Reduced integration with scaled boundary parametrization for virtual elements at finite strains
This contribution presents an alternative stabilization technique for the virtual element method (VEM) based on reduced integration combined with a scaled boundary parametrization. To this end, a Taylor series expansion of the constitutive quantities with respect to the sectional center is carried out, enabling analytical integration of the weak form and reducing the need for integration points to only one per section. The accuracy of the proposed formulation is shown by several numerical examples, including a non-linear patch test. Different loading, e.g. compression under large deformations, and material conditions, such as hyperelastic anisotropy and elasto-plasticity, are considered. The biquadratic serendipity finite element formulation (Q2) and the low-order finite element formulation with hourglass stabilization (Q1STc+) are used for comparison. While the patch test was not fulfilled using higher order shape functions, the formulation led to good results and was able to capture the structure's response accurately. Furthermore, the formulation performed better when the physical element resembled the pre-assigned parent elements. The example of the asymmetrically notched specimen under elasto-plastic material behavior showed that the proposed formulation is able to capture inelasticities.