arXiv subjects

N. Ya. Sotnikova

Publications and source records attributed to N. Ya. Sotnikova.

At least 19 recordsLinked to original sources

arXiv2017

Measuring the X-shaped structures in edge-on galaxies

We present a detailed photometric study of a sample of 22 edge-on galaxies with clearly visible X-shaped structures. We propose a novel method to derive geometrical parameters of these features, along with the parameters of their host galaxies based on the multi-component photometric decomposition of galactic images. To include the X-shaped structure into our photometric model, we use the IMFIT package, in which we implement a new component describing the X-shaped structure. This method is applied for a sample of galaxies with available SDSS and Spitzer IRAC 3.6 $μ$m observations. In order to explain our results, we perform realistic $N$-body simulations of a Milky Way-type galaxy and compare the observed and the model X-shaped structures. Our main conclusions are as follows: (1) galaxies with strong X-shaped structures reside in approximately the same local environments as field galaxies; (2) the characteristic size of the X-shaped structures is about 2/3 of the bar size; (3) there is a correlation between the X-shaped structure size and its observed flatness: the larger structures are more flattened; (4) our $N$-body simulations qualitatively confirm the observational results and support the bar-driven scenario for the X-shaped structure formation.

astro-ph.GA↗

arXiv2016

Very Thin Disc Galaxies in The SDSS Catalog of Edge-on Galaxies

We study the properties of galaxies with very thin discs using a sample of 85 objects whose stellar disc radial-to-vertical scale ratio determined from photometric decomposition, exceeds nine. We present evidences of similarities between the very thin disc galaxies (VTD galaxies) and low surface brightness (LSB) disc galaxies, and conclude that both small and giant LSB galaxies may reveal themselves as VTD, edge-on galaxies. Our VTD galaxies are mostly bulgeless, and those with large radial scale length tend to have redder colors. We performed spectral observations of 22 VTD galaxies with the Dual Imaging Spectrograph on the 3.5m telescope at the Apache Point Observatory. The spectra with good resolution (R ~ 5000) allow us to determine the distance and the ionized gas rotation curve maximum for the galaxies. Our VTD galaxies have low dust content, in contrast to regular disc galaxies. Apparently, VTD galaxies reside in specific cosmological low-density environments and tend to have less connection with filaments. Comparing a toy model that assumes marginally low star formation in galactic discs with obtained gas kinematics data, we conclude that there is a threshold central surface density of about 88 Mo/pc**2, which we observe in the case of very thin, rotationally supported galactic discs.

astro-ph.GA↗

arXiv2015

Polar-bulge galaxies

Based on SDSS data, we have selected a sample of nine edge-on spiral galaxies with bulges whose major axes show a high inclination to the disk plane. Such objects are called polar-bulge galaxies. They are similar in their morphology to polar-ring galaxies, but the central objects in them have small size and low luminosity. We have performed a photometric analysis of the galaxies in the g and r bands and determined the main characteristics of their bulges and disks. We show that the disks of such galaxies are typical for the disks of spiral galaxies of late morphological types. The integrated characteristics of their bulges are similar to the parameters of normal bulges. The stellar disks of polar-bulge galaxies often show large-scale warps, which can be explained by their interaction with neighboring galaxies or external accretion from outside.

astro-ph.GA↗

arXiv2015

Does the stellar disc flattening depend on the galaxy type?

We analyze the dependence of the stellar disc flatness on the galaxy morphological type using 2D decomposition of galaxies from the reliable subsample of the Edge-on Galaxies in SDSS (EGIS) catalogue. Combining these data with the retrieved models of the edge-on galaxies from the Two Micron All Sky Survey (2MASS) and the Spitzer Survey of Stellar Structure in Galaxies (S$^4$G) catalogue, we make the following conclusions: (1) The disc relative thickness $z_0/h$ in the near- and mid-infrared passbands correlates weakly with morphological type and does not correlate with the bulge-to-total luminosity ratio $B/T$ in all studied bands. (2) Applying an 1D photometric profile analysis overestimates the disc thickness in galaxies with large bulges making an illusion of the relationship between the disc flattening and the ratio $B/T$. (3) In our sample the early-type disc galaxies (S0/a) have both flat and "puffed" discs. The early spirals and intermediate-type galaxies have a large scatter of the disc flatness, which can be caused by the presence of a bar: barred galaxies have thicker stellar discs, on average. On the other hand, the late-type spirals are mostly thin galaxies, whereas irregular galaxies have puffed stellar discs.

