arXiv subjects

Nicole Neveu

Publications and source records attributed to Nicole Neveu.

9 recordsLinked to original sources

arXiv2026

Advanced Control of Electron Beams: Tailoring X-ray Production with Programmable Laser Shaping

Leveraging the full scientific capabilities of next-generation high-repetition-rate free-electron lasers requires programmable control over electron-beam properties at their source. The photoinjector drive laser defines the electron beam's initial six-dimensional phase-space distribution, yet has historically been limited to Gaussian or static flat-top profiles, with most manipulation occurring downstream. Here we demonstrate software-programmable ultraviolet pulse shaping at the LCLS-II photoinjector as a source-level actuator that complements traditional accelerator controls. Using a coupled architecture combining dispersion-controlled nonlinear frequency conversion with spatial-light-modulator spectral shaping, we generate user-defined temporal structures and observe their imprint on electron bunches through high-resolution time-domain diagnostics. Laser-imposed multi-peaked modulation persists through acceleration, magnetic compression, and undulator transport with shot-to-shot repeatability, producing clearly resolved current structure in the compressed beam. Variance-based reconstruction from transverse deflecting cavity measurements reveals structured X-ray emission profiles exhibiting temporal features consistent with the programmed laser waveform. By providing rapid, software-controlled reconfiguration of electron-beam initial conditions, this source-level control approach establishes a programmable upstream actuator for future adaptive optimization and autonomous facility operation at high-repetition-rate light sources.

physics.acc-ph↗

arXiv2026

Upstream Laser-based Longitudinal Enhancement of Relativistic Photoelectrons

Controlling the longitudinal phase space of high-brightness relativistic electron beams is crucial for advancing a broad spectrum of charged-particle-based instrumentation and scientific frontiers. A generalized method for achieving this control involves manipulating the photoemission laser's temporal distribution at the picosecond level, a long-standing technical challenge. Recent developments in laser shaping have enabled the creation of high-power, picosecond-scale symmetrical and asymmetrical temporal profiles, capable of fine-tuning complex space-charge dynamics and external field effects in relativistic charged-particle beams. Here, we demonstrate that rather than deviations from theorized, idealized laser distributions, a controlled asymmetry can be harnessed to counteract accelerator-induced distortions. By implementing spatiotemporal shaping of the ultraviolet photocathode laser at the LCLS-II superconducting injector, we achieve deterministic control over the longitudinal phase space without downstream corrections. We find that this optical asymmetry induces a self-linearizing effect across both low (40 pC) and high (80 pC) charge regimes, effectively suppressing nonlinear compression and energy chirp. Consequently, this approach is expected to preserve a low emittance comparable to that of ideal flattop or regular Gaussian profiles, while delivering superior current uniformity and shot-to-shot stability. These results establish spatiotemporal laser shaping as a compact, generalizable tool for directly optimizing beam brightness at the source.

physics.optics↗

arXiv2024

The LCLS-II Photoinjector Laser Infrastructure

This paper presents a comprehensive technical overview of the Linac Coherent Light Source II (LCLS-II) photoinjector laser system, its first and foremost component. The LCLS-II photoinjector laser system serves as an upgrade to the original LCLS at SLAC National Accelerator Laboratory. This advanced laser system generates high-quality laser beams for LCLS-II, contributing to the instrument's unprecedented brightness, precision, and flexibility. Our discussion extends to the various subsystems that comprise the photoinjector, including the photocathode laser, laser heater, and beam transport systems. Lastly, we draw attention to the ongoing research and development infrastructure underway to enhance the functionality and efficiency of the LCLS-II, and similar X-ray free-electron laser facilities around the world, thereby contributing to the future of laser technology and its applications.

physics.acc-ph↗

arXiv2023

Nonlinearly Shaped Pulses in Photoinjectors and Free-Electron Lasers

Photoinjectors and Free Electron Lasers (FEL) are amongst the most advanced systems in accelerator physics and have consistently pushed the boundaries of emittance and x-ray peak power. In this paper, laser shaping at the cathode is proposed to further lower the emittance and reduce electron beam tails, which would result in brighter x-ray production. Using dispersion controlled nonlinear shaping (DCNS), laser pulses and beam dynamics were simulated in LCLS-II. The photoinjector emittance was optimized and the resulting e-beam profiles were then simulated and optimized in the linac. Finally, the expected FEL performance is estimated and compared to the current technology: Gaussian laser pulses on the cathode. The e-beams produced by DCNS pulses show a potential for 35% increase in x-ray power per pulse during SASE when compared to the standard Gaussian laser pulses.

