arXiv subjects

Norimasa Ozaki

Publications and source records attributed to Norimasa Ozaki.

11 recordsLinked to original sources

arXiv2026

Cumulative X-ray Damage in Bismuth Selenide Examined by Simultaneous TXM and XRD

Bismuth selenide (Bi2Se3) is a topological insulator with potential applications in thermoelectrics, spintronics, and optoelectronics. However, its response to radiation remains poorly understood. We investigate cumulative X-ray damage in Bi2Se3 using simultane- ous transmission X-ray microscopy (TXM) and X-ray diffraction (XRD) at the Pohang Accelerator Laboratory X-Ray Free Electron Laser (PAL-XFEL) over 27,000 successive pulses. We observe distinct damage mechanisms: rapid hole formation via vaporization within 100 pulses, followed by slower grain refinement and material sputtering over thousands of thermal cycles. Williamson-Hall analysis reveals a progressive transformation from single-crystal to nanocrystalline structure, with grain sizes decreasing from mi- cron to nanometer scale. Finite-element modeling confirms that X-rays penetrate 13.47 μm, driving local temperatures above 1600 K with subsequent cooling between pulses. Scanning electron microscopy identifies three characteristic morphologies correspond- ing to different thermal histories: sputter streaks, prismatic crystals, and disordered microcrystals. Our results demonstrate that grain-boundary formation creates a feedback mechanism that accelerates damage in later pulses. This work establishes a method- ology for studying radiation damage across multiple length scales and provides insight into topological insulator stability under extreme conditions

cond-mat.mtrl-sci↗

arXiv2026

Pulse magnet of 10 T for power laser experiments with x-ray free-electron laser diagnostics

The importance of investigating magnetized plasmas/solids in extreme conditions has grown over the last decades, particularly in the field of high energy density physics (HEDP), such as laboratory astrophysics and inertial confinement fusion. However, up to now, the unique capabilities of an X-ray free-electron laser (XFEL), such as high brilliance and low divergence have never been exploited for this type of research. In this paper, we present the first platform developed at SACLA, Japan, that combines a high-power optical laser for generating matter under extreme conditions of pressure and temperature, an XFEL probe, and an external magnetic field. The high current is produced using a 2 kV, 4.8 kJ pulsed power system giving a maximum current of 10 kA which is synchronized with the optical laser and XFEL in a vacuum environment. It flows through a split-pair coil to generate a high magnetic field (10 T at 6 kA) which has 1 cm access every 45$^{\circ}$ in the equatorial plane and 90$^{\circ}$ in the poloidal one. This platform offers new opportunities to study high-energy-density matter in strong magnetic fields, including shock propagation, instability growth, and turbulent plasma dynamics.

physics.plasm-ph↗

arXiv2026

High Entropy Alloy under Shock Compression: Optical-Pump X-Ray-Probe

High entropy alloys (HEAs) are multi-principal-element alloys designed for tailorable mechanical performance and have been attracting significant engineering interest, yet their fundamental behaviour under extreme dynamic conditions, such as shock loading, remains unexplored. Here, we report laser-shock experiments on two different types of 1-micrometers-thick HEA microfilms, CuPdAgPtAu and CrFeCoNiCuMo, on 25-micrometers-thick black-Kapton ablator driven by a high intensity laser pulse (532 nm, 5 ns, 16 J, 0.5-mm diameter focal spot) and probed by an X-ray free electron laser (XFEL) pulse (12 keV, 7 fs). Time-resolved X-ray diffraction (XRD) shows the formation of a transient phase with a lattice compression up to 5.1% of the CuPdAgPtAu HEA along the (111) plane; this transient compressed phase existed for 0.3 ns. The impedance matching Hugoniot analysis estimated a shock pressure of 55 +/- 6 GPa in the HEA film, while Au- and Fe-based equations of state (EoS) modelling predict 80 GPa (0.8 MBar) at the free HEA surface. The free HEA surface reached maximum velocities of ~ 5 km/s as recorded from in situ monitoring with the velocity interferometry system for any reflector (VISAR) imaging. These initial HEA results show the suitability of HEA sample preparation and XFEL-based XRD characterisation under extreme shock loading, and are promising for experimental determination of the EoS of this emerging class of materials (beamtime proposal No.: 2024A8503 for a 6-hour preliminary experiment).

