arXiv subjects

Nicholas J. Ekins-Daukes

Publications and source records attributed to Nicholas J. Ekins-Daukes.

10 recordsLinked to original sources

arXiv2026

Combined photoluminescence and electrical characterization of valley photovoltaic devices explained with an equivalent circuit

We present an equivalent-circuit analysis that simultaneously considers the photoluminescence and electrical responses of valley photovoltaic devices. Valley photovoltaics (VPV) are a novel concept for hot-carrier solar cells, where intervalley scattering of electrons in the absorbing material helps maintain the conduction-band electron populations at metastable satellite valleys, which are at energies higher than the conduction-band minimum. We measure intensity- and voltage-dependent photoluminescence and electrical signals of a VPV device, which has previously shown S-shaped current-voltage characteristics and thus low efficiency. We present an equivalent circuit that captures the S-shaped current-voltage curves and simultaneously describes our photoluminescence and electric measurements. The equivalent-circuit model indicates that a reverse diode causes inefficient extraction of electrons and thus the S shape. We use a Poisson/drift-diffusion model to demonstrate that the reverse diode can be either explained by the valley-scattering process itself or a heterojunction barrier. The reverse diode must be eliminated before VPV devices can achieve high efficiency.

physics.app-ph↗

arXiv2026

Multiplexing approaches to thermoradiative signatureless communications

Using mid-infrared emission from semiconductor devices for covert communications remains a relatively unexplored and yet promising opportunity. The phenomenon of negative luminescence allows for a method of signatureless covert communications where the net infrared emission of an emitting optoelectronic device is balanced to be identical to the ambient thermal background. In this work we provide a practical demonstration of covert data transfer over a thermoradiative channel with data rates up to 100 kbps. In addition, we demonstrate several additional multiplexing techniques that make the proposed thermoradiative communications method more secure against interception by achieving zero instantaneous optical emission, while remaining detectable if a sufficiently spatially or spectrally discerning observation is utilised. Finally, we discuss various application scenarios in which the proposed methods can be used to achieve secure signatureless communications.

physics.app-ph↗

arXiv2026

Anomalous Platinum and Oxygen Transport during Electroforming of NbOx Memristors

Electroforming of metal-oxide-metal memristors is generally attributed to the creation of oxygen-vacancy filaments within the oxide, with noble metal electrodes such as Pt and Au remaining chemically inert. Here, we demonstrate that electroforming and subsequent operation of Pt/NbOx/Nb2O5/Pt devices can induce an unexpected and highly correlated redistribution of both oxygen and platinum. Time-of-flight secondary ion mass spectrometry reveals a filamentary pathway characterized by micrometer-scale oxygen enrichment extending from the Nb2O5 layer through NbOx and deep into the Pt top electrode. Surprisingly, this is accompanied by the formation of a Pt-rich filament penetrating the oxide stack along the same filamentary path. Finite-element and lumped-element modelling show that current-controlled negative-differential-resistance operation produces localized Joule heating and high-frequency thermal cycling, which strongly enhances oxygen migration and enables thermally assisted Pt diffusion along vacancy-rich pathways. These findings reveal a previously unrecognized metal-ion transport mechanism in NbOx memristors and highlight the critical role of post-forming electrical dynamics in determining filament chemistry, stability, and device reliability.

cond-mat.mtrl-sci↗

arXiv2026

High-Mobility Indium Native Oxide Transistors via Liquid-Metal Printing in Air

Oxide semiconductors have emerged as common channel materials in transistors and hold promise for next-generation electronics, yet achieving high mobility typically requires costly vacuum-based techniques. Here, ultrathin (5-nm) indium native oxide (InOx) prepared by ambient-air liquid-metal printing (LMP) at low temperature (250 °C), is applied as semiconducting channel in field-effect transistor (FET). The resulting InOx is found to be polycrystalline with large lateral grains that extend vertically throughout the film thickness. InOx FETs in a transfer length method (TLM) configuration demonstrate a high conductivity mobility (uCON) of 125 cm2 V-1 s-1, with systematic analysis of contact resistance confirming potential for channel length scaling. Integration with atomic-layer-deposited (ALD) gate dielectrics further reveals excellent compatibility, for instance, InOx FET integrated with HfO2 exhibits a high field-effect mobility (uFE) of 107 cm2 V-1 s-1, an on/off current ratio (ION/IOFF) of >107, a subthreshold swing (SS) of 204 mV dec-1, a gate leakage of <10-6 A cm-2, while maintaining stable performance over 104 endurance cycles without degradation. Post-fabrication oxygen-plasma treatment is applied to achieve enhancement-mode operation and a depletion-load inverter is demonstrated, exhibiting a voltage gain of 69.8 V/V. These results demonstrate the great potential of LMP InOx as semiconducting channel in high-performance and power-efficient transistors for next-generation oxide electronics.

