SearcharxivSearch

arXiv subjects

Nathan Hewitt

Publications and source records attributed to Nathan Hewitt.

13 recordsLinked to original sources

Digital quantum magnetism on a trapped-ion quantum computer

Digital quantum matter -- realized when discrete quantum gates approximate continuous time evolution -- is susceptible to heating into chaotic, structureless states. If digitization errors are adequately suppressed, a long-lived transient regime of approximately energy-conserving dynamics can be observed on gate-based quantum computers. Conservation of energy, in turn, enables the exploration of a wide variety of complex behaviors observed in equilibrium systems, ranging from the nontrivial microscopic origins of thermalization itself to the stabilization of effective models hosting exotic emergent properties. Here, we use Quantinuum's system model H2 quantum computer to simulate digitized dynamics of the quantum Ising model, suppressing digitization errors well enough to observe thermalization on timescales that severely challenge classical simulation methods. Relaxation of an inhomogeneous state reveals an emergent hydrodynamics due to approximate energy conservation, and we compute the associated diffusion constant. By reprogramming our simulations to take place on a triangular lattice with periodic boundary conditions, we observe thermalization consistent with emergent gauge and topological constraints resulting from lattice frustration. Our results were enabled by continued advances in two-qubit gate quality (native partial entangler fidelities of $99.94(1)\%$), and establish digital quantum computers as powerful tools for studying (effectively) continuous-time dynamics.

quant-ph

Qutrit Toric Code and Parafermions in Trapped Ions

The development of programmable quantum devices can be measured by the complexity of manybody states that they are able to prepare. Among the most significant are topologically ordered states of matter, which enable robust quantum information storage and processing. While topological orders are more readily accessible with qudits, experimental realisations have thus far been limited to lattice models of qubits. Here, we prepare a ground state of the Z3 toric code state on 24 qutrits in a trapped ion quantum processor with fidelity per qutrit exceeding 96.5(3)%. We manipulate two types of defects which go beyond the conventional qubit toric code: a parafermion, and its bound state which is related to charge conjugation symmetry. We further demonstrate defect fusion and the transfer of entanglement between anyons and defects, which we use to control topological qutrits. Our work opens up the space of long-range entangled states with qudit degrees of freedom for use in quantum simulation and universal error-correcting codes.

quant-ph

Experimental Demonstration of Break-Even for the Compact Fermionic Encoding

The utility of solving the Fermi-Hubbard model has been estimated in the billions of dollars. Digital quantum computers can in principle address this task, but have so far been limited to quasi one-dimensional models. This is because of exponential overheads caused by the interplay of noise and the non-locality of the mapping between fermions and qubits. Here, we show experimentally that a recently developed local encoding can overcome this problem. We develop a new compilation scheme, called "corner hopping", that reduces the cost of simulating fermionic hopping by 42% which allows us to conduct the largest digital quantum simulations of a fermionic model to date, using a trapped ion quantum computer to prepare adiabatically the ground state of a 6 x 6 spinless Fermi-Hubbard model encoded in 48 physical qubits. We also develop two new error mitigation schemes for systems with conserved quantities, one based on local postselection and one on extrapolation of local observables. Our results suggest that Fermi-Hubbard models beyond classical simulability can be addressed by digital quantum computers without large increases in gate fidelity.

quant-ph

Experiments with the 4D Surface Code on a QCCD Quantum Computer

Single-shot quantum error correction has the potential to speed up quantum computations by removing the need for multiple rounds of syndrome extraction in order to be fault-tolerant. Using Quantinuum's H2 trapped-ion quantum computer, we implement the [[33,1,4]] 4D surface code and perform the first experimental demonstration of single-shot quantum error correction with bare ancilla qubits. We conduct memory experiments comparing the 2D and 4D surface codes and find that despite differences in qubit use and syndrome extraction circuit depth, the 4D surface code matches or outperforms the 2D surface code in both the fault-tolerant and single-shot regimes.

