arXiv subjects

Nanfang Yu

Publications and source records attributed to Nanfang Yu.

28 records · Page 2Linked to original sources

arXiv2020

Multifunctional Nonlocal Metasurfaces

Diffractive photonic devices manipulate light via local and nonlocal optical modes. Local devices, such as metasurfaces, can shape a wavefront at multiple selected wavelengths, but inevitably modify light across the spectrum; nonlocal devices, such as grating filters, offer great frequency selectivity but limited spatial control. Here, we introduce a rational design paradigm using quasi-bound states in the continuum to realize multifunctional nonlocal devices: metasurfaces that produce narrowband spatially tailored wavefronts at multiple selected wavelengths and yet are otherwise transparent.

physics.optics↗

arXiv2020

Physical and Behavioral Adaptations to Prevent Overheating of the Living Wings of Butterflies

The wings of Lepidoptera contain a matrix of living cells whose function requires appropriate temperatures. However, given their small thermal capacity, wings can overheat rapidly in the sun. Here we analyze butterfly wings across a wide range of simulated environmental conditions, and find that regions containing living cells are maintained at cooler temperatures. Diverse scale nanostructures and non-uniform cuticle thicknesses create a heterogeneous distribution of radiative cooling that selectively reduces the temperature of structures such as wing veins and androconial organs. These tissues are supplied by circulatory, neural and tracheal systems throughout the adult lifetime, indicating that the insect wing is a dynamic, living structure. Behavioral assays show that butterflies use wings to sense visible and infrared radiation, responding with specialized behaviors to prevent overheating of their wings. Our work highlights the physiological importance of wing temperature and how it is exquisitely regulated by structural and behavioral adaptations.

physics.bio-ph↗

arXiv2019

Dielectric Metasurfaces for Complete and Independent Control of Optical Amplitude and Phase

Metasurfaces are optically thin metamaterials that promise complete control of the wavefront of light but are primarily used to control only the phase of light. Here, we present an approach, simple in concept and in practice, that uses meta-atoms with a varying degree of form birefringence and rotation angles to create high-efficiency dielectric metasurfaces that control both the optical amplitude and phase at one or two frequencies. This opens up applications in computer-generated holography, allowing faithful reproduction of both the phase and amplitude of a target holographic scene without the iterative algorithms required in phase-only holography. We demonstrate all-dielectric metasurface holograms with independent and complete control of the amplitude and phase at up to two optical frequencies simultaneously to generate two- and three-dimensional holographic objects. We show that phase-amplitude metasurfaces enable a few features not attainable in phase-only holography; these include creating artifact-free two-dimensional holographic images, encoding phase and amplitude profiles separately at the object plane, encoding intensity profiles at the metasurface and object planes separately, and controlling the surface textures of three-dimensional holographic objects.

physics.optics↗

arXiv2019

Li4Ti5O12: A Visible-to-Infrared Broadband Electrochromic Material for Optical and Thermal Management

Broadband electrochromism from visible to infrared wavelengths is attractive for applications like smart windows, thermal-camouflage, and temperature control. In this work, the broadband electrochromic properties of Li4Ti5O12 (LTO) and its suitability for infrared-camouflage and thermoregulation are investigated. Upon Li+ intercalation, LTO changes from a wide band-gap semiconductor to a metal, causing LTO nanoparticles on metal to transition from a super-broadband optical reflector to a solar absorber and thermal emitter. Large tunabilities of 0.74, 0.68 and 0.30 are observed for the solar reflectance, mid-wave infrared (MWIR) emittance and long-wave infrared (LWIR) emittance respectively. The values exceed, or are comparable to notable performances in the literature. A promising cycling stability is also observed. MWIR and LWIR thermography reveal that the emittance of LTO-based electrodes can be electrochemically tuned to conceal them amidst their environment. Moreover, under different sky conditions, LTO shows promising solar heating and sub-ambient radiative cooling capabilities depending on the degree of lithiation and device design. The demonstrated capabilities of LTO make LTO-based electrochromic devices highly promising for infrared-camouflage applications in the defense sector, and for thermoregulation in space and terrestrial environments.

physics.optics↗

arXiv2018

Scalable, "Dip-and-dry" Fabrication of a Wide-Angle Plasmonic Selective Absorber for High-efficiency Solar-Thermal Energy Conversion

A galvanic displacement reaction-based, room-temperature "dip-and-dry" technique is demonstrated for fabricating selectively solar-absorbing plasmonic nanostructure-coated foils (PNFs). The technique, which allows for facile tuning of the PNFs' spectral reflectance to suit different radiative and thermal environments, yields PNFs which exhibit excellent, wide-angle solar absorptance (0.96 at 15°, to 0.97 at 35°, to 0.79 at 80°) and low hemispherical thermal emittance (0.10) without the aid of antireflection coatings. The thermal emittance is on par with those of notable selective solar absorbers (SSAs) in the literature, while the wide-angle solar absorptance surpasses those of previously reported SSAs with comparable optical selectivities. In addition, the PNFs show promising mechanical and thermal stabilities at temperatures of up to 200°C. Along with the performance of the PNFs, the simplicity, inexpensiveness and environment-friendliness of the "dip-and-dry" technique makes it an appealing alternative to current methods for fabricating selective solar absorbers.

