SearcharxivSearch

arXiv subjects

Nicole Srocka

Publications and source records attributed to Nicole Srocka.

9 recordsLinked to original sources

A Quantum Key Distribution Testbed using a Plug&Play Telecom-wavelength Single-Photon Source

Deterministic solid-state quantum light sources are considered key building blocks for future communication networks. While several proof-of-principle experiments of quantum communication using such sources have been realized, most of them required large setups often involving liquid helium infrastructure or bulky closed-cycle cryotechnology. In this work, we report on the first quantum key distribution (QKD) testbed using a compact benchtop quantum dot single-photon source operating at telecom wavelengths. The plug\&play device emits single-photon pulses at O-band wavelengths ($1321\,$nm) and is based on a directly fiber-pigtailed deterministically-fabricated quantum dot device integrated into a compact Stirling cryocooler. The Stirling is housed in a 19-inch rack module including all accessories required for stand-alone operation. Implemented in a simple QKD testbed emulating the BB84 protocol with polarization coding, we achieve an antibunching of $g^{(2)}(0) = 0.10\pm0.01$ and a raw key rate of up to $(4.72\pm0.13)\,$kHz using an external pump laser. In this setting, we further evaluate the performance of our source in terms of the quantum bit error ratios, secure key rates, and tolerable losses expected in full implementations of QKD also accounting for finite key size effects. Furthermore, we investigate optimal settings for a two-dimensional temporal acceptance window applied on receiver side, resulting in predicted tolerable losses up to $23.19\,$dB. Not least, we compare our results with previous proof-of-concept QKD experiments using quantum dot single-photon sources. Our study represents an important step forward in the development of fiber-based quantum-secured communication networks exploiting sub-Poissonian quantum light sources.

quant-ph

Quantum Efficiency and Oscillator Strength of InGaAs Quantum Dots for Single-Photon Sources emitting in the Telecommunication O-Band

We demonstrate experimental results based on time-resolved photoluminescence spectroscopy to determine the oscillator strength (OS) and the internal quantum efficiency (IQE) of InGaAs quantum dots (QDs). Using a strain-reducing layer (SRL) these QDs can be employed for the manufacturing of single-photon sources (SPS) emitting in the telecom O-Band. The OS and IQE are evaluated by determining the radiative and non-radiative decay rate under variation of the optical density of states at the position of the QD as proposed and applied in J. Johansen et al. Phys. Rev. B 77, 073303 (2008) for InGaAs QDs emitting at wavelengths below 1 $μ$m. For this purpose, we perform measurements on a QD sample for different thicknesses of the capping layer realized by a controlled wet-chemical etching process. From numeric modelling the radiative and nonradiative decay rates dependence on the capping layer thickness, we determine an OS of 24.6 $\pm$ 3.2 and a high IQE of about (85 $\pm$ 10)% for the long-wavelength InGaAs QDs.

physics.app-ph

Thermal stability of emission from single InGaAs/GaAs quantum dots at the telecom O-band

Single-photon sources are key building blocks in most of the emerging secure telecommunication and quantum information processing schemes. Semiconductor quantum dots (QD) have been proven to be the most prospective candidates. However, their practical use in fiber-based quantum communication depends heavily on the possibility of operation in the telecom bands and at temperatures not requiring extensive cryogenic systems. In this paper we present a temperature-dependent study on single QD emission and single-photon emission from metalorganic vapour-phase epitaxy-grown InGaAs/GaAs QDs emitting in the telecom O-band. Micro-photoluminescence studies reveal that trapped holes in the vicinity of a QD act as reservoir of carriers that can be exploited to enhance photoluminescence from trion states observed at elevated temperatures up to at least 80 K. The luminescence quenching is mainly related to the promotion of holes to higher states in the valence band and this aspect must be primarily addressed in order to further increase the thermal stability of emission. Photon autocorrelation measurements yield single photon emission with a purity of $g_{50\mathrm{K}}^{(2)}\left(0\right)=0.13$ up to 50 K. Our results imply that these nanostructures are very promising candidates for single-photon sources at elevated temperatures in the telecom O-band and highlight means for improvements in their performance.

cond-mat.mes-hall

Deterministically fabricated strain-tunable quantum dot single-photon sources emitting in the telecom O-band

Most quantum communication schemes aim at the long-distance transmission of quantum information. In the quantum repeater concept, the transmission line is subdivided into shorter links interconnected by entanglement distribution via Bell-state measurements to overcome inherent channel losses. This concept requires on-demand single-photon sources with a high degree of multi-photon suppression and high indistinguishability within each repeater node. For a successful operation of the repeater, a spectral matching of remote quantum light sources is essential. We present a spectrally tunable single-photon source emitting in the telecom O-band with the potential to function as a building block of a quantum communication network based on optical fibers. A thin membrane of GaAs embedding InGaAs quantum dots (QDs) is attached onto a piezoelectric actuator via gold thermocompression bonding. Here the thin gold layer acts simultaneously as an electrical contact, strain transmission medium and broadband backside mirror for the QD-micromesa. The nanofabrication of the QD-micromesa is based on in-situ electron-beam lithography, which makes it possible to integrate pre-selected single QDs deterministically into the center of monolithic micromesa structures. The QD pre-selection is based on distinct single-QD properties, signal intensity and emission energy. In combination with strain-induced fine tuning this offers a robust method to achieve spectral resonance in the emission of remote QDs. We show that the spectral tuning has no detectable influence on the multi-photon suppression with $g^{(2)}(0)$ as low as 2-4% and that the emission can be stabilized to an accuracy of 4 $μ$eV using a closed-loop optical feedback.

