arXiv subjects

Nicholas D. M. Hine

Publications and source records attributed to Nicholas D. M. Hine.

32 records · Page 2Linked to original sources

arXiv2015

The elevated Curie temperature and half-metallicity in the ferromagnetic semiconductor La$_{x}$Eu$_{1-x}$O

Here we study the effect of La doping in EuO thin films using SQUID magnetometry, muon spin rotation ($μ$SR), polarized neutron reflectivity (PNR), and density functional theory (DFT). The $μ$SR data shows that the La$_{0.15}$Eu$_{0.85}$O is homogeneously magnetically ordered up to its elevated $T_{\rm C}$. It is concluded that bound magnetic polaron behavior does not explain the increase in $T_{\rm C}$ and an RKKY-like interaction is consistent with the $μ$SR data. The estimation of the magnetic moment by DFT simulations concurs with the results obtained by PNR, showing a reduction of the magnetic moment per La$_{x}$Eu$_{1-x}$O for increasing lanthanum doping. This reduction of the magnetic moment is explained by the reduction of the number of Eu-4$f$ electrons present in all the magnetic interactions in EuO films. Finally, we show that an upwards shift of the Fermi energy with La or Gd doping gives rise to half-metallicity for doping levels as high as 3.2 %.

cond-mat.str-el↗

arXiv2015

Tracing potential energy surfaces of electronic excitations via their transition origins: application to Oxirane

We show that the transition origins of electronic excitations identified by quantified natural transition orbital (QNTO) analysis can be employed to connect potential energy surfaces (PESs) according to their character across a widerange of molecular geometries. This is achieved by locating the switching of transition origins of adiabatic potential surfaces as the geometry changes. The transition vectors for analysing transition origins are provided by linear response time-dependent density functional theory (TDDFT) calculations under the Tamm-Dancoff approximation. We study the photochemical CO ring opening of oxirane as an example and show that the results corroborate the traditional Gomer-Noyes mechanism derived experimentally. The knowledge of specific states for the reaction also agrees well with that given by previous theoretical work using TDDFT surface-hopping dynamics that was validated by high-quality quantum Monte Carlo calculations. We also show that QNTO can be useful for considerably larger and more complex systems: by projecting the excitations to those of a reference oxirane molecule, the approach is able to identify and analyse specific excitations of a trans-2,3-diphenyloxirane molecule.

cond-mat.mtrl-sci↗

arXiv2013

Simulations of Nanocrystals Under Pressure: Combining Electronic Enthalpy and Linear-Scaling Density-Functional Theory

We present an implementation in a linear-scaling density-functional theory code of an electronic enthalpy method, which has been found to be natural and efficient for the ab initio calculation of finite systems under hydrostatic pressure. Based on a definition of the system volume as that enclosed within an electronic density isosurface [Phys. Rev. Lett., 94, 145501 (2005)], it supports both geometry optimizations and molecular dynamics simulations. We introduce an approach for calibrating the parameters defining the volume in the context of geometry optimizations and discuss their significance. Results in good agreement with simulations using explicit solvents are obtained, validating our approach. Size-dependent pressure-induced structural transformations and variations in the energy gap of hydrogenated silicon nanocrystals are investigated, including one comparable in size to recent experiments. A detailed analysis of the polyamorphic transformations reveals three types of amorphous structures and their persistence on depressurization is assessed.

cond-mat.mes-hall↗

arXiv2013

Linear-scaling time-dependent density-functional theory in the linear response formalism

We present an implementation of time-dependent density-functional theory (TDDFT) in the linear response formalism enabling the calculation of low energy optical absorption spectra for large molecules and nanostructures. The method avoids any explicit reference to canonical representations of either occupied or virtual Kohn-Sham states and thus achieves linear-scaling computational effort with system size. In contrast to conventional localised orbital formulations, where a single set of localised functions is used to span the occupied and unoccupied state manifold, we make use of two sets of in situ optimised localised orbitals, one for the occupied and one for the unoccupied space. This double representation approach avoids known problems of spanning the space of unoccupied Kohn-Sham states with a minimal set of localised orbitals optimised for the occupied space, while the in situ optimisation procedure allows for efficient calculations with a minimal number of functions. The method is applied to a number of medium sized organic molecules and a good agreement with traditional TDDFT methods is observed. Furthermore, linear scaling of computational cost with system size is demonstrated on a system of carbon nanotubes.

