SearcharxivSearch

arXiv subjects

Nicolas Lorente

Publications and source records attributed to Nicolas Lorente.

At least 19 recordsLinked to original sources

Lindblad Multiproduct Formulas

We introduce Lindblad Multiproduct Formulas: a quantum error mitigation technique that uses two-dimensional tensor networks contracted with loop-corrected belief propagation. The quantities required to implement the error mitigation scheme that are evaluated with tensor networks can be less computationally expensive to calculate than the expectation values themselves, thus allowing for the possibility of applying our method to certain systems for which tensor network methods may struggle to calculate the observable quantities of interest. The workflow incorporates Clifford rescaling techniques and outputs an estimated error bar. We apply our method to a model of two-dimensional discrete time crystals studied previously and implement it on $65$ qubits arranged in a $3\!\times\!3$ heavy-hexagonal topology on the quantum computer ibm_basquecountry. We show that a GPU implementation of the classical part of our workflow achieves a speedup of up to $5.6\times$.

quant-ph

Spin-State Engineering of Single Titanium Adsorbates on Ultrathin Magnesium Oxide

Single atomic adsorbates on ultrathin insulating films provide a promising route toward bottom-up quantum architectures based on atomically identical yet individually addressable spin qubits on solid surfaces. A key challenge in engineering quantum-coherent spin nanostructures lies in understanding and controlling the spin state of individual adsorbates. In this work, we investigate single titanium (Ti) atoms adsorbed on MgO/Ag(100) surfaces using a combined scanning tunneling microscopy and electron spin resonance. Our measurements reveal two distinct spin states, $S = 1/2$ and $S = 1$, depending on the local adsorption site and the thickness of the MgO film. Density functional theory calculations suggest a Ti$^+$ configuration for the Ti adsorbates with approximately 3 electrons in the 4$s$ and 3$d$ valence shells. Using a multi-orbital atomic multiplet calculations the site dependence of the spin can be rationalized as a charge redistribution between spin-polarizing and depolarizing orbitals. These findings underscore the potential of surface-supported single atoms as spin qubits with tunable spin and charge states, enabling atom-by-atom control in the realization of a versatile quantum platform on surfaces.

cond-mat.mes-hall

Contrasting exchange-field and spin-transfer torque driving mechanisms in all-electric electron spin resonance

Understanding the coherent properties of electron spins driven by electric fields is crucial for their potential application in quantum-coherent nanoscience. In this work, we address two distinct driving mechanisms in electric-field driven electron-spin resonance as implemented in scanning tunneling spectroscopy. We study the origin of the driving field using a single orbital Anderson impurity, connected to polarized leads and biased by a voltage modulated on resonance with a spin transition. By mapping the quantum master equation into a system of equations for the impurity spin, we identify two distinct driving mechanisms. Below the charging thresholds of the impurity, electron spin resonance is dominated by a magnetically exchange-driven mechanism or field-like torque. Conversely, above the charging threshold spin-transfer torque caused by the spin-polarized current through the impurity drives the spin transition. Only the first mechanism enables coherent quantum spin control, while the second one leads to fast decoherence and spin accumulation towards a non-equilibrium steady-state. The electron spin resonance signals and spin dynamics vary significantly depending on which driving mechanism dominates, highlighting the potential for optimizing quantum-coherent control in electrically driven quantum systems.

cond-mat.mes-hall

An electrically controlled single molecule spin switch

Precise control of spin states and spin-spin interactions in atomic-scale magnetic structures is crucial for spin-based quantum technologies. A promising architecture is molecular spin systems, which offer chemical tunability and scalability for larger structures. An essential component, in addition to the qubits themselves, is switchable qubit-qubit interactions that can be individually addressed. In this study, we present an electrically controlled single-molecule spin switch based on a bistable complex adsorbed on an insulating magnesium oxide film. The complex, which consists of an Fe adatom coupled to an iron phthalocyanine (FePc) molecule, can be reversibly switched between two stable states using voltage pulses locally via the tip of a scanning tunnelling microscope (STM). Inelastic electron tunnelling spectroscopy (IETS) measurements and density functional theory (DFT) calculations reveal a distinct change between a paramagnetic and a non-magnetic spin configuration. Lastly, we demonstrate the functionality of this molecular spin switch by using it to modify the electron spin resonance (ESR) frequency of a nearby target FePc spin within a spin-spin coupled structure. Thus, we showcase how individual molecular machines can be utilized to create scalable and tunable quantum devices.

