arXiv subjects

Nikita S. Smirnov

Publications and source records attributed to Nikita S. Smirnov.

10 recordsLinked to original sources

arXiv2026

High-fidelity two-qubit gates with transmon qubits using bipolar flux pulses and tunable couplers

High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of $99.5\%$. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below $1 \times 10^{-3}$ is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors

quant-ph↗

arXiv2026

Tantalum as a base material for superconducting integrated circuits

The performance of superconducting integrated circuits for quantum applications is fundamentally limited by material-related losses. Tantalum, as an emerging material for next-generation quantum circuits, has attracted considerable attention in recent years after demonstrating breakthrough performance in both superconducting microwave resonators and qubits. Concurrently, a growing body of work is devoted to the operation of tantalum-based circuits and related fabrication techniques. This interest is further stimulated by tantalum thin films polymorphism resulting in a variety of its crystalline structure, superconducting properties, coherence, etc. Furthermore, tantalum circuits exhibit distinctive features in cryogenic experiments, which have not been observed in aluminum- or niobium-based ones. In this review, we summarize the recent research of tantalum thin films growth and phase selection mechanisms on various substrates, key aspects of fabrication and performance of superconducting circuit, including a material first-principles theoretical study. In conclusion, we address a number of open issues, including the role of \b{eta}-phase impurities, the effect of hydrofluoric acid solutions on chain characteristics, and the anomalous behavior of α-tantalum chains at cryogenic temperatures.

quant-ph↗

arXiv2026

Superconducting integrated on-demand quantum memory with microwave pulse preservation

Microwave quantum memory represents a critical component for quantum radars and resource-efficient approaches to quantum error correction. Superconducting microwave resonators provide highly efficient storage, long coherence times, on-demand reading and even in memory pulse engineering, but it is still challenging to overcome design and materials induced loss channels for on-chip realization. In this work, we present a novel architecture of integrated superconducting quantum memory with a dynamically controlled RF-SQUID coupling element in pulse regime, thus ensuring high efficiency storage and cycling storage time. It demonstrates a memory cycle time of 1.51 $μs$ and 57.5% storage fidelity with preservation of the stored pulse shape during the retrieval at single-photon level excitations. We establish that while the proposed active coupler realization introduces no measurable fidelity degradation, the primary limitation arises from impedance matching and materials imperfections. Still the device was used only for storing finite-duration near-single-photon classical microwave pulses, we assert that it operates as a linear device when the photon population in the common resonator remains low so it should be compatible with quantum state storage.The proposed architecture highlights a disruptive potential for on-chip qubit and memory integration for scalable quantum error correction, while identifying specific avenues for near-unity storage fidelity.

quant-ph↗

arXiv2025

An engineering guide to superconducting quantum circuit shielding

In this review, we provide a practical guide on protection of superconducting quantum circuits from broadband electromagnetic and infrared-radiation noise by using cryogenic shielding and filtering of microwave lines. Recently, superconducting multi-qubit processors demonstrated quantum supremacy and quantum error correction below the surface code threshold. However, the decoherence-induced loss of quantum information still remains a challenge for more than 100 qubit quantum computing. Here, we review the key aspects of superconducting quantum circuits protection from stray electromagnetic fields and infrared radiation, namely, multilayer shielding design, materials, filtering of the fridge lines and attenuation, cryogenic setup configurations, and methods for shielding efficiency evaluation developed over the last 10 years. In summary, we make recommendations for creation of an efficient and compact shielding system as well as microwave filtering for a large-scale superconducting quantum systems.

quant-ph↗

arXiv2024

Wafer-scale uniformity improvement of Dolan-bridge Josephson junction by shadow evaporation bias correction

One of the practical limitations of solid-state superconducting quantum processors technology is frequency crowding due to low qubits fabrication reproducibility. Josephson junction 100 nm-scale nonlinear inductance of the qubits still suffers from Dolan-bridge shadow evaporation process. Here, we report on a robust wafer-scale Al/AlOx/Al Dolan-bridge Josephson junction (JJ) process using preliminary shadow evaporation bias resist mask correction and comprehensive oxidation optimization. We introduce topology correction model for two-layer resist mask biasing at a wafer-scale, which takes into account an evaporation source geometry. It results in Josephson junction area variation coefficient improvement down to 1.1% for the critical dimensions from 130x170 nm2 to 130x670 nm2 over 70x70 mm2 (49 cm2) wafer working area. Next, we investigate JJ oxidation process (oxidation method, pressure and time) and its impact on a room temperature resistance reproducibility. Finally, we combine both shadow evaporation bias correction and oxidation best practices for 4-inch wafers improving room temperature resistance variation coefficient down to 6.0/5.2/4.1% for 0.025 μm2 JJ area and 4.0/3.4/2.3% for 0.090 μm2 JJ area for 49/25/16 cm2 wafer working area correspondingly. The proposed model and oxidation method can be useful for robust wafer-scale superconducting quantum processors fabrication.