cond-mat.mtrl-sci↗

arXiv2025

Liquid Metal-Exfoliated SnO$_2$-Based Mixed-dimensional Heterostructures for Visible-to-Near-Infrared Photodetection

Ultra-thin two-dimensional (2D) materials have gained significant attention for making next-generation optoelectronic devices. Here, we report a large-area heterojunction photodetector fabricated using a liquid metal-printed 2D $\text{SnO}_2$ layer transferred onto CdTe thin films. The resulting device demonstrates efficient broadband light sensing from visible to near-infrared wavelengths, with enhanced detectivity and faster photo response than bare CdTe photodetectors. Significantly, the device shows a nearly $10^5$-fold increase in current than the dark current level when illuminated with a 780 nm laser and achieves a specific detectivity of around $10^{12} \, \text{Jones}$, nearly two orders of magnitude higher than a device with pure CdTe thin film. Additionally, temperature-dependent optoelectronic testing shows that the device maintains a stable response up to $140^\circ \text{C}$ and generates distinctive photocurrent at temperatures up to $80^\circ \text{C}$, demonstrating its thermal stability. Using band structure analysis, density functional theory (DFT) calculations, and photocurrent mapping, the formation of a $p$-$n$ junction is indicated, contributing to the enhanced photo response attributed to the efficient carrier separation by the built-in potential in the hetero-junction and the superior electron mobility of 2D $\text{SnO}_2$. Our results highlight the effectiveness of integrating liquid metal-exfoliated 2D materials for enhanced photodetector performance.

cond-mat.mtrl-sci↗

arXiv2023

On the energy conversion efficiency of the bulk photovoltaic effect

The bulk photovoltaic effect (BPVE) leads to directed photo-currents and photo-voltages in bulk materials. Unlike photo-voltages in p-n junction solar cells that are limited by carrier recombination to values below the bandgap energy of the absorbing material, the BPVE photo-voltages have been shown to greatly exceed the bandgap energy. Therefore the BPVE is not subject to the Shockley-Queisser limit for sunlight to electricity conversion in single junction solar cells and experimental claims of efficiencies beyond this limit have been made. Here, we show that BPVE energy conversion efficiencies are, in practice, orders of magnitude below the Shockley-Queisser limit of single junction solar cells and are subject to different, more stringent limits. The name BPVE stands for two different fundamental effects, the shift current and the injection current. In both of these, the voltage bias necessary to produce electrical energy, accelerates both, intrinsic and photo-generated, carriers. We discuss how energy conservation alone fundamentally limits the BPVE to a bandgap-dependent value that exceeds the Shockley Queisser limit only for very small bandgaps. Yet, small bandgap materials have a large number of intrinsic carriers, leading to high conductivity which suppresses the photo-voltage. We discuss further how slightly more stringent fundamental limits for injection (ballistic) currents may be derived from the trade-off between high resistivity, needed for a high voltage, and long ballistic transport length, needed for a high current. We also explain how erroneous experimental and theoretical claims of high efficiency have arisen. Finally, we calculate the energy conversion efficiency for an example 2D material that has been suggested as candidate material for high efficiency BPVE based solar cells and show that the efficiency is very similar to the efficiency of known 3D materials.

physics.app-ph↗

arXiv2022

Compositional dependence of direct transition energies in Si$_x$Ge$_{1-x-y}$Sn$_y$ alloys lattice-matched to Ge/GaAs

