SearcharxivSearch

arXiv subjects

Nancy Aggarwal

Publications and source records attributed to Nancy Aggarwal.

At least 19 recordsLinked to original sources

The Two Orbital, Interacting Hatano-Nelson Model

The single orbital, one-dimensional, Hatano-Nelson Hamiltonian provides deep insight into the physics of non-Hermiticity, resulting from asymmetric left/right hopping, and its connections to localization. In the absence of disorder, its single particle eigenvalues $E_{\alpha}$ lie on an ellipse in the complex plane whose extent in the imaginary direction is controlled by the degree of asymmetry. When randomness is introduced, two sets of real eigenvalues emerge at the extremes of the largest and smallest real part of $E_{\alpha}$. These real eigenvalues are associated with localized eigenvectors. For spinless fermions, increasing near-neighbor interactions first cause a transition to a charge density wave phase, and ultimately, on finite lattices, a collapse of all eigenvalues to the real axis. In this paper, we explore the presence of real eigenvalues in the interacting, two-particle sector for the spinful case (Hubbard model) in a two-chain (two-band) geometry with a Hermitian interchain hopping. Our key results are to obtain the ``phase" diagrams for the existence of a purely real spectrum, as a function of the interaction strength, degree of non-Hermiticity, and interchain hopping. We study the sensitivity to boundary conditions of the spectral properties of our two-chain model with winding number analysis and explore the relationship between PBC doublon states and OBC skin modes. To address the question of stability in such non-equilibrium systems, we solve the dynamics at low filling according to Lindbladian evolution and find that the non-Hermitian description is able to qualitatively describe such systems.

cond-mat.str-el

Gravitational wave signal and noise response of an optically levitated sensor in a Fabry-P\'erot cavity

Optically levitated sensors inside a Fabry-P\'erot cavity have been proposed for high-frequency gravitational-wave (GW) detection, though their configuration for gravitational wave sensitivity exhibits counterintuitive features. We provide a new detailed general relativistic derivation of the interaction between a gravitational wave and a levitated object in an optical cavity, demonstrating gauge independence of the observable response. We find a strong asymmetric dependence of the strain signal on trap position, maximized when the sensor is located near the input mirror, and provide an in-depth explanation of its origin from multiple gauge perspectives. A key new result of this work is the consequence of this asymmetry on the noise coupling: the coupling of input-mirror displacements to the strain signal can be highly suppressed relative to that of end-mirror displacements and common-mode mirror motion. These results clarify the physical origin of the gravitational wave interaction with such a sensor and establish crucial design principles for optical levitation based high-frequency GW detectors.

gr-qc

Challenges and Opportunities of Gravitational Wave Searches above 10 kHz

The first direct measurement of gravitational waves by the LIGO and Virgo collaborations has opened up new avenues to explore our Universe. This white paper outlines the challenges and gains expected in gravitational-wave searches at frequencies above the LIGO/Virgo band. The scarcity of possible astrophysical sources in most of this frequency range provides a unique opportunity to discover physics beyond the Standard Model operating both in the early and late Universe, and we highlight some of the most promising of these sources. We review several detector concepts that have been proposed to take up this challenge, and compare their expected sensitivity with the signal strength predicted in various models. This report is the summary of a series of workshops on the topic of high-frequency gravitational wave detection, held in 2019 (ICTP, Trieste, Italy), 2021 (online) and 2023 (CERN, Geneva, Switzerland).

gr-qc

Simulating the Galactic population of axion clouds around stellar-origin black holes: Gravitational wave signals in the 10-100 kHz band

