Searcharxiv⌕ Search

arXiv subjects

Nan Cheng

Publications and source records attributed to Nan Cheng.

At least 37 records · Page 2Linked to original sources
arXiv2026

Beam-Aware Radio Map Estimation With Physics-Consistent Parametric Modeling for Unknown Multiple Satellites

Satellite networks with dense low Earth orbit (LEO) constellations rely on aggressive spectrum reuse, making co-channel interference a dominant and rapidly varying factor that limits link availability and complicates spectrum sharing and compliance. Satellite radio map (RM) construction is therefore essential for interference cognition, yet it is challenging because the active satellite set is unknown, beam footprints and pointing are not directly observable, and received signal strength (RSS) measurements are difficult to calibrate under coupled link budget variations and noise. These latent uncertainties yield a severely underdetermined inverse problem with strong signature coherence, where existing methods often trade detection recall for precision and still fail to recover a faithful continuous RSS field. This paper proposes a beam-aware RM estimation framework that unifies active satellite identification and RSS field reconstruction through physics-consistent parametric modeling. An interpretable structural prior links geometry and beam shaping to spatial RSS formation, and an adaptive model order selection strategy infers the number of active satellites from measurements by balancing fit and complexity. Extensive experiments across varying signal to noise ratio (SNR), total satellite count, and active satellite count demonstrate consistently higher RSS spatial correlation, lower root mean squared error (RMSE), and improved F1 score, validating the proposed approach for interference-aware satellite RM construction in satellite networks.

cs.IT↗
arXiv2026

Joint Optimization of Trajectory Control, Resource Allocation, and Task Offloading for Multi-UAV-Assisted IoV

This paper investigates a multi-Unmanned Aerial Vehicle (UAV) joint base station-assisted Internet of Vehicles (IoV) task offloading system in dense urban environments. To minimize system delay and energy consumption under strict coupling constraints, the complex non-convex optimization problem is decoupled into a hierarchical execution framework. First, a sequential distributed optimization algorithm based on Second-Order Cone Programming (SOCP) is proposed to optimize the 3D flight trajectory of each UAV, ensuring adaptive network coverage. Second, a novel hybrid resource scheduling paradigm synergizing Deep Reinforcement Learning (DRL) and Large Language Models (LLMs) is developed. Within this framework, the DRL agent dictates the initial resource allocation, while the LLM acts as a semantic macro-scheduler to rectify long-tail allocation imbalances for failed and surplus tasks. Crucially, a reward decoupling mechanism is introduced to isolate DRL training from external LLM interventions, thereby ensuring policy convergence. Finally, the task offloading ratios are precisely determined via Linear Programming (LP) within an alternating optimization loop. Simulation results demonstrate that the proposed method significantly outperforms traditional multi-agent reinforcement learning baselines in terms of task success rate and system efficiency.

cs.NI↗
arXiv2026

Observation of Universal Spectral Moments and the Dynamic Dispersive-to-Proliferative Transition

In non-Hermitian systems, spectra can be maximally boundary-sensitive, yet bulk physics need not be. Here we experimentally show that spectral moments provide boundary-robust bulk observables in finite non-Hermitian lattices, even when the spectra undergo dramatic geometry-dependent reshaping due to the skin effect. Using a unified acoustic platform with full spectral reconstruction and time-domain access, we probe one-, two- and three-dimensional lattices and demonstrate that spectral moments remain nearly invariant across distinct boundary geometries while the corresponding complex spectra differ strongly. To connect the thermodynamic theorem to realistic finite systems, we develop a loop-counting theory that identifies the physical origin of finite-size deviations in terms of missing boundary loops, quantitatively captures the corrections, and predicts a scaling law, which we verify experimentally. Beyond acoustic spectroscopy, we reveal a counterintuitive dynamical consequence of moment invariance: a dispersive-to-proliferative bulk transition governed by bulk moment structure rather than spectral boundary sensitivity. As a result, local bulk dynamics can remain stable (dispersive) even in a $\mathcal{PT}$-broken spectral regime, challenging the conventional expectation that $\mathcal{PT}$ breaking necessarily implies feedback-induced dynamical instability (proliferation) through exponentially amplifying spectral components. These results establish spectral moments as practical bulk descriptors for finite non-Hermitian matter and open a route to extracting and controlling intrinsic bulk behavior in realistic wave-based non-Hermitian devices.