astro-ph.GA↗

arXiv2014

The Catalog of Edge-on Disk Galaxies from SDSS. Part I: the catalog and the Structural Parameters of Stellar Disks

We present a catalog of true edge-on disk galaxies automatically selected from the Seventh Data Release (DR7) of the Sloan Digital Sky Survey. A visual inspection of the $g$, $r$ and $i$ images of about 15000 galaxies allowed us to split the initial sample of edge-on galaxy candidates into 4768 (31.8% of the initial sample) genuine edge-on galaxies, 8350 (55.7%) non-edge-ons, and 1865 (12.5%) edge-on galaxies not suitable for simple automatic analysis because these objects show signs of interaction, warps, or nearby bright stars project on it. We added more candidate galaxies from RFGC, EFIGI, RC3, and Galaxy Zoo catalogs found in the SDSS footprints. Our final sample consists of 5747 genuine edge-on galaxies. We estimate the structural parameters of the stellar disks (the stellar disk thickness, radial scale length, and central surface brightness) in the galaxies by analyzing photometric profiles in each of the g, r, and i images. We also perform simplified 3-D modeling of the light distribution in the stellar disks of edge-on galaxies from our sample. Our large sample is intended to be used for studying scaling relations in the stellar disks and bulges and for estimating parameters of the thick disks in different types of galaxies via the image stacking. In this paper we present the sample selection procedure and general description of the sample.

astro-ph.GA↗

arXiv2014

Mirages in galaxy scaling relations

We analyzed several basic correlations between structural parameters of galaxies. The data were taken from various samples in different passbands which are available in the literature. We discuss disc scaling relations as well as some debatable issues concerning the so-called Photometric Plane for bulges and elliptical galaxies in different forms and various versions of the famous Kormendy relation. We show that some of the correlations under discussion are artificial (self-correlations), while others truly reveal some new essential details of the structural properties of galaxies. Our main results are as follows: (1) At present, we can not conclude that faint stellar discs are, on average, more thin than discs in high surface brightness galaxies. The ``central surface brightness -- thickness'' correlation appears only as a consequence of the transparent exponential disc model to describe real galaxy discs. (2) The Photometric Plane appears to have no independent physical sense. Various forms of this plane are merely sophisticated versions of the Kormendy relation or of the self-relation involving the central surface brightness of a bulge/elliptical galaxy and the Sersic index n. (3) The Kormendy relation is a physical correlation presumably reflecting the difference in the origin of bright and faint ellipticals and bulges. We present arguments that involve creating artificial samples to prove our main idea.

astro-ph.GA↗

arXiv2013

Bending instability in galactic discs. Advocacy of the linear theory

We demonstrate that in N-body simulations of isolated disc galaxies there is numerical vertical heating which slowly increases the vertical velocity dispersion and the disc thickness. Even for models with over a million particles in a disc, this heating can be significant. Such an effect is just the same as in numerical experiments by Sellwood (2013). We also show that in a stellar disc, outside a boxy/peanut bulge, if it presents, the saturation level of the bending instability is rather close to the value predicted by the linear theory. We pay attention to the fact that the bending instability develops and decays very fast, so it couldn't play any role in secular vertical heating. However the bending instability defines the minimal value of the ratio between the vertical and radial velocity dispersions $σ_z / σ_R \approx 0.3$ (so indirectly the minimal thickness) which could have stellar discs in real galaxies. We demonstrate that observations confirm last statement.

astro-ph.CO↗

arXiv2011

Modulation of Circumstellar Extinction in a Young Binary System with a Low-Mass Companion in a Noncoplanar Orbit