quant-ph

The computational power of random quantum circuits in arbitrary geometries

Empirical evidence for a gap between the computational powers of classical and quantum computers has been provided by experiments that sample the output distributions of two-dimensional quantum circuits. Many attempts to close this gap have utilized classical simulations based on tensor network techniques, and their limitations shed light on the improvements to quantum hardware required to frustrate classical simulability. In particular, quantum computers having in excess of $\sim 50$ qubits are primarily vulnerable to classical simulation due to restrictions on their gate fidelity and their connectivity, the latter determining how many gates are required (and therefore how much infidelity is suffered) in generating highly-entangled states. Here, we describe recent hardware upgrades to Quantinuum's H2 quantum computer enabling it to operate on up to $56$ qubits with arbitrary connectivity and $99.843(5)\%$ two-qubit gate fidelity. Utilizing the flexible connectivity of H2, we present data from random circuit sampling in highly connected geometries, doing so at unprecedented fidelities and a scale that appears to be beyond the capabilities of state-of-the-art classical algorithms. The considerable difficulty of classically simulating H2 is likely limited only by qubit number, demonstrating the promise and scalability of the QCCD architecture as continued progress is made towards building larger machines.

quant-ph

Benchmarking logical three-qubit quantum Fourier transform encoded in the Steane code on a trapped-ion quantum computer

We implement logically encoded three-qubit circuits for the quantum Fourier transform (QFT), using the [[7,1,3]] Steane code, and benchmark the circuits on the Quantinuum H2-1 trapped-ion quantum computer. The circuits require multiple logical two-qubit gates, which are implemented transversally, as well as logical non-Clifford single-qubit rotations, which are performed by non-fault-tolerant state preparation followed by a teleportation gadget. First, we benchmark individual logical components using randomized benchmarking for the logical two-qubit gate, and a Ramsey-type experiment for the logical $T$ gate. We then implement the full QFT circuit, using two different methods for performing a logical control-$T$, and benchmark the circuits by applying it to each basis state in a set of bases that is sufficient to lower bound the process fidelity. We compare the logical QFT benchmark results to predictions based on the logical component benchmarks.

quant-ph

Fault-Tolerant One-Bit Addition with the Smallest Interesting Colour Code

Fault-tolerant operations based on stabilizer codes are the state of the art in suppressing error rates in quantum computations. Most such codes do not permit a straightforward implementation of non-Clifford logical operations, which are necessary to define a universal gate set. As a result, implementations of these operations must either use error-correcting codes with more complicated error correction procedures or gate teleportation and magic states, which are prepared at the logical level, increasing overhead to a degree that precludes near-term implementation. In this work, we implement a small quantum algorithm, one-qubit addition, fault-tolerantly on the Quantinuum H1-1 quantum computer, using the [[8,3,2]] colour code. By removing unnecessary error-correction circuits and using low-overhead techniques for fault-tolerant preparation and measurement, we reduce the number of error-prone two-qubit gates and measurements to 36. We observe arithmetic errors with a rate of $\sim 1.1 \times 10^{-3}$ for the fault-tolerant circuit and $\sim 9.5 \times 10^{-3}$ for the unencoded circuit.

quant-ph

Evidence of Scaling Advantage for the Quantum Approximate Optimization Algorithm on a Classically Intractable Problem

The quantum approximate optimization algorithm (QAOA) is a leading candidate algorithm for solving optimization problems on quantum computers. However, the potential of QAOA to tackle classically intractable problems remains unclear. Here, we perform an extensive numerical investigation of QAOA on the low autocorrelation binary sequences (LABS) problem, which is classically intractable even for moderately sized instances. We perform noiseless simulations with up to 40 qubits and observe that the runtime of QAOA with fixed parameters scales better than branch-and-bound solvers, which are the state-of-the-art exact solvers for LABS. The combination of QAOA with quantum minimum finding gives the best empirical scaling of any algorithm for the LABS problem. We demonstrate experimental progress in executing QAOA for the LABS problem using an algorithm-specific error detection scheme on Quantinuum trapped-ion processors. Our results provide evidence for the utility of QAOA as an algorithmic component that enables quantum speedups.

quant-ph

Probing critical states of matter on a digital quantum computer

Although quantum mechanics underpins the microscopic behavior of all materials, its effects are often obscured at the macroscopic level by thermal fluctuations. A notable exception is a zero-temperature phase transition, where scaling laws emerge entirely due to quantum correlations over a diverging length scale. The accurate description of such transitions is challenging for classical simulation methods of quantum systems, and is a natural application space for quantum simulation. These quantum simulations are, however, not without their own challenges \textemdash~representing quantum critical states on a quantum computer requires encoding entanglement of a large number of degrees of freedom, placing strict demands on the coherence and fidelity of the computer's operations. Using Quantinuum's H1-1 quantum computer, we address these challenges by employing hierarchical quantum tensor-network techniques, creating the ground state of the critical transverse-field Ising chain on 128-sites with sufficient fidelity to extract accurate critical properties of the model. Our results suggest a viable path to quantum-assisted tensor network contraction beyond the limits of classical methods.

