arXiv subjects

Nicolas Levraud

Publications and source records attributed to Nicolas Levraud.

8 recordsLinked to original sources

arXiv2026

The MICADO first light imager for the ELT: the SCAO module AIT in France, from the beta flat configuration towards the flat and final configurations

MICADO is the designated ELT first light instrument, a near-infrared imager working at the diffraction limit of the telescope thanks to a SCAO and an MCAO mode. Since summer 2024, MICADO is in its AIT phase and all MICADO partners are currently integrating their subsystems. The MICADO SCAO module will follow three successive AIT phases in France: the beta flat configuration, the flat configuration and the final configuration. In this contribution I will first present the progress made in the AIT of the beta flat configuration and its closed loop results. I will then present the performed and on-going tasks for the flat and final configurations (manufacturing, delivery and integration of several SCAO subsystems and pieces of software) and the results obtained so far in the flat configuration. I will then conclude with the expected following steps of the SCAO module AIT in Garching.

astro-ph.IM↗

arXiv2024

Strategy for sensing petal mode in presence of AO residual turbulence with pyramid wavefront sensor

With the Extremely Large Telescope-generation telescopes come new challenges. The complexity of these telescopes' pupil creates new problems for Adaptive Optics. In particular, the large spiders necessary to support the massive optics of these telescopes create discontinuities in the wavefront measurement. These discontinuities appear as a new phase error dubbed the `petal mode'. This error is described as a differential piston between the fragment of the pupil separated by the spiders and is responsible for reducing the European Extremely Large Telescope's (ELT) resolution to a 15m telescope resolution. The aim of this paper is to study the measurement of the petal mode by adaptive optics sensors. We want to understand why the Pyramid Wavefront Sensor (PyWFS) cannot measure this petal mode under normal conditions and how to allow this measurement by adapting the Adaptive optics control scheme and the PyWFS. To facilitate our study, we consider a simplified version of the petal mode, featuring a simpler pupil than the ELT. We studied specifically how a system that separates the atmospheric turbulence from the petal measurement would behave. The unmodulated PyWFS (uPyWFS) but the uPyWFS does not make accurate measurements in the presence of atmospheric residuals. Studying the petal mode's power spectral density, we propose a filtering step, consisting of a pinhole around the pyramid tip. This reduces the first path residuals seen by the uPyWFS and restores its accuracy. Finally, we demonstrate our proposed system with end-to-end simulations.To address the petal problem, a two-path adaptive optics with a sensor dedicated to the measurement of the petal mode seems necessary. Through this paper, we demonstrate that an uPyWFS can confuse the petal mode with the residuals from the first path. However, adding a spatial filter on top of said uPyWFS makes it a good petalometer candidate.

astro-ph.IM↗

arXiv2022

Modeling noise propagation in Fourier-filtering wavefront sensing, fundamental limits and quantitative comparison

Adaptive optics (AO) is a technique allowing to drastically improve ground-based telescopes angular resolution. The wavefront sensor (WFS) is one of the key components of such systems, driving the fundamental performance limitations. In this paper, we focus on a specific class of WFS: the Fourier-filtering wavefront sensors (FFWFS). This class is known for its extremely high sensitivity. However, a clear and comprehensive noise propagation model for any kind of FFWFS is lacking. Considering read-out noise and photon noise, we derive a simple and comprehensive model allowing to understand how these noises propagates in the phase reconstruction in the linear framework. This new noise propagation model works for any kind of FFWFS, and allows to revisit the fundamental sensitivity limit of these sensors. Furthermore, a new comparison between widely used FFWFS is held. We focus on the two main used FFWFS classes: the Zernike WFS (ZWFS) and the pyramid WFS (PWFS), bringing new understanding of their behavior.

astro-ph.IM↗

arXiv2022

Optimizing Fourier-Filtering WFS to reach sensitivity close to the fundamental limit

To reach the full potential of the new generation of ground based telescopes, an extremely fine adjustment of the phase is required. Wavefront control and correction before detection has therefore become one of the cornerstones of instruments to achieve targeted performance, especially for high-contrast imaging. A crucial feature of accurate wavefront control leans on the wavefront sensor (WFS). We present a strategy to design new Fourier-Filtering WFS that encode the phase close from the fundamental photon efficiency limit. This strategy seems promising as it generates highly sensitive sensors suited for different pupil shape configurations.

astro-ph.IM↗

arXiv2022

Adapting the pyramid wavefront sensor for pupil fragmentation of the ELT class telescopes