Si$_x$Ge$_{1-x-y}$Sn$_y$ ternary alloys are a candidate material system for use in solar cells and other optoelectronic devices. We report on the direct transition energies and structural properties of Ge-rich Si$_x$Ge$_{1-x-y}$Sn$_y$ alloys with six different compositions up to 10 % Si and 3 % Sn, lattice-matched to Ge or GaAs substrates. The direct transitions occurring between 0.9 and 5.0 eV were investigated using spectroscopic ellipsometry (SE), and the resulting data was used to obtain the dielectric functions of the Si$_x$Ge$_{1-x-y}$Sn$_y$n layer by fitting a multi-layer model. Values for the $E_0$, $E_1$, $Δ_1$, $E_0'$ and $E_2$ transition energies were then found by differentiating these dielectric functions to extract the locations of critical points. Structurally, the composition of the samples was measured using energy-dispersive X-ray measurements (EDX). The lattice constants predicted from these compositions are in good agreement with reciprocal space maps obtained through X-ray diffraction (XRD). The results confirm that a 1 eV direct absorption edge can be achieved using relatively low Si and Sn fractions ($<$ 10 % and $<$ 3 % respectively), while the higher-energy critical points show smaller shifts relative to Ge and match results previously observed or predicted in the literature.

cond-mat.mtrl-sci↗

arXiv2022

Electronic and optical properties of Si$_{x}$Ge$_{1-x-y}$Sn$_{y}$ alloys lattice-matched to Ge

We present a combined experimental and theoretical analysis of the evolution of the near-band gap electronic and optical properties of Si$_{x}$Ge$_{1-x-y}$Sn$_{y}$ alloys lattice-matched to Ge and GaAs substrates. We perform photoreflectance (PR) and photoluminescence (PL) measurements on Si$_{x}$Ge$_{1-x-y}$Sn$_{y}$ epitaxial layers grown via chemical vapour deposition, for Si (Sn) compositions up to $x =$ 9.6% ($y =$ 2.5%). Our measurements indicate the presence of an indirect fundamental band gap, with PL observed $\approx$ 200-250 meV lower in energy than the direct $E_0$ transition identified by PR measurements. The measured PL is Ge-like, suggesting that the alloy conduction band (CB) edge is primarily derived from the Ge L-point CB minimum. Interpretation of the PR and PL measurements is supported by atomistic electronic structure calculations. Effective alloy band structures calculated via density functional theory confirm the presence of an indirect fundamental band gap, and reveal the origin of the observed inhomogeneous broadening of the measured optical spectra as being alloy-induced band hybridisation occurring close in energy to the CB edge. To analyze the evolution of the band gap, semi-empirical tight-binding (TB) calculations are employed to enable calculations for large supercell sizes. TB calculations reveal that the alloy CB edge is hybridized in nature, consisting at low Si and Sn compositions of an admixture of Ge L-, $Γ$- and X-point CB edge states, and confirm that the alloy CB edge retains primarily Ge L-point CB edge character. Our experimental measurements and theoretical calculations confirm a direct transition energy close to 1 eV in magnitude for Si and Sn compositions $x =$ 6.8 - 9.6% and $y =$ 1.6 - 2.2%.

cond-mat.mtrl-sci↗

arXiv2020

Optoelectronic Reciprocity in Hot Carrier Solar Cells with Ideal Energy Selective Contacts

Hot carrier solar cells promise theoretical power conversion efficiencies far beyond the single junction limit. However, practical implementations of hot carrier solar cells have lagged far behind those theoretical predictions. Reciprocity relations for electro-luminescence from conventional single junction solar cells have been extremely successful in driving their efficiency ever closer to the theoretical limits. In this work, we discuss how the signatures of a functioning hot carrier device should manifest experimentally in electro-luminescence and dark $I-V$ characteristics. Hot carrier properties lead to deviations from the Shockley diode equation that is typical for conventional single junction solar cells. These deviations are directly linked to an increase in temperature of the carriers and therefore the temperature measured from electro-luminescence spectra. We also elucidate how the behaviour of hot carrier solar cells in the dark depends on whether Auger processes play a significant role, revealing a stark contrast between the regime of negligible Auger recombination (carrier conservation model) and dominant Auger recombination (Impact Ionization model) for hot carrier solar cells.

physics.app-ph↗

arXiv2018

Performance Analysis and Fault Diagnosis Method for Concentrator Photovoltaic Modules

Concentrator Photovoltaic (CPV) systems use high efficiency multi-junction solar cells with efficiencies >40%, but the module efficiency is often much lower. The increased complexity of a CPV module, with optics, receiver and the tracker gives an increased probability that faults will arise during the operational lifetime. In addition, a location like India has varied atmospheric conditions that further complicates the diagnosis of faults. It is therefore important to decouple effects due to the external environment (such as the atmosphere) from effects due to the degradation of the module. By applying a computer model to outdoor CPV test data in Bangalore, India we have established a method to assess the performance of the CPV module and finally we present a method to diagnose faults in the module.

eess.SY↗