cond-mat.mtrl-sci↗

arXiv2025

Structural evolution of iron oxides melts at Earth's outer-core pressures

Oxygen and other light elements comprise up to 5 wt% of the Earth's outer-core, and may significantly influence its physical properties and the operation of the geodynamo. Here we report in situ x-ray diffraction measurements of Fe, Fe + 4.5 FeO (atomic proportion), and Fe2O3 melts at 177-438 GPa, achieved using laser-driven shock compression at an x-ray free-electron laser. The melts exhibit Fe-O coordination numbers between 4.0(0.4) and 4.5(0.4), indicating predominantly four-fold coordination environments. These coordination states are significantly smaller than those of Fe-bearing lower-mantle phases such as bridgmanite and ferropericlase. Shorter Fe-Fe interatomic distances in compressed iron oxide melts drive the denser packing relative to ambient melts, while the structural differences between Fe + 4.5 FeO and Fe2O3 melts under shock indicate that the oxidation state modulates oxygen solubility in liquid Fe. At around 177 GPa (380 km below the core-mantle boundary), Fe2O3 melts exhibit higher Fe-O coordination, suggesting that local variations in oxygen content could contribute to the stratification in the uppermost outer-core inferred from seismological and geomagnetic observations.

cond-mat.mtrl-sci↗

arXiv2025

Phase transitions of eutectic high entropy alloy AlCoCrFeNi2.1 under shock compression

High entropy alloys (HEAs) are a new class of metals that exhibit unique mechanical performance. Among HEAs, additively manufactured eutectic high entropy alloys (AM-EHEAs) have recently emerged as candidate materials for use in extreme conditions due to their simultaneous high strength and ductility. However, the deformation and structural evolution of AM-EHEAs under conditions of high pressure have not been well characterized, limiting their use in extreme applications. We present dynamic compression experiments and molecular dynamics simulations studying the structural evolution of AM-EHEA AlCoCrFeNi2.1 when compressed to pressures up to 400 GPa. Our in-situ X-ray diffraction measurements capture the appearance of fcc and bcc phases at different pressure conditions, with pure- and mixed-phase regions. Understanding the phase stability and structural evolution of the AM EHEA offers new insights to guide the development of high-performance complex materials for extreme conditions.

cond-mat.mtrl-sci↗

arXiv2025

Pushing the limits of flow strength in diamond

Extreme pressures and temperatures create conditions that allow even hard and brittle materials to deform plastically. Despite extensive research, the upper limits of flow strength, the resistance to plastic flow, remain uncertain, and the mechanisms driving deformation at the relevant stresses are a subject of debate. Using femtosecond in situ X-ray diffraction experiments and large-scale molecular dynamics simulations, we demonstrate that stacking fault-mediated strengthening enables shock-compressed nano-polycrystalline diamond to achieve a peak flow strength of 107+-5 GPa at a stress of 227+-8 GPa. Our findings show that extreme conditions can unlock unusual strength via mechanisms that can be used as design tools in targeted applications.

cond-mat.mtrl-sci↗

arXiv2024

Comment on "Comments regarding "Transonic dislocation propagation in diamond" by Katagiri, et al. (Science 382, 69-72, 2023)" by Hawreliak, et al. (arXiv:2401.04213)

In their comment (1), Hawreliak et al. claims that our observation of stacking fault formation and transonic dislocation propagation in diamond (2) is not valid as they interpret the observed features as cracks. In this response letter, we describe our rationale for interpreting the observed features as stacking faults. We also address other points raised in their comments, including the clarifications of how the results of Makarov et al. (3) are not in conflict with our study.

cond-mat.mtrl-sci↗

arXiv2024

Formation of high-aspect-ratio nanocavity in LiF crystal using a femtosecond of x-ray FEL pulse