cond-mat.mes-hall

Thermal with Electronic Excitation for the Unidirectional Rotation of a Molecule on Surface

Exploring the limits of the microscopic reversibility principle, we investigated the interplay between thermal and electron tunneling excitations for the unidirectional rotation of a molecule-rotor on the Au(111) surface. We identified a range of moderate voltages and temperatures where heating the surface enhances the unidirectional rotational rate of a chemisorbed DMNI-P rotor. At higher voltage, inelastic tunneling effects dominate while at higher temperature the process becomes stochastic. At each electron transfer event during tunneling, the quantum mixing of ground and excited electronic states brings part of the surface thermal energy in the excited electronic states of the molecule-rotor. Thermal energy contributes therefore to the semi-classical unidirectional rotation without contradicting the microscopic reversibility principle.

cond-mat.mes-hall

Understanding the Interlayer Coupling in 1T/1H-NbSe$_2$ Hetero-Bilayers

The properties of 2D materials are strongly influenced by their substrate, leading to a variety of "proximity effects" like screening, charge transfer, and hybridization. Surprisingly, there is a dearth of theoretical studies on these effects. Particularly, previous theoretical research on the Star of David (SOD) structure in 1T-NbSe$_2$ has focused on single-layer configurations or stacking with the same 1T phase without any real substrate. Here, we depart from these approaches and explore how these proximity effects shape the electronic and magnetic properties of the 1T-NbSe$_2$ phase when it is grown on the metallic 1H-NbSe$_2$ substrate. Using Density Functional Calculations, we establish a common framework to define the key characteristics of both free-standning 1T-NbSe$_2$ and 1H-NbSe$_2$. We then identify the optimal stacking arrangement for these two layers, revealing a transfer from the 1T to the 1H phase and a reorganization of charge within each layer. Our findings indicate that the magnetic moment of the SOD structure is still robust; however, is diminished due to a reduction in the on-site Coulomb interaction of the Hubbard bands. Additionally, the interlayer coupling induces metallicity in the 1T phase and increases the decoupling of the lower Hubbard band from the valence band.

cond-mat.str-el

In-gap states induced by magnetic impurities on wide-band s-wave superconductors: self-consistent calculations

The role of self-consistency in Bogoliubov-de Gennes equations is frequently underestimated in the investigation of in-gap states created by magnetic impurities in s-wave superconductors. Our research focuses on the impact of self-consistency on the in-gap states produced by magnetic stuctures on superconductors, specifically evaluating the density of states, the in-gap bands, and their topological attributes. Here, we show results ranging from single impurity to finite chains, and infinite ferromagnetic spin chains in wide-band s-wave superconductors. These results show that the order parameter contains important information regarding quantum phase transitions and their topological nature, underscoring the importance of self-consistency in such studies.

cond-mat.supr-con

Quantum-centric Supercomputing for Materials Science: A Perspective on Challenges and Future Directions

Computational models are an essential tool for the design, characterization, and discovery of novel materials. Hard computational tasks in materials science stretch the limits of existing high-performance supercomputing centers, consuming much of their simulation, analysis, and data resources. Quantum computing, on the other hand, is an emerging technology with the potential to accelerate many of the computational tasks needed for materials science. In order to do that, the quantum technology must interact with conventional high-performance computing in several ways: approximate results validation, identification of hard problems, and synergies in quantum-centric supercomputing. In this paper, we provide a perspective on how quantum-centric supercomputing can help address critical computational problems in materials science, the challenges to face in order to solve representative use cases, and new suggested directions.

quant-ph

Bipolar single-molecule electroluminescence and electrofluorochromism

Understanding the fundamental mechanisms of optoelectronic excitation and relaxation pathways on the single-molecule level has only recently been started by combining scanning tunneling microscopy (STM) and spectroscopy (STS) with STM-induced luminescence (STML). In this paper, we investigate cationic and anionic fluorescence of individual zinc phthalocyanine (ZnPc) molecules adsorbed on ultrathin NaCl films on Ag(111) by using STML. They depend on the tip-sample bias polarity and appear at threshold voltages that are correlated with the onset energies of particular molecular orbitals, as identified by STS. We also find that the fluorescence is caused by a single electron tunneling process. Comparing with results from density functional theory calculations, we propose an alternative many-body picture to describe the charging and electroluminescence mechanism. Our study provides aspects toward well-defined voltage selectivity of bipolar electrofluorochromism, as well as fundamental insights regarding the role of transiently charged states of emitter molecules within OLED devices.

