arXiv subjects

Nada Golmie

Publications and source records attributed to Nada Golmie.

11 recordsLinked to original sources

arXiv2026

Super-Resolution Experimental Validation and Polarimetric Extension of the Effective Roughness Diffuse Scattering Models

The experimental validation of diffuse scattering models has long been limited by the inability to spatially separate specular and diffuse contributions in measured channels. This paper overcomes this limitation by combining super-resolution multipath component (MPC) extraction, which resolves individual propagation paths including the specular component, with digital-twin-assisted geometry, enabling the spatial separation of specular and diffuse contributions from bistatic measurements at 28~GHz. Using this framework, we provide the first measurement-driven validation of the Effective Roughness (ER) model with independent characterization of diffuse scattering across ten common building materials, each measured over 266 angular configurations and all polarization combinations (HH, HV, VH, VV). Furthermore, we extend the ER framework by proposing a novel angle-dependent cross-polarization discrimination (XPD) model, capturing the geometry-dependent nature of depolarization that is neglected in existing approaches. The proposed method reproduces the measured diffuse power trends, achieving RMSE values as low as 3 dB across the tested materials, and improves XPD prediction over the baseline constant-XPD model for nearly all material-polarization cases. These results establish a physically consistent and practically viable approach for high-fidelity channel modeling in mmWave systems.

eess.SP↗

arXiv2026

A Computationally Efficient Reciprocal Effective Roughness Model for Diffuse Scattering

Ray-tracing (RT) has become central to site-specific electromagnetic propagation modeling in dynamic complex environments. Yet its computational burden grows sharply as high-fidelity digital twins of these environments scale to millions of facets whose material parameters must be continuously updated as the environment changes. The challenge is amplified at mmWave and sub-THz frequencies, where surface roughness becomes comparable to the wavelength and so diffuse scattering can account for up to 40% of the received power, making accurate yet tractable models essential. The popular Effective Roughness (ER) approach offers physical consistency but become increasingly costly when highly directive lobes are required or when parameters must be iteratively tuned. This communication introduces a directive, reciprocal diffuse scattering model that preserves the structure of the ER while enabling an order-of-magnitude reduction in computational cost. Validation across eight materials shows no loss in accuracy - and a slight improvement - demonstrating a scalable and physically meaningful solution for RT in scenarios where diffuse scattering is non-negligible.

eess.SP↗

arXiv2026

Multi-TRP Assisted UAV Detection in 3GPP 5G-Advanced ISAC Network

ISAC is currently being standardized within the 3GPP New Radio (NR) to enable cellular infrastructure to perform sensing using existing communication waveforms. While standardization is progressing, practical deployment may be limited by scenario-dependent observability constraints. For example, in UMa-AV scenarios, sensing with a single TRP can be affected by restricted angular coverage, partial blockage, and limited field of view, which may degrade detection reliability in three-dimensional UAV environments. For this reason, multi-TRP solutions have been suggested to improve spatial diversity and sensing robustness. In this paper, we present a system-level investigation of multi-TRP assisted monostatic sensing for UAV detection under standardized 3GPP UMa-AV channel assumptions and Release 19 evaluation parameters. We propose a spatial diversity fusion framework and evaluate the achievable performance of a 3GPP network by combining the measurements obtained independently at different TRP. Extensive evaluations demonstrate that multi-TRP assistance improves target observability, reduces spurious detections, and tightens localization error distributions at the cost of additional sensing overhead due to the need for multiple TRPs to periodically allocate radio resources for sensing measurements. In the evaluated scenario, results show that a voting threshold of two assisting TRPs achieves an optimal trade-off between miss detection probability and false alarm suppression, meeting 3GPP performance objectives. Furthermore, we quantify the sensing overhead and show that proper system design, tuned to the application requirements, can substantially reduce its impact: for example, extending the sensing refresh interval beyond the 128 ms coherent processing interval to 1 s reduces the effective overhead from 29 % to approximately 3.7 %, enabling more scalable network deployment.

