arXiv subjects

Nicola Malossi

Publications and source records attributed to Nicola Malossi.

13 recordsLinked to original sources

arXiv2025

Large amplitude mechanical coherent states and detection of weak nonlinearities in cavity optomechanics

The generation of large-amplitude coherent states of a massive mechanical resonator, and their quantum-limited detection represent useful tools for quantum sensing and for testing fundamental physics theories. In fact, any weak perturbation may affect the coherent quantum evolution of the prepared state, providing a sensitive probe for such a perturbation. Here we consider a cavity optomechanical setup and the case of the detection of a weak mechanical nonlinearity. We consider different strategies, first focusing on the stationary dynamics in the presence of multiple tones driving the system, and then focusing on non-equilibrium dynamical strategies. These methods can be successfully applied for measuring Duffing-like material nonlinearities, or effective nonlinear corrections associated with quantum gravity theories.

quant-ph↗

arXiv2025

Mechanical characterization of a membrane with an on-chip loss shield in a cryogenic environment

The quantum transduction of an rf/microwave signal to the optical domain, and vice versa, paves the way for technologies that exploit the advantages of each domain to perform quantum operations. Since electro-optomechanical devices implement a simultaneous coupling of a mechanical oscillator to both an rf/microwave field and an optical field, they are suitable for the realization of a quantum transducer. The membrane-in-the-middle setup is a possible solution, once its vibrational mode is cooled down to ultra cryogenic temperature for achieving quantum operation. This work is focused on the mechanical characterization via an optical interferometric probe, down to T=18mK, of a loss-shielded metalized membrane designed for this purpose. A stroboscopic technique has been exploited for revealing a mechanical quality factor up to 64 millions at the lowest temperature. In fact, with continuous illumination and a cryostat temperature below 1K, the heat due to optical absorption is not efficiently dissipated anymore, and the membrane remains hotter than its environment.

quant-ph↗

arXiv2025

Two-membrane etalon

Optomechanics with semi-transparent membrane multi-oscillators in a high-finesse cavity is an established solution for designing the dispersive interaction, and reaching many achievements, such as the study of non-linear dynamics, heat transfer, and so on. The multi-oscillators are dielectric slabs, usually with low reflectivity, constituting an etalon. Here we propose the theoretical and experimental investigation of a low-finesse optical cavity formed by two (nominally identical) parallel semi-transparent membranes. The experiment consists in laser-driving the cavity, detecting interferometrically the field reflected by the etalon, and measuring the intensity of the transmitted field, for different distances within the two membranes. A complete characterization of the membrane sandwich is provided. On the other hand, we developed an analytical model to describe the fields, which reproduces all the experimental results, under specific approximations. As expected, the model reproduces the known results when high-reflectivity, and/or fixed mirrors conditions are restored. This work paves the way for a complete and analytical model to describe multi-oscillators "membrane-in-the-middle" optomechanics.

quant-ph↗

arXiv2023

Low Noise Opto-Electro-Mechanical Modulator for RF-to-Optical Transduction in Quantum Communications

In this work, we present an Opto-Electro-Mechanical Modulator (OEMM) for RF-to-optical transduction realized via an ultra-coherent nanomembrane resonator capacitively coupled to an rf injection circuit made of a microfabricated read-out able to improve the electro-optomechanical interaction. This device configuration can be embedded in a Fabry-Perot cavity for electromagnetic cooling of the LC circuit in a dilution refrigerator exploiting the opto-electro-mechanical interaction. To this aim, an optically measured steady-state frequency shift of 380 Hz was seen with a polarization voltage of 30 V and a $Q$-factor of the assembled device above $10^6$ at room temperature. The rf-sputtered titanium nitride layer can be made superconductive to develop efficient quantum~transducers.

quant-ph↗

arXiv2021

Two-membrane cavity optomechanics: non-linear dynamics

We study the non-linear dynamics of a multimode optomechanical system constituted of a driven high-finesse Fabry-Pérot cavity containing two vibrating dielectric membranes. The analytical study allows to derive a full and consistent description of the displacement detection by a probe beam in the non-linear regime, enabling the faithful detection of membrane displacements well above the usual sensing limit corresponding to the cavity linewidth. In the weak driving regime where the system is in a pre-synchronized situation, the unexcited oscillator has a small, synchronized component at the frequency of the excited one; both large and small amplitude resonator motions are transduced in a nontrivial way by the non-linear response of the optical probe beam. We find perfect agreement between the experimental results, the numerical simulations, and an analytical approach based on slowly-varying amplitude equations.

quant-ph↗

arXiv2021

Silicon-nitride nanosensors toward room temperature quantum optomechanics

Observation of quantum phenomena in cryogenic, optically cooled mechanical resonators has been recently achieved by a few experiments based on cavity optomechanics. A well-established experimental platform is based on a thin film stoichiometric ($ Si_3 N_4 $) nanomembrane embedded in a Fabry-Perot cavity, where the coupling with the light field is provided by the radiation pressure of the light impinging on the membrane surface. Two crucial parameters have to be optimized to ensure that these systems work at the quantum level: the cooperativity $ C$ describing the optomechanical coupling and the product $ Q \times ν$ (quality factor - resonance frequency) related to the decoherence rate. A significant increase of the latter can be obtained with high aspect-ratio membrane resonators where uniform stress dilutes the mechanical dissipation. Furthermore, ultra-high $Q \times ν$ can be reached by drastically reducing the edge dissipation via clamp-tapering and/or by soft-clamping, virtually a clamp-free resonator configuration. In this work, we investigate, theoretically and experimentally, the edge loss mechanisms comparing two state-of-the-art resonators built by standard micro/nanofabrication techniques. The corresponding results would provide meaningful guidelines for designing new ultra-coherent resonating devices.