cond-mat.mes-hall

Electron paramagnetic resonance of alkali metal atoms and dimers on ultrathin MgO

Electron paramagnetic resonance (EPR) can provide unique insight into the chemical structure and magnetic properties of dopants in oxide and semiconducting materials that are of interest for applications in electronics, catalysis, and quantum sensing. Here, we demonstrate that EPR in combination with scanning tunneling microscopy (STM) allows for probing the bonding and charge state of alkali metal atoms on an ultrathin magnesium oxide layer on a Ag substrate. We observe a magnetic moment of $1μ_\mathrm{B}$ for Li$_2$, LiNa, and Na$_2$ dimers corresponding to spin radicals with a charge state of $+1e$. Single alkali atoms have the same charge state and no magnetic moment. The ionization of the adsorbates is attributed to charge transfer through the oxide to the metal substrate. Our work highlights the potential of EPR-STM to provide insight into dopant atoms that are relevant for the control of the electrical properties of surfaces and nanodevices.

cond-mat.mtrl-sci

Colloquium: Atomic spin chains on surfaces

In the present Colloquium, we focus on the properties of 1-D magnetic systems on solid surfaces. From the emulation of 1-D quantum phases to the potential realization of Majorana edge states, spin chains are unique systems to study. The advent of scanning tunnelling microscope (STM) based techniques has permitted us to engineer spin chains in an atom-by-atom fashion via atom manipulation and to access their spin states on the ultimate atomic scale. Here, we present the current state of research on spin correlations and dynamics of atomic spin chains as studied by the STM. After a brief review of the main properties of spin chains on solid surfaces, we classify spin chains according to the coupling of their magnetic moments with the holding substrate. This classification scheme takes into account that the nature and lifetimes of the spin-chain excitation intrinsically depend on the holding substrate. We first show the interest of using insulating layers on metals, which generally results in an increase in the spin state's lifetimes such that their quantized nature gets evident and they are individually accessible. Next, we show that the use of semiconductor substrates promises additional control through the tunable electron density via doping. When the coupling to the substrate is increased for spin chains on metals, the substrate conduction electron mediated interactions can lead to emergent exotic phases of the coupled spin chain-substrate conduction electron system. A particularly interesting example is furnished by superconductors. Magnetic impurities induce states in the superconducting gap. Due to the extended nature of the spin chain, the in-gap states develop into bands that can lead to the emergence of 1-D topological superconductivity and, consequently to the appearance of Majorana edge states.

cond-mat.mes-hall

A model for individual quantal nano-skyrmions

A quantal model description of a discrete localized skyrmion singularity embedded in a ferromagnetic environment is proposed. It allows discussing the importance of various parameters in the appearance of a quantal skyrmion singularity. Analysis of the skyrmion reveals a few specific quantal properties: presence of a whole series of skyrmion states, non-classical nature of the local spins, presence of superposition states and presence of extra-skyrmion states due to the quantization of the central spin of the singularity. The interaction of an electron, tunneling or substrate, with the skyrmion is also described allowing a new view at the origin of the skyrmion stability as well as the possibility to discriminate between ferromagnetic and skyrmion phase in an Inelastic Electron Tunneling Spectroscopy (IETS) experiment, based on the skyrmion quantal properties.

cond-mat.mes-hall

From tunneling to contact in a magnetic atom: the non-equilibrium Kondo effect

A low-temperature scanning tunneling microscope was employed to study the differential conductance in an atomic junction formed by an adsorbed Co atom on a Cu(100) surface and a copper-covered tip. A zero-bias anomaly (ZBA) reveals spin scattering off the Co atom, which is assigned to a Kondo effect. The ZBA exhibits a characteristic asymmetric lineshape when electrons tunnel between tip and sample, while upon the tip-Co contact it symmetrizes and broadens. Through density functional theory calculations and the non-equilibrium non-crossing approximation we show that the lineshape broadening is mainly a consequence of the additional coupling to the tip, while non-equilibrium effects only modify the large-bias tails of the ZBA.

cond-mat.mes-hall

Structural and magnetic properties of FeMn$_x$ ($x=$1...6) chains supported on Cu$_2$N / Cu (100)