cs.IT↗

arXiv2026

Evaluation of gNB Monostatic Sensing for UAV Use Case

3GPP Release 19 has initiated the standardization of integrated sensing and communications (ISAC), including a channel model for monostatic sensing, evaluation scenarios, and performance assessment methodologies. These common assumptions provide an important basis for ISAC evaluation, but reproducible end-to-end studies still require a transparent sensing implementation. This paper evaluates 5G New Radio (NR) base station (gNB)-based monostatic sensing for the Unmanned Aerial Vehicle (UAV) use case using a 5G NR downlink Cyclic Prefix-Orthogonal Frequency Division Multiplexing (CP-OFDM) waveform and positioning reference signals (PRS), following 3GPP Urban Macro-Aerial Vehicle (UMa-AV) scenario assumptions. We present an end-to-end processing chain for multi-target detection and 3D localization, achieving more than 70% detection probability with less than 5% false alarm rate, in the considered scenario. For correctly detected targets, localization errors are on the order of a few meters, with a 90th-percentile error of 4m and 6m in the vertical and horizontal directions, respectively. To support reproducible baseline studies and further research, we release the simulator 5GNRad, which reproduces our evaluation

eess.SP↗

arXiv2026

Semantically Annotated Multimodal Dataset for RF Interpretation and Prediction

Current limitations in wireless modeling and radio frequency (RF)-based AI are primarily driven by a lack of high-quality, measurement-based datasets that connect RF signals to their physical environments. RF heatmaps, the typical form of such data, are high-dimensional and complex but lack the geometric and semantic context needed for interpretation, constraining the development of supervised machine learning models. To address this bottleneck, we propose a new class of multimodal datasets that combines RF measurements with auxiliary modalities like high-resolution cameras and lidar to bridge the gap between RF signals and their physical causes. The proposed data collection will span diverse indoor and outdoor environments, featuring both static and dynamic scenarios, including human activities ranging from walking to subtle gestures. By achieving precise spatial and temporal co-registration and creating digital replicas for voxel-level annotation, this dataset will enable transformative AI research. Key tasks include the forward problem of predicting RF heatmaps from visual data to revolutionize wireless system design, and the inverse problem of inferring scene semantics from RF signals, creating a new form of RF-based perception.

cs.ET↗

arXiv2026

Taming Vision Priors for Data Efficient mmWave Channel Modeling

Accurately modeling millimeter-wave (mmWave) propagation is essential for real-time AR and autonomous systems. Differentiable ray tracing offers a physics-grounded solution but still facing deployment challenges due to its over-reliance on exhaustive channel measurements or brittle, hand-tuned scene models for material properties. We present VisRFTwin, a scalable and data-efficient digital-twin framework that integrates vision-derived material priors with differentiable ray tracing. Multi-view images from commodity cameras are processed by a frozen Vision-Language Model to extract dense semantic embeddings, which are translated into initial estimates of permittivity and conductivity for scene surfaces. These priors initialize a Sionna-based differentiable ray tracer, which rapidly calibrates material parameters via gradient descent with only a few dozen sparse channel soundings. Once calibrated, the association between vision features and material parameters is retained, enabling fast transfer to new scenarios without repeated calibration. Evaluations across three real-world scenarios, including office interiors, urban canyons, and dynamic public spaces show that VisRFTwin reduces channel measurement needs by up to 10$\times$ while achieving a 59% lower median delay spread error than pure data-driven deep learning methods.

cs.CV↗

arXiv2025

Enabling Site-Specific Cellular Network Simulation Through Ray-Tracing-Driven ns-3

Evaluating cellular systems, from 5G New Radio (NR) and 5G-Advanced to 6G, is challenging because the performance emerges from the tight coupling of propagation, beam management, scheduling, and higher-layer interactions. System-level simulation is therefore indispensable, yet the vast majority of studies rely on the statistical 3GPP channel models. These are well suited to capture average behavior across many statistical realizations, but cannot reproduce site-specific phenomena such as corner diffraction, street-canyon blockage, or deterministic line-of-sight conditions and angle-of-departure/arrival relationships that drive directional links. This paper extends 5G-LENA, an NR module for the system-level Network Simulator 3 (ns-3), with a trace-based channel model that processes the Multipath Components (MPCs) obtained from external ray-tracers (e.g., Sionna Ray Tracer (RT)) or measurement campaigns. Our module constructs frequency-domain channel matrices and feeds them to the existing Physical (PHY)/Medium Access Control (MAC) stack without any further modifications. The result is a geometry-based channel model that remains fully compatible with the standard 3GPP implementation in 5G-LENA, while delivering site-specific geometric fidelity. This new module provides a key building block toward Digital Twin (DT) capabilities by offering realistic site-specific channel modeling, unlocking studies that require site awareness, including beam management, blockage mitigation, and environment-aware sensing. We demonstrate its capabilities for precise beam-steering validation and end-to-end metric analysis. In both cases, the trace-driven engine exposes performance inflections that the statistical model does not exhibit, confirming its value for high-fidelity system-level cellular networks research and as a step toward DT applications.