quant-ph

Experimental demonstration of the advantage of adaptive quantum circuits

Adaptive quantum circuits employ unitary gates assisted by mid-circuit measurement, classical computation on the measurement outcome, and the conditional application of future unitary gates based on the result of the classical computation. In this paper, we experimentally demonstrate that even a noisy adaptive quantum circuit of constant depth can achieve a task that is impossible for any purely unitary quantum circuit of identical depth: the preparation of long-range entangled topological states with high fidelity. We prepare a particular toric code ground state with fidelity of at least $76.9\pm 1.3\%$ using a constant depth ($d=4$) adaptive circuit, and rigorously show that no unitary circuit of the same depth and connectivity could prepare this state with fidelity greater than $50\%$.

quant-ph

Topological Order from Measurements and Feed-Forward on a Trapped Ion Quantum Computer

Quantum systems evolve in time in one of two ways: through the Schr\"odinger equation or wavefunction collapse. So far, deterministic control of quantum many-body systems in the lab has focused on the former, due to the probabilistic nature of measurements. This imposes serious limitations: preparing long-range entangled states, for example, requires extensive circuit depth if restricted to unitary dynamics. In this work, we use mid-circuit measurement and feed-forward to implement deterministic non-unitary dynamics on Quantinuum's H1 programmable ion-trap quantum computer. Enabled by these capabilities, we demonstrate for the first time a constant-depth procedure for creating a toric code ground state in real-time. In addition to reaching high stabilizer fidelities, we create a non-Abelian defect whose presence is confirmed by transmuting anyons via braiding. This work clears the way towards creating complex topological orders in the lab and exploring deterministic non-unitary dynamics via measurement and feed-forward.

quant-ph

ADG-Pose: Automated Dataset Generation for Real-World Human Pose Estimation

Recent advancements in computer vision have seen a rise in the prominence of applications using neural networks to understand human poses. However, while accuracy has been steadily increasing on State-of-the-Art datasets, these datasets often do not address the challenges seen in real-world applications. These challenges are dealing with people distant from the camera, people in crowds, and heavily occluded people. As a result, many real-world applications have trained on data that does not reflect the data present in deployment, leading to significant underperformance. This article presents ADG-Pose, a method for automatically generating datasets for real-world human pose estimation. These datasets can be customized to determine person distances, crowdedness, and occlusion distributions. Models trained with our method are able to perform in the presence of these challenges where those trained on other datasets fail. Using ADG-Pose, end-to-end accuracy for real-world skeleton-based action recognition sees a 20% increase on scenes with moderate distance and occlusion levels, and a 4X increase on distant scenes where other models failed to perform better than random.

cs.CV

A System for 3D Reconstruction Of Comminuted Tibial Plafond Bone Fractures

High energy impacts at joint locations often generate highly fragmented, or comminuted, bone fractures. Current approaches for treatment require physicians to decide how to classify the fracture within a hierarchy fracture severity categories. Each category then provides a best-practice treatment scenario to obtain the best possible prognosis for the patient. This article identifies shortcomings associated with qualitative-only evaluation of fracture severity and provides new quantitative metrics that serve to address these shortcomings. We propose a system to semi-automatically extract quantitative metrics that are major indicators of fracture severity. These include: (i) fracture surface area, i.e., how much surface area was generated when the bone broke apart, and (ii) dispersion, i.e., how far the fragments have rotated and translated from their original anatomic positions. This article describes new computational tools to extract these metrics by computationally reconstructing 3D bone anatomy from CT images with a focus on tibial plafond fracture cases where difficult qualitative fracture severity cases are more prevalent. Reconstruction is accomplished within a single system that integrates several novel algorithms that identify, extract and piece-together fractured fragments in a virtual environment. Doing so provides objective quantitative measures for these fracture severity indicators. The availability of such measures provides new tools for fracture severity assessment which may lead to improved fracture treatment. This paper describes the system, the underlying algorithms and the metrics of the reconstruction results by quantitatively analyzing six clinical tibial plafond fracture cases.

cs.CV