arXiv subjects

Noel Cressie

Publications and source records attributed to Noel Cressie.

31 records · Page 2Linked to original sources

arXiv2020

Bayesian Inference of Spatio-Temporal Changes of Arctic Sea Ice

Arctic sea ice extent has drawn increasing interest and alarm from geoscientists, owing to its rapid decline. In this article, we propose a Bayesian spatio-temporal hierarchical statistical model for binary Arctic sea ice data over two decades, where a latent dynamic spatio-temporal Gaussian process is used to model the data-dependence through a logit link function. Our ultimate goal is to perform inference on the dynamic spatial behavior of Arctic sea ice over a period of two decades. Physically motivated covariates are assessed using autologistic diagnostics. Our Bayesian spatio-temporal model shows how parameter uncertainty in such a complex hierarchical model can influence spatio-temporal prediction. The posterior distributions of new summary statistics are proposed to detect the changing patterns of Arctic sea ice over two decades since 1997.

stat.AP↗

arXiv2018

A hierarchical statistical framework for emergent constraints: application to snow-albedo feedback

Emergent constraints use relationships between future and current climate states to constrain projections of climate response. Here, we introduce a statistical, hierarchical emergent constraint (HEC) framework in order to link future and current climate with observations. Under Gaussian assumptions, the mean and variance of the future state is shown analytically to be a function of the signal-to-noise (SNR) ratio between data-model error and current-climate uncertainty, and the correlation between future and current climate states. We apply the HEC to the climate-change, snow-albedo feedback, which is related to the seasonal cycle in the Northern Hemisphere. We obtain a snow-albedo-feedback prediction interval of $(-1.25, -0.58)$ \%$K^{-1}$. The critical dependence on SNR and correlation shows that neglecting these terms can lead to bias and under-estimated uncertainty in constrained projections. The flexibility of using HEC under general assumptions throughout the Earth System is discussed.

physics.ao-ph↗

arXiv2018

FRK: An R Package for Spatial and Spatio-Temporal Prediction with Large Datasets

FRK is an R software package for spatial/spatio-temporal modelling and prediction with large datasets. It facilitates optimal spatial prediction (kriging) on the most commonly used manifolds (in Euclidean space and on the surface of the sphere), for both spatial and spatio-temporal fields. It differs from many of the packages for spatial modelling and prediction by avoiding stationary and isotropic covariance and variogram models, instead constructing a spatial random effects (SRE) model on a fine-resolution discretised spatial domain. The discrete element is known as a basic areal unit (BAU), whose introduction in the software leads to several practical advantages. The software can be used to (i) integrate multiple observations with different supports with relative ease; (ii) obtain exact predictions at millions of prediction locations (without conditional simulation); and (iii) distinguish between measurement error and fine-scale variation at the resolution of the BAU, thereby allowing for reliable uncertainty quantification. The temporal component is included by adding another dimension. A key component of the SRE model is the specification of spatial or spatio-temporal basis functions; in the package, they can be generated automatically or by the user. The package also offers automatic BAU construction, an expectation-maximisation (EM) algorithm for parameter estimation, and functionality for prediction over any user-specified polygons or BAUs. Use of the package is illustrated on several spatial and spatio-temporal datasets, and its predictions and the model it implements are extensively compared to others commonly used for spatial prediction and modelling.

stat.CO↗

arXiv2018

On statistical approaches to generate Level 3 products from satellite remote sensing retrievals

Satellite remote sensing of trace gases such as carbon dioxide (CO$_2$) has increased our ability to observe and understand Earth's climate. However, these remote sensing data, specifically~Level 2 retrievals, tend to be irregular in space and time, and hence, spatio-temporal prediction is required to infer values at any location and time point. Such inferences are not only required to answer important questions about our climate, but they are also needed for validating the satellite instrument, since Level 2 retrievals are generally not co-located with ground-based remote sensing instruments. Here, we discuss statistical approaches to construct Level 3 products from Level 2 retrievals, placing particular emphasis on the strengths and potential pitfalls when using statistical prediction in this context. Following this discussion, we use a spatio-temporal statistical modelling framework known as fixed rank kriging (FRK) to obtain global predictions and prediction standard errors of column-averaged carbon dioxide based on Version 7r and Version 8r retrievals from the Orbiting Carbon Observatory-2 (OCO-2) satellite. The FRK predictions allow us to validate statistically the Level 2 retrievals globally even though the data are at locations and at time points that do not coincide with validation data. Importantly, the validation takes into account the prediction uncertainty, which is dependent both on the temporally-varying density of observations around the ground-based measurement sites and on the spatio-temporal high-frequency components of the trace gas field that are not explicitly modelled. Here, for validation of remotely-sensed CO$_2$ data, we use observations from the Total Carbon Column Observing Network. We demonstrate that the resulting FRK product based on Version 8r compares better with TCCON data than that based on Version 7r.