Ultralight scalar fields can experience runaway `superradiant' amplification near spinning black holes, resulting in a macroscopic `axion cloud' which slowly dissipates via continuous monochromatic gravitational waves. For a particular range of boson masses, $\mathcal{O}(10^{-11}$ -- $10^{-10})$ eV, an axion cloud will radiate in the $10$ -- $100$ kHz band of the Levitated Sensor Detector (LSD). Using fiducial models of the mass, spin, and age distributions of stellar-origin black holes, we simulate the present-day Milky Way population of these hypothetical objects. As a first step towards assessing the LSD's sensitivity to the resultant ensemble of GW signals, we compute the corresponding signal-to-noise ratios which build up over a nominal integration time of $10^{7}$ s, assuming the projected sensitivity of the $1$-m LSD prototype currently under construction, as well as for future $10$-m and $100$-m concepts. For a $100$-m cryogenic instrument, hundreds of resolvable signals could be expected if the boson mass $\mu$ is around $3\times10^{-11}$ eV, and this number diminishes with increasing $\mu$ up to $\approx 5.5\times10^{-11}$ eV. The much larger population of unresolved sources will produce a confusion foreground which could be detectable by a $10$-m instrument if $\mu \in (3-4.5)\times10^{-11}$ eV, or by a $100$-m instrument if $\mu \in (3-6)\times10^{-11}$ eV.

astro-ph.HE

Method to search for inspiraling planetary-mass ultra-compact binaries using the generalized frequency-Hough transform in LIGO O3a data

Gravitational waves from sub-solar mass primordial black holes could be detected in LIGO, Virgo and KAGRA data. Here, we apply a method originally designed to look for rapidly spinning-down neutron stars, the generalized frequency-Hough transform, to search for planetary-mass primordial black holes using data from the first half of the third observing run of advanced LIGO. In this companion paper to arXiv:2402.19468, in which the main results of our search are presented, we delve into the details of the search methodology, the choices we have made regarding the parameter space to explore, the follow-up procedure we use to confirm or reject possible candidates returned in our search, and a comparison of our analytic procedure of generating upper limits to those obtained through injections.

astro-ph.IM

Gravitational wave constraints on planetary-mass primordial black holes using LIGO O3a data

Gravitational waves from sub-solar mass inspiraling compact objects would provide almost smoking-gun evidence for primordial black holes (PBHs). We perform the first search for inspiraling planetary-mass compact objects in equal-mass and highly asymmetric mass-ratio binaries using data from the first half of the LIGO-Virgo-KAGRA third observing run. Though we do not find any significant candidates, we determine the maximum luminosity distance reachable with our search to be of $O(0.1-100)$ kpc, and corresponding model-independent upper limits on the merger rate densities to be $O(10^{3}-10^{-7})$ kpc$^{-3}$yr$^{-1}$ for systems with chirp masses of $O(10^{-4}-10^{-2})M_\odot$, respectively. Furthermore, we interpret these rate densities as arising from PBH binaries and constrain the fraction of dark matter that such objects could comprise. For equal-mass PBH binaries, we find that these objects would compose less than 4-100% of DM for PBH masses of $10^{-2}M_\odot$ to $2\times 10^{-3}M_\odot$, respectively. For asymmetric binaries, assuming one black hole mass corresponds to a peak in the mass function at 2.5$M_\odot$, a PBH dark-matter fraction of 10% and a second, much lighter PBH, we constrain the mass function of the second PBH to be less than 1 for masses between $1.5\times 10^{-5}M_\odot$ and $2\times 10^{-4}M_\odot$. Our constraints, released on Zenodo, are robust enough to be applied to any PBH or exotic compact object binary formation models, and complement existence microlensing results. More details about our search can be found in our companion paper.

gr-qc

Advanced LIGO, LISA, and Cosmic Explorer as dark matter transducers

We present a method to search for scalar field ultralight dark matter directly interacting with gravitational-wave interferometers via a modulation of the fine structure constant and the electron mass. This modulation induces an effective strain in solid materials at a frequency determined by the mass of the dark matter particle. We study the prospects for looking for such an effect in the LIGO detectors by using the solid cavity which is nominally used for pre-stabilizing the laser frequency and we project upper limits. We contextualize them with previous limits from GEO600, possible limits from a similar strain in the LIGO beamsplitter, and with potential limits from upcoming experiments like LISA, Cosmic Explorer and from an upgraded solid cavity. We find that with the sensitivity of Advanced LIGO, competitive upper limits on DM coupling can be placed at the level of $\left\vert d_{m_e}+d_e\right\vert \sim 0.2$ for $m_\text{DM} \sim 10^{-13}\,\mathrm{eV}/\mathrm{c}^2$ with a combination of two searches using the solid cavity and the beamsplitter in LIGO; future experiments could reduce this upper limit to $\sim10^{-3}$.

