arXiv subjects

Narsireddy Anugu

Publications and source records attributed to Narsireddy Anugu.

78 records · Page 5Linked to original sources

arXiv2018

Astronomical interferometry with near-IR e-APD at CHARA: characterization, optimization and on-sky operation

We characterize a near-infrared C-RED ONE camera from First Light Imaging (FLI). This camera uses a SAPHIRA electron avalanche photo-diode array (e-APD) from Leonardo (previously Selex). To do so, we developed a model of the signal distribution. This model allows a measurement of the gain and the Excess Noise Factor (ENF) independently of preexisting calibration such as the system gain. The results of this study show a gain which is 0.53 +/- 0.04 times the gain reported by the manufacturer. The measured ENF is 1.47 +/- 0.03 when we expected 1.25. For an avalanche gain of 60 and a frame rate larger than 100 Hz, the total noise can be lower than 1 e-/frame/pixel. The lowest dark current level is 90e-/s/pixel, in agreement with the expected H-band background passing through the camera window. These performance values provide a significant improvement compared to earlier-generation PICNIC camera and allowed us to improve the performance of the Michigan infrared combiner (MIRC) instrument at the Center for High Angular Resolution Astronomy (CHARA), as part of our MIRC-X instrumentation project.

astro-ph.IM↗

arXiv2018

The MIRC-X 6-telescope imager: Key science drivers, instrument design and operation

MIRC-X is a new beam combination instrument at the CHARA array that enables 6-telescope interferometric imaging on object classes that until now have been out of reach for milliarcsecond-resolution imaging. As part of an instrumentation effort lead by the University of Exeter and University of Michigan, we equipped the MIRC instrument with an ultra-low read-noise detector system and extended the wavelength range to the J and H-band. The first phase of the MIRC-X commissioning was successfully completed in June 2017. In 2018 we will commission polarisation control to improve the visibility calibration and implement a 'cross-talk resiliant' mode that will minimise visibility cross-talk and enable exoplanet searches using precision closure phases. Here we outline our key science drivers and give an overview about our commissioning timeline. We comment on operational aspects, such as remote observing, and the prospects of co-phased parallel operations with the upcoming MYSTIC combiner.

astro-ph.IM↗

arXiv2018

MIRC-X/CHARA: sensitivity improvements with an ultra-low noise SAPHIRA detector

MIRC-X is an upgrade of the six-telescope infrared beam combiner at the CHARA telescope array, the world's largest baseline interferometer in the optical/infrared, located at the Mount Wilson Observatory in Los Angeles. The upgraded instrument features an ultra-low noise and fast frame rate infrared camera (SAPHIRA detector) based on e-APD technology. We report the MIRC-X sensitivity upgrade work and first light results in detail focusing on the detector characteristics and software architecture.

astro-ph.IM↗

arXiv2018

Peak-locking centroid bias in Shack-Hartmann wavefront sensing

Shack-Hartmann wavefront sensing relies on accurate spot centre measurement. Several algorithms were developed with this aim, mostly focused on precision, i.e. minimizing random errors. In the solar and extended scene community, the importance of the accuracy (bias error due to peak-locking, quantisation or sampling) of the centroid determination was identified and solutions proposed. But these solutions only allow partial bias corrections. To date, no systematic study of the bias error was conducted. This article bridges the gap by quantifying the bias error for different correlation peak-finding algorithms and types of sub-aperture images and by proposing a practical solution to minimize its effects. Four classes of sub-aperture images (point source, elongated laser guide star, crowded field and solar extended scene) together with five types of peak-finding algorithms (1D parabola, the centre of gravity, Gaussian, 2D quadratic polynomial and pyramid) are considered, in a variety of signal-to-noise conditions. The best performing peak-finding algorithm depends on the sub-aperture image type, but none is satisfactory to both bias and random errors. A practical solution is proposed that relies on the anti-symmetric response of the bias to the sub-pixel position of the true centre. The solution decreases the bias by a factor of ~7 to values of < 0.02 pix. The computational cost is typically twice of current cross-correlation algorithms.

astro-ph.IM↗

arXiv2016

A high-mass protobinary system with spatially resolved circumstellar accretion disks and circumbinary disk

High-mass multiples might form via fragmentation of self-gravitational disks or alternative scenarios such as disk-assisted capture. However, only few observational constraints exist on the architecture and disk structure of high-mass protobinaries and their accretion properties. Here we report the discovery of a close ($57.9\pm0.2$mas=170au) high-mass protobinary, IRAS17216-3801, where our VLTI/GRAVITY+AMBER near-infrared interferometry allows us to image the circumstellar disks around the individual components with 3 milliarcsecond resolution. We estimate the component masses to $\sim20$ and $\sim18 M_{\odot}$ and find that the radial intensity profiles can be reproduced with an irradiated disk model, where the inner regions are excavated of dust, likely tracing the dust sublimation region in these disks. The circumstellar disks are strongly misaligned with respect to the binary separation vector, which indicates that the tidal forces did not have time to realign the disks, pointing towards a young dynamical age of the system. We constrain the distribution of the Br$γ$ and CO-emitting gas using VLTI/GRAVITY spectro-interferometry and VLT/CRIRES spectro-astrometry and find that the secondary is accreting at a higher rate than the primary. VLT/NACO imaging shows $L'$-band emission on 3-4 times larger scales than the binary separation, matching the expected dynamical truncation radius for the circumbinary disk. The IRAS17216-3801 system is $\sim3\times$ more massive and $\sim5\times$ more compact than other high-mass multiplies imaged at infrared wavelengths and the first high-mass protobinary system where circumstellar and circumbinary dust disks could be spatially resolved. This opens exciting new opportunities for studying star-disk interactions and the role of multiplicity in high-mass star formation.

astro-ph.SR↗

arXiv2015

The GRAVITY instrument software / High-level software

GRAVITY is the four-beam, near- infrared, AO-assisted, fringe tracking, astrometric and imaging instrument for the Very Large Telescope Interferometer (VLTI). It is requiring the development of one of the most complex instrument software systems ever built for an ESO instrument. Apart from its many interfaces and interdependencies, one of the most challenging aspects is the overall performance and stability of this complex system. The three infrared detectors and the fast reflective memory network (RMN) recorder contribute a total data rate of up to 20 MiB/s accumulating to a maximum of 250 GiB of data per night. The detectors, the two instrument Local Control Units (LCUs) as well as the five LCUs running applications under TAC (Tools for Advanced Control) architecture, are interconnected with fast Ethernet, RMN fibers and dedicated fiber connections as well as signals for the time synchronization. Here we give a simplified overview of all subsystems of GRAVITY and their interfaces and discuss two examples of high-level applications during observations: the acquisition procedure and the gathering and merging of data to the final FITS file.

astro-ph.IM↗