arXiv subjects

N. Zimmermann

Publications and source records attributed to N. Zimmermann.

8 recordsLinked to original sources

arXiv2026

Optimization studies of silicon remoTES cryogenic calorimeters

The remoTES design, developed within the COSINUS experiment, enables a broader range of materials to be operated as cryogenic calorimeters read out with Transition Edge Sensors (TESs). In this configuration, the TES is fabricated onto a separate chip and thermally coupled to the absorber via a gold (Au) link. The remoTES concept has been successfully tested on various target materials. To further enhance detector performance and to fully exploit the advantages of the remote coupling design a series of optimization studies has been conducted using silicon (Si) absorbers as benchmark. This work presents an evaluation of several measurements aimed at reducing the thermal boundary resistance and enhancing signal transmission across Si remoTES interfaces, specifically from the absorber to the phonon collector and from the phonon collector to the TES. By testing a new Au link design and three distinct phonon collector configurations, Au, copper, and aluminum (Al)/Au, we achieved a baseline resolution of (21.5 +/- 0.3)eV using the Al/Au phonon collector.

physics.ins-det↗

arXiv2026

Euclid preparation. Refining input galaxy shape distributions for shear calibration simulations

The Euclid Wide Survey (EWS) will cover the majority of the extragalactic sky with a resolution similar to the Hubble Space Telescope. This unprecedented data set will introduce a new era of precision cosmology. However, systematic effects need to be controlled better than ever. One of the sources of systematic uncertainties in weak gravitational lensing are biases introduced during the shear measurement. Determining these biases precisely allows the calibration of cosmological measurements to within Euclid's required accuracy. The simulations that are used to determine such biases, need to resemble the real observations. In this work, we aim to learn distributions of galaxy shape parameters from real Euclid data and use the new information to augment the morphological information in the Flagship galaxy mock catalogue. The morphology is extracted using single and double-S\'ersic model fits to the real data, for which we use SourceXtractor++. We train our pipeline on deep Euclid observations of a field with rich auxiliary data and then use it to simulate EWS-like data. In these simulations we compare the multiplicative bias between the morphology from the Flagship catalogue, the trained single-S\'ersic morphology, and the trained double-S\'ersic morphology. We find that the image simulations with the updated morphology result in a percent-level change in the multiplicative shear bias compared to the original morphology from Flagship. This bias exceeds Euclid's tight error budget by a factor of five and underlines the need for this work. Furthermore, we study the sensitivity of the multiplicative bias to key morphological parameters and show that our approach satisfies the requirements for the cosmology analysis with the first data release of Euclid.

astro-ph.CO↗

arXiv2026

Cosmic Ray Boosted Dark Matter in COSINUS: Modeling and Constraints

Direct detection of nuclear recoils due to sub-GeV dark matter is challenging because of the small kinetic energy of the light dark matter particles. Although limits down to a few hundred MeV have been reached using specially designed low threshold detectors, further improvements are now constrained more by background event rates than by energy thresholds. However, constraints down to sub-MeV dark matter masses can still be obtained through the boosted dark matter framework. In this scenario, high-energy cosmic rays or neutrinos scatter off dark matter particles, imparting additional kinetic energy and boosting them beyond the typical velocities expected from the non-relativistic dark matter halo. These boosted dark matter particles can then be detected even by experiments with higher energy thresholds. In this work, we present a catalog of dark matter - nucleon scattering cross sections corresponding to a heavy mediator limit for spin zero, one half and one dark matter and for scalar and vector mediators with even or odd parity. Based on these results, we present projected constraints on the dark matter - nucleon cross section for the COSINUS experiment, assuming an exposure of 100 kg d, demonstrating the potential sensitivity to sub-GeV boosted dark matter.

hep-ph↗

arXiv2025

Defect Formation in NaI Crystals: A Novel Pathway to Dark Matter Detection

Sodium iodide (NaI) is a widely used scintillator in direct dark matter searches. In particular, NaI-based cryogenic scintillating calorimeters have emerged as promising candidates, like in the COSINUS experiment, for testing the annually modulating signal reported by DAMA/LIBRA. In this study, we investigate defect formation within NaI crystals and its impact on the dark matter detection signal. Using molecular dynamics simulations and density functional theory techniques, we simulate a DM particle collision on an NaI crystal, focusing on the possible defects formation and their structural and electronic properties. Our analysis includes a detailed study of the electronic states associated with the interstitial atoms and vacancies, the energetic cost of defect formation, and the anisotropic threshold displacement energy. Finally, we highlight the potential to exploit dark matter-induced defects as a novel detection channel, enabled by the introduction of new states within the electronic band gap.

