arXiv subjects

Nongnuch Artrith

Publications and source records attributed to Nongnuch Artrith.

32 records · Page 2Linked to original sources

arXiv2023

Ultrafast X-ray imaging of the light-induced phase transition in VO2

Using light to control transient phases in quantum materials is an emerging route to engineer new properties and functionality, with both thermal and non-thermal phases observed out of equilibrium. Transient phases are expected to be heterogeneous, either through photo-generated domain growth or by generating topological defects, and this impacts the dynamics of the system. However, this nanoscale heterogeneity has not been directly observed. Here we use time- and spectrally resolved coherent X-ray imaging to track the prototypical light induced insulator-to-metal phase transition in vanadium dioxide on the nanoscale with femtosecond time resolution. We show that the early-time dynamics are independent of the initial spatial heterogeneity and observe a 200 fs switch to the metallic phase. A heterogeneous response emerges only after hundreds of picoseconds. Through spectroscopic imaging, we reveal that the transient metallic phase is a highly orthorhombically strained rutile metallic phase, an interpretation that is in contrast to those based on spatially averaged probes. Our results demonstrate the critical importance of spatially and spectrally resolved measurements for understanding and interpreting the transient phases of quantum materials.

cond-mat.str-el↗

arXiv2022

Understanding the onset of surface degradation in LiNiO2 cathodes

Nickel-based layered oxides offer an attractive platform for the development of energy-dense cobalt-free cathodes for lithium-ion batteries but suffer from degradation via oxygen gas release during electrochemical cycling. While such degradation has previously been characterized phenomenologically with experiments, an atomic-scale understanding of the reactions that take place at the cathode surface has been lacking. Here, we develop a first-principles methodology for the prediction of the surface reconstructions of intercalation electrode particles as a function of the temperature and state of charge. We report the surface phase diagrams of the LiNiO2(001) and (104) surfaces and identify surface structures that are likely visited during the first charge and discharge. Our calculations indicate that both surfaces experience oxygen loss during the first charge, resulting in irreversible changes to the surface structures. At the end of charge, the surface Ni atoms migrate into tetrahedral sites, from which they further migrate into Li vacancies during discharge, leading to Li/Ni mixed discharged surface phases. Further, the impact of the temperature and voltage range during cycling on the charge/discharge mechanism is discussed. The present study thus provides insight into the initial stages of cathode surface degradation and lies the foundation for the computational design of cathode materials that are stable against oxygen release.

cond-mat.mtrl-sci↗

arXiv2022

AI-Aided Mapping of the Structure-Composition-Conductivity Relationships of Glass-Ceramic Lithium Thiophosphate Electrolytes

Lithium thiophosphates (LPS) with the composition (Li$_2$S)$_x$(P$_2$S$_5$)$_{1-x}$ are among the most promising prospective electrolyte materials for solid-state batteries (SSBs), owing to their superionic conductivity at room temperature ($>10^{-3}$ S cm$^{-1}$), soft mechanical properties, and low grain boundary resistance. Several glass-ceramic (gc) LPS with different compositions and good Li conductivity have been previously reported, but the relationship between composition, atomic structure, stability, and Li conductivity remains unclear due to the challenges in characterizing non-crystalline phases in experiments or simulations. Here, we mapped the LPS phase diagram by combining first principles and artificial intelligence (AI) methods, integrating density functional theory, artificial neural network potentials, genetic-algorithm sampling, and ab initio molecular dynamics simulations. By means of an unsupervised structure-similarity analysis, the glassy/ceramic phases were correlated with the local structural motifs in the known LPS crystal structures, showing that the energetically most favorable Li environment varies with the composition. Based on the discovered trends in the LPS phase diagram, we propose a candidate solid-state electrolyte composition, (Li$_{2}$S)$_{x}$(P$_{2}$S$_{5}$)$_{1-x}$ ($x\sim{}0.725$), that exhibits high ionic conductivity ($>10^{-2}$ S cm$^{-1}$) in our simulations, thereby demonstrating a general design strategy for amorphous or glassy/ceramic solid electrolytes with enhanced conductivity and stability.

