arXiv subjects

Naresh Kumar Emani

Publications and source records attributed to Naresh Kumar Emani.

5 recordsLinked to original sources

arXiv2026

Optimization of photonic waveguide bends for low index contrast material platforms

Compact and low loss waveguide bends are vital for enhancing the integration density of on chip photonic devices. The bend loss becomes extremely critical, particularly for compact bends in low index contrast platforms such as Indium Phosphide. To address this issue, we introduce an elliptical width modulated bend, which exhibits low loss. For example, at 6 micrometers radius bend loss for elliptical width modulated bend is 0.22 decibels per 90 degrees, resulting in about 40 percent and 27 per cent reduction compared to conventional circular bends and circular width modulated bends, respectively with only a 15 per cent increase in footprint providing a better loss area trade off. Additionally, conventional effective index based analytical models do not account for the impact of width modulation. In this work, we develop an enhanced analytical bend loss formulation that incorporates these effects and validates its accuracy through close agreement with full three dimensional Finite Difference Time Domain simulations.

physics.optics↗

arXiv2020

Enhanced light emission from gap plasmons in nano-strip MIM tunnel junctions

Electrical excitation of light using inelastic electron tunneling is a promising approach for the realization of ultra-compact on-chip optical sources with high modulation bandwidth. However, the practical implementation of these nanoscale light sources presents a challenge due to the low electron-to-photon transduction efficiencies. Here, we investigate designs for the enhancement of light generation and out-coupling in a periodic Ag-SiO2-Ag tunnel junction due to inelastic electron tunneling. The structure presents a unique advantage of a simple fabrication procedure as compared to the other reported structures. By efficiently coupling the gap plasmon mode and the lattice resonance, we achieve a resonant enhancement in the local density of optical states up to three orders of magnitude and enhanced radiative efficiency of ~0.53, 30% higher as compared to the uncoupled structure.

physics.optics↗

arXiv2020

Enhancement of the optical gain in GaAs nanocylinders for nanophotonic applications

Semiconductor nanolasers based on micro disks, photonic crystal cavities, and metallo-dielectric nanocavities have been studied during the last decade for on-chip light source applications. However, practical realization of low threshold, room temperature operation of semiconductor nanolasers is still a challenge due to the large surface-to-volume ratio of the nanostructures, which results in low optical gain and hence higher lasing threshold. Also, the gain in nanostructures is an important parameter for designing all-dielectric metamaterial-based active applications. Here, we investigate the impact of p-type doping, compressive strain, and surface recombination on the gain spectrum and the spatial distribution of carriers in GaAs nanocylinders. Our analysis reveals that the lasing threshold can be lowered by choosing the right doping concentration in the active III-V material combined with compressive strain. This combination of strain and p-type doping shows 100x improvement in gain and ~5 times increase in modulation bandwidth for high-speed operation.

physics.optics↗

arXiv2018

Lasing action in active dielectric nanoantenna arrays

Directional lasing, with a low threshold and high quality factor, in active dielectric nanoantenna arrays is demonstrated. This is achieved through a leaky resonance excited in coupled gallium arsenide (GaAs) nanopillars. The leaky resonance is formed by partially breaking a bound state in the continuum (BIC) generated by the collective, vertical electric dipole resonances excited in the nanopillars for sub-diffractive arrays. By opening an unprotected, diffractive channel along one of the periods of the array one can control the directionality of the emitted light without sacrificing the high Q associated with the BIC mode, thus achieving directional lasing. A quality factor Q = 2750 is achieved at a controlled angle of emission of ~ 3 degrees with respect to the normal of the array with a pumping fluence as low as 10 uJ/cm^2. We demonstrate the possibility to control the lasing directivity and wavelength by changing the geometrical parameters of the nanoantenna array, and by tuning the gain spectrum of GaAs with temperature. Lasing action is demonstrated at different wavelengths and emission at different angles, which can be as large as 25 degrees to the normal. The obtained results provide guidelines for achieving surface emitting laser devices based on active dielectric nanoantennas that are compact and highly transparent.

physics.optics↗

arXiv2015

Plasmon Resonance in Multilayer Graphene Nanoribbons

Plasmon resonance in nanopatterned single layer graphene nanoribbon (SL-GNR), double layer graphene nanoribbon (DL-GNR) and triple layer graphene nanoribbon (TL-GNR) structures is studied both experimentally and by numerical simulations. We use 'realistic' graphene samples in our experiments to identify the key bottle necks in both experiments and theoretical models. The existence of electrical tunable plasmons in such stacked multilayer GNRs was first experimentally verified by infrared microscopy. We find that the strength of the plasmonic resonance increases in DL-GNR when compared to SL-GNRs. However, we do not find a further such increase in TL-GNRs compared to DL-GNRs. We carried out systematic full wave simulations using finite element technique to validate and fit experimental results, and extract the carrier scattering rate as a fitting parameter. The numerical simulations show remarkable agreement with experiments for unpatterned SLG sheet, and a qualitative agreement for patterned graphene sheet. We believe that further improvements such as introducing a bandgap into the numerical model could lead to a better quantitative agreement of numerical simulations with experiments. We also note that such advanced modeling would first require better quality graphene samples and accurate measurements.

physics.optics↗