arXiv subjects

Nadav Priel

Publications and source records attributed to Nadav Priel.

12 recordsLinked to original sources

arXiv2024

Optomechanical vector sensing of new forces at 6 micron separation

The search for new gravity-like interactions at the sub-millimeter scale is a compelling area of research, with important implications for the understanding of classical gravity and its connections with quantum physics. We report improved constraints on Yukawa-type interactions in the $10\,\mathrm{\mu m}$ regime using optically levitated dielectric microspheres as test masses. The search is performed, for the first time, sensing multiple spatial components of the force vector, and with sensitivity improved by a factor of $\sim 100$ with respect to previous measurements using the same technique. The resulting upper limit on the strength of a hypothetical new force is $10^7$ at a Yukawa range $\lambda\simeq 5\;\mu$m and close to $10^6$ for $\lambda \gtrsim 10\;\mu$m. This result also advances our efforts to measure gravitational effects using micrometer-size objects, with important implications for embryonic ideas to investigate the quantum nature of gravity.

hep-ex↗

arXiv2023

Scalable architecture for trapped-ion quantum computing using RF traps and dynamic optical potentials

Qubits based on ions trapped in linear radio-frequency traps form a successful platform for quantum computing, due to their high fidelity of operations, all-to-all connectivity and degree of local control. In principle there is no fundamental limit to the number of ion-based qubits that can be confined in a single 1D register. However, in practice there are two main issues associated with long trapped-ion crystals, that stem from the 'softening' of their modes of motion, upon scaling up: high heating rates of the ions' motion, and a dense motional spectrum; both impede the performance of high-fidelity qubit operations. Here we propose a holistic, scalable architecture for quantum computing with large ion-crystals that overcomes these issues. Our method relies on dynamically-operated optical potentials, that instantaneously segment the ion-crystal into cells of a manageable size. We show that these cells behave as nearly independent quantum registers, allowing for parallel entangling gates on all cells. The ability to reconfigure the optical potentials guarantees connectivity across the full ion-crystal, and also enables efficient mid-circuit measurements. We study the implementation of large-scale parallel multi-qubit entangling gates that operate simultaneously on all cells, and present a protocol to compensate for crosstalk errors, enabling full-scale usage of an extensively large register. We illustrate that this architecture is advantageous both for fault-tolerant digital quantum computation and for analog quantum simulations.

quant-ph↗

arXiv2022

Librational Feedback Cooling

Librational motion, whereby a rigid body undergoes angular oscillation around a preferred direction, can be observed in optically trapped, silica microspheres. We demonstrate the cooling of one librational degree of freedom for $\sim 5~\mu$m diameter spheres that have been induced to rotate with an external electric field coupled to their electric dipole moment. Cooling is accomplished by adding a phase modulation to the rotating field. The degree of cooling is quantified by applying a $\pi/2$ shift to the phase of the electric field and fitting the resulting exponential decay of the librational motion to obtain a damping time, as well as estimating a mode temperature from the observed libration in equilibrium. The result is an important step in the study of the dynamics of trapped microspheres, crucial to cooling the mechanical motion to its ground state, as well as providing insights regarding the charge mobility in the material at microscopic scales.

physics.optics↗

arXiv2021

A background-free optically levitated charge sensor

Optically levitated macroscopic objects are a powerful tool in the field of force sensing, owing to high sensitivity, absolute force calibration, environmental isolation and the advanced degree of control over their dynamics that have been achieved. However, limitations arise from the spurious forces caused by electrical polarization effects that, even for nominally neutral objects, affect the force sensing because of the interaction of dipole moments with gradients of external electric fields. In this paper we introduce a new technique to model and eliminate dipole moment interactions limiting the performance of sensors employing levitated objects. This process leads to the first noise-limited measurement with a sensitivity of $3.3\times10^{-5}e$. As a demonstration, this is applied to the search for unknown charges of a magnitude much below that of an electron or for exceedingly small unbalances between electron and proton charges. The absence of remaining systematic biases, enables true discovery experiments, with sensitivities that are expected to improve as the system noise is brought down to or beyond the quantum limit. As a by-product of the technique, the electromagnetic properties of the levitated objects can also be measured on an individual basis.

