arXiv subjects

Ning Wei

Publications and source records attributed to Ning Wei.

At least 55 records · Page 3Linked to original sources

arXiv2022

Joint Localization and Beamforming for Reconfigurable Intelligent Surface Aided 5G mmWave Communication Systems

Reconfigurable intelligent surface (RIS) is an attractive technology to improve the transmission rate of millimetre-wave (mmWave) communication systems. The previous {research} on RIS technology mainly focused on improving the transmission rate and security rate of the mmWave communication systems. Since the emergence of RIS technology creates the conditions for generating an intelligent radio environment, it also has potential advantages on improving the localization accuracy of the mmWave communication systems. Deployed on walls and objects, RISs are capable of significantly improving communications and positioning coverage by controlling the multi-path reflection. This paper considers the RIS-aided mmWave localization system and proposes a joint beamforming and localization problem. However, since the objective function depends on the unknown UE's position and instantaneous channel state information (CSI), this beamforming and localization technology based on RIS assistance is challenging. To solve this problem, we propose a new joint localization and beamforming optimization (JLBO) algorithm, and give the proof of its convergence. The simulation results show that the RIS can improve the user localization accuracy of the system and the proposed scheme has a significant performance improvement compared with the traditional schemes.

eess.SP↗

arXiv2022

Preliminary Analysis of Channel Capacity in Air to ground LoS MIMO Communication Based on A Cloud Modeling Method

Since the orthogonality of the line-of-sight multiple input multiple output (LoS MIMO) channel is only available within the Rayleigh distance, coverage of communication systems is restricted due to the finite implementation spacing of antennas. However, media with different permittivity in the transmission path are likely to loosen the requirement for antenna spacing. Such a conclusion could be enlightening in an air-to-ground LoS MIMO scenario considering the existence of clouds in the troposphere. To analyze the random phase variations in the presence of a single-layer cloud, we propose and modify a new cloud modeling method fit for LoS MIMO scene based on real-measurement data. Then, the preliminary analysis of channel capacity is conducted based on the simulation result.

cs.IT↗

arXiv2022

Secondary complementary balancing compressive imaging with a free-space balanced amplified photodetector

Single-pixel imaging (SPI) has attracted widespread attention because it generally uses a non-pixelated photodetector and a digital micromirror device (DMD) to acquire the object image. Since the modulated patterns seen from two reflection directions of the DMD are naturally complementary, one can apply complementary balanced measurements to greatly improve the measurement signal-to-noise ratio and reconstruction quality. However, the balance between two reflection arms significantly determines the quality of differential measurements. In this work, we propose and demonstrate a simple secondary complementary balancing mechanism to minimize the impact of the imbalance on the imaging system. In our SPI setup, we used a silicon free-space balanced amplified photodetector with 5 mm active diameter which could directly output the difference between two optical input signals in two reflection arms. Both simulation and experimental results have demonstrated that the use of secondary complementary balancing can result in a better cancellation of direct current components of measurements and a better image restoration quality.

physics.optics↗

arXiv2022

Single-pixel imaging based on weight sort of the Hadamard basis

Single-pixel imaging (SPI) is very popular in subsampling applications, but the random measurement matrices it typically uses will lead to measurement blindness as well as difficulties in calculation and storage, and will also limit the further reduction in sampling rate. The deterministic Hadamard basis has become an alternative choice due to its orthogonality and structural characteristics. There is evidence that sorting the Hadamard basis is beneficial to further reduce the sampling rate, thus many orderings have emerged, but their relations remain unclear and lack a unified theory. Given this, here we specially propose a concept named selection history, which can record the Hadamard spatial folding process, and build a model based on it to reveal the formation mechanisms of different orderings and to deduce the mutual conversion relationship among them. Then, a weight ordering of the Hadamard basis is proposed. Both numerical simulation and experimental results have demonstrated that with this weight sort technique, the sampling rate, reconstruction time and matrix memory consumption are greatly reduced in comparison to traditional sorting methods. Therefore, we believe that this method may pave the way for real-time single-pixel imaging.

eess.IV↗

arXiv2021

Spectral and Energy Efficiency of Multicell Massive MIMO With Variable-Resolution ADCs Over Correlated Rayleigh Fading Channels

This paper analyzes the performance of multicell massive multiple-input and multiple-output (MIMO) systems with variable-resolution analog-to-digital converters (ADCs). In such an architecture, each ADC uses arbitrary quantization resolution to save power and hardware cost. Along this direction, we first introduce a quantization-aware channel estimator based on additive quantization noise model (AQNM) and linear minimum mean-squared error (LMMSE) estimate theory. Afterwards, by leveraging on the estimated channel state information (CSI), we derive the asymptotic expressions of achievable uplink spectral efficiency (SE) over spatially correlated Rayleigh fading channels for maximal ratio combining (MRC), quantization-aware multicell minimum mean-squared error (QA-M-MMSE) combining, and quantization-aware single-cell MMSE (QA-S-MMSE) combining, respectively. During the derivations, we consider the effect of quantization errors and resort to random matrix theory to achieve the asymptotic results. Finally, simulation results demonstrate that our theoretical analyses are correct and that the proposed quantization-aware estimator and combiners are more beneficial than the quantization-unaware counterparts. Besides, based on a generic power consumption model, it is shown that low-resolution ADCs can obtain the best tradeoff between SE and energy efficiency (EE) under multicell scenarios.

