arXiv subjects

Niklas J. Glaser

Publications and source records attributed to Niklas J. Glaser.

11 recordsLinked to original sources

arXiv2026

A high-fidelity two-qubit gate for multimode superconducting P-mon qubits

To scale superconducting quantum processors, it is essential to achieve long coherence times while engineering interactions that do not introduce additional decoherence channels. In superconducting qubit systems, this can be realized using multimode circuits that feature a protected qubit mode alongside a distinct mediator mode. Building on this concept, our recently developed P-mon qubit provides intrinsic protection against decoherence from the readout environment. We extend this approach to controlled two-qubit interactions, by exploiting the mediator modes of P-mons for on-demand coupling. Because direct interactions between the qubit modes are strongly suppressed, unwanted $ZZ$-type interactions are significantly reduced to below $3.6(5)~\text{kHz}$ in the idle state. When tuning the coupled mediator modes on resonance, the cross-Kerr interaction between the qubit and the hybridized mediator modes leads to a qubit-state dependent frequency shift. By selectively addressing these transitions, we implement a $180~\text{ns}$ long CZ gate and determine a fidelity of $99.62(4)~\text{%}$. These results represent a significant step toward a scalable superconducting architecture that maintains high performance at scale.

quant-ph↗

arXiv2026

Dynamical Decoupling using Universal Optimal Tracking

Dynamical decoupling (DD) is a widely used and resource-efficient technique for error suppression, but conventional DD relies on periodically repeating a short pulse block to refocus the qubit state during idle periods. Imperfections in this block cause residual errors to accumulate, ultimately degrading state recovery over long idle times. Here, we introduce a universal optimal tracking approach that extends the original tracking concept to a fully state-independent setting for designing DD sequences. By monitoring the qubit's evolution at predefined waypoints during optimization, the method dynamically compensates residual errors while preserving regular refocusing. Experimental demonstrations on a superconducting-qubit platform confirm the suppression of error accumulation under static control imperfections, in agreement with numerical predictions. Complementary simulations further show that optimal-tracking-based sequences maintain strong performance under time-dependent noise. These results establish optimal tracking as a practical and hardware-agnostic approach to designing short, robust DD sequences suitable for noisy quantum devices.

quant-ph↗

arXiv2026

Scalable Single-Step Generation of W States in 2D Superconducting Qubit Lattices

The reliable generation of multi-qubit entanglement is a prerequisite for large-scale quantum information technologies. In particular, W states are a valuable resource owing to their resilience under local loss or measurement. Nevertheless, preparing these states with sequential two-qubit gates often requires substantial time overhead. By contrast, engineered simultaneous interactions enable fast entanglement generation, even in qubit systems with limited nearest-neighbour connectivity. Here, we demonstrate a set of fast and robust operations for coherently distributing a single excitation across a lattice of arbitrary size, thereby directly generating W states from initial product states. In 2D lattices, the excitation propagates along both directions simultaneously, such that the total entanglement time scales only with the largest dimension. We exploit this property to prepare a six-qubit W state in a 3$\times$2 superconducting lattice within 99 ns, achieving a tomographic fidelity of 83.9$\pm$1.0%. We then extend the protocol to create entanglement across chains of up to seven qubits, with the largest W state generated in 264 ns with a fidelity of 79.6$\pm$1.3%.

quant-ph↗

arXiv2025

Superconducting Qubit Gates Robust to Parameter Fluctuations

State-of-the-art single-qubit gates on superconducting transmon qubits can achieve the fidelities required for error-corrected computations. However, parameter fluctuations due to qubit instabilities, environmental changes, and control inaccuracies make it difficult to maintain this performance. To mitigate the effects of these parameter variations, we numerically derive gates robust to amplitude and frequency errors using gradient ascent pulse engineering (GRAPE). We analyze how fluctuations in qubit frequency, drive amplitude, and coherence affect gate performance over time. The robust pulses suppress coherent errors from drive amplitude drifts over 15 times more than a Gaussian pulse with derivative removal by adiabatic gate (DRAG) corrections. Furthermore, the robust gates, originally designed to compensate for quasi-static errors, also demonstrate resilience to stochastic, time-dependent noise, which is reflected in the dephasing time. They suppress added errors during increases in dephasing by up to 1.7 times more than DRAG.