cond-mat.mtrl-sci↗

arXiv2013

Anisotropic charge screening and supercell size convergence of defect formation energies

One of the main sources of error associated with the calculation of defect formation energies using plane-wave Density Functional Theory (DFT) is finite size error resulting from the use of relatively small simulation cells and periodic boundary conditions. Most widely-used methods for correcting this error, such as that of Makov and Payne, assume that the dielectric response of the material is isotropic and can be described using a scalar dielectric constant $ε$. However, this is strictly only valid for cubic crystals, and cannot work in highly-anisotropic cases. Here we introduce a variation of the technique of extrapolation based on the Madelung potential, that allows the calculation of well converged dilute limit defect formation energies in non-cubic systems with highly anisotropic dielectric properties. As an example of the implementation of this technique we study a selection of defects in the ceramic oxide Li$_2$TiO$_3$ which is currently being considered as a lithium battery material and a breeder material for fusion reactors.

cond-mat.mtrl-sci↗

arXiv2013

Importance of many body effects in the kernel of hemoglobin for ligand binding

We propose a mechanism for binding of diatomic ligands to heme based on a dynamical orbital selection process. This scenario may be described as bonding determined by local valence fluctuations. We support this model using linear-scaling first-principles calculations, in combination with dynamical mean-field theory, applied to heme, the kernel of the hemoglobin metalloprotein central to human respiration. We find that variations in Hund's exchange coupling induce a reduction of the iron 3d density, with a concomitant increase of valence fluctuations. We discuss the comparison between our computed optical absorption spectra and experimental data, our picture accounting for the observation of optical transitions in the infrared regime, and how the Hund's coupling reduces, by a factor of five, the strong imbalance in the binding energies of heme with CO and O_2 ligands.

cond-mat.str-el↗

arXiv2012

Bromophenyl functionalization of carbon nanotubes : an ab initio study

We study the thermodynamics of bromophenyl functionalization of carbon nanotubes with respect to diameter and metallic/insulating character using density-functional theory (DFT). On one hand, we show that the activation energy for the grafting of a bromophenyl molecule onto a semiconducting zigzag nanotube ranges from 0.73 eV to 0.76 eV without any clear trend with respect to diameter within numerical accuracy. On the other hand, the binding energy of a single bromophenyl molecule shows a clear diameter dependence and ranges from 1.51 eV for a (8,0) zigzag nanotube to 0.83 eV for a (20,0) zigzag nanotube. This is in part explained by the transition from sp2 to sp3 bonding occurring to a carbon atom of a nanotube when a phenyl is grafted to it and the fact that smaller nanotubes are closer to a sp3 hybridization than larger ones due to increased curvature. Since a second bromophenyl unit can attach without energy barrier next to an isolated grafted unit, they are assumed to exist in pairs. The para configuration is found to be favored for the pairs and their binding energy decreases with increasing diameter, ranging from 4.34 eV for a (7,0) nanotube to 2.27 eV for a (29,0) nanotube. An analytic form for this radius dependence is derived using a tight binding hamiltonian and first order perturbation theory. The 1/R^2 dependance obtained (where R is the nanotube radius) is verified by our DFT results within numerical accuracy. Finally, metallic nanotubes are found to be more reactive than semiconducting nanotubes, a feature that can be explained by a non-zero density of states at the Fermi level for metallic nanotubes.

cond-mat.mes-hall↗

arXiv2012

Vanadium dioxide : A Peierls-Mott insulator stable against disorder

Vanadium dioxide undergoes a first order metal-insulator transition at 340 K. In this work, we develop and carry out state of the art linear scaling DFT calculations refined with non-local dynamical mean-field theory. We identify a complex mechanism, a Peierls-assisted orbital selection Mott instability, which is responsible for the insulating M$_1$ phase, and furthermore survives a moderate degree of disorder.