Sub-picosecond optical laser processing of metals is actively utilized for modification of a heated surface layer. But for deeper modification of different materials a laser in the hard x-ray range is required. Here, we demonstrate that a single 9-keV x-ray pulse from a free-electron laser can form a um-diameter cylindrical cavity with length of ~1 mm in LiF surrounded by shock-transformed material. The plasma-generated shock wave with TPa-level pressure results in damage, melting and polymorphic transformations of any material, including transparent and non-transparent to conventional optical lasers. Moreover, cylindrical shocks can be utilized to obtain a considerable amount of exotic high-pressure polymorphs. Pressure wave propagation in LiF, radial material flow, formation of cracks and voids are analyzed via continuum and atomistic simulations revealing a sequence of processes leading to the final structure with the long cavity. Similar results can be produced with semiconductors and ceramics, which opens a new pathway for development of laser material processing with hard x-ray pulses.

physics.plasm-ph↗

arXiv2024

Shock-driven amorphization and melt in Fe$_2$O$_3$

We present measurements on Fe$_2$O$_3$ amorphization and melt under laser-driven shock compression up to 209(10) GPa via time-resolved in situ x-ray diffraction. At 122(3) GPa, a diffuse signal is observed indicating the presence of a non-crystalline phase. Structure factors have been extracted up to 182(6) GPa showing the presence of two well-defined peaks. A rapid change in the intensity ratio of the two peaks is identified between 145(10) and 151(10) GPa, indicative of a phase change. Present DFT+$U$ calculations of temperatures along Fe$_2$O$_3$ Hugoniot are in agreement with SESAME 7440 and indicate relatively low temperatures, below 2000 K, up to 150 GPa. The non-crystalline diffuse scattering is thus consistent with the - as yet unreported - shock amorphization of Fe$_2$O$_3$ between 122(3) and 145(10) GPa, followed by an amorphous-to-liquid transition above 151(10) GPa. Upon release, a non-crystalline phase is observed alongside crystalline $α$-Fe$_2$O$_3$. The extracted structure factor and pair distribution function of this release phase resemble those reported for Fe$_2$O$_3$ melt at ambient pressure.

cond-mat.mtrl-sci↗

arXiv2023

Transonic Dislocation Propagation in Diamond

The motion of line defects (dislocations) has been studied for over 60 years but the maximum speed at which they can move is unresolved. Recent models and atomistic simulations predict the existence of a limiting velocity of dislocation motions between the transonic and subsonic ranges at which the self-energy of dislocation diverges, though they do not deny the possibility of the transonic dislocations. We use femtosecond x-ray radiography to track ultrafast dislocation motion in shock-compressed single-crystal diamond. By visualizing stacking faults extending faster than the slowest sound wave speed of diamond, we show the evidence of partial dislocations at their leading edge moving transonically. Understanding the upper limit of dislocation mobility in crystals is essential to accurately model, predict, and control the mechanical properties of materials under extreme conditions.

cond-mat.mtrl-sci↗

arXiv2023

Simultaneous Bright- and Dark-Field X-ray Microscopy at X-ray Free Electron Lasers

The structures, strain fields, and defect distributions in solid materials underlie the mechanical and physical properties across numerous applications. Many modern microstructural microscopy tools characterize crystal grains, domains and defects required to map lattice distortions or deformation, but are limited to studies of the (near) surface. Generally speaking, such tools cannot probe the structural dynamics in a way that is representative of bulk behavior. Synchrotron X-ray diffraction based imaging has long mapped the deeply embedded structural elements, and with enhanced resolution, Dark Field X-ray Microscopy (DFXM) can now map those features with the requisite nm-resolution. However, these techniques still suffer from the required integration times due to limitations from the source and optics. This work extends DFXM to X-ray free electron lasers, showing how the $10^{12}$ photons per pulse available at these sources offer structural characterization down to 100 fs resolution (orders of magnitude faster than current synchrotron images). We introduce the XFEL DFXM setup with simultaneous bright field microscopy to probe density changes within the same volume. This work presents a comprehensive guide to the multi-modal ultrafast high-resolution X-ray microscope that we constructed and tested at two XFELs, and shows initial data demonstrating two timing strategies to study associated reversible or irreversible lattice dynamics.

cond-mat.mtrl-sci↗