physics.optics↗

arXiv2021

Sympathetic cooling of a radio-frequency LC circuit to its ground state in an optoelectromechanical system

We present a complete theory for laser cooling of a macroscopic radio-frequency LC electrical circuit by means of an optoelectromechanical system, consisting of an optical cavity dispersively coupled to a nanomechanical oscillator, which is in turn capacitively coupled to the LC circuit of interest. We determine the optimal parameter regime where the LC resonator can be cooled down to its quantum ground state, which requires a large optomechanical cooperativity, and a larger electromechanical cooperativity. Moreover, comparable optomechanical and electromechanical coupling rates are preferable for reaching the quantum ground state.

quant-ph↗

arXiv2019

Noise robustness of synchronization of two nanomechanical resonators coupled to the same cavity field

We study synchronization of a room temperature optomechanical system formed by two resonators coupled via radiation pressure to the same driven optical cavity mode. By using stochastic Langevin equations and effective slowly-varying amplitude equations, we explore the long-time dynamics of the system. We see that thermal noise can induce significant non-Gaussian dynamical properties, including the coexistence of multi-stable synchronized limit cycles and phase diffusion. Synchronization in this optomechanical system is very robust with respect to thermal noise: in fact, even though each oscillator phase progressively diffuses over the whole limit cycle, their phase difference is locked, and such a phase correlation remains strong in the presence of thermal noise.

physics.optics↗

arXiv2018

Two-membrane cavity optomechanics

We study the optomechanical behaviour of a driven Fabry-Pérot cavity containing two vibrating dielectric membranes. We characterize the cavity-mode frequency shift as a function of the two-membrane positions, and report a $\sim 2.47$ gain in the optomechanical coupling strength of the membrane relative motion with respect to the single membrane case. This is achieved when the two membranes are properly positioned to form an inner cavity which is resonant with the driving field. We also show that this two-membrane system has the capability to tune the single-photon optomechanical coupling on demand, and represents a promising platform for implementing cavity optomechanics with distinct oscillators. Such a configuration has the potential to enable cavity optomechanics in the strong single-photon coupling regime, and to study synchronization in optically linked mechanical resonators.

quant-ph↗

arXiv2012

Cooperative excitation and many-body interactions in a cold Rydberg gas

The dipole blockade of Rydberg excitations is a hallmark of the strong interactions between atoms in these high-lying quantum states. One of the consequences of the dipole blockade is the suppression of fluctuations in the counting statistics of Rydberg excitations, of which some evidence has been found in previous experiments. Here we present experimental results on the dynamics and the counting statistics of Rydberg excitations of ultra-cold Rubidium atoms both on and off resonance, which exhibit sub- and super-Poissonian counting statistics, respectively. We compare our results with numerical simulations using a novel theoretical model based on Dicke states of Rydberg atoms including dipole-dipole interactions, finding good agreement between experiment and theory.

cond-mat.quant-gas↗

arXiv2011

High-fidelity quantum driving

The ability to accurately control a quantum system is a fundamental requirement in many areas of modern science such as quantum information processing and the coherent manipulation of molecular systems. It is usually necessary to realize these quantum manipulations in the shortest possible time in order to minimize decoherence, and with a large stability against fluctuations of the control parameters. While optimizing a protocol for speed leads to a natural lower bound in the form of the quantum speed limit rooted in the Heisenberg uncertainty principle, stability against parameter variations typically requires adiabatic following of the system. The ultimate goal in quantum control is to prepare a desired state with 100% fidelity. Here we experimentally implement optimal control schemes that achieve nearly perfect fidelity for a two-level quantum system realized with Bose-Einstein condensates in optical lattices. By suitably tailoring the time-dependence of the system's parameters, we transform an initial quantum state into a desired final state through a short-cut protocol reaching the maximum speed compatible with the laws of quantum mechanics. In the opposite limit we implement the recently proposed transitionless superadiabatic protocols, in which the system perfectly follows the instantaneous adiabatic ground state. We demonstrate that superadiabatic protocols are extremely robust against parameter variations, making them useful for practical applications.

quant-ph↗

arXiv2010

A cold atom pyramidal gravimeter with a single laser beam

We demonstrate a scheme for realizing a compact cold atom gravimeter. The use of a hollow pyramidal configuration allows to achieve all functions: trapping, interferometer and detection with a unique laser beam leading to a drastic reduction in complexity and volume. In particular, we demonstrate a relative sensitivity to acceleration of gravity (g) of 1.7 x 10-7 at one second, with a moderate laser power of 50 mW. This simple geometry combined to such a high sensitivity opens wide perspectives for practical applications (P. Bouyer and A. Landragin, patent number FR2009/000252, 2009).

physics.atom-ph↗

arXiv2009

Double diffraction in an atomic gravimeter

We demonstrate the realization of a new scheme for cold atom gravimetry based on the use of double diffraction beamsplitters recently demonstrated in \cite{Leveque}, where the use of two retro-reflected Raman beams allows symmetric diffraction in $\pm \hbar k_{eff}$ momenta. Though in principle restricted to the case of zero Doppler shift, for which the two pairs of Raman beams are simultaneously resonant, we demonstrate that such diffraction pulses can remain efficient on atoms with non zero velocity, such as in a gravimeter, when modulating the frequency of one of the two Raman laser sources. We use such pulses to realize an interferometer insensitive to laser phase noise and some of the dominant systematics. This reduces the technical requirements and would allow the realization of a simple atomic gravimeter. We demonstrate a sensitivity of $1.2\times10^{-7}g$ per shot.

physics.atom-ph↗