hep-ex↗

arXiv2021

Search for non-Newtonian interactions at micrometer scale with a levitated test mass

We report on a search for non-Newtonian forces that couple to mass, with a characteristic scale of ${\sim}10~\mu$m, using an optically levitated microsphere as a precision force sensor. A silica microsphere trapped in an upward-propagating, single-beam, optical tweezer is utilized to probe for interactions sourced from a nanofabricated attractor mass with a density modulation brought into close proximity to the microsphere and driven along the axis of periodic density in order to excite an oscillating response. We obtain force sensitivity of ${\lesssim}10^{-16}~\rm{N}/\sqrt{\rm{Hz}}$. Separately searching for attractive and repulsive forces results in the constraint on a new Yukawa interaction of $|\alpha| \gtrsim 10^8$ for $\lambda > 10~\mu$m. This is the first test of the inverse-square law using an optically levitated test mass of dimensions comparable to $\lambda$, a complementary method subject to a different set of systematic effects compared to more established techniques.

hep-ex↗

arXiv2020

High sensitivity, levitated microsphere apparatus for short-distance force measurements

A high sensitivity force sensor based on dielectric microspheres in vacuum, optically trapped by a single, upward-propagating laser beam, is described. Off-axis parabolic mirrors are used both to focus the 1064~nm trapping beam and to recollimate it to provide information on the horizontal position of the microsphere. The vertical degree of freedom is readout by forming an interferometer between the light retroreflected by the microsphere and a reference beam, hence eliminating the need for auxiliary beams. The focus of the trapping beam has a 1/e$^2$ radius of 3.2~$μ$m and small non-Gaussian tails, suitable for bringing devices close to the trapped microsphere without disturbing the optical field. Electrodes surrounding the trapping region provide excellent control of the electric field, which can be used to drive the translational degrees of freedom of a charged microsphere and the rotational degrees of freedom of a neutral microsphere, coupling to its electric dipole moment. With this control, the charge state can be determined with single electron precision, the mass of individual microspheres can be measured, and empirical calibrations of the force sensitivity can be made for each microsphere. A force noise of $<1\times10^{-17}$~N/$\sqrt{\rm Hz}$, which is comparable to previous reports, is measured on all three degrees of freedom for 4.7~$μ$m diameter, 84~pg silica microspheres. Various devices have been brought within $1.6~μ$m of the surface of a trapped microsphere. Metrology in the trapping region is provided by two custom-designed microscopes providing views in the horizontal and one of the vertical planes. The apparatus opens the way to performing high sensitivity three-dimensional force measurements at short distance.

physics.ins-det↗

arXiv2020

Searching for a solar relaxion/scalar with XENON1T and LUX

We consider liquid xenon dark matter detectors for searching a light scalar particle produced in the solar core, specifically one that couples to electrons. Through its interaction with the electrons, the scalar particle can be produced in the Sun, mainly through Bremsstrahlung process, and subsequently it is absorbed by liquid xenon atoms, leaving prompt scintillation light and ionization events. Using the latest experimental results of XENON1T and Large Underground Xenon, we place bounds on the coupling between electrons and a light scalar as $g_{ϕee} < 7 \times 10^{-15}$ from S1-only analysis, and as $g_{ϕee} < 2 \times 10^{-15}$ from S2-only analysis. These can be interpreted as bounds on the mixing angle with the Higgs, $\sin θ< 2 \times 10^{-9} \, \left(7 \times 10^{-10}\right)$, for the case of a relaxion that couples to the electrons via this mixing. The bounds are a factor few weaker than the strongest indirect bound inferred from stellar evolution considerations.

hep-ph↗

arXiv2020

Absolute pressure and gas species identification with an optically levitated rotor

