SearcharxivSearch

arXiv subjects

Nikesh Koirala

Publications and source records attributed to Nikesh Koirala.

At least 19 recordsLinked to original sources

Signatures of Majorana Bound States in the Diffraction Patterns of Extended Superconductor-Topological Insulator-Superconductor Josephson Junctions

In an extended superconductor-topological insulator-superconductor (S-TI-S) Josephson junction in a magnetic field, localized Majorana bound states (MBS) are predicted to exist at the cores of Josephson vortices where the local phase difference across the junction is an odd-multiple of $π$. These states contribute a supercurrent with a $4π$-periodic current-phase relation (CPR) that adds to the conventional $2π$-periodic sinusoidal CPR. In this work, we present a comprehensive experimental study of the critical current vs. applied magnetic field diffraction patterns of lateral Nb-Bi$_2$Se$_3$-Nb Josephson junctions. We compare our observations to a model of the Josephson dynamics in the S-TI-S junction system to explore what feature of MBS are, or are not, exhibited in these junctions. Consistent with the model, we find several distinct deviations from a Fraunhofer diffraction pattern that is expected for a uniform sin$(ϕ)$ CPR. In particular, we observe abrupt changes in the diffraction pattern at applied magnetic fields in which the current-carrying localized MBS are expected to enter the junction, and a lifting of the odd-numbered nodes consistent with a $4π$-periodic sin$(ϕ/2)$-component in the CPR. We also see that although the even-numbered nodes often remain fully-formed, we sometimes see deviations that are consistent with quasiparticle-induced fluctuations in the parity of the MBS pairs that encodes quantum information.

cond-mat.supr-con

Dirac surface states in superconductors: a dual topological proximity effect

In this paper we present scanning tunneling microscopy of Bi$_2$Se$_3$ with superconducting Nb deposited on the surface. We find that the topologically protected surface states of the Bi$_2$Se$_3$ leak into the superconducting over-layer, suggesting a dual topological proximity effect. Coupling between theses states and the Nb states leads to an effective pairing mechanism for the surface states, leading to a modified model for a topological superconductor in these systems. This model is consistent with fits between the experimental data and the theory.

cond-mat.supr-con

Ferromagnetic Anomalous Hall Effect in Cr-doped Bi$_2$Se$_3$ Thin Films via Surface-State Engineering

The anomalous Hall effect (AHE) is a non-linear Hall effect appearing in magnetic conductors, boosted by internal magnetism beyond what is expected from the ordinary Hall effect. With the recent discovery of the quantized version of the AHE, the quantum anomalous Hall effect (QAHE), in Cr- or V-doped topological insulator (TI) (Sb,Bi)$_2$Te$_3$ thin films, the AHE in magnetic TIs has been attracting significant interest. However, one of the puzzles in this system has been that while Cr- or V-doped (Sb,Bi)$_2$Te$_3$ and V-doped Bi$_2$Se$_3$ exhibit AHE, Cr-doped Bi$_2$Se$_3$ has failed to exhibit even ferromagnetic AHE, the expected predecessor to the QAHE, though it is the first material predicted to exhibit the QAHE. Here, we have successfully implemented ferromagnetic AHE in Cr-doped Bi$_2$Se$_3$ thin films by utilizing a surface state engineering scheme. Surprisingly, the observed ferromagnetic AHE in the Cr-doped Bi$_2$Se$_3$ thin films exhibited only positive slope regardless of the carrier type. We show that this sign problem can be explained by the intrinsic Berry curvature of the system as calculated from a tight-binding model combined with a first-principles method.

cond-mat.mtrl-sci

Direct visualization of current induced spin accumulation in topological insulators

Charge-to-spin conversion in various material systems is the key for the fundamental understanding of spin-orbitronis as well as the development of efficient means to manipulate the magnetization. We report the direct spatial imaging of current induced spin accumulation at the channel edges of Bi2Se3 and BiSbTeSe2 topological insulators by a scanning photovoltage microscope at room temperature. The spin polarization is along the out-of-plane direction with opposite signs for the two channel edges. The accumulated spin direction reverses sign upon changing the current direction and the detected spin signal shows a linear dependence on the magnitude of currents, which indicates that our observed phenomena are the current induced effects. The spin Hall angle of Bi2Se3 and BiSbTeSe2 is determined to be 0.0085 and 0.0616, respectively. We further image the current induced spin accumulation in a Pt heavy metal. Our results open up the possibility of optically detecting the current induced spin accumulations, and thus point towards a better understanding of the interaction between spins and circularly polarized light.

