arXiv subjects

Niklas Lettner

Publications and source records attributed to Niklas Lettner.

13 recordsLinked to original sources

arXiv2025

Tunable cavity coupling of a single SnV$^{-}$ center in nanodiamond across bad-emitter and bad-cavity regimes

Efficient coupling between quantum emitters and optical cavities is essential for scalable quantum photonic technologies. Group IV vacancy centers in diamond, particularly the negatively charged tin-vacancy center, have emerged as promising candidates due to their spectral stability, high Debye-Waller factor and large orbital splitting in ground-states. Here, we demonstrate controlled couplinag of a single negatively charged tin vacancy center hosted in a nanodiamond to a fully tunable Fabry-Perot microcavity. At cryogenic temperatures, we access the weak coupling regime and observe a transition from the bad-emitter to the bad-cavity regime as the optical transition of the color center narrows. At 4 K, a Purcell factor exceeding 1.7 is measured, confirming cavity-enhanced emission. The obtained results demonstrate the potential of SnV$^{-}$ centers in nanodiamonds as a coherent single-photon source for quantum networks.

quant-ph↗

arXiv2025

Fabrication of Customized, Low-Loss Optical Resonators by Combination of FIB-Milling and CO$_2$ Laser Ablation

Fabry-Perot cavities are essential tools for applications like precision metrology, optomechanics and quantum technologies. A major challenge is the creation of microscopic spherical mirror structures which allow the precise matching with the wavefront of a Gaussian beam, while providing high surface quality. We present a novel fabrication technique, enabling the creation of customized microscopic cavity mirror structures over a wide range of geometrical parameters, by combining focused ion beam milling (FIB) and CO$_2$ laser smoothing. While FIB milling allows us to imprint features on the mirror substrate with a resolution on the nanometer scale, the application of defocused CO$_2$ laser pulses consistently reduces remaining surface deformations down to a roughness of $\sigma_\text{RMS}=0.2\,$nm. The average deviation of the profile from a spherical shape is kept below a few nanometres. This technique enables the customized and repeatable fabrication of low loss optics on a wide range of optical substrates, including optical fibres. Thus, Fabry-Perot cavities can be fabricated with pre-defined modal volume, high finesse and tailored ellipticity. Since the structural shape of the mirror is created by FIB milling, its pixel-by-pixel nature of the writing process can be used to create arbitrary structures with a resolution given by the FIB milling. At the same time, the surface quality is given by the CO$_2$ laser smoothing processes, without degrading the FIB milled shape.

physics.optics↗

arXiv2023

Strongly Coupled Spins of Silicon-Vacancy Centers Inside a Nanodiamond with Sub-Megahertz Linewidth

The search for long-lived quantum memories, which can be efficiently interfaced with flying qubits is longstanding. One possible solution is to use the electron spin of a color center in diamond to mediate interaction between a long-lived nuclear spin and a photon. Realizing this in a nanodiamond furthermore facilitates the integration into photonic devices and enables the realization of hybrid quantum systems with access to quantum memories. Here, we investigated the spin environment of negatively-charged Silicon-Vacancy centers in a nanodiamond and demonstrate strong coupling of its electron spin, while the electron spin's decoherence rate remained below 1 MHz. We furthermore demonstrate multi-spin coupling with the potential to establish registers of quantum memories in nanodiamonds.

cond-mat.mes-hall↗

arXiv2023

Enhanced Spectral Density of a Single Germanium Vacancy Center in a Nanodiamond by Cavity-Integration

Color centers in diamond, among them the negatively-charged germanium vacancy (GeV$^-$), are promising candidates for many applications of quantum optics such as a quantum network. For efficient implementation, the optical transitions need to be coupled to a single optical mode. Here, we demonstrate the transfer of a nanodiamond containing a single ingrown GeV- center with excellent optical properties to an open Fabry-Pérot microcavity by nanomanipulation utilizing an atomic force microscope. Coupling of the GeV- defect to the cavity mode is achieved, while the optical resonator maintains a high finesse of F = 7,700 and a 48-fold spectral density enhancement is observed. This article demonstrates the integration of a GeV- defect with a Fabry-Pérot microcavity under ambient conditions with the potential to extend the experiments to cryogenic temperatures towards an efficient spin-photon platform.

physics.optics↗

arXiv2023

Controlling all Degrees of Freedom of the Optical Coupling in Hybrid Quantum Photonics

