Searcharxiv⌕ Search

arXiv subjects

Nemanja Jovanovic

Publications and source records attributed to Nemanja Jovanovic.

At least 55 records · Page 3Linked to original sources

Visible Photonic Lantern integration, characterization and on-sky testing on Subaru/SCExAO

A Photonic Lantern (PL) is a novel device that efficiently converts a multi-mode fiber into several single-mode fibers. When coupled with an extreme adaptive optics (ExAO) system and a spectrograph, PLs enable high throughput spectroscopy at high angular resolution. The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system of the Subaru Telescope recently acquired a PL that converts its multi-mode input into 19 single-mode outputs. The single mode outputs feed a R~4,000 spectrograph optimized for the 600 to 760 nm wavelength range. We present here the integration of the PL on SCExAO, and study the device performance in terms of throughput, field of view, and spectral reconstruction. We also present the first on-sky demonstration of a Visible PL coupled with an ExAO system, showing a significant improvement of x12 in throughput compared to the use of a sole single-mode fiber. This work paves the way towards future high throughput photonics instrumentation at small angular resolution.

astro-ph.IM↗

The high-contrast performance of the Keck Planet Imager and Characterizer

The Keck Planet Imager and Characterizer (KPIC), a series of upgrades to the Keck II Adaptive Optics System and Instrument Suite, aims to demonstrate high-resolution spectroscopy of faint exoplanets that are spatially resolved from their host stars. In this paper, we measure KPIC's sensitivity to companions as a function of separation (i.e., the contrast curve) using on-sky data collected over four years of operation. We show that KPIC is able to reach contrasts of $1.3 \times 10^{-4}$ at 90 mas and $9.2 \times 10^{-6}$ at 420 mas separation from the star, and that KPIC can reach planet-level sensitivities at angular separations within the inner working angle of coronagraphic instruments such as GPI and SPHERE. KPIC is also able to achieve more extreme contrasts than other medium-/high-resolution spectrographs that are not as optimized for high-contrast performance. We decompose the KPIC performance budget into individual noise terms and discuss limiting factors. The fringing that results from combining a high-contrast imaging system with a high-resolution spectrograph is identified as an important source of systematic noise. After mitigation and correction, KPIC is able to reach within a factor of 2 of the photon noise limit at separations < 200 mas. At large separations, KPIC is limited by the background noise performance of NIRSPEC.

astro-ph.IM↗

Rotation and Abundances of the Benchmark Brown Dwarf HD 33632 Ab from Keck/KPIC High-resolution Spectroscopy

We present the projected rotational velocity and molecular abundances for HD 33632 Ab obtained via Keck Planet Imager and Characterizer high-resolution spectroscopy. HD 33632 Ab is a nearby benchmark brown dwarf companion at a separation of $\sim$20 au that straddles the L/T transition. Using a forward-modeling framework with on-axis host star spectra, self-consistent substellar atmospheric and retrieval models for HD 33632 Ab, we derive a projected rotational velocity of 53 $\pm$ 3 km/s and carbon/water mass fractions of log CO = $-$2.3 $\pm$ 0.3 and log H$_2$O = $-$2.7 $\pm$ 0.2. The inferred carbon-to-oxygen ratio (C/O = 0.58 $\pm$ 0.14), molecular abundances, and metallicity ([C/H] = 0.0 $\pm$ 0.2 dex) of HD 33632 Ab are consistent with its host star. Although detectable methane opacities are expected in L/T transition objects, we did not recover methane in our KPIC spectra, partly due to the high $v\sin{i}$ and to disequilibrium chemistry at the pressures we are sensitive to. We parameterize the spin as the ratio of rotation over break-up velocity, and compare HD 33632 Ab to a compilation of >200 very low-mass objects (M$\lesssim$0.1 M$_{\odot}$) that have spin measurements in the literature. There appears to be no clear trend for the isolated field low-mass objects versus mass, but a tentative trend is identified for low-mass companions and directly imaged exoplanets, similar to previous findings. A larger sample of close-in gas giant exoplanets and brown dwarfs will critically examine our understanding of their formation and evolution through rotation and chemical abundance measurements.

