arXiv subjects

Nanshun Huang

Publications and source records attributed to Nanshun Huang.

17 recordsLinked to original sources

arXiv2026

Towards Cavity-Based X-ray Free-Electron Lasers: Milestones and Challenges

Cavity-based X-ray free-electron lasers (CBXFELs) could advance X-ray science by delivering fully coherent radiation with high spectral brightness and enhanced pulse control, addressing the limitations of conventional self-amplified spontaneous emission paradigms. Recent experiments at the European XFEL have demonstrated spectral narrowing and proof-of-concept multi-pass amplification, marking the first experimental signature of the tightly coupled three-body interaction between relativistic electron beams, FEL gain dynamics, and high-finesse Bragg cavities. This review consolidates advances in CBXFEL theory built on this framework, global R$\&$D efforts, and outstanding technical challenges arising from the coupled system. CBXFELs support applications in X-ray spectroscopy, quantum optics, and precision metrology. Future directions prioritize CBXFEL stabilization, X-ray comb generation, and applications in coherent quantum control of nuclear transitions.

physics.acc-ph↗

arXiv2026

Theoretical and experimental studies of energy modulation to demodulation in seeded free-electron lasers

Laser manipulation plays a critical role in precisely tailoring relativistic electron beams through energy modulation, enabling the generation of coherent, intense, and ultrashort radiation in accelerator-based light sources such as synchrotron radiation facilities and free-electron lasers (FELs). However, laser-induced energy modulation inevitably degrades electron beam quality by increasing the energy spread, thereby limiting high-repetition-rate operation. Here, we investigate energy modulation and demodulation in a seeded FEL using two modulators separated by a tunable phase shifter. Analytical analysis and three-dimensional simulations show that a $π$ phase delay can nearly reverse the laser-beam interaction and substantially suppress the residual modulation. Diagnostics based on coherent undulator radiation and time-resolved measurements are established to characterize weak residual modulation, and a dedicated demodulation undulator is designed for controlled studies. Preliminary experiments performed at the Shanghai soft X-ray FEL facility using the existing seeding beamline demonstrate laser-induced energy-modulation suppression. Together with the analytical and numerical studies, these results establish a practical framework for investigating the transition from energy modulation to demodulation in seeded FELs, with potential applications in high-repetition-rate, fully coherent X-ray sources with improved preservation of electron beam quality.

physics.acc-ph↗

arXiv2026

Advanced Externally Seeded FEL Schemes for High-Repetition-Rate Operation at SHINE

Externally seeded free-electron lasers (FELs) are promising approaches for generating fully coherent soft-X-ray radiation. Their extension to shorter wavelengths and MHz-level repetition rates is, however, constrained by the limited availability of high-repetition-rate seed lasers with sufficient energy modulation. Recent self-amplification and direct-amplification experiments at the Shanghai Soft X-ray FEL facility have significantly relaxed the peak-power requirement for high-gain harmonic generation (HGHG) and opened a practical path toward echo-enabled harmonic generation (EEHG). Using the SHINE bypass line, three compatible high-repetition-rate seeded-FEL configurations are explored: self-modulation cascaded HGHG, self-modulation EEHG, and direct-amplification-driven EEHG. Numerical simulations indicate that these schemes can provide flexible routes toward MHz-level operation with harmonic generation beyond the 30th order. A common modulator-chicane layout is proposed to preserve compatibility among the candidate modes and to support future optimization and experimental implementation at SHINE.

physics.acc-ph↗

arXiv2026

Fully coherent short wavelength free-electron laser driven by a single sub-microjoule seed

High-repetition-rate, fully coherent extreme-ultraviolet (EUV) and X-ray free-electron lasers (FELs) are essential for advanced time-resolved ultrafast spectroscopies. While external seeding serves as the standard technique to achieve precise temporal coherence, conventional methods demand hundred-megawatt peak-power laser systems. Furthermore, advanced configurations like echo-enabled harmonic generation (EEHG) introduce the severe complexities of dual-laser synchronization. Together, these requirements fundamentally restrict operations to kilohertz repetition rates and compromise overall system stability. Here, we experimentally demonstrate a fully coherent EEHG-FEL driven by a single, sub-microjoule seed laser. By employing a direct-amplification enabled harmonic generation technique, we utilize an initial 0.4 microJ (2 MW peak power) ultraviolet seed to directly drive coherent lasing at nanometer wavelengths. By eliminating the need for extreme peak powers and multiple synchronized lasers, this approach significantly simplifies the seeding architecture and provides a practical and robust pathway toward megahertz-class, fully coherent EUV and X-ray light sources.