cs.IT↗

arXiv2021

Hindsight Reward Tweaking via Conditional Deep Reinforcement Learning

Designing optimal reward functions has been desired but extremely difficult in reinforcement learning (RL). When it comes to modern complex tasks, sophisticated reward functions are widely used to simplify policy learning yet even a tiny adjustment on them is expensive to evaluate due to the drastically increasing cost of training. To this end, we propose a hindsight reward tweaking approach by designing a novel paradigm for deep reinforcement learning to model the influences of reward functions within a near-optimal space. We simply extend the input observation with a condition vector linearly correlated with the effective environment reward parameters and train the model in a conventional manner except for randomizing reward configurations, obtaining a hyper-policy whose characteristics are sensitively regulated over the condition space. We demonstrate the feasibility of this approach and study one of its potential application in policy performance boosting with multiple MuJoCo tasks.

cs.LG↗

arXiv2021

Sum-Rate Maximization in Distributed Intelligent Reflecting Surfaces-Aided mmWave Communications

In this paper, we focus on the sum-rate optimization in a multi-user millimeter-wave (mmWave) system with distributed intelligent reflecting surfaces (D-IRSs), where a base station (BS) communicates with users via multiple IRSs. The BS transmit beamforming, IRS switch vector, and phase shifts of the IRS are jointly optimized to maximize the sum-rate under minimum user rate, unit-modulus, and transmit power constraints. To solve the resulting non-convex optimization problem, we develop an efficient alternating optimization (AO) algorithm. Specifically, the non-convex problem is converted into three subproblems, which are solved alternatively. The solution to transmit beamforming at the BS and the phase shifts at the IRS are derived by using the successive convex approximation (SCA)-based algorithm, and a greedy algorithm is proposed to design the IRS switch vector. The complexity of the proposed AO algorithm is analyzed theoretically. Numerical results show that the D-IRSs-aided scheme can significantly improve the sum-rate and energy efficiency performance.

eess.SP↗

arXiv2020

IRS-Assisted Millimeter Wave Communications: Joint Power Allocation and Beamforming Design

Intelligent reflecting surface (IRS) technology offers more feasible propagation paths for millimeter-wave (mmWave) communication systems to overcome blockage than existing technologies. In this paper, we consider a downlink wireless system with the IRS and formulate a joint power allocation and beamforming design problem to maximize the weighted sum-rate, which is a multi-variable optimization problem. To solve the problem, we propose a novel alternating manifold optimization based beamforming algorithm. Simulation results show that our proposed optimization algorithm outperforms existing algorithms significantly in improving the weighted sum-rate of the wireless communication system.

eess.SP↗

arXiv2020

Uplink Achievable Rate Maximization for Reconfigurable Intelligent Surface Aided Millimeter Wave Systems with Resolution-Adaptive ADCs

In this letter, we investigate the uplink of a reconfigurable intelligent surface (RIS)-aided millimeter-wave (mmWave) multi-user system. In the considered system, however, problems with hardware cost and power consumption arise when massive antenna arrays coupled with power-demanding analog-to-digital converters (ADCs) are employed. To account for practical hardware complexity, we consider that the access point (AP) is equipped with resolution-adaptive analog-to-digital converters (RADCs). We maximize the achievable rate under hardware constraints by jointly optimizing the ADC quantization bits, the RIS phase shifts, and the beam selection matrix. Due to the non-convexity of the feasible set and objective function, the formulated problem is non-convex and difficult to solve. To efficiently tackle this problem, a block coordinated descent (BCD)-based algorithm is proposed. Simulations demonstrate that an RIS can mitigate the hardware loss due to use of RADCs, and that the proposed BCD-based algorithm outperforms state-of-the-art algorithms.

eess.SP↗

arXiv2020

Reconfigurable Intelligent Surfaces Aided mmWave NOMA: Joint Power Allocation,Phase Shifts, and Hybrid Beamforming Optimization