cond-mat.mtrl-sci↗

arXiv2021

Data-driven Approach to Parameterize SCAN+U for an Accurate Description of 3d Transition Metal Oxide Thermochemistry

Semi-local DFT methods exhibit significant errors for the phase diagrams of transition-metal oxides that are caused by an incorrect description of molecular oxygen and the large self-interaction error in materials with strongly localized electronic orbitals. Empirical and semiempirical corrections based on the DFT+U method can reduce these errors, but the parameterization and validation of the correction terms remains an on-going challenge. We develop a systematic methodology to determine the parameters and to statistically assess the results by considering thermochemical data across a set of transition metal compounds. We consider three interconnected levels of correction terms: (1) a constant oxygen binding correction, (2) Hubbard-U correction, and (3) DFT/DFT+U compatibility correction. The parameterization is expressed as a unified optimization problem. We demonstrate this approach for 3d transition metal oxides, considering a target set of binary and ternary oxides. With a total of 37 measured formation enthalpies taken from the literature, the dataset is augmented by the reaction energies of 1,710 unique reactions that were derived from the formation energies by systematic enumeration. To ensure a balanced dataset across the available data, the reactions were grouped by their similarity using clustering and suitably weighted. The parameterization is validated using leave-one-out cross-validation (CV), a standard technique for the validation of statistical models. We apply the methodology to the SCAN density functional. Based on the CV score, the error of binary (ternary) oxide formation energies is reduced by 40% (75%) to 0.10 (0.03) eV/atom. The method and tools demonstrated here can be applied to other classes of materials or to parameterize the corrections to optimize DFT+U performance for other target physical properties.

cond-mat.mtrl-sci↗

arXiv2021

AENET-LAMMPS and AENET-TINKER: Interfaces for Accurate and Efficient Molecular Dynamics Simulations with Machine Learning Potentials

Machine learning potentials (MLPs) trained on data from quantum-mechanics based first-principles methods can approach the accuracy of the reference method at a fraction of the computational cost. To facilitate efficient MLP-based molecular dynamics (MD) and Monte Carlo (MC) simulations, an integration of the MLPs with sampling software is needed. Here we develop two interfaces that link the Atomic Energy Network (ænet) MLP package with the popular sampling packages TINKER and LAMMPS. The three packages, ænet, TINKER, and LAMMPS, are free and open-source software that enable, in combination, accurate simulations of large and complex systems with low computational cost that scales linearly with the number of atoms. Scaling tests show that the parallel efficiency of the ænet-TINKER interface is nearly optimal but is limited to shared-memory systems. The ænet-LAMMPS interface achieves excellent parallel efficiency on highly parallel distributed memory systems and benefits from the highly optimized neighbor list implemented in LAMMPS. We demonstrate the utility of the two MLP interfaces for two relevant example applications, the investigation of diffusion phenomena in liquid water and the equilibration of nanostructured amorphous battery materials.

cond-mat.mtrl-sci↗

arXiv2021

Strategies for the Construction of Machine-Learning Potentials for Accurate and Efficient Atomic-Scale Simulations

Recent advances in machine-learning interatomic potentials have enabled the efficient modeling of complex atomistic systems with an accuracy that is comparable to that of conventional quantum mechanics based methods. At the same time, the construction of new machine-learning potentials can seem a daunting task, as it involves data-science techniques that are not yet common in chemistry and materials science. Here, we provide a tutorial-style overview of strategies and best practices for the construction of artificial neural network (ANN) potentials. We illustrate the most important aspects of (i) data collection, (ii) model selection, (iii) training and validation, and (iv) testing and refinement of ANN potentials on the basis of practical examples. Current research in the areas of active learning and delta learning are also discussed in the context of ANN potentials. This tutorial review aims at equipping computational chemists and materials scientists with the required background knowledge for ANN potential construction and application, with the intention to accelerate the adoption of the method, so that it can facilitate exciting research that would otherwise be challenging with conventional strategies.

cond-mat.mtrl-sci↗

arXiv2020

Predicting the Activity and Selectivity of Bimetallic Metal Catalysts for Ethanol Reforming using Machine Learning

