arXiv subjects

Nicola Colonna

Publications and source records attributed to Nicola Colonna.

At least 19 recordsLinked to original sources

arXiv2026

Efficient nonequilibrium electron dynamics from first-principles: leveraging Koopmans spectral functionals and Wannier localization

We present an efficient first-principles approach for simulating the nonequilibrium electron dynamics in extended systems beyond the linear regime. The method combines Koopmans-compliant functionals, which provide an accurate quasiparticle band structures, with the real-time evolution of the electronic density matrix in a Wannier basis within the Hartree plus screened exchange (HSEX) approximation. The locality of the orbital basis enables physically motivated approximations that significantly reduce both the computational cost and memory requirements while preserving accuracy. The screened Coulomb interaction, the central ingredient of the HSEX self-energy, is computed efficiently using density-functional perturbation theory. We benchmark the approach in the linear regime against experimental spectra and reference Green's function calculations for systems featuring both weakly and strongly bound excitons. Moving to the nonlinear regime, we investigate high-harmonic generation (HHG) in silicon and lithium fluoride. While in silicon the HHG spectrum is largely governed by the quasiparticle band structure, in LiF, a material featuring strong excitonics effect, the harmonic emission is selectively enhanced at excitonic resonances, suggesting that HHG probes correlated electron-hole excitations rather than solely the quasiparticle band structure. The present framework enables fully \textit{ab-initio} simulations of excitonic effects in nonlinear optical spectra at a significantly reduced computational cost compared to real-time Green's function approaches, providing an efficient route to the study of ultrafast and strong-field phenomena in solids.

cond-mat.mtrl-sci↗

arXiv2026

Electronic excitations in the Shastry-Sutherland compound SrCu$_2$(BO$_3$)$_2$

SrCu2(BO3)2 (SCBO) is a paradigmatic realization of the Shastry-Sutherland model, hosting geometrically frustrated spin dimers and a variety of quantum magnetic phases and phenomena. Although its magnetic properties have been extensively studied, the high-energy electronic excitations that determine the crystal-field environment and Cu-O hybridization have remained largely unexplored. Here we combine Cu L3-edge resonant inelastic x-ray scattering (RIXS), broadband optical spectroscopy, and electronic-structure calculations to determine the relevant local and interband excitation energy scales in SCBO. RIXS resolves a well-defined manifold of localized Cu2+ d-d excitations between 1.8 and 2.4 eV, whose energies and polarization dependence are well reproduced by multireference quantum-chemistry calculations. In contrast, optical spectroscopy identifies charge-transfer excitations with an absorption onset near 1.2-1.6 eV and a broader higher-energy structure around 4.5 eV, which are qualitatively captured by DFT+U calculations. Taken together, these results define the characteristic energy scales of d-d and CT excitations, offering quantitative benchmarks for computational frameworks and providing essential input for refining superexchange-based magnetic models of this prototypical frustrated quantum antiferromagnet.

cond-mat.str-el↗

arXiv2026

Direct observation of strain and confinement shaping the hole subbands of Ge quantum wells

Germanium-silicon-germanium (Ge/Si$_{x}$Ge$_{1-x}$) heterostructures have emerged as a promising platform for hole-spin quantum technologies and high-mobility electronics, where strain and quantum confinement strongly reshape the Ge valence bands. However, the momentum-resolved valence-band structure of buried strained Ge quantum wells has so far been inferred only indirectly. Here we use soft X-ray angle-resolved photoemission spectroscopy (SX-ARPES) to directly probe the electronic structure of strained Ge quantum wells embedded in SiGe barriers. We resolve strain-split and size-quantized valence subbands, determine their heavy-hole, light-hole and split-off composition, and measure the valence-band offset at the Ge/SiGe heterojunction. Comparison with ab initio calculations shows that an accurate description requires explicit inclusion of the confinement potential imposed by the SiGe barrier, which plays a decisive role in determining the dispersion, ordering and mixing of the hole states. Our results provide the first direct experimental picture of how strain and confinement determine the valence-band structure of Ge quantum wells, establishing a foundation for predictive modelling of hole-spin qubits and high-mobility devices based on group-IV heterostructures.