physics.acc-ph↗

arXiv2022

Comparison of Multiobjective Optimization Methods for the LCLS-II Photoinjector

Particle accelerators are among some of the largest science experiments in the world and can consist of thousands of components with a wide variety of input ranges. These systems can easily become unwieldy optimization problems during design and operations studies. Starting in the early 2000s, searching for better beam dynamics configurations became synonymous with heuristic optimization methods in the accelerator physics community. Genetic algorithms and particle swarm optimization are currently the most widely used. These algorithms can take thousands of simulation evaluations to find optimal solutions for one machine prototype. For large facilities such as the Linac Coherent Light Source (LCLS) and others, this equates to a limited exploration of many possible design configurations. In this paper, the LCLS-II photoinjector is optimized with three optimization algorithms. All optimizations were started from both a uniform random and Latin hypercube sample. In all cases, the optimizations started from Latin hypercube samples outperformed optimizations started from uniform samples. All three algorithms were able to optimize the photoinjector, with the model-based methods approximating the Pareto front in fewer simulation evaluations. This work, in combination with previous optimization observations, indicates objective penalties have a strong impact on the efficiency of such methods. In general, we recommend heuristic methods for initial optimizations and model-based methods when information about the objective space is available.

physics.acc-ph↗

arXiv2021

Temporal shaping of narrow-band picosecond pulses via non-colinear sum-frequency mixing of dispersion-controlled pulses

A long sought-after goal for photocathode electron sources has been to improve performance by temporally shaping the incident exitation laser pulse. The narrow bandwidth, short wavelength, and picosecond pulse duration make it challenging to employ conventional spectral pulse shaping techniques. We present a novel and efficient intensity-envelope shaping technique achieved during nonlinear upconversion through opposite-chirp sum-frequency mixing. We also present a numerical case-study of the LCLS-II photoinjector where transverse electron emittance is improved by at least 25%.

physics.optics↗

arXiv2021

Improving Surrogate Model Accuracy for the LCLS-II Injector Frontend Using Convolutional Neural Networks and Transfer Learning

Machine learning models of accelerator systems (`surrogate models') are able to provide fast, accurate predictions of accelerator physics phenomena. However, approaches to date typically do not include measured input diagnostics, such as the initial beam distributions, which are critical for accurately representing the beam evolution through the system. In addition, these inputs often vary over time, and models that can account for these changing conditions are needed. Simulations are in some cases needed to provide sufficient training data. These typically represent the designed machine before construction; however, the behavior of the installed components may be quite different due to changes over time or static differences that were not modeled. Therefore, surrogate models that can leverage both simulation and measured data successfully are needed. We introduce an approach based on convolutional neural networks that uses the drive laser distribution and scalar settings as inputs for the Linac Coherent Light Source II injector frontend. The model is able to predict scalar beam parameters and the transverse beam distribution downstream, taking into account the impact of time-varying non-uniformities in the initial transverse laser distribution. We also introduce and evaluate a transfer learning procedure for adapting the surrogate model from the simulation domain to the measurement domain, to account for differences between the two. Applying this approach to our test case results in a model that can predict test sample outputs within a mean absolute percent error of 7.6%. This is a substantial improvement over the model trained only on simulations, which has an error of 112.7% when applied to measured data. While we focus on the LCLS-II Injector frontend, these approaches for improving ML-based online modeling of injector systems could be easily adapted to other accelerator facilities.

physics.acc-ph↗

arXiv2020

Machine Learning for Orders of Magnitude Speedup in Multi-Objective Optimization of Particle Accelerator Systems

High-fidelity physics simulations are powerful tools in the design and optimization of charged particle accelerators. However, the computational burden of these simulations often limits their use in practice for design optimization and experiment planning. It also precludes their use as online models tied directly to accelerator operation. We introduce an approach based on machine learning to create nonlinear, fast-executing surrogate models that are informed by a sparse sampling of the physics simulation. The models are 10^6 to 10^7 times more efficient to execute.We also demonstrate that these models can be reliably used with multi-objective optimization to obtain orders-of-magnitude speedup in initial design studies and experiment planning. For example, we required 132 times fewer simulation evaluations to obtain an equivalent solution for our main test case, and initial studies suggest that between 330 to 550 times fewer simulation evaluations are needed when using an iterative retraining process. Our approach enables new ways for high-fidelity particle accelerator simulations to be used, at comparatively little computational cost.

physics.acc-ph↗

arXiv2019

OPAL a Versatile Tool for Charged Particle Accelerator Simulations

Many sophisticated computer models have been developed to understand the behaviour of particle accelerators. Even these complex models often do not describe the measured data. Interactions of the beam with external fields, other particles in the same beam and the beam walls all present modelling challenges. These can be challenging to model correctly even with modern supercomputers. This paper describes OPAL (Object Oriented Parallel Accelerator Library), a parallel open source tool for charged-particle optics in linear accelerators and rings, including 3D space charge. OPAL is built from the ground up as a parallel application exemplifying the fact that high performance computing is the third leg of science, complementing theory and experiment. Using the MAD language with extensions, OPAL can run on a laptop as well as on the largest high performance computing systems. The OPAL framework makes it easy to add new features in the form of new C++ classes, enabling the modelling of many physics processes and field types. OPAL comes in two flavours: OPAL-cycl: tracks particles with 3D space charge including neighbouring turns in cyclotrons and FFAs with time as the independent variable. OPAL-t: models beam lines, linacs, rf-photo injectors and complete XFELs excluding the undulator. The code is managed through the git distributed version control system. A suite of unit tests have been developed for various parts of OPAL, validating each part of the code independently. System tests validate the overall integration of different elements.

physics.acc-ph↗