cond-mat.mes-hall

Strong nonlinear terahertz response induced by Dirac surface states in Bi2Se3 Topological Insulator

Electrons with a linear energy/momentum dispersion are called massless Dirac electrons and represent the low-energy excitations in exotic materials like Graphene and Topological Insulators (TIs). Dirac electrons are characterized by notable properties like a high mobility, a tunable density and, in TIs, a protection against backscattering through the spin-momentum looking mechanism. All those properties make Graphene and TIs appealling for plasmonics applications. However, Dirac electrons are expected to present also a strong nonlinear optical behavior. This should mirror in phenomena like electromagnetic induced transparency (EIT) and harmonic generation. Here, we demonstrate that in Bi2Se3 Topological Insulator, an EIT is achieved under the application of a strong terahertz (THz) electric field. This effect, concomitant determined by harmonic generation and charge-mobility reduction, is exclusively related to the presence of Dirac electron at the surface of Bi2Se_3, and opens the road towards tunable THz nonlinear optical devices based on Topological Insulator materials.

cond-mat.mes-hall

Solution to the hole-doping problem and tunable quantum Hall effect in Bi$_{2}$Se$_{3}$ thin films

Bi$_{2}$Se$_{3}$, one of the most widely studied topological insulators (TIs), is naturally electron-doped due to n-type native defects. However, many years of efforts to achieve p-type Bi$_{2}$Se$_{3}$ thin films have failed so far. Here, we provide a solution to this long-standing problem, showing that the main culprit has been the high density of interfacial defects. By suppressing these defects through an interfacial engineering scheme, we have successfully implemented p-type Bi$_{2}$Se$_{3}$ thin films down to the thinnest topological regime. On this platform, we present the first tunable quantum Hall effect (QHE) study in Bi$_{2}$Se$_{3}$ thin films, and reveal not only significantly asymmetric QHE signatures across the Dirac point but also the presence of competing anomalous states near the zeroth Landau level. The availability of doping tunable Bi$_{2}$Se$_{3}$ thin films will now make it possible to implement various topological quantum devices, previously inaccessible.

cond-mat.mtrl-sci

A novel artificial condensed matter lattice and a new platform for one-dimensional topological phases

Engineered lattices in condensed matter physics, such as cold atom optical lattices or photonic crystals, can have fundamentally different properties from naturally-occurring electronic crystals. Here, we report a novel type of artificial quantum matter lattice. Our lattice is a multilayer heterostructure built from alternating thin films of topological and trivial insulators. Each interface within the heterostructure hosts a set of topologically-protected interface states, and by making the layers sufficiently thin, we demonstrate for the first time a hybridization of interface states across layers. In this way, our heterostructure forms an emergent atomic chain, where the interfaces act as lattice sites and the interface states act as atomic orbitals, as seen from our measurements by angle-resolved photoemission spectroscopy (ARPES). By changing the composition of the heterostructure, we can directly control hopping between lattice sites. We realize a topological and a trivial phase in our superlattice band structure. We argue that the superlattice may be characterized in a significant way by a one-dimensional topological invariant, closely related to the invariant of the Su-Schrieffer-Heeger model. Our topological insulator heterostructure demonstrates a novel experimental platform where we can engineer band structures by directly controlling how electrons hop between lattice sites.

cond-mat.mtrl-sci

Helicity dependent photovoltaic effect in Bi2Se3 under normal incident light

Topological insulators (TIs) form a new class of materials with insulating bulk and surface conduction ensured by topologically protected surface states (TPSS). We investigate the impact of the helicity of a normally incident laser beam on the photovoltaic effect in the TI Bi2Se3. The observation of a helicity dependent photovoltaic effect for normally incident light indicates the presence of out-of-plane spin components for some TPSSs due to the hexagonal warping. In addition, fluctuations in the electrostatic potential at the surface locally break the rotational symmetry of the film allowing the helicity dependent photovoltaic effect. Our result suggests that engineering local electrostatic potentials in Bi2Se3 would allow the control of optically generated spin currents, which may be useful for applications in spin-optoelectronics.

