SearcharxivSearch

arXiv subjects

Nicholas C. Rubin

Publications and source records attributed to Nicholas C. Rubin.

At least 19 recordsLinked to original sources

Spectral amplification for ground-state energy estimation of electronic structure in first quantization

We demonstrate an asymptotic gate complexity improvement in first-quantized ground-state energy estimation of electronic structure Hamiltonians in a plane wave basis by employing the sum-of-squares spectral gap amplification protocol. The improvement relies on identifying a sum-of-squares representation of the Hamiltonian which provides a lower bound certificate and low cost block encoding that leads to a provably lower quantum phase estimation gate cost. This is achieved by using a sum-of-squares operator generated by the total charge density operator resulting in a block encoding normalization improvement of $\lambda = \mathcal{O}\left(\eta\Delta^{-1.5}+\eta^{1.5}\Delta^{-1} \right)$ compared to prior work $\lambda = \mathcal{O}(\eta\Delta^{-2}+\eta^2\Delta^{-1})$ where $\eta$ is the number of electrons and $\Delta$ is the simulation grid spacing. The asymptotic reduction in block encoding normalization and similar block encoding costs to prior work is demonstrated to reduce resource estimates for materials and chemical systems by a factor of $2 - 44\times$ corresponding to the lowest cost estimates for ab initio materials simulation.

quant-ph

A Denser Planar Surface Code

We present a quantum code implementable on a regular $2$D hex grid with an estimated encoding rate up to $4.5\times$ of that of a rotated surface code patch using circuit-level noise in a one- and two-qubit $10^{-3}$ error uniform depolarizing model. Our approach is based on yoking a dense packing of surface code twist defects, enabled by new stabilizer measurement cycles with an optimal four layers of nearest-neighbor two-qubit gates, almost no distance-reducing hook errors, and efficient decoding. We demonstrate a space-efficient architecture for computing on densely packed logical qubits, including new padding-free lattice surgery protocols in an optimal bounding box of $2d^2$ data and measurement qubits per patch. Assuming a $1\mu$s surface code cycle time and a $10\mu$s reaction time, these developments enable chemically accurate ground state phase estimation of a broad class of `utility-scale' electronic structure simulation problems such as the $108$ spin-orbital FeMoco-based nitrogen fixation catalyst in under a month with $89$k noisy superconducting qubits. We elucidate a Pareto frontier of space-time trade-offs and find a minimum physical quantum volume of $1.3$ mega-qubit-hours. These correspond to a $36\times$ space and $6.6\times$ spacetime improvement, respectively, over our previous state-of-the-art minimum-Toffoli resource estimates (Phys. Rev. X 15, 041016).

quant-ph

Optimization Using Locally-Quantum Decoders

It was pointed out in [JSW+25] that widely-studied optimization problems such as D-regular max-k-XORSAT can be reduced to decoding of LDPC codes, using quantum algorithms related to Regev's reduction. LDPC codes have very good decoders, such as Belief Propagation (BP), and this therefore makes D-regular max-k-XORSAT an enticing target for this class of quantum algorithms. However, BP was found insufficient to achieve quantum advantage. Here, we develop an intrinsically quantum decoding technique, which decodes classical LDPC codes subject to coherent superpositions of bit flip errors. For average-case instances of D-regular max-k-XORSAT drawn from Gallager's ensemble, this quantum decoder strongly outperforms classical belief propagation at many values of k and D. For some (k,D) the approximate optima achievable using this decoder surpass both Prange's algorithm and simulated annealing. However, we stop short of achieving quantum advantage because we identify an enhancement to Prange's algorithm that recovers a precise tie, much as a precise tie was observed between the standard version of Prange's algorithm and a more limited version of locally-quantum decoding in [CT24].

quant-ph

Near-frustration-free electronic structure Hamiltonian representations and lower bound certificates