physics.acc-ph↗

arXiv2026

High-power beyond extreme ultraviolet FEL radiation with flexible polarization at SHINE

Linac-based free-electron lasers (FELs) feature high brightness, narrow bandwidth, controllable polarization, and wide wavelength tunability. With the rapid development of superconducting radio-frequency technology, linacs can now operate at MHz-level repetition rates, enabling FELs with both high repetition rates and high average power. Beyond extreme ultraviolet (BEUV) radiation is of great interest for scientific research and industrial applications, especially for next-generation lithography. Owing to the main design parameters of SHINE, the generation of BEUV radiation is a natural capability of the facility. The BEUV characteristics at SHINE are investigated and its achievable performance as a high-average-power light source is evaluated. By applying undulator tapering to enhance the energy extraction efficiency, kilowatt-level BEUV radiation with controllable polarization is shown to be achievable. These results demonstrate that SHINE can provide a high-performance BEUV source, offering a realistic pathway toward a high-average-power light source for next-generation high-resolution lithography.

physics.acc-ph↗

arXiv2026

Multi-color XFEL pulses with variable color separation and time delay for multi-frame diffraction imaging

X-ray free-electron lasers (XFELs) of high brightness have opened new opportunities for exploring ultrafast dynamical processes in matter, enabling imaging and movies of single molecules and particles at atomic resolution. In this paper, we present a straightforward method for multi-frame diffraction imaging, using the same electron beam to generate four-color XFEL pulses with adjustable wavelength separation and time delay. The optical klystron scheme is introduced to enhance FEL intensity and reduce the total length of undulators. The time delay is tuned via a magnetic chicane between the undulators with various colors. Using parameters of SHINE, start-to-end simulations demonstrate the effectiveness and tunability of our method, achieving representative results such as time delays of hundreds of femtoseconds and four-color XFEL pulses spanning 1.8 to 2.7 nm with 0.3 nm intervals. The proposed scheme enables the recording of multi-frame diffraction images in a single exposure, providing a new perspective for ultrafast molecular and atomic dynamics studies.

physics.acc-ph↗

arXiv2025

Spectral Control of a Cavity-Based X-ray Free-Electron Laser via Active Mode Locking

Precise spectral control in the hard X-ray regime remains a long-standing challenge that limits applications in atomic-scale science and ultrafast spectroscopy. We present an actively mode-locked cavity-based X-ray free-electron laser that achieves deterministic spectral programmability with phase-locked pulse trains and comb-like spectra, by coherently modulating the electron-beam energy. Three-dimensional time-dependent simulations predict \SI{700}{\micro\joule} total energy, \SI{30}{\giga\watt} peak power, and frequency-comb spacing of \SI{1.55}{\electronvolt} set by the modulation frequency. We further develop selective single-line amplification via undulator tapering and absolute frequency positioning through modulation-laser tuning with better than $2 \times 10^{-5}$ relative precision. Importantly, stable mode-locked operation persists under >80\% peak-to-peak cavity-reflectivity variations, substantially relaxing requirements on X-ray optics. These results establish active mode locking as a practical route to fully coherent, spectrally agile hard X-ray sources and enable new opportunities in time-resolved core-level spectroscopy, X-ray quantum optics, and precision metrology.

physics.acc-ph↗

arXiv2025

First Lasing and Stable Operation of a Direct-Amplification Enabled Harmonic Generation Free-Electron laser

Seeded free-electron lasers (FELs) capable of operating at repetition rates up to the MHz level are in high demand for advanced time-resolved spectroscopies, which require both full longitudinal coherence and high average photon flux in the extreme ultraviolet (EUV) and x-ray regimes. However, conventional external-seed laser systems cannot sustain MHz operation with sufficient hundreds of megawatts peak power requirement due to their limited total power. Here, we report the first lasing and stable operation of a direct-amplification-enabled harmonic generation FEL driven by a weak seed laser with MW-level peak power. Beginning with an ultraviolet seed laser with only 0.75 μJ pulse energy, we demonstrate its direct amplification to over 10 μJ within an 8-meter-long modulator. We observe coherent harmonic generation up to the 12th harmonic of the seed and achieve saturation of the 7th harmonic in the radiator. These results represent a crucial milestone toward the realization of MHz-class, fully coherent EUV and x-ray light sources.