quant-ph↗

arXiv2025

Sub-Harmonic Control of a Fluxonium Qubit via a Purcell-Protected Flux Line

Protecting qubits from environmental noise while maintaining strong coupling for fast high-fidelity control is a central challenge for quantum information processing. Here, we demonstrate a control scheme for superconducting fluxonium qubits that eliminates qubit decay through the control channel by suppressing the environmental density of states at the transition frequency. Adding a low-pass filter on the flux line allows for flux-biasing and, at the same time, coherently controlling the fluxonium qubit by parametrically driving it at integer fractions of its transition frequency. We compare the filtered to the unfiltered configuration and find a five times longer $T_1$, and ten times improved $T_2$-echo time in the filtered case. We demonstrate coherent control with up to 11-photon sub-harmonic drives, highlighting the strong non-linearity of the fluxonium potential. Measured Rabi frequencies and drive-induced frequency shifts show excellent agreement with numerical and analytical models. Furthermore, we show the equivalence of a 3-photon sub-harmonic drive to an on-resonance drive by benchmarking sub-harmonic gate fidelities above 99.94$\,$%. These results open up a scalable path for full qubit control through a single Purcell-protected channel, providing strong suppression of control-induced decoherence and enabling wiring-efficient superconducting quantum processors.

quant-ph↗

arXiv2025

Parity-dependent state transfer for direct entanglement generation

As quantum information technologies advance, challenges in scaling and connectivity persist, particularly the need for long-range qubit connectivity and efficient entanglement generation. Perfect State Transfer enables time-optimal state transfer between distant qubits using only nearest-neighbor couplings, enhancing device connectivity. Moreover, the transfer protocol results in effective parity-dependent non-local interactions, extending its utility to entanglement generation. Here, we experimentally demonstrate Perfect State Transfer and multi-qubit entanglement generation on a chain of six superconducting transmon qubits with tunable couplers, controlled via parametric drives. By simultaneously activating and engineering all couplings, we implement the transfer for up to six qubits, verifying single-excitation dynamics for different initial states. Extending the protocol to multiple excitations, we confirm its parity-dependent nature, where excitation number controls the phase of the transferred state. Finally, leveraging this property, we prepare a Greenberger-Horne-Zeilinger state using a single transfer operation, showcasing the potential of Perfect State Transfer for efficient entanglement generation.

quant-ph↗

arXiv2024

Sensitivity-Adapted Closed-Loop Optimization for High-Fidelity Controlled-Z Gates in Superconducting Qubits

Achieving fast and high-fidelity qubit operations is crucial for unlocking the potential of quantum computers. In particular, reaching low gate errors in two-qubit gates has been a long-standing challenge in the field of superconducting qubits due to their typically long duration relative to coherence times. To realize fast gates, we utilize the hybridization between fixed-frequency superconducting qubits with a strongly interacting coupler mode that is tunable in frequency. To reduce population leakage during required adiabatic passages through avoided level crossings, we employ a sensitivity-adaptive closed-loop optimization method to design complex pulse shapes. We compare the performance of Gaussian-square, Fourier-series, and piecewise-constant-slope (PiCoS) pulse parametrizations and are able to reach 99.9 % controlled-Z gate fidelity using a 64 ns long Fourier-series pulse defined by only seven parameters. These high-fidelity values are achieved by analyzing the optimized pulse shapes to identify and systematically mitigate signal-line distortions in the experiment. To improve the convergence speed of the optimization we implement an adaptive cost function, which continuously maximizes the sensitivity. The demonstrated method can be used for tune-up and recalibration of superconducting quantum processors.