The next generation of Extremely Large Telescope (24 to 39m diameter) will suffer from the so-called "pupil fragmentation" problem. Due to their pupil shape complexity (segmentation, large spiders ...), some differential pistons may appear between some isolated part of the full pupil during the observations. Although classical AO system will be able to correct for turbulence effects, they will be blind to this specific telescope induced perturbations. Hence, such differential piston, a.k.a petal modes, will prevent to reach the diffraction limit of the telescope and ultimately will represent the main limitation of AO-assisted observation with an ELT. In this work we analyse the spatial structure of these petal modes and how it affects the ability of a Pyramid Wavefront sensor to sense them. Then we propose a variation around the classical Pyramid concept for increasing the WFS sensitivity to this particular modes. Nevertheless, We show that one single WFS can not accurately and simultaneously measure turbulence and petal modes. We propose a double path wavefront sensor scheme to solve this problem. We show that such a scheme,associated to a spatial filtering of residual turbulence in the second WFS path dedicated to petal mode sensing, allows to fully measure and correct for both turbulence and fragmentation effects and will eventually restore the full capability and spatial resolution of the future ELT.

astro-ph.IM↗

arXiv2021

Variation on a Zernike wavefront sensor theme: optimal use of photons

The Zernike wavefront sensor (ZWFS) is a concept belonging to the wide class Fourier-filtering wavefront sensor (FFWFS). The ZWFS is known for its extremely high sensitivity while having a low dynamic range, which makes it a unique sensor for second stage adaptive optics (AO) systems or quasi-static aberrations calibration sensor. This sensor is composed of a focal plane mask made of a phase shifting dot fully described by two parameters: its diameter and depth. In this letter, we aim to improve the performance of this sensor by changing the diameter of its phase shifting dot. We begin with a general theoretical framework providing an analytical description of the FFWFS properties, then we predict the expected ZWFS sensitivity for different configurations of dot diameters and depths. The analytical predictions are then validated with end-to-end simulations. From this, we propose a variation of the classical ZWFS shape which exhibits extremely appealing properties. We show that the ZWFS sensitivity can be optimized by modifying the dot diameter and even reach the optimal theoretical limit, with a trade-off for low spatial frequencies sensitivity. As an example, we show that a ZWFS with a 2{\lambda}/D dot diameter (where {\lambda} is the sensing wavelength and D the telescope diameter), hereafter called Z2WFS, exhibits a sensitivity twice higher than the classical 1.06{\lambda}/D ZWFS for all the phase spatial components except for tip-tilt modes. Furthermore, this gain in sensitivity does not impact the dynamic range of the sensor, and the Z2WFS exhibits a similar dynamical range as the classical 1.06{\lambda}/D ZWFS. This study opens the path to the conception of diameter-optimized ZWFS.

astro-ph.IM↗

arXiv2019

Demonstration of an electric field conjugation algorithm for improved starlight rejection through a single mode optical fiber

Linking a coronagraph instrument to a spectrograph via a single mode optical fiber is a pathway towards detailed characterization of exoplanet atmospheres with current and future ground- and space-based telescopes. However, given the extreme brightness ratio and small angular separation between planets and their host stars, the planet signal-to-noise ratio will likely be limited by the unwanted coupling of starlight into the fiber. To address this issue, we utilize a wavefront control loop and a deformable mirror to systematically reject starlight from the fiber by measuring what is transmitted through the fiber. The wavefront control algorithm is based on the formalism of electric field conjugation (EFC), which in our case accounts for the spatial mode selectivity of the fiber. This is achieved by using a control output that is the overlap integral of the electric field with the fundamental mode of a single mode fiber. This quantity can be estimated by pair-wise image plane probes injected using a deformable mirror. We present simulation and laboratory results that demonstrate our approach offers a significant improvement in starlight suppression through the fiber relative to a conventional EFC controller. With our experimental setup, which provides an initial normalized intensity of $3\times10^{-4}$ in the fiber at an angular separation of $4\lambda/D$, we obtain a final normalized intensity of $3\times 10^{-6}$ in monochromatic light at $\lambda=635$~nm through the fiber (100x suppression factor) and $2\times 10^{-5}$ in $\Delta\lambda/\lambda=8%$ broadband light about $\lambda=625$~nm (10x suppression factor). The fiber-based approach improves the sensitivity of spectral measurements at high contrast and may serve as an integral part of future space-based exoplanet imaging missions as well as ground-based instruments.

astro-ph.IM↗

arXiv2018

Vortex fiber nulling for exoplanet observations. I. Experimental demonstration in monochromatic light

Vortex fiber nulling is a method for spectroscopically characterizing exoplanets at small angular separations, $\lesssim\lambda/D$, from their host star. The starlight is suppressed by creating an optical vortex in the system point spread function, which prevents the stellar field from coupling into the fundamental mode of a single-mode optical fiber. Light from the planet, on the other hand, couples into the fiber and is routed to a spectrograph. Using a prototype vortex fiber nuller (VFN) designed for monochromatic light, we demonstrate coupling fractions of $6\times10^{-5}$ and $>0.1$ for the star and planet, respectively.

astro-ph.IM↗