stat.AP↗

arXiv2016

Multivariate Spatial Covariance Models: A Conditional Approach

Multivariate geostatistics is based on modelling all covariances between all possible combinations of two or more variables at any sets of locations in a continuously indexed domain. Multivariate spatial covariance models need to be built with care, since any covariance matrix that is derived from such a model must be nonnegative-definite. In this article, we develop a conditional approach for spatial-model construction whose validity conditions are easy to check. We start with bivariate spatial covariance models and go on to demonstrate the approach's connection to multivariate models defined by networks of spatial variables. In some circumstances, such as modelling respiratory illness conditional on air pollution, the direction of conditional dependence is clear. When it is not, the two directional models can be compared. More generally, the graph structure of the network reduces the number of possible models to compare. Model selection then amounts to finding possible causative links in the network. We demonstrate our conditional approach on surface temperature and pressure data, where the role of the two variables is seen to be asymmetric.

stat.ME↗

arXiv2016

Non-Gaussian bivariate modelling with application to atmospheric trace-gas inversion

Atmospheric trace-gas inversion is the procedure by which the sources and sinks of a trace gas are identified from observations of its mole fraction at isolated locations in space and time. This is inherently a spatio-temporal bivariate inversion problem, since the mole-fraction field evolves in space and time and the flux is also spatio-temporally distributed. Further, the bivariate model is likely to be non-Gaussian since the flux field is rarely Gaussian. Here, we use conditioning to construct a non-Gaussian bivariate model, and we describe some of its properties through auto- and cross-cumulant functions. A bivariate non-Gaussian, specifically trans-Gaussian, model is then achieved through the use of Box--Cox transformations, and we facilitate Bayesian inference by approximating the likelihood in a hierarchical framework. Trace-gas inversion, especially at high spatial resolution, is frequently highly sensitive to prior specification. Therefore, unlike conventional approaches, we assimilate trace-gas inventory information with the observational data at the parameter layer, thus shifting prior sensitivity from the inventory itself to its spatial characteristics (e.g., its spatial length scale). We demonstrate the approach in controlled-experiment studies of methane inversion, using fluxes extracted from inventories of the UK and Ireland and of Northern Australia.

stat.AP↗

arXiv2015

Spatio-temporal bivariate statistical models for atmospheric trace-gas inversion

Atmospheric trace-gas inversion refers to any technique used to predict spatial and temporal fluxes using mole-fraction measurements and atmospheric simulations obtained from computer models. Studies to date are most often of a data-assimilation flavour, which implicitly consider univariate statistical models with the flux as the variate of interest. This univariate approach typically assumes that the flux field is either a spatially correlated Gaussian process or a spatially uncorrelated non-Gaussian process with prior expectation fixed using flux inventories (e.g., NAEI or EDGAR in Europe). Here, we extend this approach in three ways. First, we develop a bivariate model for the mole-fraction field and the flux field. The bivariate approach allows optimal prediction of both the flux field and the mole-fraction field, and it leads to significant computational savings over the univariate approach. Second, we employ a lognormal spatial process for the flux field that captures both the lognormal characteristics of the flux field (when appropriate) and its spatial dependence. Third, we propose a new, geostatistical approach to incorporate the flux inventories in our updates, such that the posterior spatial distribution of the flux field is predominantly data-driven. The approach is illustrated on a case study of methane (CH$_4$) emissions in the United Kingdom and Ireland.

