arXiv subjects

Nikita Nikulsin

Publications and source records attributed to Nikita Nikulsin.

10 recordsLinked to original sources

arXiv2026

Compact quasiaxisymmetric stellarators, a near axisymmetric theory

We develop a theory of ridges in compact stellarators with quasiaxisymmetry (QA). The equilibrium with finite plasma currents and pressure is modeled by ideal magnetohydrostatics (MHS). Field lines are collimated near sharp ridges, much like X-points, making ridges attractive to divertor designs without the requirement of a rational rotational transform at the divertor. However, unlike X-points, which must cover the entire torus an integer number of times, sharp ridges are typically localized in certain parts of the flux surfaces. Motivated by recent work (Henneberg and Plunk, Phys. Rev. Research 6, L022052) on compact hybrid devices, we develop a perturbative treatment of nearly axisymmetric quasisymmetric devices by expanding in the deviation from perfect axisymmetry. As a result, we can analytically describe the key features of compact QA devices, such as the tendency for ridges to be localized on the inboard side, where the Gaussian curvature is typically negative, and the field strength is maximum. We provide comprehensive numerical evidence in support of our analytical theory.

physics.plasm-ph↗

arXiv2026

On the Shafranov shift in stellarators

As first shown by Shafranov, toroidal plasmas in magnetohydrodynamic equilibrium tend to expand in major radius when the pressure is increased. Here, an average measure of the resulting Shafranov shift is introduced, and its properties are discussed for various classes of optimised stellarator configurations. It is shown to be particularly small in quasi-helical and quasi-isodynamic stellarators with a large number of field periods, which are thus particularly robust to variations in the plasma pressure.

physics.plasm-ph↗

arXiv2026

Optical analogy for stellarators: Ridges as caustics and coils as singularities

A common feature of most numerically optimized stellarator geometries is the presence of sharp ridges on outer flux surfaces, irrespective of the rotational transform. Despite their importance, an analytical theory for their existence has been lacking. In this work, we demonstrate that ridges are not artifacts but mathematical necessities. We develop such a theory for devices with quasisymmetry (QS). We demonstrate that QS exhibits close connections with the theory of geometrical optics, following Parker's ``optical analogy" (E.N. Parker, Geophys. Astrophys. Fluid Dyn, 1989). By mapping vacuum QS to the eikonal equation of geometrical optics, we derive the conditions for ridge formation, identified as field line caustics where magnetic field lines focus. Furthermore, we prove a geometric theorem for stellarator coil design: both ridges and filamentary coils must lie on the zero-determinant manifold of the magnetic gradient tensor. This topological constraint unifies the description of plasma ridges and external coils, providing a precise criterion for identifying valid coil locations and explaining the efficacy of the magnetic gradient lengthscale (J. Kappel et al., Plasma Phys. Control. Fusion, 2024) as a coil optimization parameter. We demonstrate that as the device becomes more compact, sharp ridges naturally form on the inboard side in quasiaxisymmetry. We support our analytical theory with extensive numerical evidence.

physics.plasm-ph↗

arXiv2025

A class of high-beta, large-aspect-ratio quasiaxisymmetric Palumbo-like configurations

The space of high-beta, approximately quasiaxisymmetric, large-aspect-ratio stellarator configurations is explored using an inverse coordinate approach and a quadratic polynomial ansatz for the flux function, following the method of Palumbo, extended by Hernandes and Clemente. This approach yields a system of nonlinear ODEs that, when solved, give equilibria exhibiting positive or negative triangularity, cusps, and (in an extreme limit) current singularities. It is shown that a cubic ansatz may also be used, but that polynomials of degree four or higher will lead to overdetermination.

physics.plasm-ph↗

arXiv2025

A Grad-Shafranov model for compact quasisymmetric stellarators

A Grad-Shafranov equation (GSE) valid for compact quasisymmetric stellarators is derived by an asymptotic expansion around a vacuum field carried to first order. We obtain an equation for the existence of flux surfaces leading up to the GSE. The flux surface label must simultaneously satisfy the existence equation and the GSE, which generally leads to an overdetermined problem. We show how the overdetermined problem can be resolved within our model for a class of hybrid devices similar to that studied by Henneberg and Plunk (S. Henneberg and G. Plunk, PRR 2024). We are also able to solve the existence equation for flux surfaces analytically in the most general case by introducing a special coordinate system. This will enable us to carry out an optimization seeking to minimize the error in our GSE while obeying the flux surface existence equation, which will allow us to find solutions outside the class of hybrid devices. This will allow for a coarse-grained approximate search in the space of quasisymmetric equilibria that should be faster than a conventional stellarator optimization. Nevertheless, it would still be necessary to fine-tune the approximate solutions using conventional tools to obtain a more precise optimized equilibrium.