quant-ph↗
arXiv2026

Hierarchical Reinforcement Learning with Augmented Step-Level Transitions for LLM Agents

Large language model (LLM) agents have demonstrated strong capabilities in complex interactive decision-making tasks. However, existing LLM agents typically rely on increasingly long interaction histories, resulting in high computational cost and limited scalability. In this paper, we propose STEP-HRL, a hierarchical reinforcement learning (HRL) framework that enables step-level learning by conditioning only on single-step transitions rather than full interaction histories. STEP-HRL structures tasks hierarchically, using completed subtasks to represent global progress of overall task. By introducing a local progress module, it also iteratively and selectively summarizes interaction history within each subtask to produce a compact summary of local progress. Together, these components yield augmented step-level transitions for both high-level and low-level policies. Experimental results on ScienceWorld and ALFWorld benchmarks consistently demonstrate that STEP-HRL substantially outperforms baselines in terms of performance and generalization while reducing token usage. Our code is available at https://github.com/TonyStark042/STEP-HRL.

cs.AI↗
arXiv2026

Physics-informed line-of-sight learning for scalable deterministic channel modeling

Deterministic channel modeling maps a physical environment to its site-specific electromagnetic response. Ray tracing produces complete multi-dimensional channel information but remains prohibitively expensive for area-wide deployment. We identify line-of-sight (LoS) region determination as the dominant bottleneck. To address this, we propose D$^2$LoS, a physics-informed neural network that reformulates dense pixel-level LoS prediction into sparse vertex-level visibility classification and projection point regression, avoiding the spectral bias at sharp boundaries. A geometric post-processing step enforces hard physical constraints, yielding exact piecewise-linear boundaries. Because LoS computation depends only on building geometry, cross-band channel information is obtained by updating material parameters without retraining. We also construct RayVerse-100, a ray-level dataset spanning 100 urban scenarios with per-ray complex gain, angle, delay, and geometric trajectory. Evaluated against rigorous ray tracing ground truth, D$^2$LoS achieves 3.28~dB mean absolute error in received power, 4.65$^\circ$ angular spread error, and 20.64~ns delay spread error, while accelerating visibility computation by over 25$\times$.

cs.IT↗
arXiv2026

A Channel-Triggered Backdoor Attack on Wireless Semantic Image Reconstruction

This paper investigates backdoor attacks in image-oriented semantic communications. The threat of backdoor attacks on symbol reconstruction in semantic communication (SemCom) systems has received limited attention. Previous research on backdoor attacks targeting SemCom symbol reconstruction primarily focuses on input-level triggers, which are impractical in scenarios with strict input constraints. In this paper, we propose a novel channel-triggered backdoor attack (CT-BA) framework that exploits inherent wireless channel characteristics as activation triggers. Our key innovation involves utilizing fundamental channel statistics parameters, specifically channel gain with different fading distributions or channel noise with different power, as potential triggers. This approach enhances stealth by eliminating explicit input manipulation, provides flexibility through trigger selection from diverse channel conditions, and enables automatic activation via natural channel variations without adversary intervention. We extensively evaluate CT-BA across four joint source-channel coding (JSCC) communication system architectures and three benchmark datasets. Simulation results demonstrate that our attack achieves near-perfect attack success rate (ASR) while maintaining effective stealth. Finally, we discuss potential defense mechanisms against such attacks.

cs.CR↗
arXiv2026

RadioDiff-FS: Physics-Informed Manifold Alignment in Few-Shot Diffusion Models for High-Fidelity Radio Map Construction

