magnetic forces leads to a localized density bump, that is in turn Rossby wave unstable. We conclude that even weak gradients in the resistivity can lead to sharp transitions in the Maxwell stress. The upshot is that the RWI is more easily activated in the outer disk than previously thought. Rossby vortices at the outer dead zone boundary thus could underlie the dust asymmetries seen in the outer reaches of transition disks.

astro-ph.EP↗

arXiv2014

Improving the surface brightness-color relation for early-type stars using optical interferometry

The aim of this work is to improve the SBC relation for early-type stars in the $-1 \leq V-K \leq 0$ color domain, using optical interferometry. Observations of eight B- and A-type stars were secured with the VEGA/CHARA instrument in the visible. The derived uniform disk angular diameters were converted into limb darkened angular diameters and included in a larger sample of 24 stars, already observed by interferometry, in order to derive a revised empirical relation for O, B, A spectral type stars with a V-K color index ranging from -1 to 0. We also took the opportunity to check the consistency of the SBC relation up to $V-K \simeq 4$ using 100 additional measurements. We determined the uniform disk angular diameter for the eight following stars: $γ$ Ori, $ζ$ Per, $8$ Cyg, $ι$ Her, $λ$ Aql, $ζ$ Peg, $γ$ Lyr, and $δ$ Cyg with V-K color ranging from -0.70 to 0.02 and typical precision of about $1.5\%$. Using our total sample of 132 stars with $V-K$ colors index ranging from about $-1$ to $4$, we provide a revised SBC relation. For late-type stars ($0 \leq V-K \leq 4$), the results are consistent with previous studies. For early-type stars ($-1 \leq V-K \leq 0$), our new VEGA/CHARA measurements combined with a careful selection of the stars (rejecting stars with environment or stars with a strong variability), allows us to reach an unprecedented precision of about 0.16 magnitude or $\simeq 7\%$ in terms of angular diameter.

astro-ph.SR↗

arXiv2014

Young Stellar Object Variability (YSOVAR): Long Timescale Variations in the Mid-Infrared

The YSOVAR (Young Stellar Object VARiability) Spitzer Space Telescope observing program obtained the first extensive mid-infrared (3.6 & 4.5 um) time-series photometry of the Orion Nebula Cluster plus smaller footprints in eleven other star-forming cores (AFGL490, NGC1333, MonR2, GGD 12-15, NGC2264, L1688, Serpens Main, Serpens South, IRAS 20050+2720, IC1396A, and Ceph C). There are ~29,000 unique objects with light curves in either or both IRAC channels in the YSOVAR data set. We present the data collection and reduction for the Spitzer and ancillary data, and define the "standard sample" on which we calculate statistics, consisting of fast cadence data, with epochs about twice per day for ~40d. We also define a "standard sample of members", consisting of all the IR-selected members and X-ray selected members. We characterize the standard sample in terms of other properties, such as spectral energy distribution shape. We use three mechanisms to identify variables in the fast cadence data--the Stetson index, a chi^2 fit to a flat light curve, and significant periodicity. We also identified variables on the longest timescales possible of ~6 years, by comparing measurements taken early in the Spitzer mission with the mean from our YSOVAR campaign. The fraction of members in each cluster that are variable on these longest timescales is a function of the ratio of Class I/total members in each cluster, such that clusters with a higher fraction of Class I objects also have a higher fraction of long-term variables. For objects with a YSOVAR-determined period and a [3.6]-[8] color, we find that a star with a longer period is more likely than those with shorter periods to have an IR excess. We do not find any evidence for variability that causes [3.6]-[4.5] excesses to appear or vanish within our data; out of members and field objects combined, at most 0.02% may have transient IR excesses.

astro-ph.SR↗

arXiv2014

Multiplicity of Galactic Cepheids from long-baseline interferometry I. CHARA/MIRC detection of the companion of V1334 Cygni