cond-mat.mtrl-sci↗

arXiv2026

All-optical control of second-harmonic generation in $\beta$-BaB$_2$O$_4$ via coherent, terahertz-driven acentric lattice displacement

Dynamical control of the nonlinear optical properties of solids -- with light itself -- will be essential for future ultrafast photonic technologies. Previously, methods to modulate nonlinear processes including second-harmonic generation (SHG) have relied primarily on non-resonant light-matter interaction or photo-generation of hot electrons in nanoscale materials. However, these approaches are typically constrained by limited interaction lengths and the initial frequency conversion is relatively weak under equilibrium conditions. Here, an approximately 30\% modulation of efficient phase-matched SHG in bulk beta-barium borate (beta-BaB2O4) is achieved through transient lattice deformation by intense terahertz (THz) pulses that are tuned to resonance with an infrared-active phonon mode. The effect originates from modification of the index of refraction ellipsiod and the corresponding nonlinear phase-matching conditions, rather than from direct modulation of the nonlinear susceptibility through THz-mediated chi^(3) processes. This mechanism, of resonant selective lattice excitation, points toward novel THz-control schemes to tune the nonlinear optical response in materials.

physics.optics↗

arXiv2025

Measurement of the $^{35}Cl(n, p)^{35}S$ cross-section at the CERN n\_TOF facility from subthermal energy to 120 keV

Background: The $^{35}Cl(n, p)^{35}S$ reaction is of special interest in three different applications. First, in Boron Neutron Capture Therapy due to the presence of $^{35}Cl$ in brain and skin tissue. Second, it is involved in the creation of $^{36}S$, whose astrophysical origin remains unresolved. Third, in the designing of fast nuclear reactors of new generation based on molten salts. Purpose: To measure the $^{35}Cl(n, p)^{35}S$ cross-section from thermal energy to 120 keV, determine the resonance parameters in this range and Maxwellian Averaged Cross-Section (MACS). Method: We made use of the Time-of-Flight technique with microMEGAS detectors at Experimental Area 2 (EAR-2) of n\_TOF facility at CERN. The $^{10}B(n, \alpha)^{7}Li$ and $^{235}U(n, f)$ reactions were used as references. Rutherford Back-scattering Spectrometry technique was performed at Centro Nacional de Aceleradores (CNA) in Sevilla, in order to accurately determine the masses of the irradiated samples. Results: We obtain a thermal cross-section of $0.470 \pm 0.009$ barns. The $1/v$ energy dependence of the cross-section is observed up to the first resonance at 0.398 keV, the resonances up to 120 keV are analyzed and MACS calculated for $k_{B} T$ from 1 to 100 keV. Conclusions: The $^{35}Cl(n, p)^{35}S$ cross-section has been obtained over a wide energy range for the first time, with high accuracy across the aforementioned range. The thermal cross-section and first two resonances are in agreement with latest evaluation in ENDF/B-VIII.1, while lower resonance strength was found for high energy resonances. These data are used to calculate the MACS for different $k_{B} T$.

nucl-ex↗

arXiv2025

Carrier mobilities and electron-phonon interactions beyond DFT

Electron-phonon coupling is a key interaction that governs diverse physical processes such as carrier transport, superconductivity, and optical absorption. Calculating such interactions from first-principles with methods beyond density-functional theory remains a challenge. We introduce here a finite-difference framework for computing electron-phonon couplings for any electronic structure method that provides eigenvalues and eigenvectors, and showcase applications for hybrid and Koopmans functionals, and $GW$ many-body perturbation theory. Our approach introduces a novel projectability scheme based on eigenvalue differences and bypasses many of the limitations of the direct finite difference methods. It also leverages symmetries to reduce the number of independent atomic displacements, thereby keeping computational costs manageable. This approach enables seamless integration with established first-principles codes for generating displaced supercells, performing Wannier interpolations, and evaluating transport properties. Applications to silicon and gallium arsenide show that advanced electronic-structure functionals predict different electron-phonon couplings and modify band curvatures, resulting in much more accurate estimates of intrinsic carrier drift mobilities and effective masses. In general, our method provides a robust and accessible framework for exploring electron-phonon interactions in complex materials with state-of-the-art electronic structure methods.