The cyclic activity model of a young star with the low-mass secondary component (q = M2/M1 <= 0.1) accreting a matter from circumbinary disk is considered. It is assumed that the orbit is circular and the disk and orbital planes are non-coplanar. Sets of hydrodynamics models of such a system have been calculated by the SPH method and then the variations of the circumstellar extinction and phase light curves were determined. The calculations showed that depending on the model parameters and orientation of the system in regards to an observer the different in shape and amplitude light curves can be observed. An important property of the considered models is also the dependence of the mass accretion rate onto the components on the phase of the orbital period. The results of the calculation can be used for analysis of the cyclic activity of UX Ori stars and young stars with the long-lasting eclipses.

astro-ph.SR↗

arXiv2011

On the characteristics of tidal structures of interacting galaxies

We present the results of our analysis of the geometrical tidal tail characteristics for nearby and distant interacting galaxies. The sample includes more than two hundred nearby galaxies and about seven hundred distant ones. The distant galaxies have been selected in several deep fields of the Hubble Space Telescope (HDF-N, HDF-S, HUDF, GOODS, GEMS) and they are at mean redshift z=0.65. We analyze the distributions of lengths and thicknesses for the tidal structures and show that the tails in distant galaxies are shorter than those in nearby ones. This effect can be partly attributed to observational selection effects, but, on the other hand, it may result from the general evolution of the sizes of spiral galaxies wih z. The location of interacting galaxies on the galaxy luminosity ($L$) -- tidal tail length ($l$) plane are shown to be explained by a simple geometrical model, with the upper envelope of the observed distribution being $l \propto \sqrt{L}$. We have solved the problem on the relationship between the observed distribution of tail flattening and the tail length in angular measure by assuming the tidal tails to be arcs of circumferences visible at arbitrary angles to the line of sight. We conclude that the angular length of the tidal tails visually distinguished in nearby and distant galaxies, on average, exceeds 180 degrees.

astro-ph.CO↗

arXiv2010

Bulges and discs of spiral galaxies: edge-on perspective

We present a sample of edge-on spiral galaxies both of early and late types.The sample consists of 175 galaxies in the Ks-filter, 169 galaxies in the H-filter and 165 galaxies in the J-filter. Bulge and disc decompositions of each galaxy image, taken from the Two Micron All Sky Survey (2MASS), were performed. We discuss several scaling relations for bulges and discs which indicate a tight link between their formation and evolution. We show that galaxies with bulges fitted by the Sersic index n<2 (pseudobulges) have quite different distributions of their structural parameters than galaxies with n>=2 bulges (classical bulges). First of all, the distribution of the apparent bulge axis ratio q_b for the subsample with n<2 can be attributed to triaxial, nearly prolate bulges, while n>=2 bulges seem to be oblate spheroids with moderate flattening. Secondly, the Photometric Plane of the sample bulges is not flat and has a prominent curvature towards small values of n. Thirdly, despite of the existence of a clear relation between the flattening of stellar discs h/z_0 and the relative mass of a spherical component, the distributions over both parameters are quite different for galaxies possesing bulges and pseudobulges.

astro-ph.CO↗

arXiv2010

Malin 1: interacting galaxy pair?

Malin 1 is a unique, extraordinarily large low surface brightness galaxy. The structure and the origins of the galaxy are poorly understood. The reason for such a situation is an absence of detailed observational data, especially, of high-resolution kinematics. In this Letter we study the stellar kinematics of the inner part (r < 15 kpc) of Malin 1. We present spectroscopic arguments in favour of a small galaxy - Malin 1B - being a companion probably interacting with the main galaxy - Malin 1. This object is clearly seen in many published images of Malin 1 but is not mentioned in any astronomical databases. Malin 1B is located at the projected distance of 14 kpc from the Malin 1's nucleus and has small - 65$\pm$16 km/s - relative velocity, which we determined for the first time. We suggest that ongoing interaction with Malin 1B can explain main morphological features of the Malin 1's central region - two-armed spiral structure, a bar, and an external one-armed spiral pattern. We also investigated the large scale environment of Malin 1 and postulate that the galaxy SDSS J123708.91+142253.2 might be responsible for the formation of extended low-surface brightness envelope by means of head-on collision with Malin 1 (in the framework of collision scenario proposed by Mapelli et al. 2008). To test the collisional origins of Malin 1 global structure, more observational data and new numerical models are needed.