astro-ph.SR↗

kappa And b is a fast rotator from KPIC High Resolution Spectroscopy

We used the Keck Planet Imager and Characterizer (KPIC) to obtain high-resolution (R$\sim$35,000) K-band spectra of kappa Andromedae b, a planetary-mass companion orbiting the B9V star, kappa Andromedae A. We characterized its spin, radial velocity, and bulk atmospheric parameters through use of a forward modeling framework to jointly fit planetary spectra and residual starlight speckles, obtaining likelihood-based posterior probabilities. We also detected H$_{2}$O and CO in its atmosphere via cross correlation. We measured a $v\sin(i)$ value for kappa And b of $38.42\pm{0.05}$ km/s, allowing us to extend our understanding of the population of close in bound companions at higher rotation rates. This rotation rate is one of the highest spins relative to breakup velocity measured to date, at close to $50\%$ of breakup velocity. We identify a radial velocity $-17.35_{-0.09}^{+0.05}$ km/s, which we use with existing astrometry and RV measurements to update the orbital fit. We also measure an effective temperature of $1700\pm{100}$ K and a $\log(g)$ of $4.7\pm{0.5}$ cgs dex.

astro-ph.EP↗

Are these planets or brown dwarfs? Broadly solar compositions from high-resolution atmospheric retrievals of ~10-30 $M_\textrm{Jup}$ companions

Using Keck Planet Imager and Characterizer (KPIC) high-resolution ($R$~35000) spectroscopy from 2.29-2.49 $μ$m, we present uniform atmospheric retrievals for eight young substellar companions with masses of ~10-30 $M_\textrm{Jup}$, orbital separations spanning ~50-360 au, and $T_\textrm{eff}$ between ~1500-2600 K. We find that all companions have solar C/O ratios, and metallicities, to within the 1-2$σ$ level, with the measurements clustered around solar composition. Stars in the same stellar associations as our systems have near-solar abundances, so these results indicate that this population of companions is consistent with formation via direct gravitational collapse. Alternatively, core accretion outside the CO snowline would be compatible with our measurements, though the high mass ratios of most systems would require rapid core assembly and gas accretion in massive disks. On a population level, our findings can be contrasted with abundance measurements for directly imaged planets with m<10 $M_\textrm{Jup}$, which show tentative atmospheric metal enrichment. In addition, the atmospheric compositions of our sample of companions are distinct from those of hot Jupiters, which most likely form via core accretion. For two companions with $T_\textrm{eff}$~1700-2000 K (kap And b and GSC 6214-210 b), our best-fit models prefer a non-gray cloud model with >3$σ$ significance. The cloudy models yield 2-3$σ$ lower $T_\textrm{eff}$ for these companions, though the C/O and [C/H] still agree between cloudy and clear models at the $1σ$ level. Finally, we constrain 12CO/13CO for three companions with the highest S/N data (GQ Lup b, HIP 79098 b, and DH Tau b), and report $v$sin($i$) and radial velocities for all companions.

astro-ph.EP↗

Keck Primary Mirror Closed-Loop Segment Control using a Vector-Zernike Wavefront Sensor

We present the first on-sky segmented primary mirror closed-loop piston control using a Zernike wavefront sensor (ZWFS) installed on the Keck II telescope. Segment co-phasing errors are a primary contributor to contrast limits on Keck and will be necessary to correct for the next generation of space missions and ground-based extremely large telescopes (ELTs), which will all have segmented primary mirrors. The goal of the ZWFS installed on Keck is to monitor and correct primary mirror co-phasing errors in parallel with science observations. The ZWFS is ideal for measuring phase discontinuities such as segment co-phasing errors and is one of the most sensitive WFS, but has limited dynamic range. The vector-ZWFS at Keck works on the adaptive optics (AO) corrected wavefront and consists of a metasurface focal plane mask which imposes two different phase shifts on the core of the point spread function (PSF) to two orthogonal light polarizations, producing two pupil images. This design extends the dynamic range compared with the scalar ZWFS. The primary mirror segment pistons were controlled in closed-loop using the ZWFS, improving the Strehl ratio on the NIRC2 science camera by up to 10 percentage points. We analyze the performance of the closed-loop tests, the impact on NIRC2 science data, and discuss the ZWFS measurements.

astro-ph.IM↗

Orbital and Atmospheric Characterization of the 1RXS J034231.8+121622 System Using High-Resolution Spectroscopy Confirms That The Companion is a Low-Mass Star