quant-ph↗

arXiv2023

Efficient decoupling of a non-linear qubit mode from its environment

To control and measure the state of a quantum system it must necessarily be coupled to external degrees of freedom. This inevitably leads to spontaneous emission via the Purcell effect, photon-induced dephasing from measurement back-action, and errors caused by unwanted interactions with nearby quantum systems. To tackle this fundamental challenge, we make use of the design flexibility of superconducting quantum circuits to form a multi-mode element -- an artificial molecule -- with symmetry-protected modes. The proposed circuit consists of three superconducting islands coupled to a central island via Josephson junctions. It exhibits two essential non-linear modes, one of which is flux-insensitive and used as the protected qubit mode. The second mode is flux-tunable and serves via a cross-Kerr type coupling as a mediator to control the dispersive coupling of the qubit mode to the readout resonator. We demonstrate the Purcell protection of the qubit mode by measuring relaxation times that are independent of the mediated dispersive coupling. We show that the coherence of the qubit is not limited by photon-induced dephasing when detuning the mediator mode from the readout resonator and thereby reducing the dispersive coupling. The resulting highly protected qubit with tunable interactions may serve as a basic building block of a scalable quantum processor architecture, in which qubit decoherence is strongly suppressed.

quant-ph↗

arXiv2023

Wigner State and Process Tomography on Near-Term Quantum Devices

We present an experimental scanning-based tomography approach for near-term quantum devices. The underlying method has previously been introduced in an ensemble-based NMR setting. Here we provide a tutorial-style explanation along with suitable software tools to guide experimentalists in its adaptation to near-term pure-state quantum devices. The approach is based on a Wigner-type representation of quantum states and operators. These representations provide a rich visualization of quantum operators using shapes assembled from a linear combination of spherical harmonics. These shapes (called droplets in the following) can be experimentally tomographed by measuring the expectation values of rotated axial tensor operators. We present an experimental framework for implementing the scanning-based tomography technique for circuit-based quantum computers and showcase results from IBM quantum experience. We also present a method for estimating the density and process matrices from experimentally tomographed Wigner functions (droplets). This tomography approach can be directly implemented using the Python-based software package \texttt{DROPStomo}.

quant-ph↗

arXiv2023

Controlled-Controlled-Phase Gates for Superconducting Qubits Mediated by a Shared Tunable Coupler

Applications for noisy intermediate-scale quantum computing devices rely on the efficient entanglement of many qubits to reach a potential quantum advantage. Although entanglement is typically generated using two-qubit gates, direct control of strong multi-qubit interactions can improve the efficiency of the process. Here, we investigate a system of three superconducting transmon-type qubits coupled via a single flux-tunable coupler. Tuning the frequency of the coupler by adiabatic flux pulses enables us to control the conditional energy shifts between the qubits and directly realize multi-qubit interactions. To accurately adjust the resulting controlled relative phases, we describe a gate protocol involving refocusing pulses and adjustable interaction times. This enables the implementation of the full family of pairwise controlled-phase (CPHASE) and controlled-controlled-phase (CCPHASE) gates. Numerical simulations result in fidelities around 99 % and gate times below 300 ns using currently achievable system parameters and decoherence rates.

quant-ph↗

arXiv2021

Single Shot i-Toffoli Gate in Dispersively Coupled Superconducting Qubits

Quantum algorithms often benefit from the ability to execute multi-qubit (>2) gates. To date such multi-qubit gates are typically decomposed into single- and two-qubit gates, particularly in superconducting qubit architectures. The ability to perform multi-qubit operations in a single step could vastly improve the fidelity and execution time of many algorithms. Here, we propose a single shot method for executing an i-Toffoli gate, a three-qubit gate gate with two control and one target qubit, using currently existing superconducting hardware. We show numerical evidence for a process fidelity over 98% and a gate time of 500 ns for superconducting qubits interacting via tunable couplers. Our method can straight forwardly be extended to implement gates with more than two control qubits at similar fidelities.

quant-ph↗