We aim at determining the masses of Cepheids in binary systems, as well as their geometric distances and the flux contribution of the companions. The combination of interferometry with spectroscopy will offer a unique and independent estimate of the Cepheid masses. Using long-baseline interferometry at visible and infrared wavelengths, it is possible to spatially resolve binary systems containing a Cepheid down to milliarcsecond separations. Based on the resulting visual orbit and radial velocities, we can then derive the fundamental parameters of these systems, particularly the masses of the components and the geometric distance. We therefore performed interferometric observations of the first-overtone mode Cepheid V1334 Cyg with the CHARA/MIRC combiner. We report the first detection of a Cepheid companion using long-baseline interferometry. We detect the signature of a companion orbiting V1334 Cyg at two epochs. We measure a flux ratio between the companion and the Cepheid f = 3.10+/-0.08%, giving an apparent magnitude mH = 8.47+/-0.15mag. The combination of interferometric and spectroscopic data have enabled the unique determination of the orbital elements: P = 1938.6+/-1.2 days, Tp = 2 443 616.1+/-7.3, a = 8.54+/-0.51mas, i = 124.7+/-1.8°, e = 0.190+/-0.013, ω = 228.7+/-1.6°, and Ω = 206.3+/-9.4°. We derive a minimal distance d ~ 691 pc, a minimum mass for both stars of 3.6 Msol, with a spectral type earlier than B5.5V for the companion star. Our measured flux ratio suggests that radial velocity detection of the companion using spectroscopy is within reach, and would provide an orbital parallax and model-free masses.

astro-ph.SR↗

arXiv2014

CHARA/MIRC observations of two M supergiants in Perseus OB1: temperature, Bayesian modeling, and compressed sensing imaging

Two red supergiants of the Per OB1 association, RS Per and T Per, have been observed in H band using the MIRC instrument at the CHARA array. The data show clear evidence of departure from circular symmetry. We present here new techniques specially developed to analyze such cases, based on state-of-the-art statistical frameworks. The stellar surfaces are first modeled as limb-darkened discs based on SATLAS models that fit both MIRC interferometric data and publicly available spectrophotometric data. Bayesian model selection is then used to determine the most probable number of spots. The effective surface temperatures are also determined and give further support to the recently derived hotter temperature scales of red su- pergiants. The stellar surfaces are reconstructed by our model-independent imaging code SQUEEZE, making use of its novel regularizer based on Compressed Sensing theory. We find excellent agreement between the model-selection results and the reconstructions. Our results provide evidence for the presence of near-infrared spots representing about 3-5% of the stellar flux.

astro-ph.SR↗

arXiv2013

The fundamental parameters of the roAp star 10 Aql

Due to the strong magnetic field and related abnormal surface layers existing in rapidly oscillating Ap stars, systematic errors are likely to be present when determining their effective temperatures, which potentially compromises asteroseismic studies of these pulsators. Using long-baseline interferometry, our goal is to determine accurate angular diameters of a number of roAp targets to provide a temperature calibration for these stars. We obtained interferometric observations of 10 Aql with the visible spectrograph VEGA at the CHARA array. We determined a limb-darkened angular diameter of 0.275+/-0.009 mas and deduced a linear radius of 2.32+/-0.09 R_sun. We estimated the star's bolometric flux and used it, in combination with its parallax and angular diameter, to determine the star's luminosity and effective temperature. For two data sets of bolometric flux we derived an effective temperature of 7800+/-170 K and a luminosity of 18+/-1 L_sun or of 8000+/-210 K and 19+/-2 L_sun. We used these fundamental parameters together with the large frequency separation to constrain the mass and the age of 10 Aql, using the CESAM stellar evolution code. Assuming a solar chemical composition and ignoring all kinds of diffusion and settling of elements, we obtained a mass of 1.92 M_sun and an age of 780 Gy or a mass of 1.95 M_sun and an age of 740 Gy, depending on the considered bolometric flux. For the first time, we managed to determine an accurate angular diameter for a star smaller than 0.3 mas and to derive its fundamental parameters. In particular, by only combining our interferometric data and the bolometric flux, we derived an effective temperature that can be compared to those derived from atmosphere models. Such fundamental parameters can help for testing the mechanism responsible for the excitation of the oscillations observed in the magnetic pulsating stars.

astro-ph.SR↗