Radio maps (RMs) provide spatially continuous propagation characterizations essential for 6G network planning, but high-fidelity RM construction remains challenging. Rigorous electromagnetic solvers incur prohibitive computational latency, while data-driven models demand massive labeled datasets and generalize poorly from simplified simulations to complex multipath environments. This paper proposes RadioDiff-FS, a few-shot diffusion framework that adapts a pretrained main-path generator to multipath-rich target domains with only a small number of high-fidelity samples. The adaptation is grounded in a theoretical decomposition of the multipath RM into a dominant main-path component and a directionally sparse residual. This decomposition shows that the cross-domain shift corresponds to a bounded and geometrically structured feature translation rather than an arbitrary distribution change. A direction-consistency loss (DCL) is then introduced to constrain diffusion score updates along physically plausible propagation directions, thereby suppressing phase-inconsistent artifacts that arise in the low-data regime. Experiments show that RadioDiff-FS reduces NMSE by 59.5\% on static RMs and by 74.0\% on dynamic RMs relative to the vanilla diffusion baseline, achieving an SSIM of 0.9752 and a PSNR of 36.37 dB under severely limited supervision. Even in a one-shot setting with a single target-domain sample per scene, RadioDiff-FS outperforms all fully supervised baselines, confirming that the directional constraint provides an effective inductive bias under extreme data scarcity. Code is available at https://github.com/UNIC-Lab/RadioDiff-FS.

eess.SY↗
arXiv2026

BeamAgent: LLM-Aided MIMO Beamforming with Decoupled Intent Parsing and Alternating Optimization for Joint Site Selection and Precoding

Integrating large language models (LLMs) into wireless communication optimization is a promising yet challenging direction. Existing approaches either use LLMs as black-box solvers or code generators, tightly coupling them with numerical computation. However, LLMs lack the precision required for physical-layer optimization, and the scarcity of wireless training data makes domain-specific fine-tuning impractical. We propose BeamAgent, an LLM-aided MIMO beamforming framework that explicitly decouples semantic intent parsing from numerical optimization. The LLM serves solely as a semantic translator that converts natural language descriptions into structured spatial constraints. A dedicated gradient-based optimizer then jointly solves the discrete base station site selection and continuous precoding design through an alternating optimization algorithm. A scene-aware prompt enables grounded spatial reasoning without fine-tuning, and a multi-round interaction mechanism with dual-layer intent classification ensures robust constraint verification. A penalty-based loss function enforces dark-zone power constraints while releasing optimization degrees of freedom for bright-zone gain maximization. Experiments on a ray-tracing-based urban MIMO scenario show that BeamAgent achieves a bright-zone power of 84.0\,dB, outperforming exhaustive zero-forcing by 7.1 dB under the same dark-zone constraint. The end-to-end system reaches within 3.3 dB of the expert upper bound, with the full optimization completing in under 2 s on a laptop.

cs.IT↗
arXiv2026

Neural Electromagnetic Fields for High-Resolution Material Parameter Reconstruction

Creating functional Digital Twins, simulatable 3D replicas of the real world, is a central challenge in computer vision. Current methods like NeRF produce visually rich but functionally incomplete twins. The key barrier is the lack of underlying material properties (e.g., permittivity, conductivity). Acquiring this information for every point in a scene via non-contact, non-invasive sensing is a primary goal, but it demands solving a notoriously ill-posed physical inversion problem. Standard remote signals, like images and radio frequencies (RF), deeply entangle the unknown geometry, ambient field, and target materials. We introduce NEMF, a novel framework for dense, non-invasive physical inversion designed to build functional digital twins. Our key insight is a systematic disentanglement strategy. NEMF leverages high-fidelity geometry from images as a powerful anchor, which first enables the resolution of the ambient field. By constraining both geometry and field using only non-invasive data, the original ill-posed problem transforms into a well-posed, physics-supervised learning task. This transformation unlocks our core inversion module: a decoder. Guided by ambient RF signals and a differentiable layer incorporating physical reflection models, it learns to explicitly output a continuous, spatially-varying field of the scene's underlying material parameters. We validate our framework on high-fidelity synthetic datasets. Experiments show our non-invasive inversion reconstructs these material maps with high accuracy, and the resulting functional twin enables high-fidelity physical simulation. This advance moves beyond passive visual replicas, enabling the creation of truly functional and simulatable models of the physical world.

