SearcharxivSearch

arXiv subjects

Nadine Hauptmann

Publications and source records attributed to Nadine Hauptmann.

11 recordsLinked to original sources

Collective excitation-mediated transport in nanoscale Josephson junctions that exhibit quantum confinement

Quantum confinement can strongly modify transport through Josephson junctions. Here, we study local tunneling transport through nanoscale Josephson junction stacks in the Coulomb blockade regime, where the metallic layers exhibit strong vertical quantum confinement. We find that quasiparticle transport is strongly enhanced by a collective excitation mode intrinsic to the junction and localized in the isolated metallic overlayer. We quantify both the collective-mode energy and the Coulomb gap and show that both exhibit strong layer-dependent modulation, consistent with the modulation of the underlying quantum well states. We further investigate how the collective excitation responds to various perturbations, including mechanical motion and an applied magnetic field. Our results suggest that this collective mode is sensitive to quasiparticles near the Fermi level and may therefore provide an indirect probe of the superconducting state.

cond-mat.supr-con

Influence of surface relaxations on scanning probe microscopy images of the charge density wave material 2H-NbSe$_2$

Scanning tunneling microscopy is the method of choice for characterizing charge density waves by imaging the variation in atomic-scale contrast of the surface. Due to the measurement principle of scanning tunneling microscopy, the electronic and lattice degrees of freedom are convoluted, making it difficult to disentangle a structural displacement from spatial variations in the electronic structure. In this work, we characterize the influence of the displacement of the surface-terminating Se atoms on the 3 x 3 charge density wave contrast in scanning probe microscopy images of 2H-NbSe$_2$. In scanning tunneling microscopy images, we observe the 3 x 3 charge density wave superstructure and atomic lattice at all probed tip-sample distances. In contrast, non-contact atomic force microscopy images show both periodicities only at small tip-sample distances while, unexpectedly, a 3 x 3 superstructure is present at larger tip-sample distances. Using density functional theory calculations, we qualitatively reproduce the experimental findings and indicate that the 3 x 3 superstructure at different tip-sample distances in non-contact atomic force microscopy images is a result from different underlying interactions. In addition, we show that the displacement of the surface-terminating Se atoms has a negligible influence to the contrast in scanning tunneling microscopy images. Our combined experimental and theoretic work presents a method on how to discriminate the influence of the surface corrugation from the variation of the charge density to the charge density wave contrast in scanning probe microscopy images, which can provide insights into the influence of structural disorder to a charge density wave ground state.

cond-mat.mes-hall

Creating tunable and coupled Rashba-type quantum dots atom-by-atom

Artificial lattices created by assembling atoms on a surface with scanning tunneling microscopy present a platform to create matter with tailored electronic, magnetic and topological properties. However, such artificial lattices studies to date have focused exclusively on surfaces with weak spin-orbit coupling. Here, we created artificial and coupled quantum dots by fabricating quantum corrals from iron atoms on the prototypical Rashba surface alloy, BiCu2, using low-temperature scanning tunneling microscopy. We quantified the quantum confinement of such quantum dots with various diameter and related this to the spatially dependent density of states, using scanning tunneling spectroscopy. We found that the density of states shows complex distributions beyond the typical isotropic patterns seen in radially symmetric structures on (111) noble metal surfaces. We related these to the energy-dependent interplay of the confinement potential with the hexagonal warping and multiple intra- and interband scattering vectors, which we simulated with a particle-in-a-box model that considers the Rashba-type band structure of BiCu2. Based on these results, we studied the effect of coupling two quantum dots and exploited the resultant anisotropic coupling derived from the symmetry of the various scattering channels. The large anisotropy and spin-orbit coupling provided by the BiCu2 platform are two key ingredients toward creation of correlated artificial lattices with non-trivial topology.

cond-mat.mes-hall

Self-induced spin glass state in elemental and crystalline neodymium

Spin glasses are a highly complex magnetic state of matter, intricately linked to spin frustration and structural disorder. They exhibit no long-range order and exude aging phenomena, distinguishing them from quantum spin liquids. We report a new type of spin glass state, the spin-Q glass, observable in bulk-like crystalline metallic neodymium thick films. Using spin-polarized scanning tunneling microscopy combined with ab initio calculations and atomistic spin-dynamics simulations, we visualize the variations in atomic-scale non-collinear order and its response to magnetic field and temperature. We quantify the aging phenomena relating the glassiness to crystalline symmetry and the energy landscape. This result not only resolves the long-standing debate of the magnetism of neodymium, but also suggests that glassiness may arise in other magnetic solids lacking extrinsic disorder.

cond-mat.mtrl-sci

Quantifying Exchange Forces of a Non-Collinear Magnetic Structure on the Atomic Scale

