arXiv subjects

Nikolay G. Pavlov

Publications and source records attributed to Nikolay G. Pavlov.

5 recordsLinked to original sources

arXiv2026

Unlocking the O-Band: high-power, broadband soliton microcomb

The O-band (1260-1360 nm), located near the minimum of chromatic dispersion of standard single-mode fiber, is the transmission window of major interest and importance for short-reach data-center interconnects. However, full capacity offered by this spectral band is yet to be unlocked, due to limited availability of scalable multi-wavelength, high-power, low noise O-band light engines. While Kerr microcombs in CMOS-compatible silicon nitride resonators provide mutually coherent wavelength channels with precise spacing and chip-scale footprints, their practical deployment in the O-band has been hindered by limited pump laser power, insufficient per-line power and the lack of flat, wideband amplification technologies to uniformly boost multiple coherent carriers. Here we demonstrate a high-power O-band soliton microcomb architecture that overcomes this bottleneck by combining self-injection-locked (SIL) operation in a Silicon Nitride microring with a single-stage bismuth-doped phosphosilicate fiber amplifier designed for wideband, flat-top gain. The SIL microcomb operates with an 834 GHz free spectral range and spans over 1050-1650 nm. The amplifier simultaneously boosts 21 O-band lines across 100 nm to powers exceeding 0 dBm per carrier without gain flattening or external equalization, while preserving low-noise characteristics. We validate each amplified microcomb line as a carrier across the entire O-band using dual-polarization 32 GBaud 64-QAM coherent transmission. This approach establishes a practical route towards high-power, broadband O-band microcomb engines for next-generation data-center interconnects and scalable photonic systems.

physics.optics↗

arXiv2023

Synthetic-reflection self-injection-locked microcombs

Laser-driven microresonators have enabled chip-integrated light sources with unique properties, including the self-organized formation of ultrashort soliton pulses and frequency combs (microcombs). While poised to impact major photonic applications, such as spectroscopy, sensing and optical data processing, microcombs still necessitate complex scientific equipment to achieve and maintain suitable single-pulse operation. Here, to address this challenge, we demonstrate microresonators with programmable synthetic reflection providing an injection-feedback to the driving laser. When designed appropriately, synthetic reflection enables deterministic access to self-injection-locked microcombs operating exclusively in the single-soliton regime. These results provide a route to easily-operable microcombs for portable sensors, autonomous navigation, or extreme-bandwidth data processing. The novel concept of synthetic reflection may also be generalized to other integrated photonic systems.

physics.optics↗

arXiv2018

Electrically pumped photonic integrated soliton microcomb

Optical frequency combs have revolutionized frequency metrology and timekeeping, and can be used in a wide range of optical technologies. Advances are under way that allow dramatic miniaturization of optical frequency combs using Kerr nonlinear optical microresonators, where broadband and coherent optical frequency combs can be generated from a continuous wave laser. Such `microcombs', provide a broad bandwidth with low power consumption, unprecedented form factor, wafer scale fabrication compatibility. For future high volume applications, integration and electrical pumping of soliton microcombs is essential. To date, however, microcombs still rely on optical pumping by bulk external laser modules that provide the required coherence, frequency agility and power levels for soliton formation. Electrically-driven, chip-integrated microcombs are inhibited by the high threshold power for soliton formation, typically exceeding the power of integrated silicon based lasers, and the required frequency agility for soliton initiation. Recent advances in high-Q Si3N4 microresonators suggest that electrically driven soliton microcombs are possible. Here we demonstrate an electrically-driven, chip-integrated soliton microcomb by coupling an indium phosphide (III-V) multiple-longitudinal-mode laser diode chip to a high-Q Si3N4 photonic integrated microresonator. We observe that self-injection locking of the laser diode to the microresonator, which is accompanied by a x1000 fold narrowing of the laser linewidth, can simultaneously initiate the formation of dissipative Kerr solitons. By tuning the current, we observe a transition from modulation instability, breather solitons to single soliton states. The system requires less than 1 Watt of electrical power, operates at electronically-detectable sub-100 GHz mode spacing and can fit in a volume of ca. 1cm3.

physics.optics↗

arXiv2018

Spatial multiplexing of soliton microcombs

Dual-comb interferometry utilizes two optical frequency combs to map the optical field's spectrum to a radio-frequency signal without using moving parts, allowing improved speed and accuracy. However, the method is compounded by the complexity and demanding stability associated with operating multiple laser frequency combs. To overcome these challenges, we demonstrate simultaneous generation of multiple frequency combs from a single optical microresonator and a single continuous-wave laser. Similar to space-division multiplexing, we generate several dissipative Kerr soliton states - circulating solitonic pulses driven by a continuous-wave laser - in different spatial (or polarization) modes of a $\mathrm{MgF_2}$ microresonator. Up to three distinct combs are produced simultaneously, featuring excellent mutual coherence and substantial repetition rate differences, useful for fast acquisition and efficient rejection of soliton intermodulation products. Dual-comb spectroscopy with amplitude and phase retrieval, as well as optical sampling of a breathing soliton, is realised with the free-running system. Compatibility with photonic-integrated resonators could enable the deployment of dual- and triple-comb-based methods to applications where they remained impractical with current technology.

physics.optics↗

arXiv2015

Nonlinear Absorption of Radio Waves in a Noncollinear Antiferromagnet

The nonlinear absorption of radio waves (200 - 800 MHz) in a noncollinear cubic antiferromagnet Mn3Al2Ge3O12 in an external magnetic field H || [001] has been studied in the temperature range of 1.2 - 4.2 K. We attribute the observed dissipation of the electromagnetic energy to the parametric excitation of inhomogeneous surface waves at the boundaries of antiferromagnetic domains.

cond-mat.mtrl-sci↗