Heterogeneous atomic magnetic chains are built by atom manipulation on a Cu$_2$N/Cu (100) substrate. Their magnetic properties are studied and rationalized by a combined scanning tunneling microscopy (STM) and density functional theory (DFT) work completed by model Hamiltonian studies. The chains are built using Fe and Mn atoms ontop of the Cu atoms along the N rows of the Cu$_2$N surface. Here, we present results for FeMn$_x$ ($x$=1...6) chains emphasizing the evolution of the geometrical, electronic, and magnetic properties with chain size. By fitting our results to a Heisenberg Hamiltonian we have studied the exchange-coupling matrix elements $J$ for different chains. For the shorter chains, $x \leq 2$, we have included spin-orbit effects in the DFT calculations, extracting the magnetic anisotropy energy. Our results are also fitted to a simple anisotropic spin Hamiltonian and we have extracted values for the longitudinal-anisotropy $D$ and transversal-anisotropy $E$ constants. These parameters together with the values for $J$ allow us to compute the magnetic excitation energies of the system and to compare them with the experimental data.

cond-mat.mes-hall

Correlation-mediated processes for electron-induced switching between Neel states of Fe anti-ferromagnetic chains

The controlled switching between two quasi-stable Neel states in adsorbed anti-ferromagnetic Fe chains has recently been achieved by Loth et al [Science 335, 196 (2012)]. In order to rationalize their data, we evaluate the rate of tunneling electron-induced switching between the Néel states. Good agreement is found with the experiment permitting us to identify three switching mechanisms: (i) low-bias direct electron-induced transitions, (ii) intermediate-bias switching via spin-wave-like excitation, and (iii) high-bias transitions mediated by domain wall formation. Spin correlations in the anti-ferromagnetic chains are the switching driving force leading to a marked chain-size dependence.

cond-mat.mes-hall

Excitation of local magnetic moments by tunnelling electrons

The advent of milli-kelvin scanning tunneling microscopes (STM) with inbuilt magnetic fields has opened access to the study of magnetic phenomena with atomic resolution at surfaces. In the case of single atoms adsorbed on a surface, the existence of different magnetic energy levels localized on the adsorbate is due to the breaking of the rotational invariance of the adsorbate spin by the interaction with its environment, leading to energy terms in the meV range. These structures were revealed by STM experiments in IBM Almaden in the early 2000's for atomic adsorbates on CuN surfaces. The experiments consisted in the study of the changes in conductance caused by inelastic tunnelling of electrons (IETS, Inelastic Electron Tunnelling Spectroscopy). Manganese and Iron adatoms were shown to have different magnetic anisotropies induced by the substrate. More experiments by other groups followed up, showing that magnetic excitations could be detected in a variety of systems: e.g. complex organic molecules showed that their magnetic anistropy was dependent on the molecular environment, piles of magnetic molecules showed that they interact via intermolecular exchange interaction, spin waves were excited on ferromagnetic surfaces and in Mn chains, and magnetic impurities have been analyzed on semiconductors. These experiments brought up some intriguing questions: the efficiency of magnetic excitations was very high, the excitations could or could not involve spin flip of the exciting electron and singular-like behavior was sometimes found at the excitation thresholds. These facts called for extended theoretical analysis; perturbation theories, sudden-approximation approaches and a strong coupling scheme successfully explained most of the magnetic inelastic processes. In addition, many-body approaches were also used to decipher the interplay between inelas

cond-mat.mes-hall

Negative differential resistance in scanning tunneling microscopy: simulations on C$_{60}$-based molecular overlayers

We determine the conditions in which negative differential resistance (NDR) appears in the C$_{60}$-based molecular device of [Phys. Rev. Lett. {\bf 100}, 036807 (2008)] by means of ab-initio electron-transport simulations. Our calculations grant access to bias-dependent intrinsic properties of the molecular device, such as electronic levels and their partial widths. We show that these quantities depend on the molecule-molecule and molecule-electrode interactions of the device. Hence, NDR can be tuned by modifying the bias behavior of levels and widths using both types of interactions.

cond-mat.mes-hall

Unified description of inelastic propensity rules for electron transport through nanoscale junctions

We present a method to analyze the results of first-principles based calculations of electronic currents including inelastic electron-phonon effects. This method allows us to determine the electronic and vibrational symmeties in play, and hence to obtain the so-called propensity rules for the studied systems. We show that only a few scattering states -- namely those belonging to the most transmitting eigenchannels -- need to be considered for a complete description of the electron transport. We apply the method on first-principles calculations of four different systems and obtain the propensity rules in each case.

cond-mat.mes-hall