hep-ex

Surpassing the Standard Quantum Limit using an Optical Spring

Quantum mechanics places noise limits and sensitivity restrictions on physical measurements. The balance between unwanted backaction and the precision of optical measurements impose a standard quantum limit (SQL) on interferometric systems. In order to realize a sensitivity below the SQL, it is necessary to leverage a back-action evading measurement technique, or else exploit cancellations of any excess noise contributions at the detector. %Many proof of principle experiments have been performed, but only recently has an experiment achieved sensitivity below the SQL. In this work, we extend that initial demonstration and realize sub-SQL measurement sensitivity nearly two times better than previous measurements, and with architecture applicable to interferometric gravitational wave detectors. In fact, this technique is directly applicable to Advanced LIGO, which could observe similar effects with a detuned signal recycling cavity. By exploiting quantum correlations created by an optical spring, we measure a total sensitivity below the SQL by $\textbf{2.8}$ dB, corresponding to a reduction in the noise power by $\textbf{72}\pm\textbf{5.1}$ \% below the quantum limit. Through the use of a detuned optical spring, this noise reduction is tunable, allowing us to choose the desired range of frequencies that fall below the SQL. This result demonstrates access to sensitivities well below the SQL at frequencies ranges applicable to LIGO, with the potential to extend the reach of gravitational wave detectors further into the universe.

quant-ph

Optical trapping of high-aspect-ratio NaYF hexagonal prisms for kHz-MHz gravitational wave detectors

We present experimental results on optical trapping of Yb-doped $\beta-$NaYF sub-wavelength-thickness high-aspect-ratio hexagonal prisms with a micron-scale radius. The prisms are trapped in vacuum using an optical standing wave, oriented with the normal vector to their face along the beam propagation direction, and exhibit characteristic modes of three translational and two torsional degrees of freedom. The measured motional spectra are compared with numerical simulations. This plate-like geometry simultaneously enables trapping with low photon-recoil-heating, high mass, and high trap frequency, potentially leading to advances in high frequency gravitational wave searches in the Levitated Sensor Detector (LSD), currently under construction. The material used here has previously been shown to exhibit internal cooling via laser refrigeration when optically trapped and illuminated with light of suitable wavelength. Employing such laser refrigeration methods in the context of our work may enable higher trapping intensity thus and higher trap frequencies for gravitational wave searches approaching the several hundred kHz range.

physics.optics

Passive Laser Power Stabilization via an Optical Spring

Metrology experiments can be limited by the noise produced by the laser involved via small fluctuations in the laser's power or frequency. Typically, active power stabilization schemes consisting of an in-loop sensor and a feedback control loop are employed. Those schemes are fundamentally limited by shot noise coupling at the in-loop sensor. In this letter we propose to use the optical spring effect to passively stabilize the classical power fluctuations of a laser beam. In a proof of principle experiment, we show that the relative power noise of the laser is stabilized from approximately $2 \times 10^{-5}$ Hz$^{-1/2}$ to a minimum value of $1.6 \times 10^{-7}$ Hz$^{-1/2}$, corresponding to the power noise reduction by a factor of $125$. The bandwidth at which stabilization occurs ranges from $400$ Hz to $100$ kHz. The work reported in this letter further paves the way for high power laser stability techniques which could be implemented in optomechanical experiments and in gravitational wave detectors.

physics.optics

Constraints on planetary and asteroid-mass primordial black holes from continuous gravitational-wave searches