In this paper, an reconfigurable intelligent surface (RIS)-aided millimeter wave (mmWave) non-orthogonal multiple access (NOMA) system is considered. In particular, we consider an RIS-aided mmWave-NOMA downlink system with a hybrid beamforming structure. To maximize the achievable sum-rate under a minimum rate constraint for the users and a minimum transmit power constraint, a joint RIS phase shifts, hybrid beamforming, and power allocation problem is formulated. To solve this non-convex optimization problem, we develop an alternating optimization algorithm. Specifically, first, the non-convex problem is transformed into three subproblems, i.e., power allocation, joint phase shifts and analog beamforming optimization, and digital beamforming design. Then, we solve the power allocation problem under fixed phase shifts of the RIS and hybrid beamforming. Finally, given the power allocation matrix, an alternating manifold optimization (AMO)-based method and a successive convex approximation (SCA)-based method are utilized to design the phase shifts, analog beamforming, and transmit beamforming, respectively. Numerical results reveal that the proposed alternating optimization algorithm outperforms state-of-the-art schemes in terms of sum-rate. Moreover, compared to a conventional mmWave-NOMA system without RIS, the proposed RIS-aided mmWave-NOMA system is capable of improving the achievable sum-rate of the system.

eess.SP↗

arXiv2019

Beam Allocation for Millimeter-Wave MIMO Tracking Systems

In this paper, we propose a new beam allocation strategy aiming to maximize the average successful tracking probability (ASTP) of time-varying millimeter-wave MIMO systems. In contrast to most existing works that employ one transmitting-receiving (Tx-Rx) beam pair once only in each training period, we investigate a more general framework, where the Tx-Rx beam pairs are allowed to be used repeatedly to improve the received signal powers in specific directions. In the case of orthogonal Tx-Rx beam pairs, a power-based estimator is employed to track the time-varying AoA and AoD of the channel, and the resulting training beam pair sequence design problem is formulated as an integer nonlinear programming (I-NLP) problem. By dividing the feasible region into a set of subregions, the formulated I-NLP is decomposed into a series of concave sub I-NLPs, which can be solved by recursively invoking a nonlinear branch-and-bound algorithm. To reduce the computational cost, we relax the integer constraints of each sub I-NLP and obtain a low-complexity solution via solving the Karush-Kuhn-Tucker conditions of their relaxed problems. For the case when the Tx-Rx beam pairs are overlapped in the angular space, we estimate the updated AoA and AoD via an orthogonal matching pursuit (OMP) algorithm. Moreover, since no explicit expression for the ASTP exists for the OMP-based estimator, we derive a closed-form lower bound of the ASTP, based on which a favorable beam pair allocation strategy can be obtained. Numerical results demonstrate the superiority of the proposed beam allocation strategy over existing benchmarks.

eess.SP↗

arXiv2019

Influence of Boundaries and Thermostatting on Nonequilibrium Molecular Dynamics Simulations of Heat Conduction in Solids

Nonequilibrium molecular dynamics (NEMD) has been extensively used to study thermal transport at various length scales in many materials. In this method, two local thermostats at different temperatures are used to generate a nonequilibrium steady state with a constant heat flux. Conventionally, the thermal conductivity of a finite system is calculated as the ratio between the heat flux and the temperature gradient extracted from the linear part of the temperature profile away from the local thermostats. Here we show that, with a proper choice of the thermostat, the nonlinear part of the temperature profile should actually not be excluded in thermal transport calculations. We compare NEMD results against those from the atomistic Green's function method in the ballistic regime, and those from the homogeneous nonequilibrium molecular dynamics method in the ballistic-to-diffusive regime. These comparisons suggest that in all the transport regimes, one should directly calculate the thermal conductance from the temperature difference between the heat source and sink and, if needed, convert it to the thermal conductivity by multiplying it with the system length. Furthermore, we find that the Langevin thermostat outperforms the Nosé-Hoover (chain) thermostat in NEMD simulations because of its stochastic and local nature. We show that this is particularly important for studying asymmetric carbon-based nanostructures, for which the Nosé-Hoover thermostat can produce artifacts leading to unphysical thermal rectification. Our findings are important to obtain correct results from molecular dynamics simulations of nanoscale heat transport as the accuracy of the interatomic potentials is rapidly improving.

cond-mat.mes-hall↗

arXiv2019

An Optimal Stopping Approach to Cell Selection in 5G Networks

Initial cell search and selection is one of the first few essential steps that a mobile device must perform to access a mobile network. The distinct features of 5G bring new challenges to the design of initial cell search and selection. In this paper, we propose a load-aware initial cell search and selection scheme for 5G networks. The proposed scheme augments the existing pure received power based scheme by incorporating a new load factor broadcast as part of system information. We then formulate a throughput optimization problem using the optimal stopping theory. We characterize the throughput optimal stopping strategy and the attained maximum throughput. The results show that the proposed cell search and selection scheme is throughput optimal with a carefully optimized connection threshold.

cs.NI↗

arXiv2018

Thermal Transport in MoS$_2$ from Molecular Dynamics using Different Empirical Potentials