cond-mat.mtrl-sci↗

arXiv2024

Flat-band hybridization between $f$ and $d$ states near the Fermi energy of SmCoIn$_5$

We present high-quality angle-resolved photoemission (ARPES) and density functional theory calculations (DFT+U) of SmCoIn$_5$. We find broad agreement with previously published studies of LaCoIn$_5$ and CeCoIn$_5$, confirming that the Sm $4f$ electrons are mostly localized. Nevertheless, our model is consistent with an additional delocalized Sm component, stemming from hybridization between the $4f$ electrons and the metallic bands at "hot spot" positions in the Brillouin zone. The dominant hot spot, called $γ_Z$, is similar to a source of delocalized $f$ states found in previous experimental and theoretical studies of CeCoIn$_5$. In this work, we identify and focus on the role of the Co $d$ states in exploring the relationship between heavy quasiparticles and the magnetic interactions in SmCoIn$_5$, which lead to a magnetically ordered ground state from within an intermediate valence scenario. Specifically, we find a globally flat band consisting of Co $d$ states near $E=-0.7$ eV, indicating the possibility of enhanced electronic and magnetic interactions in the "115" family of materials through localization in the Co layer, and we discuss a possible origin in geometric frustration. We also show that the delocalized Sm $4f$ states can hybridize directly with the Co $3d_{xz}$/$3d_{yz}$ orbitals, which occurs in our model at the Brillouin zone boundary point $R$ in a band that is locally flat and touches the Fermi level from above. Our work identifies microscopic ingredients for additional magnetic interactions in the "115" materials beyond the RKKY mechanism, and strongly suggests that the Co $d$ bands are an important ingredient in the formation of both magnetic and superconducting ground states.

cond-mat.str-el↗

arXiv2024

Spin-dependent interactions in orbital-density-dependent functionals: non-collinear Koopmans spectral functionals

The presence of spin-orbit coupling or non-collinear magnetic spin states can have dramatic effects on the ground-state and spectral properties of materials, in particular on the band structure. Here, we develop non-collinear Koopmans-compliant functionals based on Wannier functions and density-functional perturbation theory, targeting accurate spectral properties in the quasiparticle approximation. Our non-collinear Koopmans-compliant theory involves functionals of four-component orbitals densities, that can be obtained from the charge and spin-vector densities of Wannier functions. We validate our approach on four emblematic non-magnetic and magnetic semiconductors where the effect of spin-orbit coupling goes from small to very large: the III-IV semiconductor GaAs, the transition-metal dichalcogenide WSe$_2$, the cubic perovskite CsPbBr$_3$, and the ferromagnetic semiconductor CrI$_3$. The predicted band gaps are comparable in accuracy to state-of-the-art many-body perturbation theory and include spin-dependent interactions and screening effects that are missing in standard diagrammatic approaches based on the random phase approximation. While the inclusion of orbital- and spin-dependent interactions in many-body perturbation theory requires self-screening or vertex corrections, they emerge naturally in the Koopmans-functionals framework.

cond-mat.mtrl-sci↗

arXiv2023

koopmans: an open-source package for accurately and efficiently predicting spectral properties with Koopmans functionals

Over the past decade we have developed Koopmans functionals, a computationally efficient approach for predicting spectral properties with an orbital-density-dependent functional framework. These functionals impose a generalized piecewise linearity condition to the entire electronic manifold, ensuring that orbital energies match the corresponding electron removal/addition energy differences (in contrast to semi-local DFT, where a mismatch between the two lies at the heart of the band gap problem and, more generally, the unreliability of Kohn-Sham orbital energies). This strategy has proven to be very powerful, yielding molecular orbital energies and solid-state band structures with comparable accuracy to many-body perturbation theory but at greatly reduced computational cost while preserving a functional formulation. This paper reviews the theory of Koopmans functionals, discusses the algorithms necessary for their implementation, and introduces koopmans, an open-source package that contains all of the code and workflows needed to perform Koopmans functional calculations and obtain reliable spectral properties of molecules and materials.