hep-ph↗

arXiv2025

The SRG/eROSITA All-Sky Survey $J$-Band Follow-Up Observations for Selected High-Redshift Galaxy Cluster Candidates

We select galaxy cluster candidates from the high-redshift (BEST_Z > 0.9) end of the first SRG/eROSITA All-Sky Survey (eRASS1) galaxy cluster catalogue, for which we obtain moderately deep J-band imaging data with the OMEGA2000 camera at the 3.5m telescope of the Calar Alto Observatory. We include J-band data of four additional targets obtained with the three-channel camera at the 2m Fraunhofer telescope at the Wendelstein Observatory. We complement the new J-band photometric catalogue with forced photometry in the i- and z-bands of the tenth data release of the Legacy Survey (LSDR10) to derive the radial colour distribution around the eRASS1 clusters. Without assuming a priori to find a cluster red sequence at a specific colour, we try to find a radially weighted colour over-density to confirm the presence of high-redshift optical counterparts for the X-ray emission. We compare our confirmation with optical properties derived in earlier works based on LSDR10 data to refine the existing high-redshift cluster confirmation of eROSITA-selected clusters. We attempt to calibrate the colour-redshift-relation including the new J-band data by comparing our obtained photometric redshift estimate with the spectroscopic redshift of a confirmed, optically selected, high-redshift galaxy cluster. We confirm 9 out of 18 of the selected galaxy cluster candidates with a radial over-density of similar coloured galaxies for which we provide a photometric redshift estimate. We can report an increase in the relative colour measurement precision from 8% to 4% when including J-band data. In conclusion, our findings indicate a not insignificant spurious contaminant fraction at the high-redshift end (BEST_Z > 0.9) of the eROSITA/eRASS1 galaxy cluster catalogue, as well as it underlines the necessity for wide and deep near infrared imaging data for confirmation and characterisation of high-$z$ galaxy clusters.

astro-ph.CO↗

arXiv2025

COSINUS -- a model-independent challenge of the DAMA/LIBRA dark matter claim with cryogenic NaI detectors operated in a new low-background facility

Low-temperature detectors are a powerful technology for dark matter search, offering excellent energy resolution and low energy thresholds. COSINUS is the only experiment that combines scintillating sodium iodide (NaI) crystals with an additional phonon readout at cryogenic temperatures, using superconducting sensors (remoTES), alongside the conventional scintillation light signal. Via the simultaneous phonon and scintillation light detection, a unique event-by-event particle identification is enabled. This dual-channel approach allows for a model-independent cross-check of the long-standing DAMA/LIBRA signal with a moderate exposure of a few hundred kg d, while completely avoiding key systematic uncertainties inherent to scintillation-only NaI-based searches. COSINUS built and commissioned a dedicated low-background cryogenic facility at the LNGS underground laboratories. Data taking with eight NaI detector modules (COSINUS1$\pi$ Run1) is planned to begin in late 2025.

physics.ins-det↗

arXiv2009

Silicon photomultiplier arrays - a novel photon detector for a high resolution tracker produced at FBK-irst, Italy

A silicon photomultiplier (SiPM) array has been developed at FBK-irst having 32 channels and a dimension of 8.0 x 1.1 mm^2. Each 250 um wide channel is subdivided into 5 x 22 rectangularly arranged pixels. These sensors are developed to read out a modular high resolution scintillating fiber tracker. Key properties like breakdown voltage, gain and photon detection efficiency (PDE) are found to be homogeneous over all 32 channels of an SiPM array. This could make scintillating fiber trackers with SiPM array readout a promising alternative to available tracker technologies, if noise properties and the PDE are improved.

physics.ins-det↗

arXiv2008

A Scintillating Fiber Tracker With SiPM Readout

We present a prototype for the first tracking detector consisting of 250 micron thin scintillating fibers and silicon photomultiplier (SiPM) arrays. The detector has a modular design, each module consists of a mechanical support structure of 10mm Rohacell foam between two 100 micron thin carbon fiber skins. Five layers of scintillating fibers are glued to both top and bottom of the support structure. SiPM arrays with a channel pitch of 250 micron are placed in front of the fibers. We show the results of the first module prototype using multiclad fibers of types Bicron BCF-20 and Kuraray SCSF-81M that were read out by novel 32-channel SiPM arrays from FBK-irst/INFN Perugia as well as 32-channel SiPM arrays produced by Hamamatsu. A spatial resolution of 88 micron +/- 6 micron at an average yield of 10 detected photons per minimal ionizig particle has been achieved.

physics.ins-det↗