We present new constraints on the merging rates of planetary-mass and asteroid-mass primordial black hole binaries using limits on continuous waves(quasi-monochromatic, quasi-infinite duration signals) derived from an all-sky search for isolated compact objects in the first six months of the third observing run (O3a) of LIGO/Virgo. We calculate the merging rates of these binaries in a model-independent way, and convert them to constraints on the primordial black hole abundance with minimal modelling assumptions. Our results show that we are sensitive to sources at most $\mathcal{O}(10$ pc) away for systems with chirp masses of $\mathcal{O}(10^{-5}M_\odot)$ at gravitational-wave frequencies around 30-40 Hz. These results also show that continuous-wave searches could in the future directly probe the existence of planetary-mass and asteroid-mass primordial black holes, especially those in binaries with asymmetric mass ratios. Furthermore, they demonstrate that new methods accounting for the full nonlinear gravitational-wave frequency evolution are needed to improve constraints on primordial black holes.

gr-qc

Characterization of magnetic field noise in the ARIADNE source mass rotor

ARIADNE is a nuclear-magnetic-resonance-based experiment that will search for novel axion-induced spin-dependent interactions between an unpolarized source mass rotor and a nearby sample of spin-polarized $^3$He gas. To detect feeble axion signals at the sub-atto-Tesla level, the experiment relies on low magnetic background and noise. We measure and characterize the magnetic field background from a prototype tungsten rotor. We show that the requirement is met with our current level of tungsten purity and demagnetization process. We further show that the noise is dominantly caused by a few discrete dipoles, likely due to a few impurities trapped inside the rotor during manufacturing. This is done via a numerical optimization pipeline which fits for the locations and magnetic moments of each dipole. We find that under the current demagnetization, the magnetic moment of trapped impurities is bounded at $10^{-9} \mathrm{A}\mathrm{m}^2$.

physics.ins-det

Source mass characterization in the ARIADNE axion experiment

The Axion Resonant InterAction Detection Experiment (ARIADNE) is a collaborative effort to search for the QCD axion using nuclear magnetic resonance (NMR), where the axion acts as a mediator of spin-dependent forces between an unpolarized tungsten source mass and a sample of polarized helium-3 gas. Since the experiment involves precision measurement of a small magnetization, it relies on limiting ordinary magnetic noise with superconducting magnetic shielding. In addition to the shielding, proper characterization of the noise level from other sources is crucial. We investigate one such noise source in detail: the magnetic noise due to impurities and Johnson noise in the tungsten source mass.

physics.ins-det

Searching for new physics with a levitated-sensor-based gravitational-wave detector

The Levitated Sensor Detector (LSD) is a compact resonant gravitational-wave (GW) detector based on optically trapped dielectric particles that is under construction. The LSD sensitivity has more favorable frequency scaling at high frequencies compared to laser interferometer detectors such as LIGO. We propose a method to substantially improve the sensitivity by optically levitating a multi-layered stack of dielectric discs. These stacks allow the use of a more massive levitated object while exhibiting minimal photon recoil heating due to light scattering. Over an order of magnitude of unexplored frequency space for GWs above 10 kHz is accessible with an instrument 10 to 100 meters in size. Particularly motivated sources in this frequency range are gravitationally bound states of QCD axions with decay constant near the grand unified theory (GUT) scale that form through black hole superradiance and annihilate to GWs. The LSD is also sensitive to GWs from binary coalescence of sub-solar-mass primordial black holes and as-yet unexplored new physics in the high-frequency GW window.

