SearcharxivSearch

arXiv subjects

Neil Bassett

Publications and source records attributed to Neil Bassett.

9 recordsLinked to original sources

Fitting and Comparing Galactic Foreground Models for Unbiased 21-cm Cosmology

Accurate detection of the cosmological 21-cm global signal requires galactic foreground models which can remove power over ~$10^6$. Although foreground and global signal models unavoidably exhibit overlap in their vector-spaces inducing bias error in the extracted signal, a second source of bias and error arises from inadequate foreground models, i.e. models which cannot fit spectra down to the noise level of the signal. We therefore test the level to which seven commonly employed foreground models -- including nonlinear and linear forward-models, polynomials, and maximally-smooth polynomials -- fit realistic simulated mock foreground spectra, as well as their dependence upon model inputs. The mock spectra are synthesized for an EDGES-like experiment and we compare all models' goodness-of-fit and preference using a Kolomogorov-Smirnov test of the noise-normalized residuals in order to compare models with differing, and sometimes indeterminable, degrees of freedom. For a single LST bin spectrum and p-value threshold of $p=0.05$, the nonlinear-forward model with 4 parameters is preferred ($p=0.99$), while the linear forward-model fits well with 6-7 parameters ($p=0.94,0.97$ respectively). The polynomials and maximally-smooth polynomials, like those employed by the EDGES and SARAS3 experiments, cannot produce good fits with 5 parameters for the experimental simulations in this work ($p<10^{-6}$). However, we find that polynomials with 6 parameters pass the KS-test ($p=0.4$), although a 9 parameter fit produces the highest p-value ($p\sim0.67$). When fitting multiple LST bins simultaneously, we find that the linear forward-model outperforms (a higher p-value) the nonlinear for 2, 5 and 10 LST bins. Importantly, the KS-test consistently identifies best-fit \textit{and} preferred models.

astro-ph.CO

LuSEE 'Night': The Lunar Surface Electromagnetics Experiment

The Lunar Surface Electromagnetics Explorer 'LuSEE Night' is a low frequency radio astronomy experiment that will be delivered to the farside of the Moon by the NASA Commercial Lunar Payload Services (CLPS) program in late 2025 or early 2026. The payload system is being developed jointly by NASA and the US Department of Energy (DOE) and consists of a 4 channel, 50 MHz Nyquist baseband receiver system and 2 orthogonal $\sim$6m tip-to-tip electric dipole antennas. LuSEE Night will enjoy standalone operations through the lunar night, without the electromagnetic interference (EMI) of an operating lander system and antipodal to our noisy home planet.

astro-ph.IM

Constraining a Model of the Radio Sky Below 6 MHz Using the Parker Solar Probe/FIELDS Instrument in Preparation for Upcoming Lunar-based Experiments

We present a Bayesian analysis of data from the FIELDS instrument on board the Parker Solar Probe (PSP) spacecraft with the aim of constraining low frequency ($\lesssim$ 6 MHz) sky in preparation for several upcoming lunar-based experiments. We utilize data recorded during PSP's ``coning roll'' maneuvers, in which the axis of the spacecraft is pointed 45$^{\circ}$ off of the Sun. The spacecraft then rotates about a line between the Sun and the spacecraft with a period of 24 minutes. We reduce the data into two formats: roll-averaged, in which the spectra are averaged over the roll, and phase-binned, in which the spectra are binned according to the phase of the roll. We construct a forward model of the FIELDS observations that includes numerical simulations of the antenna beam, an analytic emissivity function of the galaxy, and estimates of the absorption due to free electrons. Fitting 5 parameters, we find that the roll-averaged data can be fit well by this model and we obtain posterior parameter constraints that are in general agreement with previous estimates. The model is not, however, able to fit the phase-binned data well, likely due to limitations such as the lack of non-smooth emission structure at both small and large scales, enforced symmetry between the northern and southern galactic hemispheres, and large uncertainties in the free electron density. This suggests that significant improvement in the low frequency sky model is needed in order to fully and accurately represent the sky at frequencies below 6 MHz.