cond-mat.mtrl-sci↗

arXiv2023

Charge fluctuations in the intermediate-valence ground state of SmCoIn$_5$

The microscopic mechanism of heavy band formation, relevant for unconventional superconductivity in CeCoIn$_5$ and other Ce-based heavy fermion materials, depends strongly on the efficiency with which $f$ electrons are delocalized from the rare earth sites and participate in a Kondo lattice. Replacing Ce$^{3+}$ ($4f^1$, $J=5/2$) with Sm$^{3+}$ ($4f^5$, $J=5/2$), we show that a combination of crystal field and on-site Coulomb repulsion causes SmCoIn$_5$ to exhibit a $Γ_7$ ground state similar to CeCoIn$_5$ with multiple $f$ electrons. Remarkably, we also find that with this ground state, SmCoIn$_5$ exhibits a temperature-induced valence crossover consistent with a Kondo scenario, leading to increased delocalization of $f$ holes below a temperature scale set by the crystal field, $T_v$ $\approx$ 60 K. Our result provides evidence that in the case of many $f$ electrons, the crystal field remains the most important tuning knob in controlling the efficiency of delocalization near a heavy fermion quantum critical point, and additionally clarifies that charge fluctuations play a general role in the ground state of "115" materials.

cond-mat.str-el↗

arXiv2023

Ultrafast Frustration-Breaking and Magnetophononic Driving of Singlet Excitations in a Quantum Magnet

Ideal magnetic frustration forms the basis for the emergence of exotic quantum spin states that are entirely nonmagnetic. Such singlet spin states are the defining feature of the Shastry-Sutherland model, and of its faithful materials realization in the quantum antiferromagnet SrCu$_2$(BO$_3$)$_2$. To address these states on ultrafast timescales, despite their lack of any microscopic order parameter, we introduce a nonlinear magnetophononic mechanism to alter the quantum spin dynamics by driving multiple optical phonon modes coherently and simultaneously. We apply intense terahertz pulses to create a nonequilibrium modulation of the magnetic interactions that breaks the ideal frustration of SrCu$_2$(BO$_3$)$_2$, such that previously forbidden physics can be driven in a coherent manner. Specifically, this driving populates a purely magnetic excitation, the singlet branch of the two-triplon bound state, by resonance with the difference frequency of two pumped phonons. Our results demonstrate how light-driven phonons can be used for the ultrafast and selective manipulation of interactions in condensed matter, even at frequencies far from those of the pump spectrum, offering valuable additional capabilities for the dynamical control of quantum many-body phenomena.

cond-mat.str-el↗

arXiv2022

Koopmans spectral functionals in periodic-boundary conditions

Koopmans spectral functionals aim to describe simultaneously ground state properties and charged excitations of atoms, molecules, nanostructures and periodic crystals. This is achieved by augmenting standard density functionals with simple but physically motivated orbital-density-dependent corrections. These corrections act on a set of localized orbitals that, in periodic systems, resemble maximally localized Wannier functions. At variance with the original, direct supercell implementation [Phys. Rev. X 8, 021051 (2018)], we discuss here i) the complex but efficient formalism required for a periodic-boundary code using explicit Brillouin zone sampling, and ii) the calculation of the screened Koopmans corrections with density-functional perturbation theory. In addition to delivering improved scaling with system size, the present development makes the calculation of band structures with Koopmans functionals straightforward. The implementation in the open-source Quantum ESPRESSO distribution and the application to prototypical insulating and semiconducting systems are presented and discussed.

cond-mat.mtrl-sci↗

arXiv2022

Bloch's theorem in orbital-density-dependent functionals: Band structures from Koopmans spectral functionals