quant-ph↗

arXiv2023

Wiring surface loss of a superconducting transmon qubit

Quantum processors using superconducting qubits suffer from dielectric loss leading to noise and dissipation. Qubits are usually designed as large capacitor pads connected to a non-linear Josephson junction (or SQUID) by a superconducting thin metal wiring. Here, we report on finite-element simulation and experimental results confirming that more than 50% of surface loss in transmon qubits can originated from Josephson junctions wiring and can limit qubit relaxation time. Extracting dielectric loss tangents capacitor pads and wiring based on their participation ratios, we show dominant surface loss of wiring can occur for real qubits designs. Then, we simulate a qubit coupled to a bath of individual TLS defects and show that only a small fraction (~18%) of coupled defects is located within the wiring interfaces, however, their coupling strength is much higher due to stronger electromagnetic field. Finally, we fabricate six tunable floating transmon qubits and experimentally demonstrate up to 20% improvement in qubit quality factor by wiring design optimization.

quant-ph↗

arXiv2023

Coupler microwave-activated controlled phase gate on fluxonium qubits

Tunable couplers have recently become one of the most powerful tools for implementing two-qubit gates between superconducting qubits. A tunable coupler typically includes a nonlinear element, such as a SQUID, which is used to tune the resonance frequency of an LC circuit connecting two qubits. Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself. Due to strong effective longitudinal coupling between the coupler and the qubits, the frequency of this transition strongly depends on the computational state, leading to different phase accumulations in different states. Using this method, we experimentally demonstrate a CZ gate of 44 ns duration on a fluxonium-based quantum processor, obtaining a fidelity of $97.6\pm 0.4 \%$ characterized by cross-entropy benchmarking.

quant-ph↗

arXiv2022

Robust cryogenic matched low-pass coaxial filters for quantum computing applications

Electromagnetic noise is one of the key external factors decreasing superconducting qubits coherence. Matched coaxial filters can prevent microwave and IR photons negative influence on superconducting quantum circuits. Here, we report on design and fabrication route of matched low-pass coaxial filters for noise-sensitive measurements at milliKelvin temperatures. A robust transmission coefficient with designed linear absorption (-1dB/GHz) and ultralow reflection losses less than -20 dB up to 20 GHz is achieved. We present a mathematical model for evaluating and predicting filters transmission parameters depending on their dimensions. It is experimentally approved on two filters prototypes different lengths with compound of Cu powder and Stycast commercial resin demonstrating excellent matching. The presented design and assembly route are universal for various compounds and provide high repeatability of geometrical and microwave characteristics. Finally, we demonstrate three filters with almost equal reflection and transmission characteristics in the range from 0 to 20 GHz, which is quite useful to control multiple channel superconducting quantum circuits.

quant-ph↗

arXiv2022

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high fidelity single-qubit and two-qubit gates, single-shot readout and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element following our theoretical proposal [DOI: 10.1063/5.0064800]. We experimentally demonstrate fSim-type and controlled-Z gates with $99.55\%$ and $99.23\%$ fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz level. Using a galvanically coupled flux control line, we implement high fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

quant-ph↗

arXiv2020

Topological photon pairs in a superconducting quantum metamaterial

Recent discoveries in topological physics hold a promise for disorder-robust quantum systems and technologies. Topological states provide the crucial ingredient of such systems featuring increased robustness to disorder and imperfections. Here, we use an array of superconducting qubits to engineer a one-dimensional topologically nontrivial quantum metamaterial. By performing microwave spectroscopy of the fabricated array, we experimentally observe the spectrum of elementary excitations. We find not only the single-photon topological states but also the bands of exotic bound photon pairs arising due to the inherent anharmonicity of qubits. Furthermore, we detect the signatures of the two-photon bound edge-localized state which hints towards interaction-induced localization in our system. Our work demonstrates an experimental implementation of the topological model with attractive photon-photon interaction in a quantum metamaterial.

cond-mat.mes-hall↗