The 1RXS J034231.8+121622 system consists of an M dwarf primary and a directly imaged low-mass stellar companion. We use high resolution spectroscopic data from Keck/KPIC to estimate the objects' atmospheric parameters and radial velocities (RVs). Using PHOENIX stellar models, we find that the primary has a temperature of 3460 $\pm$ 50 K a metallicity of 0.16 $\pm$ 0.04, while the secondary has a temperature of 2510 $\pm$ 50 K and a metallicity of $0.13\substack{+0.12 \\ -0.11}$. Recent work suggests this system is associated with the Hyades, placing it an older age than previous estimates. Both metallicities agree with current $[Fe/H]$ Hyades measurements (0.11 -- 0.21). Using stellar evolutionary models, we obtain significantly higher masses for the objects, of 0.30 $\pm$ 0.15 $M_\odot$ and 0.08 $\pm$ 0.01 $M_\odot$ (84 $\pm$ 11 $M_{Jup}$) respectively. Using the RVs and a new astrometry point from Keck/NIRC2, we find that the system is likely an edge-on, moderately eccentric ($0.41\substack{+0.27 \\ -0.08}$) configuration. We also estimate the C/O ratio of both objects using custom grid models, obtaining 0.42 $\pm$ 0.10 (primary) and 0.55 $\pm$ 0.10 (companion). From these results, we confirm that this system most likely went through a binary star formation process in the Hyades. The significant changes in this system's parameters since its discovery highlight the importance of high resolution spectroscopy for both orbital and atmospheric characterization of directly imaged companions.

astro-ph.SR↗

Efficient ultra-broadband low-resolution astrophotonic spectrographs

Broadband low-resolution near-infrared spectrographs in a compact form are crucial for ground- and space-based astronomy and other fields of sensing. Astronomical spectroscopy poses stringent requirements including high efficiency, broad band operation ($>$ 300 nm), and in some cases, polarization insensitivity. We present and compare experimental results from the design, fabrication, and characterization of broadband (1200 - 1650 nm) arrayed waveguide grating (AWG) spectrographs built using the two most promising low-loss platforms - Si$_3$N$_4$ (rectangular waveguides) and doped-SiO$_2$ (square waveguides). These AWGs have a resolving power ($λ/Δλ$) of ~200, a free spectral range of ~ 200-350 nm, and a small footprint of ~ 50-100 mm$^2$. The peak overall (fiber-chip-fiber) efficiency of the doped-SiO$_2$ AWG was ~ 79\% (1 dB), and it exhibited a negligible polarization-dependent shift compared to the channel spacing. For Si$_3$N$_4$ AWGs, the peak overall efficiency in TE mode was ~ 50\% (3 dB), and the main loss component was found to be fiber-to-chip coupling losses. These broadband AWGs are key to enabling compact integrations such as multi-object spectrographs or dispersion back-ends for other astrophotonic devices such as photonic lanterns or nulling interferometers.

astro-ph.IM↗

Thermal control of long delay lines in a high-resolution astrophotonic spectrograph

High-resolution astronomical spectroscopy carried out with a photonic Fourier transform spectrograph (FTS) requires long asymmetrical optical delay lines that can be dynamically tuned. For example, to achieve a spectral resolution of R = 30,000, a delay line as long as 1.5 cm would be required. Such delays are inherently prone to phase errors caused by temperature fluctuations. This is due to the relatively large thermo-optic coefficient and long lengths of the waveguides, in this case composed of SiN, resulting in thermally dependent changes to the optical path length. To minimize phase error to the order of 0.05 radians, thermal stability of the order of 0.05° C is necessary. A thermal control system capable of stability such as this would require a fast thermal response and minimal overshoot/undershoot. With a PID temperature control loop driven by a Peltier cooler and thermistor, we minimized interference fringe phase error to +/- 0.025 radians and achieved temperature stability on the order of 0.05° C. We present a practical system for precision temperature control of a foundry-fabricated and packaged FTS device on a SiN platform with delay lines ranging from 0.5 to 1.5 cm in length using inexpensive off-the-shelf components, including design details, control loop optimization, and considerations for thermal control of integrated photonics.

astro-ph.IM↗

Laboratory demonstration of a Photonic Lantern Nuller in monochromatic and broadband light