astro-ph.GA

Constraining Warm Dark Matter and Pop III stars with the Global 21-cm Signal

Upcoming ground and space-based experiments may have sufficient accuracy to place significant constraints upon high-redshift star formation, Reionization, and dark matter (DM) using the global 21-cm signal of the intergalactic medium. In the early universe, when the relative abundance of low-mass DM halos is important, measuring the global signal would place constraints on the damping of structure formation caused by DM having a higher relic velocity (warm dark matter, or WDM) than in cold dark matter (CDM). Such damping, however, can be mimicked by altering the star formation efficiency (SFE) and difficult to detect because of the presence of Pop III stars with unknown properties. We study these various cases and their degeneracies with the WDM mass parameter $m_X$ using a Fisher matrix analysis. We study the $m_X = 7$ keV case and a star-formation model that parametrizes the SFE as a strong function of halo mass and include several variations of this model along with three different input noise levels for the likelihood; we also use a minimum halo virial temperature for collapse near the molecular cooling threshold. We find that when the likelihood includes only Pop II stars, $m_X$ is constrained to an uncertainty of $\sim 0.4$ keV for all models and noise levels at 68$\%$ CI. When the likelihood includes weak Pop III stars, $m_X \sim 0.3$ keV, and if Pop III star formation is relatively efficient, $m_X \sim 0.1$ keV uncertainty, with tight Pop III star-formation parameter constraints. Our results show that the global 21-cm signal is a promising test-bed for WDM models, even in the presence of strong degeneracies with astrophysical parameters.

astro-ph.CO

Lost Horizon: Quantifying the Effect of Local Topography on Global 21-cm Cosmology Data Analysis

We present an investigation of the horizon and its effect on global 21-cm observations and analysis. We find that the horizon cannot be ignored when modeling low frequency observations. Even if the sky and antenna beam are known exactly, forward models cannot fully describe the beam-weighted foreground component without accurate knowledge of the horizon. When fitting data to extract the 21-cm signal, a single time-averaged spectrum or independent multi-spectrum fits may be able to compensate for the bias imposed by the horizon. However, these types of fits lack constraining power on the 21-cm signal, leading to large uncertainties on the signal extraction, in some cases larger in magnitude than the 21-cm signal itself. A significant decrease in signal uncertainty can be achieved by performing multi-spectrum fits in which the spectra are modeled simultaneously with common parameters. The cost of this greatly increased constraining power, however, is that the time dependence of the horizon's effect, which is more complex than its spectral dependence, must be precisely modeled to achieve a good fit. To aid in modeling the horizon, we present an algorithm and Python package for calculating the horizon profile from a given observation site using elevation data. We also address several practical concerns such as pixelization error, uncertainty in the horizon profile, and foreground obstructions such as surrounding buildings and vegetation. We demonstrate that our training set-based analysis pipeline can account for all of these factors to model the horizon well enough to precisely extract the 21-cm signal from simulated observations.

astro-ph.CO

Global 21-cm signal extraction from foreground and instrumental effects IV: Accounting for realistic instrument uncertainties and their overlap with foreground and signal models

All 21-cm signal experiments rely on electronic receivers that affect the data via both multiplicative and additive biases through the receiver's gain and noise temperature. While experiments attempt to remove these biases, the residuals of their imperfect calibration techniques can still confuse signal extraction algorithms. In this paper, the fourth and final installment of our pipeline series, we present a technique for fitting out receiver effects as efficiently as possible. The fact that the gain and global signal, which are multiplied in the observation equation, must both be modeled implies that the model of the data is nonlinear in its parameters, making numerical sampling the only way to explore the parameter distribution rigorously. However, multi-spectra fits, which are necessary to extract the signal confidently as demonstrated in the third paper of the series, often require large numbers of foreground parameters, increasing the dimension of the posterior distribution that must be explored and therefore causing numerical sampling inefficiencies. Building upon techniques in the second paper of the series, we outline a method to explore the full parameter distribution by numerically sampling a small subset of the parameters and analytically marginalizing over the others. We test this method in simulation using a type-I Chebyshev band-pass filter gain model and a fast signal model based on a spline between local extrema. The method works efficiently, converging quickly to the posterior signal parameter distribution. The final signal uncertainties are of the same order as the noise in the data.