Nanophotonic quantum devices can significantly boost light-matter interaction which is important for applications such as quantum networks. Reaching a high interaction strength between an optical transition of a spin system and a single mode of light is an essential step which demands precise control over all degrees of freedom of the optical coupling. While current devices have reached a high accuracy of emitter positioning, the placement process remains overall statistically, reducing the device fabrication yield. Furthermore, not all degrees of freedom of the optical coupling can be controlled limiting the device performance. Here, we develop a hybrid approach based on negatively-charged silicon-vacancy center in nanodiamonds coupled to a mode of a Si$_3$N$_4$-photonic crystal cavity, where all terms of the coupling strength can be controlled individually. We use the frequency of coherent Rabi-oscillations and line-broadening as a measure of the device performance. This allows for iterative optimization of the position and the rotation of the dipole with respect to individual, preselected modes of light. Therefore, our work marks an important step for optimization of hybrid quantum photonics and enables to align device simulations with real device performance.

quant-ph↗

arXiv2023

All-Optical Spin Initialization via a Cavity Broadened Optical Transition in On-Chip Hybrid Quantum Photonics

Hybrid quantum photonic systems connect classical photonics to the quantum world and promise to deliver efficient light-matter quantum interfaces while leveraging the advantages of both, the classical and the quantum, subsystems. However, combining efficient, scalable photonics and solid state quantum systems with desirable optical and spin properties remains a formidable challenge. In particular the access to individual spin states and coherent mapping to photons remains unsolved for these systems. In this letter, we demonstrate all-optical initialization and readout of the electronic spin of a negatively-charged silicon-vacancy center in a nanodiamond coupled to a silicon nitride photonic crystal cavity. We characterize relevant parameters of the coupled emitter-cavity system and determine the silicon-vacancy center's spin-relaxation and spin-decoherence rate. Our results mark an important step towards the realization of a hybrid spin-photon interface based on silicon nitride photonics and the silicon-vacancy center's electron spin in nanodiamonds with potential use for quantum networks, quantum communication and distributed quantum computation.

quant-ph↗

arXiv2023

Room Temperature Fiber-Coupled single-photon devices based on Colloidal Quantum Dots and SiV centers in Back Excited Nanoantennas

We demonstrate an important step towards on chip integration of single photon sources operating at room temperature fiber coupling of a directional quantum emitter with back-excitation. Directionality is achieved with a hybrid metal-dielectric bullseye antenna, while back-excitation is permitted by placement of the emitter at or in a sub-wavelength hole positioned at the bullseye center. Overall, the unique design enables a direct laser excitation from the back of the on-chip device and very efficient coupling of the highly collimated photon emission to either low numerical aperture (NA) free space optics or directly to an optical fiber from the front. To show the versatility of the concept, we fabricate devices containing either a colloidal quantum dot or a silicon-vacancy center containing nanodiamond, which are accurately coupled to the nano-antenna using two different nano-positioning methods. Both back-excited devices display front collection efficiencies of about 70 % at NAs as low as 0.5. Moreover, the combination of back-excitation with forward low-NA directionality enables direct coupling of the emitted photons into a proximal optical fiber without the need of any coupling optics, thereby facilitating and greatly simplifying future integration.

physics.optics↗

arXiv2022

A Quantum Repeater Platform based on Single SiV$^-$ Centers in Diamond with Cavity-Assisted, All-Optical Spin Access and Fast Coherent Driving

Quantum key distribution enables secure communication based on the principles of quantum mechanics. The distance in fiber-based quantum communication is limited to about a hundred kilometers due to signal attenuation. Thus, quantum repeaters are required to establish large-scale quantum networks. Ideal quantum repeater nodes possess a quantum memory which is efficiently connected to photons, the carrier of quantum information. Color centers in diamond and, in particular, the negatively-charged silicon-vacancy centers are promising candidates to establish such nodes. The major obstacle is an inefficient connection between the color centers spin to the Gaussian optics of fiber networks. Here, we present an efficient spin-photon interface. Individual silicon-vacancy centers coupled to the mode of a hemispherical Fabry-Pérot microcavity show Purcell-factors larger than 1 when operated in a bath of liquid Helium. We demonstrate coherent optical driving with a Rabi frequency of $290\,\mathrm{MHz}$ and all-optical access to the electron spin in strong magnetic fields of up to $3.2\,\mathrm{T}$. Spin initialization within $67\,\mathrm{ns}$ with a fidelity of $80\,\%$ and a lifetime of $350\,\mathrm{ns}$ are reached inside the cavity. The spin-photon interface is passively stable, enabled by placing a color center containing nanodiamond in the hemispherical Fabry-Pérot mirror structure and by choosing short cavity lengths. Therefore, our demonstration opens the way to realize quantum repeater applications.

quant-ph↗

arXiv2022

Hybrid Quantum Nanophotonics: Interfacing Color Center in Nanodiamonds with Si3N4-Photonics