astro-ph.CO↗

arXiv2009

2MASS photometry of edge-on spiral galaxies. I. Sample and general results

A sample of edge-on spiral galaxies aimed at a study of the main structural and photometric parameters of edge-on galaxies both of early and late types is presented. The data were taken from the 2MASS in the J, H and K_s filters. The sample consists of 175 galaxies in the K_s-filter, 169 galaxies in the H-filter and 165 galaxies in the J-filter. We present bulge and disc decompositions of each galaxy image. All galaxies have been modelled with a Sersic bulge and exponential disc with the BUDDA v2.1 package. The main conclusions of our general statistical analysis of the sample are: (1) The distribution of the apparent bulge axis ratio q_b for the subsample with n < 2 can be attributed to triaxial, nearly prolate bulges that are seen from different projections, while n > 2 bulges seem to be oblate spheroids with moderate flattening. (2) For the sample galaxies, the effective radius of the bulge r_{e,b}, the disc scalelength h and the disc scaleheight z_0 are well correlated. However, there is a clear trend for the ratio r_{e,b}/h to increase with n. (3) There is a hint that the fundamental planes of discs, which links only disc parameters and the maximum rotational velocity of gas, are different for galaxies with different bulges. (4) The investigation of the Photometric Plane of sample bulges shows that the plane is not flat and has a prominent curvature towards small values of n. For bulges this fact was not noticed earlier. (5) The clear relation between the flattening of stellar discs h/z_0 and the relative mass of a spherical component, including a dark halo, is confirmed not for bulgeless galaxies but for galaxies with massive bulges. (Abridged)

astro-ph.CO↗

arXiv2008

Hydrodynamic Processes in Young Binary Systems as a Source of Cyclic Variations of Circumstellar Extinction

Hydrodynamic models of a young binary system accreting matter from the remnants of a protostellar cloud have been calculated by the SPH method. It is shown that periodic variations in column density in projection onto the primary component take place at low inclinations of the binary plane to the line of sight. They can result in periodic extinction variations. Three periodic components can exist in general case. The first component has a period equal to the orbital one and is attributable to the streams of matter penetrating into the inner regions of the binary. The second component has a period that is a factor of 5-8 longer than the orbital one and is related to the density waves generated in a circumbinary (CB) disk. The third, longest period is attributable to the precession of the inner asymmetric region of CB disk. The relationship between the amplitudes of these cycles depends on the model parameters as well as on the inclination and orientation of the binary in space. We show that at a dust-to-gas ratio of 1:100 and and a mass extinction coefficient of 250 cm$^2$ g$^{-1}$, the amplitude of the brightness variations of the primary component in the V-band can reach $1^m$ at a mass accretion rate onto the binary components of $10^{-8} M_{\odot}$ yr$^{-1}$ and a $10^{\rm o}$ inclination of the binary plane to the line of sight. We discuss possible applications of the model to pre-main-sequence stars.

astro-ph↗

arXiv2008

Anisotropic Models of Dark Halos

An iterative approach is used to construct spherically symmetric equilibrium models with an anisotropic velocity distribution. The potentialities of the method have been tested on models with known distribution functions, the Osipkov-Merritt models. It is shown that models that differ significantly from the Osipkov-Merritt models can be constructed. An N-body model of a dark halo with a density distribution that approximates the results of cosmological simulations (the Navarro--Frenk--White model) has been constructed. The anisotropy profile has been taken to be similar to that yielded by cosmological simulations. The constructed models can serve as direct input data for investigating the dynamics and stability of such systems in N-body simulations.

astro-ph↗

arXiv2006

An Iterative Method for the Construction of Equilibrium N-Body Models for Stellar Disks