cs.CV↗
arXiv2026

Flexible Coupler Array with Reconfigurable Pattern: Mechanical Beamforming and Digital Agent

Flexible coupler is a promising solution for enhancing wireless network capacity by moving passive couplers around a fixed-position active antenna to reshape the induced currents on passive elements. Motivated by this, this paper proposes a novel flexible coupler array that incorporates additional degrees of freedom (DoF) in radiation pattern reconfiguration and enhanced communication coverage with low hardware cost. Specifically, a new form of mechanical beamforming can be obtained by moving only the passive coupling elements while keeping the active antenna stationary. In addition, the flexible coupler antenna can slide along a rail toward users, thereby enhancing communication coverage. To fully exploit the potential of the flexible coupler array, we formulate a two-timescale sum-rate maximization problem with statistical channel state information (CSI). The antenna position is optimized based on scattering cluster-core statistics in the slow timescale, while mechanical beamforming is optimized based on multipath channel statistics in the fast timescale, subject to movement and energy constraints. To address the coupling between timescales and the high cost of extensive channel sampling, we develop a digital agent framework that leverages an electromagnetic (EM) map to generate statistical channel information for different user and antenna positions. Then, a deep neural network is trained to learn a slow-fast performance (SFP) surrogate. Mechanical beamforming at the fast timescale is obtained by selecting per-antenna radiation patterns from a predefined dictionary via a convex relaxation. Simulation results verify the performance gains achieved by the proposed flexible coupler array and the digital-agent-assisted algorithm.

cs.IT↗
arXiv2026

Phase-space entropy at acquisition reflects downstream learnability

Modern learning systems work with data that vary widely across domains, but they all ultimately depend on how much structure is already present in the measurements before any model is trained. This raises a basic question: is there a general, modality-agnostic way to quantify how acquisition itself preserves or destroys the information that downstream learners could use? Here we propose an acquisition-level scalar $ΔS_{\mathcal B}$ based on instrument-resolved phase space. Unlike pixelwise distortion or purely spectral errors that often saturate under aggressive undersampling, $ΔS_{\mathcal B}$ directly quantifies how acquisition mixes or removes joint space--frequency structure at the instrument scale. We show theoretically that \(ΔS_{\mathcal B}\) correctly identifies the phase-space coherence of periodic sampling as the physical source of aliasing, recovering classical sampling-theorem consequences. Empirically, across masked image classification, accelerated MRI, and massive MIMO (including over-the-air measurements), $|ΔS_{\mathcal B}|$ consistently ranks sampling geometries and predicts downstream reconstruction/recognition difficulty \emph{without training}. In particular, minimizing $|ΔS_{\mathcal B}|$ enables zero-training selection of variable-density MRI mask parameters that matches designs tuned by conventional pre-reconstruction criteria. These results suggest that phase-space entropy at acquisition reflects downstream learnability, enabling pre-training selection of candidate sampling policies and as a shared notion of information preservation across modalities.

cs.LG↗
arXiv2026

NLoS Localization with Single Base Station Based on Radio Map

Accurate outdoor localization in Non-Line-of-Sight (NLoS) environments remains a critical challenge for wireless communication and sensing systems. Existing methods, including positioning based on the Global Navigation Satellite System (GNSS) and triple Base Stations (BSs) techniques, cannot provide reliable performance under NLoS conditions, particularly in dense urban areas with strong multipath effects. To address this limitation, we propose a single BS localization framework that integrates sequential signal measurements with prior radio information embedded in the Radio Map (RM). Using temporal measurement features and matching them with radio maps, the proposed method effectively mitigates the adverse impact of multipath propagation and reduces the dependence on LoS paths. Simulation experiments further evaluate the impact of different radio map construction strategies and the varying lengths of the measurement sequence on localization accuracy. Results demonstrate that the proposed scheme achieves sub-meter positioning accuracy in typical NLoS environments, highlighting its potential as a practical and robust solution for single-base-station deployment.