This chapter covers recent developments in the field of hybrid quantum photonics based on color centers in nanodiamonds and Si3N4-photonics towards a technology platform with applications in quantum information processing and quantum information distribution. The methodological approach can be divided in three main tasks. First, the fabrication and optimization of Si3N4-photonics. Second, the creation, characterization and control of color centers in nanodiamonds. Third, the assembly of hybrid quantum photonics by integrating the nanodiamonds into the photonic structures. One focus will be the efficient interfacing of the color centers done by optimizing the optical coupling. The chapter describes recent progress in all three steps and summarizes the established hybrid platform. We believe, that the hybrid approach provides a promising path to realize quantum photonic applications, such as quantum networks or quantum repeaters, in the near future.

quant-ph↗

arXiv2021

A Robust Coherent Single-Photon Interface for Moderate- NA Optics Based on SiV Center in Nanodiamonds and a Plasmonic Bullseye Antenna

Coherent exchange of single photons is at the heart of applied Quantum Optics. The negatively-charged silicon vacancy center in diamond is among most promising sources for coherent single photons. Its large Debye-Waller factor, short lifetime and extraordinary spectral stability is unique in the field of solid-state single photon sources. However, the excitation and detection of individual centers requires high numerical aperture optics which, combined with the need for cryogenic temperatures, puts technical overhead on experimental realizations. Here, we investigate a hybrid quantum photonics platform based on silicon-vacancy center in nanodiamonds and metallic bullseye antenna to realize a coherent single-photon interface that operates efficiently down to low numerical aperture optics with an inherent resistance to misalignment.

physics.optics↗

arXiv2021

Single photon randomness originating from the symmetry of dipole emission and the unpredictability of spontaneous emission

Quantum random number generation is a key ingredient for quantum cryptography and fundamental quantum optics and could advance Monte-Carlo simulations and machine learning. An established generation scheme is based on single photons impinging on a beam splitter. Here, we experimentally demonstrate quantum random number generation solely based on the spontaneous emission process in combination with the symmetric emission profile of a dipole aligned orthogonal to the laboratory frame. The demonstration builds on defect centers in hexagonal boron nitride and benefits from the ability to manipulate and align the emission directionality. We prove the randomness in the correlated photon detection events making use of the NIST randomness test suite and show that the randomness remains for two independently emitting defect centers. The scheme can be extended to random number generation by coherent single photons with potential applications in solid-state based quantum communication at room temperature.

quant-ph↗

arXiv2021

Hybrid quantum photonics based on artificial atoms placed inside one hole of a photonic crystal cavity

Spin-based quantum photonics promise to realize distributed quantum computing and quantum networks. The performance depends on efficient entanglement distribution, where the efficiency can be boosted by means of cavity quantum electrodynamics. The central challenge is the development of compact devices with large spin-photon coupling rates and high operation bandwidth. Photonic crystal cavities comprise strong field confinement but put high demands on accurate positioning of an atomic system in the mode field maximum. Color center in diamond, and in particular the negatively-charged Silicon-Vacancy center, emerged as a promising atom-like systems. Large spectral stability and access to long-lived, nuclear spin memories enabled elementary demonstrations of quantum network nodes including memory-enhanced quantum communication. In a hybrid approach, we deterministically place SiV$^-$-containing nanodiamonds inside one hole of a one-dimensional, free-standing, Si$_3$N$_4$-based photonic crystal cavity and coherently couple individual optical transitions to the cavity mode. We optimize the light-matter coupling by utilizing two-mode composition, waveguiding, Purcell-enhancement and cavity resonance tuning. The resulting photon flux is increased by more than a factor of 14 as compared to free-space. The corresponding lifetime shortening to below 460 ps puts the potential operation bandwidth beyond GHz rates. Our results mark an important step to realize quantum network nodes based on hybrid quantum photonics with SiV$^-$- center in nanodiamonds.

cond-mat.mtrl-sci↗

arXiv2020

Purcell-Enhanced Emission from Individual SiV$^-$ Center in Nanodiamonds Coupled to a Si$_3$N$_4$-Based, Photonic Crystal Cavity

Hybrid quantum photonics combines classical photonics with quantum emitters in a postprocessing step. It facilitates to link ideal quantum light sources to optimized photonic platforms. Optical cavities enable to harness the Purcell-effect boosting the device efficiency. Here, we postprocess a free-standing, crossed-waveguide photonic crystal cavity based on Si$_3$N$_4$ with SiV$^-$ center in nanodiamonds. We develop a routine that holds the capability to optimize all degrees of freedom of the evanescent coupling term utilizing AFM nanomanipulation. After a few optimization cycles we resolve the fine-structure of individual SiV$^-$ centers and achieve a Purcell enhancement of more than 4 on individual optical transitions, meaning that four out of five spontaneously emitted photons are channeled into the photonic device. Our work opens up new avenues to construct efficient quantum photonic devices.

cond-mat.mtrl-sci↗