Hamiltonian representations based on the sum-of-squares (SOS) hierarchy provide rigorous lower bounds on ground-state energies and facilitate the design of efficient classical and quantum simulation algorithms. This work presents a unified framework connecting SOS decompositions with variational two-particle reduced density matrix (v2RDM) theory. We demonstrate that the ``weighted'' SOS ansatz naturally recovers the dual of the v2RDM program, enabling the strict enforcement of symmetry constraints such as particle number and spin. We provide explicit SOS constructions for the Hubbard model and electronic structure Hamiltonians, ranging from spin-free approximations to full rank-2 expansions. We also highlight theoretical connections to block-invariant symmetry shifts. Numerical benchmarks on molecular systems and Iron-Sulfur clusters validate these near frustration-free representations, demonstrating their utility in improving spectral gap amplification and reducing block encoding costs in quantum algorithms.

quant-ph

The Grand Challenge of Quantum Applications

This perspective outlines promising pathways and critical obstacles on the road to developing useful quantum computing applications, drawing on insights from the Google Quantum AI team. We propose a five-stage framework for this process, spanning from theoretical explorations of quantum advantage to the practicalities of compilation and resource estimation. For each stage, we discuss key trends, milestones, and inherent scientific and sociological impediments. We argue that two central stages -- identifying concrete problem instances expected to exhibit quantum advantage, and connecting such problems to real-world use cases -- represent essential and currently under-resourced challenges. Throughout, we touch upon related topics, including the promise of generative artificial intelligence for aspects of this research, criteria for compelling demonstrations of quantum advantage, and the future of compilation as we enter the era of early fault-tolerant quantum computing.

quant-ph

The FLuid Allocation of Surface code Qubits (FLASQ) cost model for early fault-tolerant quantum algorithms

Holistic resource estimates are essential for guiding the development of fault-tolerant quantum algorithms and the computers they will run on. This is particularly true when we focus on highly-constrained early fault-tolerant devices. Many attempts to optimize algorithms for early fault-tolerance focus on simple metrics, such as the circuit depth or T-count. These metrics fail to capture critical overheads, such as the spacetime cost of Clifford operations and routing, or miss they key optimizations. We propose the FLuid Allocation of Surface code Qubits (FLASQ) cost model, tailored for architectures that use a two-dimensional lattice of qubits to implement the two-dimensional surface code. FLASQ abstracts away the complexity of routing by assuming that ancilla space and time can be fluidly rearranged, allowing for the tractable estimation of spacetime volume while still capturing important details neglected by simpler approaches. At the same time, it enforces constraints imposed by the circuit's measurement depth and the processor's reaction time. We apply FLASQ to analyze the cost of a standard two-dimensional lattice model simulation, finding that modern advances (such as magic state cultivation and the combination of quantum error correction and mitigation) reduce both the time and space required for this task by an order of magnitude compared with previous estimates. We also analyze the Hamming weight phasing approach to synthesizing parallel rotations, revealing that despite its low T-count, the overhead from imposing a 2D layout and from its use of additional ancilla qubits will make it challenging to benefit from in early fault-tolerance. We hope that the FLASQ cost model will help to better align early fault-tolerant algorithmic design with actual hardware realization costs without demanding excessive knowledge of quantum error correction from quantum algorithmists.

quant-ph

Quantum simulation with sum-of-squares spectral amplification

We present sum-of-squares spectral amplification (SOSSA), a framework for improving quantum simulation relevant to low-energy problems. We show how SOSSA can be applied to problems like energy and phase estimation and provide fast quantum algorithms for these problems that significantly improve over prior art. To illustrate the power of SOSSA in applications, we consider the Sachdev-Ye-Kitaev model, a representative strongly correlated system, and demonstrate asymptotic speedups over generic simulation methods by a factor of the square root of the system size. Our results reinforce those observed in [G.H. Low \textit{et al.}, arXiv:2502.15882 (2025)], where SOSSA was used to achieve state-of-the-art gate costs for phase estimation of real-world quantum chemistry systems.