Machine learning is ideally suited for the pattern detection in large uniform datasets, but consistent experimental datasets on catalyst studies are often small. Here we demonstrate how a combination of machine learning and first-principles calculations can be used to extract knowledge from a relatively small set of experimental data. The approach is based on combining a complex machine-learning model trained on a computational library of transition-state energies with simple linear regression models of experimental catalytic activities and selectivities from the literature. Using the combined model, we identify the key C-C bond scission reactions involved in ethanol reforming and perform a computational screening for ethanol reforming on monolayer bimetallic catalysts with architectures TM-Pt-Pt(111) and Pt-TM-Pt(111) (TM = 3d transition metals). The model also predicts four promising catalyst compositions for future experimental studies. The approach is not limited to ethanol reforming but is of general use for the interpretation of experimental observations as well as for the computational discovery of catalytic materials.

cond-mat.mtrl-sci↗

arXiv2020

Efficient Training of ANN Potentials by Including Atomic Forces via Taylor Expansion and Application to Water and a Transition-Metal Oxide

Artificial neural network (ANN) potentials enable the efficient large-scale atomistic modeling of complex materials with near first-principles accuracy. For molecular dynamics simulations, accurate energies and interatomic forces are a prerequisite, but training ANN potentials simultaneously on energies and forces from electronic structure calculations is computationally demanding. Here, we introduce an efficient alternative method for the training of ANN potentials on energy and force information based on an extrapolation of the total energy via a Taylor expansion. By translating the force information to approximate energies, the quadratic scaling with the number of atoms exhibited by conventional force-training methods can be avoided, which enables the training on reference data sets containing complex atomic structures. We demonstrate for different materials systems, clusters of water molecules, bulk liquid water, and a lithium transition-metal oxide, that the proposed force-training approach provides substantial improvements over schemes that train on energies only. Including force information for training reduces the size of the reference data sets required for ANN potential construction, increases the transferability of the potential, and generally improves the force prediction accuracy. For a set of water clusters, the Taylor-expansion approach achieves around 50% of the force error improvement compared to the explicit training on all force components, at a much smaller computational cost. The alternative force training approach thus simplifies the construction of general ANN potentials for the prediction of accurate energies and interatomic forces for diverse types of materials, as demonstrated here for water and a transition-metal oxide.

physics.comp-ph↗

arXiv2019

Atomic-scale factors that control the rate capability of nanostructured amorphous Si for high-energy-density batteries

Nanostructured Si is the most promising high-capacity anode material to substantially increase the energy density of Li-ion batteries. Among the remaining challenges is its low rate capability as compared to conventional materials. To understand better what controls the diffusion of Li in the amorphous Li-Si alloy, we use a novel machine-learning potential trained on more than 40,000 ab-initio calculations and nanosecond-scale molecular dynamics simulations, to visualize for the first time the delithiation of entire LiSi nanoparticles. Our results show that the Si host is not static but undergoes a dynamic rearrangement from isolated atoms, to chains, and clusters, with the Li diffusion strongly governed by this Si rearrangement. We find that the Li diffusivity is highest when Si segregates into clusters, so that Li diffusion proceeds via hopping between the Si clusters. The average size of Si clusters and the concentration range over which Si clustering occurs can thus function as design criteria for the development of rate-improved anodes based on modified Si.

cond-mat.dis-nn↗

arXiv2018

An L$_0$L$_1$-norm compressive sensing paradigm for the construction of sparse predictive lattice models using mixed integer quadratic programming