stat.AP↗

arXiv2015

Comment on Article by Ferreira and Gamerman

A utility-function approach to optimal spatial sampling design is a powerful way to quantify what "optimality" means. The emphasis then should be to capture all possible contributions to utility, including scientific impact and the cost of sampling. The resulting sampling plan should contain a component of designed randomness that would allow for a non-parametric design-based analysis if model-based assumptions were in doubt. [arXiv:1509.03410]

math.ST↗

arXiv2015

Capturing Multivariate Spatial Dependence: Model, Estimate and then Predict

Physical processes rarely occur in isolation, rather they influence and interact with one another. Thus, there is great benefit in modeling potential dependence between both spatial locations and different processes. It is the interaction between these two dependencies that is the focus of Genton and Kleiber's paper under discussion. We see the problem of ensuring that any multivariate spatial covariance matrix is nonnegative definite as important, but we also see it as a means to an end. That "end" is solving the scientific problem of predicting a multivariate field. [arXiv:1507.08017].

stat.ME↗

arXiv2014

A Comparison of Spatial Predictors when Datasets Could be Very Large

In this article, we review and compare a number of methods of spatial prediction. To demonstrate the breadth of available choices, we consider both traditional and more-recently-introduced spatial predictors. Specifically, in our exposition we review: traditional stationary kriging, smoothing splines, negative-exponential distance-weighting, Fixed Rank Kriging, modified predictive processes, a stochastic partial differential equation approach, and lattice kriging. This comparison is meant to provide a service to practitioners wishing to decide between spatial predictors. Hence, we provide technical material for the unfamiliar, which includes the definition and motivation for each (deterministic and stochastic) spatial predictor. We use a benchmark dataset of $\mathrm{CO}_{2}$ data from NASA's AIRS instrument to address computational efficiencies that include CPU time and memory usage. Furthermore, the predictive performance of each spatial predictor is assessed empirically using a hold-out subset of the AIRS data.

stat.ME↗

arXiv2014

Spatial Fay-Herriot Models for Small Area Estimation with Functional Covariates

The Fay-Herriot (FH) model is widely used in small area estimation and uses auxiliary information to reduce estimation variance at undersampled locations. We extend the type of covariate information used in the FH model to include functional covariates, such as social-media search loads or remote-sensing images (e.g., in crop-yield surveys). The inclusion of these functional covariates is facilitated through a two-stage dimension-reduction approach that includes a Karhunen-Loève expansion followed by stochastic search variable selection. Additionally, the importance of modeling spatial autocorrelation has recently been recognized in the FH model; our model utilizes the intrinsic conditional autoregressive class of spatial models in addition to functional covariates. We demonstrate the effectiveness of our approach through simulation and analysis of data from the American Community Survey. We use Google Trends searches over time as functional covariates to analyze relative changes in rates of percent household Spanish-speaking in the eastern half of the United States.

stat.ME↗

arXiv2012

Bayesian Learning and Predictability in a Stochastic Nonlinear Dynamical Model

Bayesian inference methods are applied within a Bayesian hierarchical modelling framework to the problems of joint state and parameter estimation, and of state forecasting. We explore and demonstrate the ideas in the context of a simple nonlinear marine biogeochemical model. A novel approach is proposed to the formulation of the stochastic process model, in which ecophysiological properties of plankton communities are represented by autoregressive stochastic processes. This approach captures the effects of changes in plankton communities over time, and it allows the incorporation of literature metadata on individual species into prior distributions for process model parameters. The approach is applied to a case study at Ocean Station Papa, using Particle Markov chain Monte Carlo computational techniques. The results suggest that, by drawing on objective prior information, it is possible to extract useful information about model state and a subset of parameters, and even to make useful long-term forecasts, based on sparse and noisy observations.

stat.AP↗

arXiv2011

A spatial analysis of multivariate output from regional climate models

Climate models have become an important tool in the study of climate and climate change, and ensemble experiments consisting of multiple climate-model runs are used in studying and quantifying the uncertainty in climate-model output. However, there are often only a limited number of model runs available for a particular experiment, and one of the statistical challenges is to characterize the distribution of the model output. To that end, we have developed a multivariate hierarchical approach, at the heart of which is a new representation of a multivariate Markov random field. This approach allows for flexible modeling of the multivariate spatial dependencies, including the cross-dependencies between variables. We demonstrate this statistical model on an ensemble arising from a regional-climate-model experiment over the western United States, and we focus on the projected change in seasonal temperature and precipitation over the next 50 years.

stat.AP↗