Photonic lantern nulling (PLN) is a method for enabling the detection and characterization of close-in exoplanets by exploiting the symmetries of the ports of a mode-selective photonic lantern (MSPL) to cancel out starlight. A six-port MSPL provides four ports where on-axis starlight is suppressed, while off-axis planet light is coupled with efficiencies that vary as a function of the planet's spatial position. We characterize the properties of a six-port MSPL in the laboratory and perform the first testbed demonstration of the PLN in monochromatic light (1569 nm) and in broadband light (1450 nm to 1625 nm), each using two orthogonal polarizations. We compare the measured spatial throughput maps with those predicted by simulations using the lantern's modes. We find that the morphologies of the measured throughput maps are reproduced by the simulations, though the real lantern is lossy and has lower throughputs overall. The measured ratios of on-axis stellar leakage to peak off-axis throughput are around 10^(-2), likely limited by testbed wavefront errors. These null-depths are already sufficient for observing young gas giants at the diffraction limit using ground-based observatories. Future work includes using wavefront control to further improve the nulls, as well as testing and validating the PLN on-sky.

astro-ph.IM↗

Vortex Fiber Nulling for Exoplanet Observations: First Direct Detection of M Dwarf Companions around HIP 21543, HIP 94666, and HIP 50319

Vortex fiber nulling (VFN) is a technique for detecting and characterizing faint companions at small separations from their host star. A near-infrared ($\sim2.3 μ$m) VFN demonstrator mode was deployed on the Keck Planet Imager and Characterizer (KPIC) instrument at the Keck Observatory and presented earlier. In this paper, we present the first VFN companion detections. Three targets, HIP 21543 Ab, HIP 94666 Ab, and HIP 50319 B, were detected with host-companion flux ratios between 70 and 430 at and within one diffraction beamwidth ($λ/D$). We complement the spectra from KPIC VFN with flux ratio and position measurements from the CHARA Array to validate the VFN results and provide a more complete characterization of the targets. This paper reports the first direct detection of these three M dwarf companions, yielding their first spectra and flux ratios. Our observations provide measurements of bulk properties such as effective temperatures, radial velocities, and v$\sin{i}$, and verify the accuracy of the published orbits. These detections corroborate earlier predictions of the KPIC VFN performance, demonstrating that the instrument mode is ready for science observations.

astro-ph.EP↗

Coherent Imaging with Photonic Lanterns

Photonic Lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers (SMFs). They can efficiently couple multi-mode telescope light into a multi-mode fiber entrance at the focal plane and convert it into multiple single-mode beams. Thus, each SMF samples its unique mode (lantern principal mode) of the telescope light in the pupil, analogous to subapertures in aperture masking interferometry (AMI). Coherent imaging with PLs can be enabled by interfering SMF outputs and applying phase modulation, which can be achieved using a photonic chip beam combiner at the backend (e.g., the ABCD beam combiner). In this study, we investigate the potential of coherent imaging by interfering SMF outputs of a PL with a single telescope. We demonstrate that the visibilities that can be measured from a PL are mutual intensities incident on the pupil weighted by the cross-correlation of a pair of lantern modes. From numerically simulated lantern principal modes of a 6-port PL, we find that interferometric observables using a PL behave similarly to separated-aperture visibilities for simple models on small angular scales ($<λ/D$) but with greater sensitivity to symmetries and capability to break phase angle degeneracies. Furthermore, we present simulated observations with wavefront errors and compare them to AMI. Despite the redundancy caused by extended lantern principal modes, spatial filtering offers stability to wavefront errors. Our simulated observations suggest that PLs may offer significant benefits in the photon noise-limited regime and in resolving small angular scales at low contrast regime.

