SearcharxivSearch

arXiv subjects

Nick Montifiore

Publications and source records attributed to Nick Montifiore.

5 recordsLinked to original sources

Single- and Two-Qubit Gates Driven by an Integrated Photonic Laser

Trapped ions are a leading technology for quantum computing, but their reliance on bespoke tabletop laser and optical systems remains a major obstacle to scaling and robustness. Integrated silicon nitride lasers, compatible with future monolithic integration with surface electrode ion traps, have recently demonstrated frequency-selective qubit state preparation and measurement as well as interrogation of an optical clock transition. However, coherent qubit gates driven by integrated laser sources have not yet been demonstrated because coherent quantum logic imposes substantially more stringent performance requirements on the laser. Here, we use a visible-wavelength integrated Brillouin laser stabilized to an integrated coil resonator to drive coherent single- and two-qubit gates with $^{88}$Sr$^+$ optical qubits. We measure an average single-qubit fidelity of 99.61% $\pm$ 0.03% per Clifford gate with randomized benchmarking and use a two-qubit M{\o}lmer-S{\o}rensen interaction to generate an entangled Bell state with a fidelity of 92.35% $\pm$ 1.50%. The qubit exhibits a bare Ramsey coherence time of 660 $\pm$ 9 $\mu$s, extended to 1.750 $\pm$ 0.033 ms by spin echo. These results demonstrate that integrated visible-wavelength narrow-linewidth photonic lasers can meet the phase-noise requirements for coherent trapped ion quantum logic, providing a path for scalable optical systems integrated within trapped ion quantum processors.

quant-ph

Ultra-Low-Noise Brillouin Hybrid Synthetic Laser for Sub-Hertz Lattice Clock Spectroscopy

Frequency-stable lasers enable high-fidelity quantum state manipulation, which forms the basis of optical atomic clocks, quantum sensing, and quantum computation. Performing state manipulations at increasingly high speeds requires attention to laser frequency noise at high Fourier (carrier-offset) frequencies that cannot be addressed by traditional cavity stabilization alone. Scalable operations also benefit from device miniaturization. Here, we demonstrate a hybrid laser stabilization approach that combines ultrahigh frequency stability of a cryogenic silicon cavity with high-Fourier-frequency noise suppression of an integrated Brillouin laser. The combined system suppresses frequency noise over a Fourier span of more than 7 decades, yielding a <1 Hz phase-integrated linewidth and 0.2 Hz^2/Hz frequency noise at Fourier frequencies above 10 MHz. The performance of this hybrid laser is confirmed by sub-Hz Rabi spectroscopy with a three-dimensional ^{87}Sr lattice clock. This work demonstrates record-low frequency noise at 698 nm over an extensive Fourier frequency range and highlights the promise of precision clock spectroscopy using a chip-scale integrated laser technology.

physics.optics

Blue to Near-IR Integrated PZT Silicon Nitride Modulators for Quantum and Atomic Applications

Modulation and control of lasers and optical signals is necessary for trapped-ion and cold neutral atom quantum systems. Given the diversity of atomic species, experimental modalities, and architectures, integrated optical modulators designed to operate across the visible to near-infrared spectrum are a key step towards portable, robust, and compact quantum computers, clocks, and sensors. Integrated optical modulators that are wavelength-independent, CMOS-compatible, and capable of maintaining low waveguide losses and a high resonator quality factor, DC-coupled broadband frequency response, and low power consumption, are essential for scalable photonic integration. Yet progress towards these goals has remained limited. Here we demonstrate four types of integrated stress-optic lead zirconate titanate (PZT) silicon nitride modulators: a coil Mach-Zehnder modulator, a coil pure phase modulator, and bus-coupled and add-drop ring resonator modulators, with operation from 493 nm to 780 nm. The coil MZM operates at 532 nm with a V${\pi}$ of 2.8V, a 0.4 MHz 3-dB bandwidth, and an extinction ratio of 21.5dB. The coil phase modulator operates at 493 nm with a V${\pi}$ of 2.8V and low residual amplitude modulation of -34 dB at a 1kHz offset. The bus-coupled ring resonator modulator operates at 493 nm and the add-drop ring resonator modulator operates at 780 nm. The ring-based modulators have an intrinsic quality factor of 3.4 million and 1.9 million, a linear tuning strength of 0.9 GHz/V and 1 GHz/V, and a 3-dB bandwidth of 2.6 MHz and 10 MHz, respectively. All four modulator designs maintain the low optical waveguide loss of SiN, are DC coupled with broadband frequency response, operate independent of wavelength, and consume only tens of nW per actuator. Such solutions unlock the potential for further integration with other precision SiN components to realize chip-scale atomic and quantum systems.

physics.optics

Sub-Doppler rubidium atom cooling using a programmable agile integrated PZT-on-SiN resonator

Programmability and precise control of laser frequency are essential for quantum experiments and applications such as atomic clocks, quantum computers, and cold-atom sensors. Current systems use bulky, power-hungry modulators and frequency shifters which are difficult to integrate and limit portability and scalability. We report an electrically controllable, agile optical frequency source based on a semiconductor laser stabilized to a photonic-integrated, lead zirconate titanate (PZT)-actuated resonator cavity. We demonstrate this approach with precision programmable frequency control of a 780-nm laser that can periodically reference to rubidium spectroscopy followed by fast, programmable, arbitrary frequency tuning sequences for quantum control. We use this approach to demonstrate sub-Doppler cooling of rubidium-87 without any external modulators, achieving atom-cloud temperatures as low as 16 $\mu$K. The device achieves a tuning strength up to 1 GHz/V with 11 MHz modulation bandwidth while consuming only 10 nW of electrical power. This work establishes a route toward compact, low-power, and chip-scale laser systems for next-generation quantum and atomic sensing technologies.

physics.optics

Octave Spanning Visible to SWIR Integrated Coil-Stabilized Brillouin Lasers

Narrow linewidth stabilized lasers are central to precision applications that operate across the visible to short-wave infrared wavelengths, including optical clocks, quantum sensing and computing, ultra-low noise microwave generation, and fiber sensing. Today, these spectrally pure sources are realized using multiple external cavity tabletop lasers locked to bulk-optic free-space reference cavities. Integration of this technology will enable portable precision applications with improved reliability and robustness. Here, we report wavelength-flexible design and operation, over more than an octave span, of an integrated coil-resonator-stabilized Brillouin laser architecture. Leveraging a versatile two-stage noise reduction approach, we achieve low linewidths and high stability with chip-scale laser designs based on the ultra-low-loss, CMOS-compatible silicon nitride platform. We report operation at 674 and 698 nm for applications to strontium neutral and trapped-ion clocks, quantum sensing and computing, and at 1550 nm for applications to fiber sensing and ultra-low phase noise microwave generation. Over this range we demonstrate frequency noise reduction from 1 Hz to 10 MHz resulting in 1.0 Hz -17 Hz fundamental and 181 Hz - 630 Hz integral linewidths and an Allan deviation of 6.5 x 10-13 at 1 ms for 674 nm, 6.0 x 10-13 at 15 ms for 698 nm, and 2.6 x10-13 at 15 ms for 1550 nm. This represents the lowest achieved linewidths and highest stability for integrated stabilized Brillouin lasers over an order of magnitude improvement in operating wavelength range. These results unlock the potential of integrated, ultra-low-phase-noise stabilized lasers for precision applications and further integration in systems-on-chip solutions.

physics.optics