One widely used technique for the construction of equilibrium models of stellar disks is based on the Jeans equations and the moments of velocity distribution functions derived using these equations. Stellar disks constructed using this technique are shown to be "not entirely" in equilibrium. Our attempt to abandon the epicyclic approximation and the approximation of infinite isothermal layers, which are commonly adopted in this technique, failed to improve the situation substantially. We conclude that the main drawback of techniques based on the Jeans equations is that the system of equations employed is not closed, and therefore requires adopting an essentially ad hoc additional closure condition. A new iterative approach to constructing equilibrium N-body models with a given density distribution is proposed. The main idea behind this approach is that a model is first constructed using some approximation method, and is then allowed to adjust to an equilibrium state with the specified density and the required parameters of the velocity distribution remaining fixed in the process. This iterative approach was used to construct isotropic, spherically symmetric models and models of stellar disks embedded in an external potential. The numerical models constructed prove to be close to equilibrium. It is shown that the commonly adopted assumption that the profile of the radial velocity dispersion is exponential may be wrong. The technique proposed can be applied to a wide range of problems involving the construction of models of stellar systems with various geometries.

astro-ph↗

arXiv2006

Estimating the Dark Halo Mass from the Relative Thickness of Stellar Disks

We analyze the relationship between the mass of a spherical component and the minimum possible thickness of stable stellar disks. This relationship for real galaxies allows the lower limit on the dark halo mass to be estimated (the thinner the stable stellar disk is, the more massive the dark halo must be). In our analysis, we use both theoretical relations and numerical N-body simulations of the dynamical evolution of thin disks in the presence of spherical components with different density profiles and different masses. We conclude that the theoretical relationship between the thickness of disk galaxies and the mass of their spherical components is a lower envelope for the model data points. We recommend using this theoretical relationship to estimate the lower limit for the dark halo mass in galaxies. The estimate obtained turns out to be weak. Even for the thinnest galaxies, the dark halo mass within four exponential disk scale lengths must be more than one stellar disk mass.

astro-ph↗

arXiv2005

Optimal Choice of the Softening Length and Time-Step in N-body Simulations

A criterion for the choice of optimal softening length $ε$ and time-step $dt$ for $N$-body simulations of a collisionless stellar system is analyzed. Plummer and Hernquist spheres are used as models to follow how changes in various parameters of an initially equilibrium stable model depend on $ε$ and $dt$. These dependences are used to derive a criterion for choosing $ε$ and $dt$. The resulting criterion is compared to Merritt's criterion for choosing the softening length, which is based on minimizing the mean irregular force acting on a particle with unit mass. Our criterion for choosing $ε$ and $dt$ indicate that $ε$ must be a factor of 1.5-2 smaller than the mean distance between particles in the densest regions to be resolved. The time-step must always be adjusted to the chosen $ε$ (the particle must, on average, travel a distance smaller than $0.5ε$ during one time-step). An algorithm for solving N-body problems with adaptive variations of the softening length is discussed in connection with the task of choosing $ε$, but is found not to be promising.

astro-ph↗

arXiv2004

Bending Instability of Stellar Disks: The Stabilizing Effect of a Compact Bulge

The saturation conditions for bending modes in inhomogeneous thin stellar disks that follow from an analysis of the dispersion relation are compared with those derived from $N$-body simulations. In the central regions of inhomogeneous disks, the reserve of disk strength against the growth of bending instability is smaller than that for a homogeneous layer. The spheroidal component (a dark halo, a bulge) is shown to have a stabilizing effect. The latter turns out to depend not only on the total mass of the spherical component, but also on the degree of mass concentration toward the center. We conclude that the presence of a compact (not necessarily massive) bulge in spiral galaxies may prove to be enough to suppress the bending perturbations that increase the disk thickness. This conclusion is corroborated by our $N$-body simulations in which we simulated the evolution of almost equilibrium, but unstable finite-thickness disks in the presence of spheroidal components. The final disk thickness at the same total mass of the spherical component (dark halo + bulge) has been found to be much smaller than that in the simulations where a concentrated bulge is present.

astro-ph↗