astro-ph.IM↗

Real-time experimental demonstrations of a photonic lantern wavefront sensor

The direct imaging of an Earth-like exoplanet will require sub-nanometric wavefront control across large light-collecting apertures, to reject host starlight and detect the faint planetary signal. Current adaptive optics (AO) systems, which use wavefront sensors that reimage the telescope pupil, face two challenges that prevent this level of control: non-common-path aberrations (NCPAs), caused by differences between the sensing and science arms of the instrument; and petaling modes: discontinuous phase aberrations caused by pupil fragmentation, especially relevant for the upcoming 30-m class telescopes. Such aberrations drastically impact the capabilities of high-contrast instruments. To address these issues, we can add a second-stage wavefront sensor to the science focal plane. One promising architecture uses the photonic lantern (PL): a waveguide that efficiently couples aberrated light into single-mode fibers (SMFs). In turn, SMF-confined light can be stably injected into high-resolution spectrographs, enabling direct exoplanet characterization and precision radial velocity measurements; simultaneously, the PL can be used for focal-plane wavefront sensing. We present a real-time experimental demonstration of the PL wavefront sensor on the Subaru/SCExAO testbed. Our system is stable out to around ~400 nm of low-order Zernike wavefront error, and can correct petaling modes. When injecting ~30 nm RMS of low order time-varying error, we achieve ~10x rejection at 1 s timescales; further refinements to the control law and lantern fabrication process should make sub-nanometric wavefront control possible. In the future, novel sensors like the PLWFS may prove to be critical in resolving the wavefront control challenges posed by exoplanet direct imaging.

astro-ph.IM↗

Validation of elemental and isotopic abundances in late-M spectral types with the benchmark HIP 55507 AB system

M dwarfs are common host stars to exoplanets but often lack atmospheric abundance measurements. Late-M dwarfs are also good analogs to the youngest substellar companions, which share similar $T_{\rm eff}\sim2300-2800~K$. We present atmospheric analyses for the M7.5 companion HIP 55507 B and its K6V primary star with Keck/KPIC high-resolution ($R\sim35,000$) $K$ band spectroscopy. First, by including KPIC relative radial velocities between the primary and secondary in the orbit fit, we improve the dynamical mass precision by 60% and find $M_B=88.0_{-3.2}^{+3.4}$ $M_{\rm Jup}$, putting HIP 55507 B above the stellar-substellar boundary. We also find that HIP 55507 B orbits its K6V primary star with $a=38^{+4}_{-3}$ AU and $e=0.40\pm0.04$. From atmospheric retrievals of HIP 55507 B, we measure $\rm [C/H]=0.24\pm0.13$, $\rm [O/H]=0.15\pm0.13$, and $\rm C/O=0.67\pm0.04$. Moreover, we strongly detect $\rm ^{13}CO$ ($7.8σ$ significance) and tentatively detect $\rm H_2^{18}O$ ($3.7σ$ significance) in companion's atmosphere, and measure $\rm ^{12}CO/^{13}CO=98_{-22}^{+28}$ and $\rm H_2^{16}O/H_2^{18}O=240_{-80}^{+145}$ after accounting for systematic errors. From a simplified retrieval analysis of HIP 55507 A, we measure $\rm ^{12}CO/^{13}CO=79_{-16}^{+21}$ and $\rm C^{16}O/C^{18}O=288_{-70}^{+125}$ for the primary star. These results demonstrate that HIP 55507 A and B have consistent $\rm ^{12} C/^{13}C$ and $\rm ^{16}O/^{18}O$ to the $<1σ$ level, as expected for a chemically homogeneous binary system. Given the similar flux ratios and separations between HIP 55507 AB and systems with young, substellar companions, our results open the door to systematically measuring $\rm ^{13}CO$ and $\rm H_2^{18}O$ abundances in the atmospheres of substellar or even planetary-mass companions with similar spectral types.

astro-ph.SR↗

Atmospheric metallicity and C/O of HD 189733 b from high-resolution spectroscopy

We present high-resolution $K$-band emission spectra of the quintessential hot Jupiter HD 189733 b from the Keck Planet Imager and Characterizer (KPIC). Using a Bayesian retrieval framework, we fit the dayside pressure-temperature profile, orbital kinematics, mass-mixing ratios of H$_2$O, CO, CH$_4$, NH$_3$, HCN, and H$_2$S, and the $\rm ^{13}CO/^{12}CO$ ratio. We measure mass fractions of $\rm \log H_2O = -2.0^{+0.4}_{-0.4}$ and $\rm \log CO = -2.2^{+0.5}_{-0.5}$, and place upper limits on the remaining species. Notably, we find $\rm \log CH_4 < -4.5$ at 99\% confidence, despite its anticipated presence at the equilibrium temperature of HD 189733 b assuming local thermal equilibrium. We make a tentative ($\sim3σ$) detection of $\rm ^{13}CO$, and the retrieved posteriors suggest a $\rm ^{12}C/^{13}C$ ratio similar to or substantially less than the local interstellar value. The possible $\rm ^{13}C$ enrichment would be consistent with accretion of fractionated material in ices or in the protoplanetary disk midplane. The retrieved abundances correspond to a substantially sub-stellar atmospheric $\rm C/O = 0.3\pm0.1$, while the carbon and oxygen abundances are stellar to slightly super-stellar, consistent with core-accretion models which predict an inverse correlation between C/O and metallicity. The specific combination of low C/O and high metallicity suggests significant accretion of solid material may have occurred late in the formation process of HD 189733 b.

