Searcharxiv⌕ Search

arXiv subjects

Nicolas A. F. Jaeger

Publications and source records attributed to Nicolas A. F. Jaeger.

7 recordsLinked to original sources
arXiv2026

DC-to-GHz Modulation In Microring Modulators Using Ferroelectric Nematic Liquid Crystal-on-Silicon in a Foundry Photonic Process

Silicon-organic hybrid (SOH) platforms exhibit exceptional electro-optic (EO) properties, including high-speed operation, low energy consumption, and compact footprints. However, the absence of a scalable poling method for EO polymers, combined with the slow switching speeds characteristic of liquid crystals, has impeded the integration and compatibility of these materials with commercial silicon photonic foundries. On the other hand, the realization of very-large-scale photonic integrated circuits (PICs) in the native silicon photonics platform itself is impeded by the complexities associated with the wavelength and thermal stabilization for microring modulators (MRMs). This study establishes the foundation for a poling-free, CMOS-compatible SOH MRM platform by exploiting simultaneous AC phase shifts in ferroelectric nematic liquid crystals (FN-LCs). We present the first demonstration of an MRM coated with FN-LC, with both the RF signal and the DC bias applied to the same electrodes, taking advantage of the dual phase shift uniquely available in FN-LC. An EO bandwidth of f$_{-6dB}\approx$ 7.8 GHz is achieved \textendash~ the highest reported value for an SOH MRM to date. As a proof of concept, we demonstrate an approximately linear resonance shift across the full width at half maximum ($\approx$ 150 pm/V), with a static power efficiency of $\approx$ 4.5 nW/$π$ for an MRM occupying a total footprint of $\approx$ 0.084 mm$^2$ and exhibiting an on-chip optical insertion loss of $\approx$ 0.78 dB. Successful infiltration of FN-LC, selectively patterned on top of phase shifters, along with optical input/output channels established using free-form photonic wire bonds, is demonstrated in the proposed PIC.

physics.optics↗
arXiv2025

GHz-rate optical phase shift in light matter interaction-engineered, silicon-ferroelectric nematic liquid crystals

Organic electro-optic materials have demonstrated promising performance in developing electro-optic phase shifters. Their integration with other silicon photonic processes, nanofabrication complexities, and durability remains to be developed. While the required poling step in electro-optic polymers limits their potential and utilization on a large scale, devices made of paraelectric nematic liquid crystals suffer from slow bandwidth. In ferroelectric nematic liquid crystals, we report an additional GHz-fast phase shift that ultimately allows for significant second-order nonlinear optical coefficients related to the Pockels effect. It avoids poling issues and can pave the way for hybrid silicon-organic systems with CMOS-foundry compatibility. We report DC and AC modulation efficiencies of $\approx$~0.25 V$\cdot$mm (from liquid crystal orientation) and $\approx$~25.7 V$\cdot$mm (from Pockels effect), respectively, an on-chip insertion loss of $\approx$~2.6 dB, and an electro-optic bandwidth of $f_\text{-6dB}$>4.18 GHz, employing improved light-matter interaction in a waveguide architecture that calls for only one lithography step.

physics.optics↗
arXiv2024

Fabrication-Aware Inverse Design For Shape Optimization

Inverse design (ID) is a computational method that systematically explores a design space to find optimal device geometries based on specific performance criteria. In silicon photonics, ID often leads to devices with design features that degrade significantly due to the fabrication process, limiting the applicability of these devices in scalable silicon photonic fabrication. We demonstrate a solution to this performance degradation through fabrication-aware inverse design (FAID), integrating lithography models for deep-ultraviolet (DUV) lithography and electron beam lithography (EBL) into the shape optimization approach of ID. A Y-branch and an SWG-to-strip converter were generated and fabricated with this new approach. Simulated and measured results verify that the FAID yields devices with up to 0.6 dB lower insertion loss per device. The modified workflow enables designers to use ID to generate devices that adjust for process bias predicted by lithography models.

eess.SY↗
arXiv2024

120 GOPS Photonic Tensor Core in Thin-film Lithium Niobate for Inference and in-situ Training

Photonics offers a transformative approach to artificial intelligence (AI) and neuromorphic computing by enabling low-latency, high-speed, and energy-efficient computations. However, conventional photonic tensor cores face significant challenges in constructing large-scale photonic neuromorphic networks. Here, we propose a fully integrated photonic tensor core, consisting of only two thin-film lithium niobate (TFLN) modulators, a III-V laser, and a charge-integration photoreceiver. Despite its simple architecture, it is capable of implementing an entire layer of a neural network with a computational speed of 120 GOPS, while also allowing flexible adjustment of the number of inputs (fan-in) and outputs (fan-out). Our tensor core supports rapid in-situ training with a weight update speed of 60 GHz. Furthermore, it successfully classifies (supervised learning) and clusters (unsupervised learning) 112 * 112-pixel images through in-situ training. To enable in-situ training for clustering AI tasks, we offer a solution for performing multiplications between two negative numbers.

physics.optics↗
arXiv2022

Enhanced Polling and Infiltration for Highly-Efficient Electro-Optic Polymer-Based Mach-Zehnder Modulators

An ultra-narrow slot waveguide is fabricated for use in highly-efficient, electro-optic-polymer-based, integrated-optic modulators. Measurement results indicate that $V_πL$'s below 1.2 V.mm are possible for balanced Mach-Zehnder modulators using this ultra-narrow slot waveguide on a silicon-organic hybrid platform. Simulated $V_πL$'s of 0.35 V.mm have also been obtained. In addition to adapting standard recipes, we developed two novel fabrication processes for achieving miniaturized devices with high modulation sensitivity. To boost compactness and decrease the overall footprint, we use a fabrication approach based on air bridge interconnects on thick, thermally-reflowed, MaN 2410 E-beam resist protected by an alumina layer. To overcome the challenges of high currents and imperfect infiltration of polymers into ultra-narrow slots, we use a carefully designed, atomically-thin layer of TiO$_2$ as a carrier-barrier to enhance the polling efficiency of our electro-optic polymers. Additionally, finite-difference time-domain simulations are employed to optimize the effect of the thin layer of TiO$_2$. As compared to other, non-optimized, cases, our peak measured current is reduced by a factor of 3; scanning electron microscopy images also demonstrate that we achieve almost perfect infiltration. The anticipated increase in total capacitance due to the TiO$_2$ layer is shown to be negligible. In fact, applying our TiO$_2$ surface treatment to our ultra-narrow slot, allows us to obtain an improved phase shift efficiency ($\partial n / \partial V$) of $\sim$94% for a 10 nm TiO$_2$ layer.

physics.app-ph↗
arXiv2015

Wavelength tuning and stabilization of microring-based filters using silicon in-resonator photoconductive heaters

We demonstrate that n-doped resistive heaters in silicon waveguides show photoconductive effects with high responsivities. These photoconductive heaters, integrated into microring resonator (MRR)-based filters, were used to automatically tune and stabilize the filter's resonance wavelength to the input laser's wavelength. This is achieved without requiring dedicated defect implantations, additional material depositions, dedicated photodetectors, or optical power tap-outs. Automatic wavelength stabilization of first-order MRR and second-order series-coupled MRR filters is experimentally demonstrated. Open eye diagrams were obtained for data transmission at 12.5 Gb/s while the temperature was varied by 5 C at a rate of 0.28 C/s. We theoretically show that series-coupled MRR-based filters of any order can be automatically tuned by using photoconductive heaters to monitor the light intensity in each MRR, and sequentially aligning the resonance of each MRR to the laser's wavelength.

physics.optics↗