physics.plasm-ph↗

arXiv2024

An asymptotic Grad-Shafranov equation for quasisymmetric stellarators

A first-order model is derived for quasisymmetric stellarators where the vacuum field due to coils is dominant, but plasma-current-induced terms are not negligible and can contribute to magnetic differential equations, with $β$ of the order of the ratio of induced to vacuum fields. Under these assumptions, it is proven that the aspect ratio must be large and a simple expression can be obtained for the lowest-order vacuum field. The first-order correction, which involves both vacuum and current-driven fields, is governed by a Grad-Shafranov equation and the requirement that flux surfaces exist. These two equations are not always consistent, and so this model is generally overconstrained, but special solutions exist that satisfy both equations simultaneously. One family of such solutions are the first-order near-axis solutions. Thus, the first-order near-axis model is a subset of the model presented here. Several other solutions outside the scope of the near-axis model are also found. A case study comparing one such solution to a VMEC-generated solution shows good agreement.

physics.plasm-ph↗

arXiv2024

Nonlinear MHD modeling of soft $β$ limits in W7-AS

An important question for the outlook of stellarator reactors is their robustness against pressure driven modes, and the underlying mechanism behind experimentally observed soft $β$ limits. Towards building a robust answer to these questions, simulation studies are presented using a recently derived reduced nonlinear MHD model. First, the initial model implementation is extended to capture fluid compression by including the influence of parallel flows. Linear benchmarks of a (2, 1) tearing mode in W7-AS geometry, and interchange modes in a finite $β$, net-zero current carrying stellarator with low magnetic shear are then used to demonstrate the modeling capabilities. Finally, a validation study is conducted on experimental reconstructions of finite $β$ W7-AS discharges. In agreement with past experimental analysis, it is shown that (i) the MHD activity is resistive, (ii) a soft $β$ limit is observed, when the plasma resistivity approaches the estimated experimental value, and (iii) low $n$ MHD activity is observed at intermediate $β$ values, particularly a nonlinearly dominant (2, 1) mode. The MHD activity is mild, explaining the soft $β$ limit, because the plasma volume remains separated into distinct sub-volumes in which field lines are ergodically confined. For the assumed transport parameters, the enhanced perpendicular transport along stochastic magnetic field lines can be overcome with the experimental heating power. The limitations in the current modeling are described, alongside an outlook for characterising soft $β$ limits in more detail in future work.

physics.plasm-ph↗

arXiv2022

JOREK3D: An extension of the JOREK nonlinear MHD code to stellarators

Although the basic concept of a stellarator was known since the early days of fusion research, advances in computational technology have enabled the modelling of increasingly complicated devices, leading up to the construction of Wendelstein 7-X, which has recently shown promising results. This recent success has revived interest in the nonlinear 3D MHD modelling of stellarators in order to better understand their performance and operational limits. This paper reports on the extension of the JOREK code to 3D geometries and on the first stellarator simulations carried out with it. The first simple simulations shown here address the classic Wendelstein 7-A stellarator using a reduced MHD model previously derived by us. The results demonstrate that stable full MHD equilibria are preserved in the reduced model: the flux surfaces do not move throughout the simulation, and closely match the flux surfaces of the full MHD equilibrium. Further, both tearing and ballooning modes were simulated, and the linear growth rates measured in JOREK are in reasonable agreement with the growth rates from the CASTOR3D linear MHD code.

physics.plasm-ph↗

arXiv2021

Testing of the new JOREK stellarator-capable model in the tokamak limit

In preparation for extending the JOREK nonlinear MHD code to stellarators, a hierarchy of stellarator-capable reduced and full MHD models has been derived and tested. The derivation was presented at the EFTC 2019 conference. Continuing this line of work, we have implemented the reduced MHD model (arXiv:1907.12486) as well as an alternative model which was newly derived using a different set of projection operators for obtaining the scalar momentum equations from the full MHD vector momentum equation. With the new operators, the reduced model matches the standard JOREK reduced models for tokamaks in the tokamak limit and conserves energy exactly, while momentum conservation is less accurate than in the original model whenever field-aligned flow is present.

physics.plasm-ph↗

arXiv2019

A three-dimensional reduced MHD model consistent with full MHD

Within the context of a viscoresistive magnetohydrodynamic (MHD) model with anisotropic heat transport and cross-field mass diffusion, we introduce novel three-term representations for the magnetic field (background vacuum field, field line bending and field compression) and velocity ($\vec E\times\vec B$ flow, field-aligned flow and fluid compression), which are amenable to three-dimensional treatment. Once the representations are inserted into the MHD equations, appropriate projection operators are applied to Faraday's law and the Navier-Stokes equation to obtain a system of scalar equations that is closed by the continuity and energy equations. If the background vacuum field is sufficiently strong and the $β$ is low, MHD waves are approximately separated by the three terms in the velocity representation, with each term containing a specific wave. Thus, by setting the appropriate term to zero, we eliminate fast magnetosonic waves, obtaining a reduced MHD model. We also show that the other two velocity terms do not compress the magnetic field, which allows us to set the field compression term to zero within the same reduced model. Dropping also the field-aligned flow, a further simplified model is obtained, leading to a fully consistent hierarchy of reduced and full MHD models for 3D plasma configurations. Finally, we discuss the conservation properties and derive the conditions under which the reduction approximation is valid. We also show that by using an ordering approach, reduced MHD equations similar to what we got from the ansatz approach can be obtained by means of a physics-based asymptotic expansion.

physics.plasm-ph↗