cond-mat.mes-hall

Interplay between emission wavelength and s-p splitting in MOCVD-grown InGaAs/GaAs quantum dots emitting above 1.3 μm

The electronic structure of strain-engineered single InGaAs/GaAs quantum dots emitting in the telecommunication O band is probed experimentally by photoluminescence excitation spectroscopy. Observed resonances can be attributed to p-shell states of individual quantum dots. The determined energy difference between s-shell and p-shell shows an inverse dependence on the emission energy. The experimental data are compared with the results of confined states calculations, where the impact of the size and composition in the investigated structures is simulated within the 8-band $\mathbf{k}\cdot\mathbf{p}$ model. On this basis, the experimental observation is attributed mainly to changes in indium content within individual quantum dots, indicating a way of engineering and selecting a desired quantum dot, whose electronic structure is the most suitable for a given nanophotonic application.

cond-mat.mes-hall

Plug&play fibre-coupled 73 kHz single-photon source operating in the telecom O-band

A user-friendly fibre-coupled single-photon source operating at telecom wavelengths is a key component of photonic quantum networks providing long-haul ultra-secure data exchange. To take full advantage of quantum-mechanical data protection and to maximize the transmission rate and distance, a true quantum source providing single-photons on demand is highly desirable. We tackle this great challenge by developing a ready to use semiconductor quantum dot (QD)-based device that launches single photons at a wavelength of 1.3 um directly into a single-mode optical fibre. In our approach the QD is deterministically integrated into a nanophotonic structure to ensure efficient on-chip coupling into a fibre. The whole arrangement is integrated into a 19" compatible housing to enable stand-alone operation by cooling via a compact Stirling cryocooler. The realized source delivers single photons with multiphoton events probability as low as 0.15 and single-photon emission rate up to 73 kHz into a standard telecom single-mode fibre.

physics.app-ph

Excitonic complexes in MOCVD-grown InGaAs/GaAs quantum dots emitting at telecom wavelengths

Hereby, we present a comprehensive experimental and theoretical study of the electronic structure and optical properties of excitonic complexes in strain-engineered InGaAs/GaAs quantum dots (QDs) grown by metal-organic chemical vapour deposition and emitting at the 1300 nm telecommunication window. Single QD properties have been determined experimentally for a number of nanostructures by means of excitation-power-dependent and polarization-resolved microphotoluminescence and further compared with the results of confined states calculations employing the 8-band kp theory combined with the configuration interaction method. The origin of excitonic complexes has been exemplarily confirmed based on magnetooptical and correlation spectroscopy study. Understanding the influence of structural parameters and compositions (of QDs themselves as well as in the neighbouring strain reducing layer) allows to distinguish which of them are crucial to control the emission wavelength to achieve the telecommunication spectral range or to affect binding energies of the fundamental excitonic complexes. The obtained results provide deeper knowledge on control and on limitations of the investigated structures in terms of good spectral isolation of individual optical transitions and the spatial confinement that are crucial in view of QD applications in single-photon sources of high purity at telecom wavelengths.

cond-mat.mes-hall

Enhanced photon-extraction efficiency from InGaAs/GaAs quantum dots in deterministic photonic structures at 1.3 μm fabricated by in-situ electron-beam lithography

The main challenge in the development of non-classical light sources remains their brightness that limits the data transmission and processing rates as well as the realization of practical devices operating in the telecommunication range. To overcome this issue, we propose to utilize universal and flexible in-situ electron-beam lithography and hereby, we demonstrate a successful technology transfer to telecom wavelengths. As an example, we fabricate and characterize especially designed photonic structures with strain-engineered single InGaAs/GaAs quantum dots that are deterministically integrated into disc-shaped mesas. Utilizing this approach, an extraction efficiency into free-space (within a numerical aperture of 0.4) of (10${\pm}$2) % has been experimentally obtained in the 1.3 μm wavelength range in agreement with finite-element method calculations.

cond-mat.mes-hall

Numerical optimization of the extraction efficiency of a quantum-dot based single-photon emitter into a single-mode fiber

We present a numerical method for the accurate and efficient simulation of strongly localized light sources, such as quantum dots, embedded in dielectric micro-optical structures. We apply the method in order to optimize the photon extraction efficiency of a single-photon emitter consisting of a quantum dot embedded into a multi-layer stack with further lateral structures. Furthermore, we present methods to study the robustness of the extraction efficiency with respect to fabrication errors and defects.

physics.comp-ph