cond-mat.mtrl-sci

Disorder-driven topological phase transition in Bi2Se3 films

Topological insulators (TI) are a phase of matter that host unusual metallic states on their surfaces. Unlike the states that exist on the surface of conventional materials, these so-called topological surfaces states (TSS) are protected against disorder-related localization effects by time reversal symmetry through strong spin-orbit coupling. By combining transport measurements, angle-resolved photo-emission spectroscopy and scanning tunneling microscopy, we show that there exists a critical level of disorder beyond which the TI Bi2Se3 loses its ability to protect the metallic TSS and transitions to a fully insulating state. The absence of the metallic surface channels dictates that there is a change in topological character, implying that disorder can lead to a topological phase transition even without breaking the time reversal symmetry. This observation challenges the conventional notion of topologically-protected surface states, and will provoke new studies as to the fundamental nature of topological phase of matter in the presence of disorder.

cond-mat.mtrl-sci

Finite-size and composition-driven topological phase transition in (Bi$_{1-x}$In$_x$)$_2$Se$_3$ thin films

In a topological insulator (TI), if its spin-orbit coupling (SOC) strength is gradually reduced, the TI eventually transforms into a trivial insulator beyond a critical point of SOC, at which point the bulk gap closes: this is the standard description of the topological phase transition (TPT). However, this description of TPT, driven solely by the SOC (or something equivalent) and followed by closing and reopening of the bulk band gap, is valid only for infinite-size samples, and little is known how TPT occurs for finite-size samples. Here, using both systematic transport measurements on interface-engineered(Bi$_{1-x}$In$_x$)$_2$Se$_3$ thin films and theoretical simulations (with animations in Supporting Information) we show that description of TPT in finite-size samples needs to be substantially modified from the conventional picture of TPT due to surface-state hybridization and bulk confinement effects. We also show that the finite-size TPT is composed of two separate transitions, topological-normal transition (TNT) and metal-insulator transition (MIT) by providing a detailed phase diagram in the two-dimensional phase space of sample size and SOC strength.

cond-mat.mtrl-sci

Tunable inverse topological heterostructure utilizing $(Bi_{1-x}In_{x})_{2}Se_{3}$

In typical topological insulator (TI) systems the TI is bordered by a non-TI insulator, and the surrounding conventional insulators, including vacuum, are not generally treated as part of the TI system. Here, we implement the first material system where the roles are reversed, and the TSS form around the non-TI (instead of the TI) layers. This is realized by growing a layer of the tunable non-TI $(Bi_{1-x}In_{x})_{2}Se_{3}$ in between two layers of the TI $Bi_2Se_3$ using the atomically-precise molecular beam epitaxy technique. On this tunable inverse topological platform, we systematically vary the thickness and the composition of the $(Bi_{1-x}In_{x})_{2}Se_{3}$ layer and show that this tunes the coupling between the TI layers from strongly-coupled metallic to weakly-coupled, and finally to a fully-decoupled insulating regime. This system can be used to probe the fundamental nature of coupling in TI materials and provides a tunable insulating layer for TI devices.

cond-mat.mtrl-sci

Record Surface State Mobility and Quantum Hall Effect in Topological Insulator Thin Films via Interface Engineering

Material defects remain as the main bottleneck to the progress of topological insulators (TIs). In particular, efforts to achieve thin TI samples with dominant surface transport have always led to increased defects and degraded mobilities, thus making it difficult to probe the quantum regime of the topological surface states. Here, by utilizing a novel buffer layer scheme composed of an In2Se3/(Bi0.5In0.5)2Se3 heterostructure, we introduce a quantum generation of Bi2Se3 films with an order of magnitude enhanced mobilities than before. This scheme has led to the first observation of the quantum Hall effect in Bi2Se3.

cond-mat.mtrl-sci

Stability of low-carrier-density topological-insulator Bi$_2$Se$_3$ thin films and effect of capping layers

Although over the past number of years there have been many advances in the materials aspects of topological insulators (TI), one of the ongoing challenges with these materials is the protection of them against aging. In particular, the recent development of low-carrier-density bulk-insulating Bi$_2$Se$_3$ thin films and their sensitivity to air demands reliable capping layers to stabilize their electronic properties. Here, we study the stability of the low-carrier-density Bi$_2$Se$_3$ thin films in air with and without various capping layers using DC and THz probes. Without any capping layers, the carrier density increases by ~150% over a week and by ~280% over 9 months. In situ-deposited Se and ex situ-deposited Poly(methyl methacrylate) (PMMA) suppresses the aging effect to ~27% and ~88% respectively over 9 months. The combination of effective capping layers and low-carrier-density TI films will open up new opportunities in topological insulators.