Koopmans-compliant functionals provide an orbital-density-dependent framework for an accurate evaluation of spectral properties; they are obtained by imposing a generalized piecewise-linearity condition on the total energy of the system with respect to the occupation of any orbital. In crystalline materials, due to the orbital-density-dependent nature of the functionals, minimization of the total energy to a ground state provides a set of minimizing variational orbitals that are localized and thus break the periodicity of the underlying lattice. Despite this, we show that Bloch symmetry can be preserved and it is possible to describe the electronic states with a band-structure picture, thanks to the Wannier-like character of the variational orbitals. We also present a method to unfold and interpolate the electronic bands from supercell ($Γ$-point) calculations, which enables us to calculate full band structures with Koopmans-compliant functionals. The results obtained for a set of benchmark semiconductors and insulators show very good agreement with state-of-the-art many-body perturbation theory and experiments, underscoring the reliability of these spectral functionals in predicting band structures.

cond-mat.mtrl-sci↗

arXiv2021

Atomic-level description of thermal fluctuations in inorganic lead halide perovskites

The potential of lead-halide perovskites for realistic applications is currently hindered by their limited long-term stability under functional activation. While the role of lattice flexibility in the thermal response of perovskites has become increasingly evident, the description of thermally-induced distortions is still unclear. In this work, we provide a unified picture of thermal activation in CsPbBr3 across length scales, showing that lattice symmetry does not increase at high temperatures. We combine temperature-dependent XRD, Br K-edge XANES, ab initio MD simulations, and calculations of the XANES spectra by first-principles, accounting for both thermal fluctuations and core hole final state effects. We find that the octahedral tilting of the Pb-Br inorganic framework statistically adopts multiple local configurations over time - in the short-range. In turn, the stochastic nature of the local thermal fluctuations uplifts the longer-range periodic octahedral tilting characterizing the low temperature structure, with the statistical mean of the local configurations resulting in a cubic-like time-averaged lattice. These observations can be rationalized in terms of displacive thermal phase transitions through the soft mode model, in which the phonon anharmonicity of the flexible inorganic framework causes the excess free energy surface to change as a function of temperature. Our work demonstrates that the effect of thermal dynamics on the XANES spectra can be effectively described for largely anharmonic systems, provided ab initio MD simulations are performed to determine the dynamically fluctuating structures, and core hole final state effects are included in order to retrieve an accurate XANES line shape. Moreover, it shows that the soft mode model, previously invoked to describe displacive thermal phase transitions in oxide perovskites, carries a more general validity.

cond-mat.mtrl-sci↗

arXiv2021

Design of the third-generation lead-based neutron spallation target for the neutron time-of-flight facility at CERN

The neutron time-of-flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: the Experimental Area 1 (EAR1), located 185 m horizontally from the target, and the Experimental Area 2 (EAR2), located 20 m above the target. The target, based on pure lead, is impacted by a high-intensity 20-GeV/c pulsed proton beam. The facility was conceived to study neutron-nucleus interactions for neutron kinetic energies between a few meV to several GeV, with applications of interest for nuclear astrophysics, nuclear technology, and medical research. After the second-generation target reached the end of its lifetime, the facility underwent a major upgrade during CERN's Long Shutdown 2 (LS2, 2019-2021), which included the installation of the new third-generation neutron target. The first and second-generation targets were based on water-cooled massive lead blocks and were designed focusing on EAR1, since EAR2 was built later. The new target is cooled by nitrogen gas to avoid erosion-corrosion and contamination of cooling water with radioactive lead spallation products. Moreover, the new design is optimized also for the vertical flight path and EAR2. This paper presents an overview of the target design focused on both physics and thermo-mechanical performance, and includes a description of the nitrogen cooling circuit and radiation protection studies.