The large interest in chiral magnetic structures for realization of nanoscale magnetic storage or logic devices has necessitated methods which can quantify magnetic interactions at the atomic scale. To overcome the limitations of the typically used current-based sensing of atomic-scale exchange interactions, a force-based detection scheme is highly advantageous. Here, we quantify the atomic-scale exchange force field between a ferromagnetic tip and a cycloidal spin spiral using our developed combination of current and exchange force detection. Compared to the surprisingly weak spin polarization, the exchange force field is more sensitive to atomic-scale variations in the magnetization. First-principles calculations reveal that the measured atomic-scale variations in the exchange force originate from different contributions of direct and indirect (Zener) type exchange mechanisms, depending on the chemical tip termination. Our work opens the perspective of quantifying different exchange mechanisms of chiral magnetic structures with atomic-scale precision using 3D magnetic exchange force field measurements.

cond-mat.mes-hall

Revealing the correlation between real-space structure and chiral magnetic order at the atomic scale

We image simultaneously the geometric, electronic and magnetic structure of a buckled iron bilayer film that exhibits chiral magnetic order. We achieve this by combining spin-polarized scanning tunneling microscopy and magnetic exchange force microscopy (SPEX), to independently characterize the geometric as well as the electronic and magnetic structure of non-flat surfaces. This new SPEX imaging technique reveals the geometric height corrugation of the reconstruction lines resulting from strong strain relaxation in the bilayer, enabling the decomposition of the real-space from the eletronic structure at the atomic level, and the correlation with the resultant spin spiral ground state. By additionally utilizing adatom manipulation, we reveal the chiral magnetic ground state of portions of the unit cell that were not previously imaged with SP-STM alone. Using density functional theory (DFT), we investigate the structural and electronic properties of the reconstructed bilayer and identify the favorable stoichiometry regime in agreement with our experimental result.

cond-mat.mes-hall

Sensing Noncollinear Magnetism at the Atomic Scale Combining Magnetic Exchange and Spin-Polarized Imaging

Storing and accessing information in atomic-scale magnets requires magnetic imaging techniques with single-atom resolution. Here, we show simultaneous detection of the spin-polarization and exchange force, with or without the flow of current, with a new method, which combines scanning tunneling microscopy and non-contact atomic force microscopy. To demonstrate the application of this new method, we characterize the prototypical nano-skyrmion lattice formed on a monolayer of Fe/Ir(111). We resolve the square magnetic lattice by employing magnetic exchange force microscopy, demonstrating its applicability to non-collinear magnetic structures, for the first time. Utilizing distance-dependent force and current spectroscopy, we quantify the exchange forces in comparison to the spin-polarization. For strongly spin-polarized tips, we distinguish different signs of the exchange force which we suggest arises from a change in exchange mechanisms between the probe and a skyrmion. This new approach may enable both non-perturbative readout combined with writing by current-driven reversal of atomic-scale magnets.

cond-mat.mes-hall

Probing Single Vacancies in Black Phosphorus at the Atomic Level

Utilizing a combination of low-temperature scanning tunneling microscopy/spectroscopy (STM/STS) and electronic structure calculations, we characterize the structural and electronic properties of single atomic vacancies within several monolayers of the surface of black phosphorus. We illustrate, with experimental analysis and tight-binding calculations, that we can depth profile these vacancies and assign them to specific sublattices within the unit cell. Measurements reveal that the single vacancies exhibit strongly anisotropic and highly delocalized charge density, laterally extended up to 20 atomic unit cells. The vacancies are then studied with STS, which reveals in-gap resonance states near the valence band edge and a strong p-doping of the bulk black phosphorus crystal. Finally, quasiparticle interference generated near these vacancies enables the direct visualization of the anisotropic band structure of black phosphorus.

cond-mat.mtrl-sci

Interactions between two C60 molecules measured by scanning probe microscopies

C60-functionalized tips are used to probe C60 molecules on Cu(111) with scanning tunneling and atomic force microscopy. Distinct and complex intramolecular contrasts are found. Maximal attractive forces are observed when for both molecules a [6,6] bond faces a hexagon of the other molecule. Density functional theory calculations including parameterized van der Waals interactions corroborate the observations.

cond-mat.mes-hall

Single-layer MoS$_2$ on Au(111): band gap renormalization and substrate interaction

The electronic structure of epitaxial single-layer MoS$_2$ on Au(111) is investigated by angle-resolved photoemission spectroscopy, scanning tunnelling spectroscopy, and first principles calculations. While the band dispersion of the supported single-layer is close to a free-standing layer in the vicinity of the valence band maximum at $\bar{K}$ and the calculated electronic band gap on Au(111) is similar to that calculated for the free-standing layer, significant modifications to the band structure are observed at other points of the two-dimensional Brillouin zone: At $\barΓ$, the valence band maximum has a significantly higher binding energy than in the free MoS$_2$ layer and the expected spin-degeneracy of the uppermost valence band at the $\bar{M}$ point cannot be observed. These band structure changes are reproduced by the calculations and can be explained by the detailed interaction of the out-of-plane MoS$_2$ orbitals with the substrate.

cond-mat.str-el

Force and Conductance during contact formation to a C60 molecule

Force and conductance were simultaneously measured during the formation of Cu-C60 and C60-C60 contacts using a combined cryogenic scanning tunneling and atomic force microscope. The contact geometry was controlled with submolecular resolution. The maximal attractive forces measured for the two types of junctions were found to differ significantly. We show that the previously reported values of the contact conductance correspond to the junction being under maximal tensile stress.

cond-mat.mes-hall