cond-mat.mtrl-sci

Topological Surface States Originated Spin-Orbit Torques in Bi2Se3

Three dimensional topological insulator bismuth selenide (Bi2Se3) is expected to possess strong spin-orbit coupling and spin-textured topological surface states, and thus exhibit a high charge to spin current conversion efficiency. We evaluate spin-orbit torques in Bi2Se3/Co40Fe40B20 devices at different temperatures by spin torque ferromagnetic resonance measurements. As temperature decreases, the spin-orbit torque ratio increases from ~ 0.047 at 300 K to ~ 0.42 below 50 K. Moreover, we observe a significant out-of-plane torque at low temperatures. Detailed analysis indicates that the origin of the observed spin-orbit torques is topological surface states in Bi2Se3. Our results suggest that topological insulators with strong spin-orbit coupling could be promising candidates as highly efficient spin current sources for exploring next generation of spintronic applications.

cond-mat.mtrl-sci

Plasmon-phonon interactions in topological insulator rings

The great potential of Dirac electrons for plasmonics and photonics has been readily recognized after their discovery in graphene, followed by applications to smart optical devices. Dirac carriers are also found in topological insulators (TI) --quantum systems having an insulating gap in the bulk and intrinsic Dirac metallic states at the surface--. Here, we investigate the plasmonic response of ring structures patterned in Bi$_2$Se$_3$ TI films, which we investigate through terahertz (THz) spectroscopy. The rings are observed to exhibit a bonding and an antibonding plasmon modes, which we tune in frequency by varying their diameter. We develop an analytical theory based on the THz conductivity of unpatterned films, which accurately describes the strong plasmon-phonon hybridization and Fano interference experimentally observed as the bonding plasmon is swiped across the promineng 2\,THz phonon exhibited by this material. This work opens the road for the investigation of plasmons in topological insulators and for their application in tunable THz devices.

cond-mat.mtrl-sci

Restoring Pristine Bi2Se3 Surface with an Effective Se Decapping Process

High quality thin films of topological insulators (TI) such as Bi2Se3 have been successfully synthesized by molecular beam epitaxy (MBE). Although the surface of MBE films can be protected by capping with inert materials such as amorphous Se, restoring an atomically clean pristine surface after decapping has never been demonstrated, which prevents in-depth investigations of the intrinsic properties of TI thin films with ex-situ tools. Using high resolution scanning tunneling microscopy/spectroscopy (STM/STS), we demonstrate a simple and highly reproducible Se decapping method that allows recovery of the pristine surface of extremely high quality Bi2Se3 thin films grown and capped with Se in a separate MBE system then exposed to atmosphere during transfer into the STM system. The crucial step of our decapping process is the removal of the surface contaminants on top of amorphous Se before thermal desorption of Se at a mild temperature (~210 °C). This effective Se decapping process opens up the possibility of ex-situ characterizations of pristine surfaces of interesting selenide materials and beyond using cutting-edge techniques.

cond-mat.mtrl-sci

Observation of inverse spin Hall effect in bismuth selenide

Bismuth Selenide (Bi2Se3) is a topological insulator exhibiting helical spin polarization and strong spin-orbit coupling. The spin-orbit coupling links the charge current to spin current via the spin Hall effect (SHE). We demonstrate a Bi2Se3 spin detector by injecting the pure spin current from a magnetic permalloy layer to a Bi2Se3 thin film and detect the inverse SHE in Bi2Se3. The spin Hall angle of Bi2Se3 is found to be 0.0093 and the spin diffusion length in Bi2Se3 to be 6.2 nm at room temperature. Our results suggest that topological insulators with strong spin-orbit coupling can be used in functional spintronic devices.

cond-mat.mtrl-sci

Transport Properties of Topological Insulators: Band Bending, Bulk Metal-to-Insulator Transition, and Weak Anti-Localization

We reanalyze some of the critical transport experiments and provide a coherent understanding of the current generation of topological insulators (TIs). Currently TI transport studies abound with widely varying claims of the surface and bulk states, often times contradicting each other, and a proper understanding of TI transport properties is lacking. According to the simple criteria given by Mott and Ioffe-Regel, even the best TIs are not true insulators in the Mott sense, and at best, are weakly-insulating bad metals. However, band-bending effects contribute significantly to the TI transport properties including Shubnikov de-Haas oscillations, and we show that utilization of this band-bending effect can lead to a Mott insulating bulk state in the thin regime. In addition, by reconsidering previous results on the weak anti-localization (WAL) effect with additional new data, we correct a misunderstanding in the literature and generate a coherent picture of the WAL effect in TIs.

cond-mat.mtrl-sci