The authors describe a novel variety of spinning-rotor vacuum gauge in which the rotor is a ${\sim}4.7{\text -}μ$m-diameter silica microsphere, optically levitated. A rotating electrostatic field is used to apply torque to the permanent electric dipole moment of the silica microsphere and control its rotational degrees of freedom. When released from a driving field, the microsphere's angular velocity decays exponentially with a damping time inversely proportional to the residual gas pressure, and dependent on gas composition. The gauge is calibrated by measuring the rotor mass with electrostatic co-levitation, and assuming a spherical shape, confirmed separately, and uniform density. The gauge is cross-checked against a capacitance manometer by observing the torsional drag due to a number of different gas species. The techniques presented can be used to perform absolute vacuum measurements localized in space, owing to the small dimensions of the microsphere and the ability to translate the optical trap in three dimensions, as well as measurements in magnetic field environments. In addition, the dynamics of the microsphere, paired with a calibrated vacuum gauge, can be used to measure the effective molecular mass of a gas mixture without the need for ionization and at pressures up to approximately 1 mbar.

physics.ins-det↗

arXiv2019

Precision Mass and Density Measurement of Individual Optically Levitated Microspheres

We report an $\textit{in situ}$ mass measurement of approximately-$4.7{\text -}μ$m-diameter, optically levitated microspheres with an electrostatic co-levitation technique. The mass of a trapped, charged microsphere is measured by holding its axial (vertical) position fixed with an optical feedback force, under the influence of a known electrostatic force. A mass measurement with $1.8\%$ systematic uncertainty is obtained by extrapolating to the electrostatic force required to support the microsphere against gravity in the absence of optical power. In three cases, the microspheres are recovered from the trap on a polymer-coated silicon beam and imaged with an electron microscope to measure their radii. The simultaneous precision characterization of the mass and radius of individual microspheres implies a density of $1.55\pm0.08~$g/cm$^3$. The ability to recover individual microspheres from an optical trap opens the door to further diagnostics.

physics.ins-det↗

arXiv2019

Electrically Driven, Optically Levitated Microscopic Rotors

We report on the electrically driven rotation of $2.4~μ$m-radius, optically levitated dielectric microspheres. Electric fields are used to apply torques to a microsphere's permanent electric dipole moment, while angular displacement is measured by detecting the change in polarization state of light transmitted through the microsphere (MS). This technique enables greater control than previously achieved with purely optical means because the direction and magnitude of the electric torque can be set arbitrarily. We measure the spin-down of a microsphere released from a rotating electric field, the harmonic motion of the dipole relative to the instantaneous direction of the field, and the phase lag between the driving electric field and the dipole moment of the MS due to drag from residual gas. We also observe the gyroscopic precession of the MS when the axis of rotation of the driving field and the angular momentum of the microsphere are orthogonal. These observations are in quantitative agreement with the equation of motion. The control offered by the electrical drive enables precise measurements of microsphere properties and torque as well as a method for addressing the direction of angular momentum for an optically levitated particle.

physics.optics↗

arXiv2019

Wide band spectroscopic response of monocrystallines to low dose neutron and gamma radiation

We identify a number of crystalline structures with promising characteristics to serve as a detection medium for a novel Dark Matter (DM) detector with a low threshold energy. A detector of this kind can be specifically useful in application requiring the detection of nuclear recoils, such as in direct detection of low mass DM, coherent neutrino scattering and neutrons. We describe a broad band, high sensitivity optical setup designed and constructed for the purpose of this search and future investigations of specific crystals. We report on the fluorescent signals produced from exposure to low doses of neutrons and $γ$ rays and find potential targets in Quartz, Sapphire, LiF, CaF$_{2}$ and BaF$_{2}$. These crystals and specific signals will be the subject of further study to establish the various traits relevant for a full scale DM detector. In this paper we identify the most interesting signals that will be promoted to significantly more detailed studies, including their production mechanism.

physics.ins-det↗

arXiv2016

A model independent safeguard for unbinned Likelihood

We present a universal method to include residual un-modeled background shape uncertainties in likelihood based statistical tests for high energy physics and astroparticle physics. This approach provides a simple and natural protection against mismodeling, thus lowering the chances of a false discovery or of an over constrained confidence interval, and allows a natural transition to unbinned space. Unbinned likelihood allows optimal usage of information for the data and the models, and enhances the sensitivity. We show that the asymptotic behavior of the test statistic can be regained in cases where the model fails to describe the true background behavior, and present 1D and 2D case studies for model-driven and data-driven background models. The resulting penalty on sensitivities follows the actual discrepancy between the data and the models, and is asymptotically reduced to zero with increasing knowledge.

physics.data-an↗