astro-ph.EP↗

Spectroastrometry and Imaging Science with Photonic Lanterns on Extremely Large Telescopes

Photonic lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers. In astronomical applications, PLs can efficiently couple multi-mode telescope light into a multi-mode fiber entrance and convert it into multiple single-mode beams. The output beams are highly stable and suitable for feeding into high-resolution spectrographs or photonic chip beam combiners. For instance, by using relative intensities in the output cores as a function of wavelength, PLs can enable spectroastrometry. In addition, by interfering beams in the output cores with a beam combiner in the backend, PLs can be used for high-throughput interferometric imaging. When used on an Extremely Large Telescope (ELT), with its increased sensitivity and angular resolution, the imaging and spectroastrometric capabilities of PLs will be extended to higher contrast and smaller angular scales. We study the potential spectroastrometry and imaging science cases of PLs on ELTs, including study of exomoons, broad-line regions of quasars, and inner circumstellar disks.

astro-ph.IM↗

Calibration Unit Design for High-Resolution Infrared Spectrograph for Exoplanet Characterization (HISPEC)

The latest generation of high-resolution spectrograph instruments on 10m-class telescopes continue to pursue challenging science cases. Consequently, ever more precise calibration methods are necessary to enable trail-blazing science methodology. We present the High-resolution Infrared SPectrograph for Exoplanet Characterization (HISPEC) Calibration Unit (CAL), designed to facilitate challenging science cases such as Doppler imaging of exoplanet atmospheres, precision radial velocity, and high-contrast high-resolution spectroscopy of nearby exoplanets. CAL builds upon the heritage from the pathfinder instrument Keck Planet Imager and Characterizer (KPIC) and utilizes four near-infrared (NIR) light sources encoded with wavelength information that are coupled into single-mode fibers. They can be used synchronously during science observations or asynchronously during daytime calibrations. A hollow cathode lamp (HCL) and a series of gas absorption cells provide absolute calibration from 0.98 μm to 2.5 μm. A laser frequency comb (LFC) provides stable, time-independent wavelength information during observation and CAL implements a lower finesse astro-etalon as a backup for the LFC. Design lessons from instrumentation like HISPEC will serve to inform the requirements for similar instruments for the ELTs in the future.

astro-ph.IM↗

Focal-plane wavefront sensing with photonic lanterns II: numerical characterization and optimization

We present numerical characterizations of the wavefront sensing performance for few-mode photonic lantern wavefront sensors (PLWFSs). These characterizations include calculations of throughput, control space, sensor linearity, and an estimate of maximum linear reconstruction range for standard and hybrid lanterns with 3 to 19 ports, at a wavelength of 1550 nm. We additionally consider the impact of beam-shaping optics and a charge-1 vortex mask, placed in the pupil plane. The former is motivated by the application of PLs to high-resolution spectroscopy, which could enable efficient injection into the spectrometer along with simultaneous focal-plane wavefront sensing; similarly, the latter is motivated by the application of PLs to vortex fiber nulling (VFN), which can simultaneously enable wavefront sensing and the nulling of on-axis starlight. Overall, we find that the PLWFS setups tested in this work exhibit good linearity out to ~0.25-0.5 radians of RMS wavefront error (WFE). Meanwhile, we estimate the maximum amount of WFE that can be handled by these sensors, before the sensor response becomes degenerate, to be around ~1-2 radians RMS. In the future, we expect these limits can be pushed further by increasing the number of degrees of freedom, either by adopting higher-mode-count lanterns, dispersing lantern outputs, or separating polarizations. Lastly, we consider optimization strategies for the design of the PLWFS, which involve both modification of the lantern itself and the use of pre- and post-lantern optics like phase masks and interferometric beam recombiners.

astro-ph.IM↗