cond-mat.str-el↗

arXiv2012

Calculating dispersion interactions using maximally-localized Wannier functions

We investigate a recently developed approach [P. L. Silvestrelli, Phys. Rev. Lett. 100, 053002 (2008); J. Phys. Chem. A 113, 5224 (2009)] that uses maximally localized Wannier functions to evaluate the van der Waals contribution to the total energy of a system calculated with density-functional theory. We test it on a set of atomic and molecular dimers of increasing complexity (argon, methane, ethene, benzene, phthalocyanine, and copper phthalocyanine) and demonstrate that the method, as originally proposed, has a number of shortcomings that hamper its predictive power. In order to overcome these problems, we have developed and implemented a number of improvements to the method and show that these modifications give rise to calculated binding energies and equilibrium geometries that are in closer agreement to results of quantum-chemical coupled-cluster calculations.

cond-mat.mtrl-sci↗

arXiv2012

Fermi level pinning can determine polarity in semiconductor nanorods

First-principles calculations of polar semiconductor nanorods reveal that their dipole moments are strongly influenced by Fermi level pinning. The Fermi level for an isolated nanorod is found to coincide with a significant density of electronic surface states at the end surfaces, which are either mid-gap states or band-edge states. These states pin the Fermi level, and therefore fix the potential difference across the rod. We provide evidence that this effect can have a determining influence on the polarity of nanorods, and has consequences for the way a rod responds to changes in its surface chemistry, the scaling of its dipole moment with its size, and the dependence of polarity on its composition.

cond-mat.mes-hall↗

arXiv2012

Linear-scaling DFT+U with full local orbital optimization

We present an approach to the DFT+U method (Density Functional Theory + Hubbard model) within which the computational effort for calculation of ground state energies and forces scales linearly with system size. We employ a formulation of the Hubbard model using nonorthogonal projector functions to define the localized subspaces, and apply it to a local-orbital DFT method including in situ orbital optimization. The resulting approach thus combines linear-scaling and systematic variational convergence. We demonstrate the scaling of the method by applying it to nickel oxide nano-clusters with sizes exceeding 7,000 atoms.

cond-mat.str-el↗

arXiv2011

Calculating optical absorption spectra for large systems using linear-scaling density-functional theory

A new method for calculating optical absorption spectra within linear-scaling density-functional theory (LS-DFT) is presented, incorporating a scheme for optimizing a set of localized orbitals to accurately represent unoccupied Kohn-Sham states. Three different schemes are compared and the most promising of these, based on the use of a projection operator, has been implemented in a fully-functional LS-DFT code. The method has been applied to the calculation of optical absorption spectra for the metal-free phthalocyanine molecule and the conjugated polymer poly(para-phenylene). Excellent agreement with results from a traditional DFT code is obtained.

cond-mat.mtrl-sci↗

arXiv2011

Factors influencing the distribution of charge in polar nanocrystals

We perform first-principles calculations of wurtzite GaAs nanorods to explore the factors determining charge distributions in polar nanostructures. We show that both the direction and magnitude of the dipole moment $\mathbf{d}$ of a nanorod, and its electic field, depend sensitively on how its surfaces are terminated and do not depend strongly on the spontaneous polarization of the underlying lattice. We identify two physical mechanisms by which $\mathbf{d}$ is controlled by the surface termination, and we show that the excess charge on the nanorod ends is not strongly localized. We discuss the implications of these results for tuning nanocrystal properties, and for their growth and assembly.

cond-mat.mes-hall↗

arXiv2010

Projector self-consistent DFT+U using non-orthogonal generalized Wannier functions

We present a formulation of the density-functional theory + Hubbard model (DFT+U) method that is self-consistent over the choice of Hubbard projectors used to define the correlated subspaces. In order to overcome the arbitrariness in this choice, we propose the use of non-orthogonal generalized Wannier functions (NGWFs) as projectors for the DFT+U correction. We iteratively refine these NGWF projectors and, hence, the DFT+U functional, such that the correlated subspaces are fully self-consistent with the DFT+U ground-state. We discuss the convergence characteristics of this algorithm and compare ground-state properties thus computed with those calculated using hydrogenic projectors. Our approach is implemented within, but not restricted to, a linear-scaling DFT framework, opening the path to DFT+U calculations on systems of unprecedented size.

cond-mat.mtrl-sci↗