physics.acc-ph↗

arXiv2025

Cavity-based compact light source for extreme ultraviolet lithography

A critical technology for high-volume manufacturing of nanoscale integrated circuits is a high-power extreme ultraviolet (EUV) light source. Over the past decades, laser-produced plasma (LPP) sources have been actively utilized in this field. However, current LPP light sources may provide insufficient average power to enable future manufacturing at the 3 nm node and below. In this context,accelerator-based light sources are being considered as promising tools for EUV lithography. This paper proposes a regenerative amplifier free-electron laser EUV source with harmonic lasing, drivenby a superconducting energy-recovery linac (ERL). By utilizing the nth harmonic, the required electron beam energy is reduced to 1/sqrt(n) of that in conventional schemes. The proposed configuration, employing an electron beam energy of approximately 0.33 GeV with a short-period (16 mm) undulator, is estimated to provide an average EUV power of about 2 kW. This approach significantly reduces the required electron energy and facility size relative to other accelerator-based proposals,thereby offering new possibilities for constructing high-power EUV sources with low-energy ERLs.

physics.acc-ph↗

arXiv2023

Rapidly Switchable X-ray Angular Momentum from a Free Electron Laser Oscillator

X-ray vortices carrying tunable Orbital Angular Momentum (OAM) are an emerging tool for X-ray characterization technology. However, in contrast to the generation of vortex beams in the visible wavelength region, the generation of X-ray vortices in a controlled manner has proved challenging. Here, we overcome this challenge using an X-ray free-electron laser oscillator (XFELO), which can produce intense coherent X-rays with switchable OAM. Using the pinhole mirror in an XFELO, this scheme adjusts only the kinetic energy of the electron beam to produce vortex beams that can be programmed to dynamically change between different OAM modes without the need for additional optical elements. With the nominal parameters of currently constructing 1 MHz repetition rate facility (i.e. SHINE), the active formation of the OAM modes of l = ${\pm}$1 and l = ${\pm}$2 and the rapid switching between them by detuning the electron beam energy of the XFELO are numerically illustrated. The real-time switching can be achieved within 200 $μ$s, while the output pulse energy can reach the 100 $μ$J level.

physics.acc-ph↗

arXiv2021

Measurement of undulator section wakefield at the SXFEL test facility

In free electron laser facilities, almost every kind of device will generate wakefield when an electron beam passes through it. Most of the wakefields are undesired and have a negative effect on the electron beam, which means a decrease of FEL performance. As for the SXFEL test facility, the sophisticated layout and the cumulative effect of such a long undulator section lead to an obvious wakefield, which is strong enough that can not be ignored. Based on two deflecting cavities at the entrance and the exit of the undulator section with corresponding profile monitors, we measured the wakefield of the undulator section. In this paper, we give the theoretical and simulation results of resistive wall wakefields which agree well with each other. In addition, the experimental and the simulation results of the overall undulator wakefield are given showing small difference. In order to explore the impact of this wakefield on FEL lasing, we give the simulation results of FEL with and without wakefield for comparison. There is almost no impact on 44 nm FEL in stage-1 of cascaded EEHG-HGHG mode, while the impact on 8.8 nm FEL in stage-2 becomes critical decreasing the pulse energy and peak power by 42% and 27% and broadening the bandwidth.

physics.acc-ph↗

arXiv2021

Numerical Study on Beam-based Alignment of SXFEL Undulator Lattice

The undulator line of the Shanghai soft X-ray Free-electron Laser facility (SXFEL) has very tight tolerances on the straightness of the electron beam trajectory. However, the beam trajectory cannot meet the lasing requirements due to the influence of beam position, launch angle and quadrupole offsets. Traditional mechanical alignment can only control the rms of offsets to about 100 $μ$m, which is far from reaching the requirement. Further orbit correction can be achieved by beam-based alignment (BBA) method based on electron energy variations. K modulation is used to determine whether the beam passes through the quadrupole magnetic center, and the Dispersion-Free Steering (DFS) method is used to calculate the offsets of quadrupole and BPM. In this paper, a detailed result of simulation is presented which demonstrates that the beam trajectory with rms and standard deviation ($σ$) less than 10 $μ$m can be obtained.