cs.NI↗

arXiv2025

Detecting Airborne Objects with 5G NR Radars

The integration of sensing capabilities into 5G New Radio (5G NR) networks offers an opportunity to enable the detection of airborne objects without the need for dedicated radars. This paper investigates the feasibility of using standardized Positioning Reference Signals (PRS) to detect UAVs in Urban Micro (UMi) and Urban Macro (UMa) propagation environments. A full 5G NR radar processing chain is implemented, including clutter suppression, angle and range estimation, and 3D position reconstruction. Simulation results show that performance strongly depends on the propagation environment. 5G NR radars exhibit the highest missed detection rate, up to 16%, in UMi, due to severe clutter. Positioning error increases with target distance, resulting in larger errors in UMa scenarios and at higher UAV altitudes. In particular, the system achieves a position error within 4m in the UMi environment and within 8m in UMa. The simulation platform has been released as open-source software to support reproducible research in integrated sensing and communication (ISAC) systems.

eess.SP↗

arXiv2024

Sensing Performance of the IEEE 802.11bf Protocol and Its Impact on Data Communication

Wi-Fi sensing has been used to detect and track movements in an environment, resulting in the emergence of several innovative applications. Wi-Fi sensing can detect movement and locate objects by analyzing variations in the Wi-Fi signal due to its interaction with moving objects. Until recently, Wi-Fi sensing has been primarily available through proprietary solutions, which has limited its adoption. However, the recent initiative by the IEEE to develop the IEEE 802.11bf standard promises to make the adoption of Wi-Fi sensing widespread. Although Wi-Fi sensing procedures in communication standards can be overhead, there is currently a lack of literature exploring the sensing performance of Wi-Fi sensing procedures specified in the IEEE 802.11bf standard and its impact on data communication. Therefore, this paper presents a comprehensive evaluation of the sensing performance of the IEEE 802.11bf protocol and its impact on data communication in different configurations. Our findings expose the limitations of specific configurations and pave the way to provide guidance on efficient operating configurations of an IEEE 802.11bf network.

cs.NI↗

arXiv2021

Quasi-Deterministic Channel Model for mmWaves: Mathematical Formalization and Validation

5G and beyond networks will use, for the first time ever, the millimeter wave (mmWave) spectrum for mobile communications. Accurate performance evaluation is fundamental to the design of reliable mmWave networks, with accuracy rooted in the fidelity of the channel models. At mmWaves, the model must account for the spatial characteristics of propagation since networks will employ highly directional antennas to counter the much greater pathloss. In this regard, Quasi-Deterministic (QD) models are highly accurate channel models, which characterize the propagation in terms of clusters of multipath components, given by a reflected ray and multiple diffuse components of any given Computer Aided Design (CAD) scenario. This paper introduces a detailed mathematical formulation for QD models at mmWaves, that can be used as a reference for their implementation and development. Moreover, it compares channel instances obtained with an open source NIST QD model implementation against real measurements at 60 GHz, substantiating the accuracy of the model. Results show that, when comparing the proposed model and deterministic rays alone with a measurement campaign, the Kolmogorov-Smirnov (KS) test of the QD model improves by up to 0.537.

eess.SP↗

arXiv2019

An Analytical Model for CBAP Allocations in IEEE 802.11ad

The IEEE 802.11ad standard extends WiFi operation to the millimeter wave frequencies, and introduces novel features concerning both the physical (PHY) and Medium Access Control (MAC) layers. However, while there are extensive research efforts to develop mechanisms for establishing and maintaining directional links for mmWave communications, fewer works deal with transmission scheduling and the hybrid MAC introduced by the standard. The hybrid MAC layer provides for two different kinds of resource allocations: Contention Based Access Periods (CBAPs) and contention free Service Periods (SPs). In this paper, we propose a Markov Chain model to represent CBAPs, which takes into account operation interruptions due to scheduled SPs and the deafness and hidden node problems that directional communication exacerbates. We also propose a mathematical analysis to assess interference among stations. We derive analytical expressions to assess the impact of various transmission parameters and of the Data Transmission Interval configuration on some key performance metrics such as throughput, delay and packet dropping rate. This information may be used to efficiently design a transmission scheduler that allocates contention-based and contention-free periods based on the application requirements.

cs.NI↗