physics.ins-det↗

arXiv2021

Electronic structure of water from Koopmans-compliant functionals

Obtaining a precise theoretical description of the spectral properties of liquid water poses challenges for both molecular dynamics (MD) and electronic structure methods. The lower computational cost of the Koopmans-compliant functionals with respect to Green's function methods allows the simulations of many MD trajectories, with a description close to the state-of-art quasi-particle self-consistent GW plus vertex corrections method (QSGW+f$_{xc}$). Thus, we explore water spectral properties when different MD approaches are used, ranging from classical MD to first-principles MD, and including nuclear quantum effects. We have observed that the different MD approaches lead to up to 1 eV change in the average band gap, thus, we focused on the band gap dependence with the geometrical properties of the system to explain such spread. We have evaluated the changes in the band gap due to variations in the intramolecular O-H bond distance, and HOH angle, as well as the intermolecular hydrogen bond O$\cdot\cdot\cdot$O distance, and the OHO angles. We have observed that the dominant contribution comes from the O-H bond length; the O$\cdot\cdot\cdot$O distance plays a secondary role, and the other geometrical properties do not significantly influence the gap. Furthermore, we analyze the electronic density of states (DOS), where the KIPZ functional shows a good agreement with the DOS obtained with state-of-art approaches employing quasi-particle self-consistent GW plus vertex corrections. The O-H bond length also significantly influences the DOS. When nuclear quantum effects are considered, a broadening of the peaks driven by the broader distribution of the O-H bond lengths is observed, leading to a closer agreement with the experimental photoemission spectra.

physics.comp-ph↗

arXiv2021

Quantifying Photoinduced Polaronic Distortions in Inorganic Lead Halide Perovskites Nanocrystals

The development of next generation perovskite-based optoelectronic devices relies critically on the understanding of the interaction between charge carriers and the polar lattice in out-of-equilibrium conditions. While it has become increasingly evident for CsPbBr3 perovskites that the Pb-Br framework flexibility plays a key role in their light-activated functionality, the corresponding local structural rearrangement has not yet been unambiguously identified. In this work, we demonstrate that the photoinduced lattice changes in the system are due to a specific polaronic distortion, associated with the activation of a longitudinal optical phonon mode at 18 meV by electron-phonon coupling, and we quantify the associated structural changes with atomic-level precision. Key to this achievement is the combination of time-resolved and temperature-dependent studies at Br K-edge and Pb L3-edge X-ray absorption with refined ab-initio simulations, which fully account for the screened core-hole final state effects on the X-ray absorption spectra. From the temporal kinetics, we show that carrier recombination reversibly unlocks the structural deformation at both Br and Pb sites. The comparison with the temperature-dependent XAS results rules out thermal effects as the primary source of distortion of the Pb-Br bonding motif during photoexcitation. Our work provides a comprehensive description of the CsPbBr3 perovskites photophysics, offering novel insights on the light-induced response of the system and its exceptional optoelectronic properties.

cond-mat.mtrl-sci↗

arXiv2019

Koopmans Meets Bethe-Salpeter: Excitonic Optical Spectra without GW

The Bethe-Salpeter Equation (BSE) can be applied to compute from first-principles optical spectra that include the effects of screened electron-hole interactions. As input, BSE calculations require single-particle states, quasiparticle energy levels and the screened Coulomb interaction, which are typically obtained with many-body perturbation theory, whose cost limits the scope of possible applications. This work tries to address this practical limitation, instead deriving spectral energies from Koopmans-compliant functionals and introducing a new methodology for handling the screened Coulomb interaction. The explicit calculation of the $W$ matrix is bypassed via a direct minimization scheme applied on top of a maximally localised Wannier function basis. We validate and benchmark this approach by computing the low-lying excited states of the molecules in Thiel's set, and the optical absorption spectrum of a $\text{C}_{60}$ fullerene. The results show the same trends as quantum chemical methods and are in excellent agreement with previous simulations carried out at the TD-DFT or $G_{0}W_{0}$-\text{BSE} level. Conveniently, the new framework reduces the parameter space controlling the accuracy of the calculation, thereby simplifying the simulation of charge-neutral excitations, offering the potential to expand the applicability of first-principles spectroscopies to larger systems of applied interest.

cond-mat.mtrl-sci↗