physics.acc-ph↗

arXiv2021

First observation of laser-beam interaction in a dipole magnet

As a new-generation light source, free-electron lasers (FELs) provide high-brightness X-ray pulses at the angstrom-femtosecond space and time scales. The fundamental physics behind the FEL is the interaction between an electromagnetic wave and a relativistic electron beam in an undulator, which consists of hundreds or thousands of dipole magnets with an alternating magnetic field. Here, we report the first observation of the laser-beam interaction in a pure dipole magnet, in which the electron beam energy modulation with 40-keV amplitude and 266-nm period is measured. We demonstrate that such an energy modulation can be used to launch a seeded FEL, that is, lasing at the sixth harmonic of the seed laser in a high-gain harmonic generation scheme. The results reveal the most basic process of the FEL lasing and open up a new direction for the study and exploitation of laser-beam interactions.

physics.acc-ph↗

arXiv2020

Energy recovery operation for continuous-wave X-ray free-electron lasers

A superconducting linear accelerator operating in continuous-wave mode could produce X-ray free electron lasers (XFEL) at megahertz repetition rate, with the capability that delivering wide spectral range coherent radiation to multi end stations. In this Letter, the energy recovery Linac (ERL) mode is proposed to flexibly control the electron beam energy for a continuous-wave superconducting Linac. Theoretical investigations and multi-dimensional numerical simulations are applied to the Linac case of Shanghai high-repetition-rate XFEL and extreme light facility. The results show that, with ERL operation in the last 25 cryo-modules, the strict requirements on RF power system could be significantly relaxed. And if one exhaust the RF power, the maximum electron beam energy can be enhanced from 8.74 GeV to 11.41GeV in ERL mode. The optimization of the ERL operation, the multi-energy electron beam transport and the XFEL performance improvements are presented.

physics.acc-ph↗

arXiv2020

Generating X-rays with orbital angular momentum in free-electron laser oscillator

The generation of light beams carrying orbital angular momentum (OAM) from a free-electron laser at short wavelengths has attracted considerable attention as a key resource in several fields and applications. Herein, we present a facile method to generate intense and coherent OAM beams from an X-ray free-electron laser oscillator (XFELO). We use the Bragg crystal as both a reflector as well as mode selector, in both longitudinal and transverse modes, which enables the specified resonance deviation that maximizes the single-pass gain of the high-order OAM mode of interest. This can allow the amplification and saturation of OAM beams in a typical XFELO configuration. Our results show that 150~$μ$J fully coherent, hard-X-ray pulses carrying first-order OAM can be generated without utilizing any external elements such as optical mode converters or elliptically polarized undulators. This simple and straightforward method can pave the way for the further customization of the transverse-mode operation of X-ray free-electron laser oscillators.

physics.acc-ph↗

arXiv2020

Thermal loading on crystals in an X-ray free-electron laser oscillator

X-ray free electron laser oscillators (XFELO) is future light source to produce fully coherent hard X-ray pulses. The X-rays circulate in an optical cavity built from multiple Bragg reflecting mirrors, which has a high reflectance in a bandwidth of ten meV level. The X-ray crystal mirrors exposed to intense X-ray beams in the cavity are subjects to thermal deformations that shift and distort the Bragg reflection. Therefore, the stability of the XFELO operation relies on the abilities of mirrors to preserve the Bragg reflection under such heat load. A new approach was used to analyze the heat load of mirrors and the XFELO operation. The essential light-matter interaction is simulated by the GEANT4 with a dedicated Bragg-reflection physical process to obtain the precise absorption information of the XFELO pulse in the crystals. The transient thermal conduction is analyzed by the finite-element analysis software upon the energy absorption information extract from GEANT4 simulation. A simplified heat-load model is then developed to integrate the heat load in the XFELO. With the help of the heat-load model, the analysis of XFELO operating with several cryogenically cooled diamond mirrors is conducted. The results indicate that the heat load would induce an oscillation when XFELO operates without enough cooling.

physics.acc-ph↗

arXiv2019

Polarization control of an X-ray free electron laser oscillator

High-intensity, fully coherent X-ray radiation with a tunable polarization over a wide spectral range is of great importance to many experiments. In this paper, we propose a tapered crossed-polarized undulator configuration for X-ray free electron laser oscillator (XFELO) to produce arbitrarily polarized X-ray pulses in hard X-ray region. A numerical example utilizing the parameters of the Shanghai High-Repetition-Rate XFEL and Extreme Light Facility (SHINE) is presented to demonstrate the generation of polarization controllable, fully coherent Hard X-ray pulses with 99.9% polarization degree and 20 KHz polarization switching rate. This scheme also holds the possibility to be used in cavity tunable XFELO.

physics.acc-ph↗