Thermal properties of molybdenum disulfide (MoS$_2$) have recently attracted attention related to fundamentals of heat propagation in strongly anisotropic materials, and in the context of potential applications to optoelectronics and thermoelectrics. Multiple empirical potentials have been developed for classical molecular dynamics (MD) simulations of this material, but it has been unclear which provides the most realistic results. Here, we calculate lattice thermal conductivity of single- and multi-layer pristine MoS$_2$ by employing three different thermal transport MD methods: equilibrium, nonequilibrium, and homogeneous nonequilibrium ones. These methods allow us to verify the consistency of our results and also facilitate comparisons with previous works, where different schemes have been adopted. Our results using variants of the Stillinger-Weber potential are at odds with some previous ones and we analyze the possible origins of the discrepancies in detail. We show that, among the potentials considered here, the reactive empirical bond order (REBO) potential gives the most reasonable predictions of thermal transport properties as compared to experimental data. With the REBO potential, we further find that isotope scattering has only a small effect on thermal conduction in MoS$_2$ and the in-plane thermal conductivity decreases with increasing layer number and saturates beyond about three layers. We identify the REBO potential as a transferable empirical potential for MD simulations of MoS$_2$ which can be used to study thermal transport properties in more complicated situations such as in systems containing defects or engineered nanoscale features. This work establishes a firm foundation for understanding heat transport properties of MoS$_2$ using MD simulations.

cond-mat.mtrl-sci↗

arXiv2018

Thermal transport properties of single-layer black phosphorous from extensive molecular dynamics simulations

We compute the anisotropic in-plane thermal conductivity of suspended single-layer black phosphorous (SLBP) using three molecular dynamics (MD) based methods, including the equilibrium MD method, the nonequilibrium MD (NEMD) method, and the homogeneous nonequilibrium MD (HNEMD) method. Two existing parameterizations of the Stillinger-Weber (SW) potential for SLBP are used. Consistent results are obtained for all the three methods and conflicting results from previous MD simulations are critically assessed. Among the three methods, the HNEMD method is the most and the NEMD method the least efficient. The thermal conductivity values from our MD simulations are about an order of magnitude larger than the most recent predictions obtained using the Boltzmann transport equation approach considering long-range interactions in density functional theory calculations, suggesting that the short-range SW potential might be inadequate for describing the phonon anharmonicity in SLBP.

cond-mat.mtrl-sci↗

arXiv2017

Molecular Dynamics Simulations for Anisotropic Thermal Conductivity of Borophene

The present work carries out molecular dynamics simulations to compute the thermal conductivity of the borophene nanoribbon and the borophene nanotube using the Muller-Plathe approach. We investigate the thermal conductivity of the armchair and zigzag borophenes, and show the strong anisotropic thermal conductivity property of borophene. We compare the results of the borophene nanoribbon and the borophene nanotube, and find the thermal conductivity of the borophene is structure dependent.

physics.comp-ph↗

arXiv2016

Interfacial thermal conductance in graphene/black phosphorus heterogeneous structures

Graphene, as a passivation layer, can be used to protect the black phosphorus from the chemical reaction with surrounding oxygen and water. However, black phosphorus and graphene heterostructures have low efficiency of heat dissipation due to its intrinsic high thermal resistance at the interfaces. The accumulated energy from Joule heat has to be removed efficiently to avoid the malfunction of the devices. Therefore, it is of significance to investigate the interfacial thermal dissipation properties and manipulate the properties by interfacial engineering on demand. In this work, the interfacial thermal conductance between few-layer black phosphorus and graphene is studied extensively using molecular dynamics simulations. Two critical parameters, the critical power Pcr to maintain thermal stability and the maximum heat power density Pmax with which the system can be loaded, are identified. Our results show that interfacial thermal conductance can be effectively tuned in a wide range with external strains and interracial defects. The compressive strain can enhance the interfacial thermal conductance by one order of magnitude, while interface defects give a two-fold increase. These findings could provide guidelines in heat dissipation and interfacial engineering for thermal conductance manipulation of black phosphorus-graphene heterostructure-based devices.

cond-mat.mtrl-sci↗

arXiv2016

Throughput Optimal Listen-Before-Talk for Cellular in Unlicensed Spectrum

The effort to extend cellular technologies to unlicensed spectrum has been gaining high momentum. Listen-before-talk (LBT) is enforced in the regions such as European Union and Japan to harmonize coexistence of cellular and incumbent systems in unlicensed spectrum. In this paper, we study throughput optimal LBT transmission strategy for load based equipment (LBE). We find that the optimal rule is a pure threshold policy: The LBE should stop listening and transmit once the channel quality exceeds an optimized threshold. We also reveal the optimal set of LBT parameters that are compliant with regulatory requirements. Our results shed light on how the regulatory LBT requirements can affect the transmission strategies of radio equipment in unlicensed spectrum.

cs.IT↗