astro-ph.CO

Low Radio Frequency Observations from the Moon Enabled by NASA Landed Payload Missions

A new era of exploration of the low radio frequency Universe from the Moon will soon be underway with landed payload missions facilitated by NASA's Commercial Lunar Payload Services (CLPS) program. CLPS landers are scheduled to deliver two radio science experiments, ROLSES to the nearside and LuSEE to the farside, beginning in 2021. These instruments would be pathfinders for a 10-km diameter interferometric array, FARSIDE, composed of 128 pairs of dipole antennas proposed to be delivered to the lunar surface later in the decade. ROLSES and LuSEE, operating at frequencies from 100 kHz to a few tens of MHz, will investigate the plasma environment above the lunar surface and measure the fidelity of radio spectra on the surface. Both use electrically-short, spiral-tube deployable antennas and radio spectrometers based upon previous flight models. ROLSES will measure the photoelectron sheath density to better understand the charging of the lunar surface via photoionization and impacts from the solar wind, charged dust, and current anthropogenic radio frequency interference. LuSEE will measure the local magnetic field and exo-ionospheric density, interplanetary radio bursts, Jovian and terrestrial natural radio emission, and the galactic synchrotron spectrum. FARSIDE, and its precursor risk-reduction six antenna-node array PRIME, would be the first radio interferometers on the Moon. FARSIDE would break new ground by imaging radio emission from Coronal Mass Ejections (CME) beyond 2 solar radii, monitor auroral radiation from the B-fields of Uranus and Neptune (not observed since Voyager), and detect radio emission from stellar CMEs and the magnetic fields of nearby potentially habitable exoplanets.

astro-ph.IM

Ensuring Robustness in Training Set Based Global 21-cm Cosmology Analysis

We present a methodology for ensuring the robustness of our analysis pipeline in separating the global 21-cm hydrogen cosmology signal from large systematics based on singular value decomposition (SVD) of training sets. We show how traditional goodness-of-fit metrics such as the $χ^2$ statistic that assess the fit to the full data may not be able to detect a suboptimal extraction of the 21-cm signal when it is fit alongside one or more additional components due to significant covariance between them. However, we find that comparing the number of SVD eigenmodes for each component chosen by the pipeline for a given fit to the distribution of eigenmodes chosen for synthetic data realizations created from training set curves can detect when one or more of the training sets is insufficient to optimally extract the signal. Furthermore, this test can distinguish which training set (e.g. foreground, 21-cm signal) needs to be modified in order to better describe the data and improve the quality of the 21-cm signal extraction. We also extend this goodness-of-fit testing to cases where a prior distribution derived from the training sets is applied and find that, in this case, the $χ^2$ statistic as well as the recently introduced $ψ^2$ statistic are able to detect inadequacies in the training sets due to the increased restrictions imposed by the prior. Crucially, the tests described in this paper can be performed when analyzing any type of observations with our pipeline.

astro-ph.CO

Characterizing the Radio Quiet Region Behind the Lunar Farside for Low Radio Frequency Experiments

Low radio frequency experiments performed on Earth are contaminated by both ionospheric effects and radio frequency interference (RFI) from Earth-based sources. The lunar farside provides a unique environment above the ionosphere where RFI is heavily attenuated by the presence of the Moon. We present electrodynamics simulations of the propagation of radio waves around and through the Moon in order to characterize the level of attenuation on the farside. The simulations are performed for a range of frequencies up to 100 kHz, assuming a spherical lunar shape with an average, constant density. Additionally, we investigate the role of the topography and density profile of the Moon in the propagation of radio waves and find only small effects on the intensity of RFI. Due to the computational demands of performing simulations at higher frequencies, we propose a model for extrapolating the width of the quiet region above 100 kHz that also takes into account height above the lunar surface as well as the intensity threshold chosen to define the quiet region. This model, which we make publicly available through a Python package, allows the size of the radio quiet region to be easily calculated both in orbit or on the surface, making it directly applicable for lunar satellites as well as surface missions.

astro-ph.IM