eess.SY↗
arXiv2026

LLM-Empowered Cooperative Content Caching in Vehicular Fog Caching-Assisted Platoon Networks

This letter proposes a novel three-tier content caching architecture for Vehicular Fog Caching (VFC)-assisted platoon, where the VFC is formed by the vehicles driving near the platoon. The system strategically coordinates storage across local platoon vehicles, dynamic VFC clusters, and cloud server (CS) to minimize content retrieval latency. To efficiently manage distributed storage, we integrate large language models (LLMs) for real-time and intelligent caching decisions. The proposed approach leverages LLMs' ability to process heterogeneous information, including user profiles, historical data, content characteristics, and dynamic system states. Through a designed prompting framework encoding task objectives and caching constraints, the LLMs formulate caching as a decision-making task, and our hierarchical deterministic caching mapping strategy enables adaptive requests prediction and precise content placement across three tiers without frequent retraining. Simulation results demonstrate the advantages of our proposed caching scheme.

cs.NI↗
arXiv2026

Accurate Network Traffic Matrix Prediction via LEAD: a Large Language Model-Enhanced Adapter-Based Conditional Diffusion Model

Driven by the evolution toward 6G and AI-native edge intelligence, network operations increasingly require predictive and risk-aware adaptation under stringent computation and latency constraints. Network Traffic Matrix (TM), which characterizes flow volumes between nodes, is a fundamental signal for proactive traffic engineering. However, accurate TM forecasting remains challenging due to the stochastic, non-linear, and bursty nature of network dynamics. Existing discriminative models often suffer from over-smoothing and provide limited uncertainty awareness, leading to poor fidelity under extreme bursts. To address these limitations, we propose LEAD, a Large Language Model (LLM)-Enhanced Adapter-based conditional Diffusion model. First, LEAD adopts a "Traffic-to-Image" paradigm to transform traffic matrices into RGB images, enabling global dependency modeling via vision backbones. Then, we design a "Frozen LLM with Trainable Adapter" model, which efficiently captures temporal semantics with limited computational cost. Moreover, we propose a Dual-Conditioning Strategy to precisely guide a diffusion model to generate complex, dynamic network traffic matrices. Experiments on the Abilene and GEANT datasets demonstrate that LEAD outperforms all baselines. On the Abilene dataset, LEAD attains a remarkable 45.2% reduction in RMSE against the best baseline, with the error margin rising only marginally from 0.1098 at one-step to 0.1134 at 20-step predictions. Meanwhile, on the GEANT dataset, LEAD achieves a 0.0258 RMSE at 20-step prediction horizon which is 27.3% lower than the best baseline.

cs.LG↗
arXiv2026

RadioDiff-Flux: Efficient Radio Map Construction via Generative Denoise Diffusion Model Trajectory Midpoint Reuse

Accurate radio map (RM) construction is essential to enabling environment-aware and adaptive wireless communication. However, in future 6G scenarios characterized by high-speed network entities and fast-changing environments, it is very challenging to meet real-time requirements. Although generative diffusion models (DMs) can achieve state-of-the-art accuracy with second-level delay, their iterative nature leads to prohibitive inference latency in delay-sensitive scenarios. In this paper, by uncovering a key structural property of diffusion processes: the latent midpoints remain highly consistent across semantically similar scenes, we propose RadioDiff-Flux, a novel two-stage latent diffusion framework that decouples static environmental modeling from dynamic refinement, enabling the reuse of precomputed midpoints to bypass redundant denoising. In particular, the first stage generates a coarse latent representation using only static scene features, which can be cached and shared across similar scenarios. The second stage adapts this representation to dynamic conditions and transmitter locations using a pre-trained model, thereby avoiding repeated early-stage computation. The proposed RadioDiff-Flux significantly reduces inference time while preserving fidelity. Experiment results show that RadioDiff-Flux can achieve up to 50 acceleration with less than 0.15% accuracy loss, demonstrating its practical utility for fast, scalable RM generation in future 6G networks.