physics.app-ph↗

arXiv2017

Metasurface-assisted phase-matching-free second harmonic generation in lithium niobate waveguides

The phase-matching condition is a key aspect in nonlinear wavelength conversion processes, which requires the momenta of the photons involved in the processes to be conserved. Conventionally, nonlinear phase matching is achieved using either birefringent or periodically poled nonlinear crystals, which requires careful dispersion engineering and are usually narrowband. In recent years, metasurfaces consisting of densely packed arrays of optical antennas have been demonstrated to provide an effective optical momentum to bend light in arbitrary ways. Here, we demonstrate that gradient metasurface structures consisting of phased array antennas are able to circumvent the phase-matching requirement in on-chip nonlinear wavelength conversion. We experimentally demonstrate phase-matching-free second harmonic generation over many coherent lengths in thin film lithium niobate waveguides patterned with the gradient metasurfaces. Efficient second-harmonic generation (1660% W-1cm-2) in the metasurface-based devices was observed over a wide range of pump wavelengths (1580-1650 nm).

physics.optics↗

arXiv2016

A review of metasurfaces: physics and applications

Metamaterials are composed of periodic subwavelength metal/dielectric structures that resonantly couple to the electric and/or magnetic components of the incident electromagnetic fields, exhibiting properties that are not found in nature. Planar metamaterials with subwavelength thickness, or metasurfaces, consisting of single-layer or few-layer stacks of planar structures, can be readily fabricated using lithography and nanoprinting methods, and the ultrathin thickness in the wave propagation direction can greatly suppress the undesirable losses. Metasurfaces enable a spatially varying optical response, mold optical wavefronts into shapes that can be designed at will, and facilitate the integration of functional materials to accomplish active control and greatly enhanced nonlinear response. This paper reviews recent progress in the physics of metasurfaces operating at wavelengths ranging from microwave to visible. We provide an overview of key metasurface concepts such as anomalous reflection and refraction, and introduce metasurfaces based on the Pancharatnam-Berry phase and Huygens' metasurfaces, as well as their use in wavefront shaping and beam forming applications, followed by a discussion of polarization conversion in few-layer metasurfaces and their related properties. An overview of dielectric metasurfaces reveals their ability to realize unique functionalities coupled with Mie resonances and their low ohmic losses. We also describe metasurfaces for wave guidance and radiation control, as well as active and nonlinear metasurfaces. Finally, we conclude by providing our opinions of opportunities and challenges in this rapidly developing research field.

physics.optics↗

arXiv2016

High efficiency near diffraction-limited mid-infrared flat lenses based on metasurface reflectarrays

A limiting factor in the development of mid-infrared optics is the lack of abundant materials that are transparent, low cost, lightweight, and easy to machine. In this paper, we demonstrate a metasurface device that circumvents these limitations. A flat lens based on antenna reflectarrays was designed to achieve near diffraction-limited focusing with a high efficiency (experiment: 80%, simulation: 83%) at 45(o) incidence angle at λ = 4.6 μm. This geometry considerably simplifies the experimental arrangement compared to the common geometry of normal incidence which requires beam splitters. Simulations show that the effect of comatic aberrations is small compared to parabolic mirrors. The use of single-step photolithography allows large scale fabrication.

physics.optics↗

arXiv2012

Aberration-free ultra-thin flat lenses and axicons at telecom wavelengths based on plasmonic metasurfaces

The concept of optical phase discontinuities is applied to the design and demonstration of aberration-free planar lenses and axicons, comprising a phased array of ultrathin subwavelength spaced optical antennas. The lenses and axicons consist of radial distributions of V-shaped nanoantennas that generate respectively spherical wavefronts and non-diffracting Bessel beams at telecom wavelengths. Simulations are also presented to show that our aberration-free designs are applicable to high numerical aperture lenses such as flat microscope objectives.

physics.optics↗

arXiv2012

Giant birefringence in optical antenna arrays with widely tailorable optical anisotropy

The manipulation of light by conventional optical components such as a lenses, prisms and wave plates involves engineering of the wavefront as it propagates through an optically-thick medium. A new class of ultra-flat optical components with high functionality can be designed by introducing abrupt phase shifts into the optical path, utilizing the resonant response of arrays of scatters with deeply-subwavelength thickness. As an application of this concept, we report a theoretical and experimental study of birefringent arrays of two-dimensional (V- and Y-shaped) optical antennas which support two orthogonal charge-oscillation modes and serve as broadband, anisotropic optical elements that can be used to locally tailor the amplitude, phase, and polarization of light. The degree of optical anisotropy can be designed by controlling the interference between the light scattered by the antenna modes; in particular, we observe a striking effect in which the anisotropy disappears as a result of destructive interference. These properties are captured by a simple, physical model in which the antenna modes are treated as independent, orthogonally-oriented harmonic oscillators.

physics.optics↗