quant-ph

Fast quantum simulation of electronic structure by spectrum amplification

The most advanced techniques using fault-tolerant quantum computers to estimate the ground-state energy of a chemical Hamiltonian involve compression of the Coulomb operator through tensor factorizations, enabling efficient block-encodings of the Hamiltonian. A natural challenge of these methods is the degree to which block-encoding costs can be reduced. We address this challenge through the technique of spectrum amplification, which magnifies the spectrum of the low-energy states of Hamiltonians that can be expressed as sums of squares. Spectrum amplification enables estimating ground-state energies with significantly improved cost scaling in the block encoding normalization factor $\Lambda$ to just $\sqrt{2\Lambda E_{\text{gap}}}$, where $E_{\text{gap}} \ll \Lambda$ is the lowest energy of the sum-of-squares Hamiltonian. To achieve this, we show that sum-of-squares representations of the electronic structure Hamiltonian are efficiently computable by a family of classical simulation techniques that approximate the ground-state energy from below. In order to further optimize, we also develop a novel factorization that provides a trade-off between the two leading Coulomb integral factorization schemes -- namely, double factorization and tensor hypercontraction -- that when combined with spectrum amplification yields a factor of 4 to 195 speedup over the state of the art in ground-state energy estimation for models of Iron-Sulfur complexes and a CO$_{2}$-fixation catalyst.

quant-ph

Automated Quantum Chemistry Code Generation with the p$^\dagger$q Package

This article summarizes recent updates to the p$^\dagger$q package, which is a C++ accelerated Python library for generating equations and computer code corresponding to singly-reference many-body quantum chemistry methods such as coupled-cluster (CC) and equation-of-motion (EOM) CC theory. Since 2021, the functionality in \pq has expanded to include boson operators, coupled fermion-boson operators, unitary cluster operators, non-particle-conserving EOM operators, spin tracing, multiple single-particle subspaces, and more. Additional developments allow for the generation of C++ and Python code that minimizes floating-point operations via contraction order optimization, sub-expression elimination, and the fusion of similar terms.

physics.chem-ph

Rapid initial state preparation for the quantum simulation of strongly correlated molecules

Studies on quantum algorithms for ground state energy estimation often assume perfect ground state preparation; however, in reality the initial state will have imperfect overlap with the true ground state. Here we address that problem in two ways: by faster preparation of matrix product state (MPS) approximations, and more efficient filtering of the prepared state to find the ground state energy. We show how to achieve unitary synthesis with a Toffoli complexity about $7 \times$ lower than that in prior work, and use that to derive a more efficient MPS preparation method. For filtering we present two different approaches: sampling and binary search. For both we use the theory of window functions to avoid large phase errors and minimise the complexity. We find that the binary search approach provides better scaling with the overlap at the cost of a larger constant factor, such that it will be preferred for overlaps less than about $0.003$. Finally, we estimate the total resources to perform ground state energy estimation of Fe-S cluster systems, including the FeMo cofactor by estimating the overlap of different MPS initial states with potential ground-states of the FeMo cofactor using an extrapolation procedure. {With a modest MPS bond dimension of 4000, our procedure produces an estimate of $\sim 0.9$ overlap squared with a candidate ground-state of the FeMo cofactor, producing a total resource estimate of $7.3 \times 10^{10}$ Toffoli gates; neglecting the search over candidates and assuming the accuracy of the extrapolation, this validates prior estimates that used perfect ground state overlap. This presents an example of a practical path to prepare states of high overlap in a challenging-to-compute chemical system.

quant-ph

Expressing and Analyzing Quantum Algorithms with Qualtran

Quantum computing's transition from theory to reality has spurred the need for novel software tools to manage the increasing complexity, sophistication, toil, and fallibility of quantum algorithm development. We present Qualtran, an open-source library for representing and analyzing quantum algorithms. Using appropriate abstractions and data structures, we can simulate and test algorithms, automatically generate information-rich diagrams, and tabulate resource requirements. Qualtran offers a standard library of algorithmic building blocks that are essential for modern cost-minimizing compilations. Its capabilities are showcased through the re-analysis of key algorithms in Hamiltonian simulation, chemistry, and cryptography. Architecture-independent resource counts output by Qualtran can be forwarded to our implementation of cost models to estimate physical costs like wall-clock time and number of physical qubits assuming a surface-code architecture. Qualtran provides a foundation for explicit constructions and reproducible analysis, fostering greater collaboration within the growing quantum algorithm development community.