gr-qc

A room temperature optomechanical squeezer

One of the noise sources that currently limits gravitational wave (GW) detectors comes from the quantum nature of the light causing uncertain amplitude and phase. Phase uncertainty limits the precision of an interferometric measurement. This measurement is also subject to quantum back-action, caused by the radiation pressure force fluctuations produced by the amplitude uncertainty (QRPN). In order to lower this quantum noise, GW detectors plan to use squeezed light injection. In this thesis, I focus on using radiation-pressure-mediated optomechanical (OM) interaction to generate squeezed light. Creating squeezed states by using OM interaction enables wavelength-independent squeezed light sources that may also be more compact and robust than traditionally used non-linear crystals. We analyze the system with realistic imperfections (losses & classical noise), and use the concepts to design an experiment to obtain the most possible squeezing in a broad audio-frequency band at room temperature. This involves an optimization for the optical properties of the cavity and the mechanical properties of the oscillator. We then show its experimental implementation, and subsequent observation of QRPN as well as OM squeezing. These are the first ever direct observations of a room temperature oscillator's motion being overwhelmed by vacuum fluctuations. This is shown in the low frequency band, which is relevant to GW detectors, but poses its own technical challenges, and hence has not been done before. Being in the back-action dominated regime along with optimized optical properties has also enabled us to observe OM squeezing. That is the first direct observation of quantum noise suppression in a room temperature OM system. It is also the first direct evidence of quantum correlations in the audio frequency band, in a broad band at non-resonant frequencies.

quant-ph

The US Program in Ground-Based Gravitational Wave Science: Contribution from the LIGO Laboratory

Recent gravitational-wave observations from the LIGO and Virgo observatories have brought a sense of great excitement to scientists and citizens the world over. Since September 2015,10 binary black hole coalescences and one binary neutron star coalescence have been observed. They have provided remarkable, revolutionary insight into the "gravitational Universe" and have greatly extended the field of multi-messenger astronomy. At present, Advanced LIGO can see binary black hole coalescences out to redshift 0.6 and binary neutron star coalescences to redshift 0.05. This probes only a very small fraction of the volume of the observable Universe. However, current technologies can be extended to construct "$3^\mathrm{rd}$ Generation" (3G) gravitational-wave observatories that would extend our reach to the very edge of the observable Universe. The event rates over such a large volume would be in the hundreds of thousands per year (i.e.tens per hour). Such 3G detectors would have a 10-fold improvement in strain sensitivity over the current generation of instruments, yielding signal-to-noise ratios of 1000 for events like those already seen. Several concepts are being studied for which engineering studies and reliable cost estimates will be developed in the next 5 years.

astro-ph.IM

Room temperature optomechanical squeezing

The radiation-pressure driven interaction of a coherent light field with a mechanical oscillator induces correlations between the amplitude and phase quadratures of the light. These correlations result in squeezed light -- light with quantum noise lower than shot noise in some quadratures, and higher in others. Due to this lower quantum uncertainty, squeezed light can be used to improve the sensitivity of precision measurements. In particular, squeezed light sources based on nonlinear optical crystals are being used to improve the sensitivity of gravitational wave (GW) detectors. For optomechanical squeezers, thermally driven fluctuations of the mechanical oscillator's position makes it difficult to observe the quantum correlations at room temperature, and at low frequencies. Here we present a measurement of optomechanically (OM) squeezed light, performed at room-temperature, in a broad band near audio-frequency regions relevant to GW detectors. We observe sub-poissonian quantum noise in a frequency band of 30 kHz to 70 kHz with a maximum reduction of 0.7 $\pm$ 0.1 dB below shot noise at 45 kHz. We present two independent methods of measuring this squeezing, one of which does not rely on calibration of shot noise.

quant-ph

Observation of a room-temperature oscillator's motion dominated by quantum fluctuations over a broad audio-frequency band

We report on the broadband measurement of quantum radiation pressure noise (QRPN) in an optomechanical cavity at room temperature over a broad range of frequencies relevant to gravitational-wave detectors. We show that QRPN drives the motion of a high-reflectivity single-crystal microresonator, which serves as one mirror of a Fabry-Perot cavity. In our measurements QRPN dominates over all other noise between 10 kHz and 50 kHz and scales as expected with the circulating power inside the cavity. The thermal noise of the microresonator, the largest noise source next to the QRPN, is measured and shown to agree with a structural damping model from 200 Hz to 30 kHz. By observing the effects of QRPN in the audio-band, we now have a testbed for studying techniques to mitigate back-action, such as variational readout and squeezed light injection, that could be used to improve the sensitivity of gravitational-wave detectors.

quant-ph