cs.LG↗
arXiv2025

Velocity-Adaptive Access Scheme for Semantic-Aware Vehicular Networks: Joint Fairness and AoI Optimization

In this paper, we address the problem of fair access and Age of Information (AoI) optimization in 5G New Radio (NR) Vehicle to Everything (V2X) Mode 2. Specifically, vehicles need to exchange information with the road side unit (RSU). However, due to the varying vehicle speeds leading to different communication durations, the amount of data exchanged between different vehicles and the RSU may vary. This may poses significant safety risks in high-speed environments. To address this, we define a fairness index through tuning the selection window of different vehicles and consider the image semantic communication system to reduce latency. However, adjusting the selection window may affect the communication time, thereby impacting the AoI. Moreover, considering the re-evaluation mechanism in 5G NR, which helps reduce resource collisions, it may lead to an increase in AoI. We analyze the AoI using Stochastic Hybrid System (SHS) and construct a multi-objective optimization problem to achieve fair access and AoI optimization. Sequential Convex Approximation (SCA) is employed to transform the non-convex problem into a convex one, and solve it using convex optimization. We also provide a large language model (LLM) based algorithm. The scheme's effectiveness is validated through numerical simulations.

cs.NI↗
arXiv2025

RMSup: Physics-Informed Radio Map Super-Resolution for Compute-Enhanced Integrated Sensing and Communications

Radio maps (RMs) provide a spatially continuous description of wireless propagation, enabling cross-layer optimization and unifying communication and sensing for integrated sensing and communications (ISAC). However, constructing high-fidelity RMs at operational scales is difficult, since physics-based solvers are time-consuming and require precise scene models, while learning methods degrade under incomplete priors and sparse measurements, often smoothing away critical discontinuities. We present RMSup, a physics-informed super-resolution framework that functions with uniform sparse sampling and imperfect environment priors. RMSup extracts Helmholtz equation-informed boundary and singularity prompts from the measurements, fuses them with base-station side information and coarse scene descriptors as conditional inputs, and employs a boundary-aware dual-head network to reconstruct a high-fidelity RM and recover environmental contours jointly. Experimental results show the proposed RMsup achieves state-of-the-art performance both in RM construction and ISAC-related environment sensing.

eess.SP↗
arXiv2025

iRadioDiff: Physics-Informed Diffusion Model for Indoor Radio Map Construction and Localization

Radio maps (RMs) serve as environment-aware electromagnetic (EM) representations that connect scenario geometry and material properties to the spatial distribution of signal strength, enabling localization without costly in-situ measurements. However, constructing high-fidelity indoor RMs remains challenging due to the prohibitive latency of EM solvers and the limitations of learning-based methods, which often rely on sparse measurements or assumptions of homogeneous material, which are misaligned with the heterogeneous and multipath-rich nature of indoor environments. To overcome these challenges, we propose iRadioDiff, a sampling-free diffusion-based framework for indoor RM construction. iRadioDiff is conditioned on access point (AP) positions, and physics-informed prompt encoded by material reflection and transmission coefficients. It further incorporates multipath-critical priors, including diffraction points, strong transmission boundaries, and line-of-sight (LoS) contours, to guide the generative process via conditional channels and boundary-weighted objectives. This design enables accurate modeling of nonstationary field discontinuities and efficient construction of physically consistent RMs. Experiments demonstrate that iRadioDiff achieves state-of-the-art performance in indoor RM construction and received signal strength based indoor localization, which offers effective generalization across layouts and material configurations. Code is available at https://github.com/UNIC-Lab/iRadioDiff.

cs.LG↗