quant-ph

Expanding the reach of quantum optimization with fermionic embeddings

Quadratic programming over orthogonal matrices encompasses a broad class of hard optimization problems that do not have an efficient quantum representation. Such problems are instances of the little noncommutative Grothendieck problem (LNCG), a generalization of binary quadratic programs to continuous, noncommutative variables. In this work, we establish a natural embedding for this class of LNCG problems onto a fermionic Hamiltonian, thereby enabling the study of this classical problem with the tools of quantum information. This embedding is accomplished by a new representation of orthogonal matrices as fermionic quantum states, which we achieve through the well-known double covering of the orthogonal group. Correspondingly, the embedded LNCG Hamiltonian is a two-body fermion model. Determining extremal states of this Hamiltonian provides an outer approximation to the original problem, a quantum analogue to classical semidefinite relaxations. In particular, when optimizing over the \emph{special} orthogonal group our quantum relaxation obeys additional, powerful constraints based on the convex hull of rotation matrices. The classical size of this convex-hull representation is exponential in matrix dimension, whereas our quantum representation requires only a linear number of qubits. Finally, to project the relaxed solution back into the feasible space, we propose rounding procedures which return orthogonal matrices from appropriate measurements of the quantum state. Through numerical experiments we provide evidence that this rounded quantum relaxation can produce high-quality approximations.

quant-ph

Zero and Finite Temperature Quantum Simulations Powered by Quantum Magic

We introduce a quantum information theory-inspired method to improve the characterization of many-body Hamiltonians on near-term quantum devices. We design a new class of similarity transformations that, when applied as a preprocessing step, can substantially simplify a Hamiltonian for subsequent analysis on quantum hardware. By design, these transformations can be identified and applied efficiently using purely classical resources. In practice, these transformations allow us to shorten requisite physical circuit-depths, overcoming constraints imposed by imperfect near-term hardware. Importantly, the quality of our transformations is tunable: we define a 'ladder' of transformations that yields increasingly simple Hamiltonians at the cost of more classical computation. Using quantum chemistry as a benchmark application, we demonstrate that our protocol leads to significant performance improvements for zero and finite temperature free energy calculations on both digital and analog quantum hardware. Specifically, our energy estimates not only outperform traditional Hartree-Fock solutions, but this performance gap also consistently widens as we tune up the quality of our transformations. In short, our quantum information-based approach opens promising new pathways to realizing useful and feasible quantum chemistry algorithms on near-term hardware.

quant-ph

Fast emulation of fermionic circuits with matrix product states

We describe a matrix product state (MPS) extension for the Fermionic Quantum Emulator (FQE) software library. We discuss the theory behind symmetry adapted matrix product states for approximating many-body wavefunctions of spin-1/2 fermions, and we present an open-source, MPS-enabled implementation of the FQE interface (MPS-FQE). The software uses the open-source pyblock3 and block2 libraries for most elementary tensor operations, and it can largely be used as a drop-in replacement for FQE that allows for more efficient, but approximate, emulation of larger fermionic circuits. Finally, we show several applications relevant to both near-term and fault-tolerant quantum algorithms where approximate emulation of larger systems is expected to be useful: characterization of state preparation strategies for quantum phase estimation, the testing of different variational quantum eigensolver Ansätze, the numerical evaluation of Trotter errors, and the simulation of general quantum dynamics problems. In all these examples, approximate emulation with MPS-FQE allows us to treat systems that are significantly larger than those accessible with a full statevector emulator.

quant-ph

Tailored and Externally Corrected Coupled Cluster with Quantum Inputs

We propose to use wavefunction overlaps obtained from a quantum computer as inputs for the classical split-amplitude techniques, tailored and externally corrected coupled cluster, to achieve balanced treatment of static and dynamic correlation effects in molecular electronic structure simulations. By combining insights from statistical properties of matchgate shadows, which are used to measure quantum trial state overlaps, with classical correlation diagnostics, we are able to provide quantum resource estimates well into the classically no longer exactly solvable regime. We find that rather imperfect wavefunctions and remarkably low shot counts are sufficient to cure qualitative failures of plain coupled cluster singles doubles and to obtain chemically precise dynamic correlation energy corrections. We provide insights into which wavefunction preparation schemes have a chance of yielding quantum advantage, and we test our proposed method using overlaps measured on Google's Sycamore device.