First-principles based lattice models allow the modeling of ab initio thermodynamics of crystalline mixtures for applications such as the construction of phase diagrams and the identification of ground state atomic orderings. The recent development of compressive sensing approaches for the construction of lattice models has further enabled the systematic construction of sparse physical models without the need for human intuition other than requiring the compactness of effective cluster interactions. However, conventional compressive sensing based on L1-norm regularization is strictly only applicable to certain classes of optimization problems and is otherwise not guaranteed to generate optimally sparse and transferable results, so that the method can only be applied to some materials science applications. In this paper, we illustrate a more robust L0L1-norm compressive-sensing method that removes the limitations of conventional compressive sensing and generally results in sparser lattice models that are at least as predictive as those obtained from L1-norm compressive sensing. Apart from the theory, a practical implementation based on state-of-the-art mixed-integer quadratic programming (MIQP) is proposed. The robustness of our methodology is illustrated for four different transition-metal oxides with relevance as battery cathode materials: Li2xTi2(1-x)O2, Li2xNi2yO2, MgxCr2O4, and NaxCrO2. This method provides a practical and robust approach for the construction of sparser and more predictive lattice models, improving on the compressive sensing paradigm and making it applicable to a much broader range of applications.

physics.comp-ph↗

arXiv2018

Hidden structural order controls Li-ion transport in cation-disordered oxides for rechargeable lithium batteries

Crystal structures play a vital role in determining materials properties. In Li-ion cathodes, the crystal structure defines the dimensionality and connectivity of interstitial sites, thus determining Li-ion diffusion kinetics. While a perfect crystal has infinite structural coherence, a class of recently discovered high-capacity cathodes, Li-excess cation-disordered rocksalts, falls on the other end of the spectrum: Their cation sublattices are assumed to be randomly populated by Li and transition metal ions with zero configurational coherence based on conventional X-ray diffraction, such that the Li transport is purely determined by statistical effects. In contrast to this prevailing view, we reveal that cation short-range order, hidden in diffraction, is ubiquitous in these long-range disordered materials and controls the local and macroscopic environments for Li-ion transport. Our work not only discovers a crucial property that has previously been overlooked, but also provides new guidelines for designing and engineering disordered rocksalts cathode materials.

cond-mat.mtrl-sci↗

arXiv2018

Constructing first-principles phase diagrams of amorphous LixSi using machine-learning-assisted sampling with an evolutionary algorithm

The atomistic modeling of amorphous materials requires structure sizes and sampling statistics that are challenging to achieve with first-principles methods. Here, we propose a methodology to speed up the sampling of amorphous and disordered materials using a combination of a genetic algorithm and a specialized machine-learning potential based on artificial neural networks (ANN). We show for the example of the amorphous LiSi alloy that around 1,000 first-principles calculations are sufficient for the ANN potential assisted sampling of low-energy atomic configurations in the entire amorphous LixSi phase space. The obtained phase diagram is validated by comparison with the results from an extensive sampling of LixSi configurations using molecular dynamics simulations and a general ANN potential trained to ~45,000 first-principles calculations. This demonstrates the utility of the approach for the first-principles modeling of amorphous materials.

cond-mat.dis-nn↗

arXiv2017

Efficient and Accurate Machine-Learning Interpolation of Atomic Energies in Compositions with Many Species

Machine-learning potentials (MLPs) for atomistic simulations are a promising alternative to conventional classical potentials. Current approaches rely on descriptors of the local atomic environment with dimensions that increase quadratically with the number of chemical species. In this article, we demonstrate that such a scaling can be avoided in practice. We show that a mathematically simple and computationally efficient descriptor with constant complexity is sufficient to represent transition-metal oxide compositions and biomolecules containing 11 chemical species with a precision of around 3 meV/atom. This insight removes a perceived bound on the utility of MLPs and paves the way to investigate the physics of previously inaccessible materials with more than ten chemical species.

cond-mat.mtrl-sci↗

arXiv2017

The electronic-structure origin of cation disorder in transition-metal oxides

Cation disorder is an important design criterion for technologically relevant transition-metal (TM) oxides, such as radiation-tolerant ceramics and Li-ion battery electrodes. In this letter, we use a combination of first-principles calculations, normal mode analysis, and band-structure arguments to pinpoint a specific electronic-structure effect that influences the stability of disordered phases. We find that the electronic configuration of a TM ion determines to which extent the structural energy is affected by site distortions. This mechanism explains the stability of disordered phases with large ionic radius differences and provides a concrete guideline for the discovery of novel disordered compositions.

cond-mat.mtrl-sci↗