quant-ph

Quantum Simulation of Realistic Materials in First Quantization Using Non-local Pseudopotentials

This paper improves and demonstrates the usefulness of the first quantized plane-wave algorithms for the quantum simulation of electronic structure, developed by Babbush et al. and Su et al. We describe the first quantum algorithm for first quantized simulation that accurately includes pseudopotentials. We focus on the Goedecker-Tetter-Hutter (GTH) pseudopotential, which is among the most accurate and widely used norm-conserving pseudopotentials enabling the removal of core electrons from the simulation. The resultant screened nuclear potential regularizes cusps in the electronic wavefunction so that orders of magnitude fewer plane waves are required for a chemically accurate basis. Despite the complicated form of the GTH pseudopotential, we are able to block encode the associated operator without significantly increasing the overall cost of quantum simulation. This is surprising since simulating the nuclear potential is much simpler without pseudopotentials, yet is still the bottleneck. We also generalize prior methods to enable the simulation of materials with non-cubic unit cells, which requires nontrivial modifications. Finally, we combine these techniques to estimate the block-encoding costs for commercially relevant instances of heterogeneous catalysis (e.g. carbon monoxide adsorption on transition metals) and compare to the quantum resources needed to simulate materials in second quantization. We conclude that for computational cells with many particles, first quantization often requires meaningfully less spacetime volume.

quant-ph

Quantum computation of stopping power for inertial fusion target design

Stopping power is the rate at which a material absorbs the kinetic energy of a charged particle passing through it -- one of many properties needed over a wide range of thermodynamic conditions in modeling inertial fusion implosions. First-principles stopping calculations are classically challenging because they involve the dynamics of large electronic systems far from equilibrium, with accuracies that are particularly difficult to constrain and assess in the warm-dense conditions preceding ignition. Here, we describe a protocol for using a fault-tolerant quantum computer to calculate stopping power from a first-quantized representation of the electrons and projectile. Our approach builds upon the electronic structure block encodings of Su et al. [PRX Quantum 2, 040332 2021], adapting and optimizing those algorithms to estimate observables of interest from the non-Born-Oppenheimer dynamics of multiple particle species at finite temperature. Ultimately, we report logical qubit requirements and leading-order Toffoli costs for computing the stopping power of various projectile/target combinations relevant to interpreting and designing inertial fusion experiments. We estimate that scientifically interesting and classically intractable stopping power calculations can be quantum simulated with roughly the same number of logical qubits and about one hundred times more Toffoli gates than is required for state-of-the-art quantum simulations of industrially relevant molecules such as FeMoCo or P450.

quant-ph

Fault-tolerant quantum simulation of materials using Bloch orbitals

The simulation of chemistry is among the most promising applications of quantum computing. However, most prior work exploring algorithms for block-encoding, time-evolving, and sampling in the eigenbasis of electronic structure Hamiltonians has either focused on modeling finite-sized systems, or has required a large number of plane wave basis functions. In this work, we extend methods for quantum simulation with Bloch orbitals constructed from symmetry-adapted atom-centered orbitals so that one can model periodic \textit{ab initio} Hamiltonians using only a modest number of basis functions. We focus on adapting existing algorithms based on combining qubitization with tensor factorizations of the Coulomb operator. Significant modifications of those algorithms are required to obtain an asymptotic speedup leveraging translational (or, more broadly, Abelian) symmetries. We implement block encodings using known tensor factorizations and a new Bloch orbital form of tensor hypercontraction. Finally, we estimate the resources required to deploy our algorithms to classically challenging model materials relevant to the chemistry of Lithium Nickel Oxide battery cathodes within the surface code.

quant-ph